E4200 Mac connects but not PC after crash
We had a power failure. Connection Wi - Fi disturbed and has not corrected itself as in the past.
A MAC and android os phone will connect but not PC with different operating systems.
Wired computers will connect and go on the internet but not when try wireless on windows PC.
I have a comcast modem and a router wireless e4200.
Tried the re-engining of the modem and the router.
Tried to unplug Cisco on computers and then reconnect to wireless connection.
Sometimes laptops will discover the excellent show and Cisco of the signal power but does not connect.
Wireless is enabled on laptop computers.
Do not know what has changed this causes for the victory of the PC only. (IP? etc?)
Any help is appreciated.
Thank you.
Thank you for the answers.
I did a factory reset within the connection on the router.
After resetting my settings it works fine.
No idea what scattered settings.
Tags: Linksys Routers
Similar Questions
-
Ipad Cisco ipsec VPN connects but not access to the local network
Hi guys,.
I am trying to connect our ipads to vpn to access network resources. IPSec cisco ipad connects but not lan access and cannot ping anything not even not the interfaces of the router.
If I configure the vpn from cisco on a laptop, it works perfectly, I can ping all and can access resources on the local network if my guess is that the traffic is not going in the tunnel vpn between ipad and desktop.
Cisco 877.
My config is attached.
Any ideas?
Thank you
Build-in iPad-client is not useful to your configuration.
You have three options:
(1) remove the ACL of your vpn group. Without split tunneling client will work.
2) migrate legacy config crypto-map style. Here, you can use split tunneling
3) migrate AnyConnect.
The root of the problem is that the iPad Gets the split tunneling-information. But instead of control with routing traffic should pass through the window / the tunnel and which traffic is allowed without the VPN of the iPad tries to build a set of SAs for each line in your split-tunnel-ACL. But with the model-virtual, SA only is allowed.
-
Hello
on 11g on HP UNIX.
Can not understand: connected but not connected:
Any idea?sqlplus sys@+ASM as sysdba Enter password: ERROR: ORA-12154: TNS : Enter user-name: sys as sysdba Enter password: Connected. SQL> select * from v$instance; select * from v$instance * ERROR at line 1: ORA-01012: not logged on
Thank you.sqlplus sys@+ASM as sysdba
ORA-12154: TNS:
Enter the user name: sys as sysdbaSQL > select * from v$ instance;
Select * from v$ instance
*
ERROR on line 1:
ORA-01012: not connectedYou connect to the instance by TNS connect descriptot ASM?
Which alert log file shows?tnsping + ASM
-
Printer connected to the network, MG5320 will print without mac fault but not with windows 7
Canon MG5320 printer works great and I am able to print wirlessly of my mac mini which is 3 rooms away from the printer, but my windows 7 laptop is right next to the printer can print only if USB is connected and not wireless. I recently tried to separate the printer and the computer laptop windows 7, placing the printer rooms 2 far but the custom still pc wireless printing. I don't know what to do now?
Hello smiles917.
It may be possible that the Windows 7 computer is configured to use the USB port and not on the wireless connection.
Uninstall and reinstall the drivers should fix this problem. Please, perform the following steps:
1. open the control panel from your desktop or the Start Menu.
2. open programs and features.
3 uninstall the drivers MG5300/MP and the Canon IJ Network Tool.
4. close all open windows.
Once this has been done, please visit our Web site at the following address to download and install the latest driver for MP for Windows 7.
-
Excite PRO 3G connection does not work after last update Android v4.3
Hello
I live in Italy and last Sunday (26 January) my excited PRO Tablet (model AT10LE - A - 10 H) received version Android 4.3.201121220.35.
After restart my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".
My sim card is ok. I used this sim card before the system update and I don't have a problem with Android 4.2.2.
Please help me.
Thank you> After reboot my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".
Go to mobile network settings and search again for the 3G network.
I had a similar problem with my Android Smartphone and my o2 provider
I started to search for new, so I chose the O2 again and then I could solve the problem.In the case where this does not work for you, recommend you to reset the default Tablet (factory settings)
-
Keyboard does not. Able to use for the connection does not work after that.
The keyboard works to connect. But does not work after that.
Hello Sml15,
The embedded screen keyboard should still work even if the physical keyboard isn't.
Try this first...
Press and hold the Windows key and the space bar.
If no joy, go to the search bar and with the built-in keyboard, type the filter keys and choose key filter on or off.
