Printer appears in devices not specified

Similar Questions

• Apple iPod appears as a device not specified in XP

  I plug my ipod usb driver nothing comes up and the machine did not read, I went in devices and printers in Control Panel to start, and noticed he was not specified so I right click on it, went int o properties then it came with harware up above I click on it and it went itno properties if I click on that are entered in pilot and said the necessary driver update so I updated, but then the said device is working properly, but then I noticed poped upward in another unspecified as ipod and I click it and it says MTP. USB and I noticed that the device cannot start when I right click on it and it came with troble shoot wat should I do to download so it can come back to my itunes and when I stick the device in usb to computer to read...?

  Hi reecebaillie,

  ·         If it works much earlier?

  ·         Other devices get detected?

  ·         What is the exact message that you see in Device Manager?

  Check to see if the following is useful.

  Method 1: To update the computer with the latest chipset drivers and check the issue. Log computer manufacturer site to do so.

  Method 2: Check to see if this article helps you.

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

  Method 3: Reinstall the USB controllers. Follow this link to do this.

  Advanced troubleshooting tips for General USB for Windows XP problems

  See also:

  Explanation of error codes generated by Device Manager in Windows XP Professional

• In Printer preferences group policy: printer appears but does not define itself by default

  People,

  I have my shared network printer installation group policy preferences. I have ensured that the Restrictions point and print are disabled in the parts of the user and the police computer. Each preference has a targeting rule that identifies computer names to apply this printer too and also users run in the security context is selected, both the game as default printer checkbox is checked. Mappings check only 1 printer is defined as the default value with pc.

  When a computer maps the printer on the initial user connection (IE when their roaming profile is created), it appears in the list of available printers and devices, but it is not defined by default. It gives an error when you try manually set as default: 0 x 00000709. I looked into the case of the newspapers that I see that the reason is not defined:

  The following information is part of the event: user, , printers by default {AA8B60B5-0555-45BD-9A8F-FAFA4D3DB7D8}, 0 x 80070709 the name of the printer is invalid...

  I looked at the registry of the user and NO connection string is displayed in HKCU\Printers, as I expect the error!

  If I then remove the printer from the list by right-clicking and choosing to remove the instrument and then type GPUPDATE to refresh policies, the printer is remapped and made the value by default as I expect. Once this has been done the printer seems to work for subsequent connections by the same user.

  If you don't remove this error persists.

  Anyone know what is happening because of the initial connection to fail map the printer properly?

  Thanks for any help,

  Martin Searle

  Developer of desktop platforms

  University of Kent, UK

  Hello

  The link below is better suited for your question on the preferences of the printer in a group.

  Please post your query on the printer preferences in a group by clicking on the link below:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope this helps!

• Satellite C650-17W - USB memory often appears as device not recognized

  When I connect to Toshiba C650-17W usb memory that I often get an information - unrecognized device.
  But sometimes the USB memory works OK.

  You use this USB stick on different USB ports?
  Have you noticed the same behavior on all USB ports?

• HP DJ 2540 was the fine print - now, it will not print at all.

  HP Deskjet 2540 - model #: SNPRB-1204-02 Ser #: [personal information]

  Can you help me?

  I spent three very frustrating days with my printer.  Printer worked wireless fine and usb connected until about three days ago.  I've had it for a year and it worked very well for all this time.

  Now, it does print from my laptop. My wife's cell phone can print without problem wireless in another room.

  Here's what I've done so far.  I uninstalled and reinstalled the HP software from the CD drive four different times. It installs and seems to connect properly.  Printer appears in "devices and printers".  It is not a test print.

  I installed all the updates on Windows 7 Home Premium X 64.

  I ran doctor Scan six times.

  I run scans on network for problems.

  I wipe my laptop and do a fresh install (I do each year).  But I did only 3 months.  Really don't want to do this again.

  I have nothing seems to fix.

  The printer connects to the laptop, it can be connected to a network printer. But no printing.