In the window of the ease of access to the keyboard, disable FilterKeys.
If all goes well, which will fix the problem.
Let me know how it turns out.
-
Windows 7 Build 7601, now says not genuine after crash
Bought/installed Win7 Pro on my (aging) machine time Jan/Feb & activated product.
After a week away recently, my PC did not boot - just crashed. Last known good configuration did work, catering to the highest point due to a registry restore problem. Anyway, forced the cancellation by renaming config & software in the \system32 folder.
Then machine again, I'm immediately went to Windows update to ensure that it was up-to-date & then had "Windows 7 Build 7601, this copy is not genuine." Had been authorized for about the last 7 months.
Have tried to change the key product & scoring even once again. As well as the uninstall & reinstall it again once, but no change.
I already download Win10 install files when the option popped up; Maybe I should have completed the installation. Although it may have failed.
Anyway, here, is out of the tool of diagnosis of MGA. I hope someone can advise:
Thanks in advance.
----------------
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 50
Code of Validation caching online: 0xc004c4a2
Windows product key: *-*-*-*-9T9KP
Windows product key hash: FqSWTguNoybw3tVSPd8O8CBPCrI =
Windows product ID: 55041-152-1911045-86235
Windows product ID type: 6
Windows license type: Volume MAK
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {729FBCB9-07DE-4431-B8AA-769A3CA07816} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.150715 - 0600
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{729FBCB9-07DE-4431-B8AA-769A3CA07816} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 64 *-*-*-*-BATH 55041-152-1911045-86235 6 S-1-5-21-3698907309-127372443-2681329950 MICRO-STAR INTERNATIONAL CO., LTD MS-7360 American Megatrends Inc.. V1.10 20081111000000.000000 + 000ECB23E07018400F8 0809 0409 GMT Standard Time(GMT+00:00) 0 3 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, channel VOLUME_MAK
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-152-191104-03-2057-7601.0000-2452015
Installation ID: 003795222413929355389113005742479776534552881271123680
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: 9T9KP
License status: Notification
Reason for the notification: 0xC004F200 (non-genuine).
Remaining Windows rearm count: 4
Trust time: 23:02:42 09/11/2015Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0xC004C4A2
Beyond: 0 x 0000000000000000
Event timestamp: 9:11:2015 23:34
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current HWID of Hash: NgAAAAEABgABAAEAAAACAAAAAQABAAEA6GEeXVi/dOYGnuSpcrToGIj90v0wjoYHTEH0TExYActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC0906 APIC 111108
FACP 111108 FACP0906
MCFG 111108 OEMMCFG
LASRYVITRAGE OEMB0906 111108
GSCI 111108 GMCHSCII spoke with MS support. The representative has essentially kept repeating that the product key was not for home/use; later mentioned he has a license of the company & had been used several times.
However, he had no answer to come as to how is it this had been works well for 8 months & problems have emerged since my start/disk/registry problems.
It takes time for this abuse be detected by Microsoft because it is a Multiple Activation key (a lot of PC have or will have the same problem) that very probably activated too many times (each key has an activation limit)
I also tried to find more information as to where the key was first used / details of other activations (in the case where was my repeated recent attempts during the activation/validation was just suspended); but only repeated representative key is blocked.
They may not know / have a record of when it has been used first.
Y at - it other advice? My Win7 installation has been very recently posted just grab the update Win10 install files; However, I'm guessing that it's probably not worth trying to go down that path right now?
Since you have not a valid Windows 7 key from the upgrade of Windows 10 can install but most probably (but not immediately) detects the invalid key and also go "(Non authentique)."
Of course, if it turns out that I need to splash £100 on a 'get genuine' license then I will - but was hoping to get data confirming the situation [seems that my previous purchase by Amazon will not get any farther].
If this MAK key was purchased by a third party seller to Amazon for their web site at Amazon report. At the very least, they should block / prevent the seller by using their (Amazon) web site.
Or else I'll watch Win8.1 (& get top of what to Win10 update as soon as possible) or Win10 at home; Although I had barely begun to use Win7 XP!
Since you said that you have an aging PC I would stick with Windows 7 (support ends January 14, 2020).
One thing, you can try if you are still interested Windows 10 (after the backup of your important data files is to install Windows 10 via the GWN icon on the taskbar or the media download: https://www.microsoft.com/en-us/software-download/windows10 )
This will tell you at least if Windows 10 fully supports (graphics, Audio, keyboard and mouse, access Internet, etc.) your PC.
J W Stuart: http://www.pagestart.com
-
I wanted to delete the photos from icloud on my mac to give me a bit more memory, but not out of my ipad, so I turned off the icloud on my mac. I disabled icloud sharing on my ipad before doing this it will delete them off my ipad?
All you should have to do is stop iCloud photo syncing on the Mac. Then, when you delete photos, it will not sync to iCloud.
-
Transfer works of Mac iOS but not iOS for Mac
I get the transfer icon on my screen lock and the bottom of multitasking on my iPhone 6 and first generation iPad look so I have a compatible application Handoff open on my new Macbook or other iOS devices, but I never see a transfer icon on the dock of my Macbook one of my iOS devices. My Macbook is my only Mac, so these are the only devices with that I can test.
My MacBook is OS x 10.11.2 and my iPhone and iPad are both running iOS 9.2 (at this time as I write this, here are the latest updates). They all are signed on the same iCould account, on the same WiFi network and have bluetooth switched on.
Apple offers signature in and out of the iCloud, just to see if that fixes it. Given the way depends on OS X is on iCloud, which seems to be a very drastic step to take just to see if maybe he could do something. I think live without transfer would be preferable to redownloading my library of Photos to iCloud together and spend days trying to figure what functions had off and cross the two factor authentications endless to reactivate them.
So, just to be clear, my problem is that my iOS devices receive transfers from my Macbook, but my Macbook is not receive transfers of my iOS devices.
Yes, me too. Transfer works between handheld and portable handheld computer devices, but not the direction of one I really need, Pocket for your laptop. It works for my husband from his iPhone to the iMac, however.
-
Network connection does not work after reinstalling Windows XP.
Original title: problems with reinstalling XP.
I had re format and re install windows xp but now my network connection does not work. I have no IP address, even if my router and the pc are on DHCP. Device Manager tells me that the controller Ethrnet on the motherboard has no drivers, but I can't find a driver. Any thoughts appreciated.
Hi John Fisher_888,.
You can download & install the drivers for the adapter from this link & check if it helps
Hope the helps of information.
Please post back and we do know. -
Wrt54g Linksys Wireless Router - connected but not display page
Halo!
I have a Linksys WRT54G wireless router - I was able to connect to the wireless connection, but there is no display of the page in the browser.
What seems to be the problem here?
TIA,
wilardboi
Please reset the router and reconfigure:
1. hold the reset for 30 seconds button.
2. then disconnect the Dungeon can now hold the reset button for
another 30 seconds.
3. plug back in the power and keep the reset button pressed
for 30 seconds.
4. release the reset button.Open the configuration of router with 192.168.1.1 page... White-username and password: admin
To configure the wireless router.
For wireless settings, follow these steps: -.
Click on the Wireless tab
-Here the wireless network mode must be mixed
-Provide any name in the name box of the wireless network (SSID), while
without space between the two cases.
-11 wireless channel
- And wireless SSID broadcast should be enabled and then clickSave
Parameters.
Please take note of the name of the wireless network (SSID) because it is the '
Network identifier.
For wireless security: -.
Now click the sub-tab under wireless > wireless security.
Change the mode of WEP wireless security
Encryption must be 64-bit.
Let the empty password, do not type in anything whatsoever.
And under type WEP Key 1 in all 10 digits please. Click Save
Parameters.
Please note the 1 WEP key as it comes to the security key for the
Wireless network. -
I use 5.0.07.0440 - k9 vpn Cisco and Cisco vpn 5.0.07.0290 - k9 both version on our 8.1 Windows Mobile pro.
VPN connected successfully, but not remote access network and receive no ping.But when I try with wifi and vpn, then good job.
Please help me as soon as possible.
Thank you
SanjibIt is very problematic on Windows 8 and EOL now.
Kind regards
Nehmaan
-
I have a friend at work, the user account of whose son works well but whose own user account does not work. It can connect, but then the screen seems to keep refreashing. The taskbar appears as a bar grey which appears and disappears in time with its store of ms, desktop and icons to help hp, this happens so fast that it is impossible to click on the desktop icon / pic to enter his office. I guess that he messed up his account settings. R it y of drastic solutions - no obviouse. TIA
Hello
Given that the other account works fine, I think the user in question account is corrupted.
If the issue occurred recently, then you can try using System Restore and check if that helps.
Performing a system restore returns the system files and settings previously uncorrupted State.
How to restore, refresh or reset your PC
Ignore: Refresh and reset of the above article.
The best way will be to create a new user account and start again.
Visit this link to learn more about creating a new user account in Windows 8.
It will be useful. Please let us know the results.
-
RTMP server connected, but not video in the player. HTTP works very well
Hello
Here, a problem, I put http server which is connect and video game,.
But server rtmp connected but the video does not.
Trace of information :
trace (event.info.code) = NetStream.Play.Reset, NetStream.Play.Start (output in flash)
http Host
------------------
var videoURL:String = "http://www.helpexamples.com/flash/video/cuepoints.flv"; var connection:NetConnection; var stream:NetStream; var video:Video = new Video(); NetConnectionExample(); function NetConnectionExample() { connection = new NetConnection(); connection.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler); connection.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler); connection.connect("null"); } function netStatusHandler(event:NetStatusEvent):void { switch (event.info.code) { case "NetConnection.Connect.Success" : connectStream(); break; case "NetStream.Play.StreamNotFound" : trace("Stream not found: " + videoURL); break; } } function securityErrorHandler(event:SecurityErrorEvent):void { trace("securityErrorHandler: " + event); } function connectStream():void { var stream:NetStream = new NetStream(connection); stream.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler1); theVideo.attachNetStream(stream); stream.play(videoURL); addChild(theVideo); } function netStatusHandler1(event:NetStatusEvent) { trace(event.info.code); } function onMetaData(info:Object):void { trace("metadata: duration=" + info.duration + " width=" + info.width + " height=" + info.height + " framerate=" + info.framerate); } function onCuePoint(info:Object):void { trace("cuepoint: time=" + info.time + " name=" + info.name + " type=" + info.type); }
Host RTMP
------------------
var videoURL:String = "filename.flv"; var connection:NetConnection; var stream:NetStream; var video:Video = new Video(); NetConnectionExample(); function NetConnectionExample() { connection = new NetConnection(); connection.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler); connection.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler); connection.connect("rtmp://servername.host.com/foldername"); } function netStatusHandler(event:NetStatusEvent):void { switch (event.info.code) { case "NetConnection.Connect.Success" : connectStream(); break; case "NetStream.Play.StreamNotFound" : trace("Stream not found: " + videoURL); break; } } function securityErrorHandler(event:SecurityErrorEvent):void { trace("securityErrorHandler: " + event); } function connectStream():void { var stream:NetStream = new NetStream(connection); stream.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler1); theVideo.attachNetStream(stream); stream.play(videoURL); addChild(theVideo); } function netStatusHandler1(event:NetStatusEvent) { trace(event.info.code); } function onMetaData(info:Object):void { trace("metadata: duration=" + info.duration + " width=" + info.width + " height=" + info.height + " framerate=" + info.framerate); } function onCuePoint(info:Object):void { trace("cuepoint: time=" + info.time + " name=" + info.name + " type=" + info.type); }
I think that with rtmp you want to delete the file suffix... so try:
var videoURL:String = "filename";
-
It is one their recent. Worked well 4 days ago. for the last 3 days that I can go to Windows live (my e-mail account), I can connect, but that's all. When I click on my email, or any tab, tab nothing happens. I can go online with Windows Exployer and it works fine.
Adblock Plus blocks may be too
Update your subscriptions in 'Adblock Plus '.
See "What to do when Adblock Plus blocks too" breast of the following:
Maybe you are looking for
-
Hi all I was wondering if someone could help me. I'm looking for a script to be run as a service, or from the inside of the Keynote, which does the following: for each text box in the main file. -Selects all text in the text box -sets the option to u
-
I'm not able to update my windows Vista. When I click update it says this: WindowsUpdate_80244008.What should I do to fix this?
-
I get messages that Windows is installing updates (1 of 2) before stopping. Updates do NOT & Windows stops only to give the same message the next time that I stop.
-
problems with windows and services updates
Cannot install the update of security for Microsoft .NET Framework, Version 1.1 Service Pack 1 (KB929729) - I tried to download directly from the Microsoft Web site, but when it came to run the installer I tells me that "Windows Installer has stopped
-
After installing this game on a dell Inspiron 1545 computer, when I try to run the game, it starts to market and then, this error message "Error during initialization: failed to load fileSysCheck.cfg Make sure that Call of Duty: Modern Warfare 3 is r