  It is simple ceased three days ago.  I don't remember the changes or warnings.

  I'm a little tech savvy and is not afraid to test - but I've exhausted what I can do.

  It seems to be a problem with permissions on my laptop but I can't in this case.

  I am a pastor and I use my printer almost every day.  I'm desperate for a solution!

  Joe N Tucker

  Found the answer in the forum.

  To use a different print driver for printers HP with Windows 7:
  1. click on the start menu.
  2 click devices and printers.
  3. right click on your printer.
  4. Select printer properties.
  5. click on the Advanced tab.
  6. click on new driver.
  7. click on next.
  8. Select HP in the first list.
  9. Select Deskjet 450 in the second.  If the 450 driver is not there, use the Deskjet 990c printer driver.
  10. click Next.
  11. click on finish.
  12. click on apply.
  13. click OK to close the window.

  Work on the two connected usb or wireless printing.  You don't have to change the 450 driver.  I do not know why the pilot of 2540 worked for a year and all of a sudden 3 days ago stop working-, but he did.

• My HP printer appears as "not specified" in devices and printers

  Original title: why my HP printer appears as "not specified" in printers and devices?

  Running Windows 7 64 and my computer detect my printer as "unspecified" material under devices and printers, so I'm unable to verify as my default printer.  How can I fix?  Thanks to all those who can help you.

  Sounds like you just pluged in it and has not installed software complete features of HP, which is if your unknown HP printer supports win7

• Printer does not immediately appear under device & printers on Windows Server 2012 R2 VM. Printers appears after 15-20 min or more.

  Hi team,

  I have a question where adding a network printer is successful. I can see the printer in the Device Manager and I can print as well. However, it does not immediately appear under devices and printers and takes a long time to appear. Can someone help me please as soon as possible?

  Thank you

  Anand N V

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• No printer not appearing in devices and printers in Windows 7

  This is quite disconcerting, and after a thorough search, I can't find an answer to work.

  Basically, I installed a printer on my machine here Win7Pro.  The printer can be printed from various applications.  However, the printer does NOT appear under devices and printers.  The printer appears under print management.

  The printer is an Epson color Stylus 2200 connected via USB.  The computer is a Dell D620 Laptop.  Win7 has been properly installed - no upgrade.  The printer is visible (for example) of Corel Paint Shop Pro X 2.

  Anyone has any ideas what setting I need to enable the visibility of printer under devices and printers?  Is there something other wrong here?  It's easily fixable?

  UPDATE: I just added a shared printer (connected to a WinXP machine brother 7040) networking for this laptop Win7 and it isn't too visible under devices and printers.  However, what is different here is that this printer is also not visible under the management of printing.

  Network connections are not in print management.  They should appear in printers and devices IS very disconcerting.  Normally, this will occur if the print spooler service is not running, but then your local machine would be displayed with a red indicator in printing management.

  I guess that you have a standard USB and not a parallel converter cable USB cable.

  Check the security settings for the properties of the printer.  Make sure that your user account is listed at least print access.  Devices and printers opens with the standard user security token.

  Alan Morris Windows printing team seek here Microsoft Knowledge Base: http://support.microsoft.com/search/Default.aspx?adv=1

• HP Laserjet 1010: Printer appears as a device in Windows 10

  Printer appears as a device, printer HP, non-than us to the printer. Assigned to the IEEE 1284.4 port.  How can I send output to the printer when it is Celine as a DEVICE and PRINTER not listed?

  How to install HP 1010 laserjet printer in windows 10

  Connect the HP LaserJet 1010 on USB port

  Start > settings > devices > printers & scanners
  Add a scanner or a printer > the printer I want isn't listed
  Add a local printer or network printer with manual settings
  Choose a printer port > DOT4_001 (printer HP device)
  Install the printer driver >
  Next

  Choose HP manufacturer

  Select HP LaserJet 3055 PCL5

  Next

  Use the driver that is currently installed (recommended)
  Type a name for the printer: HP LaserJet 3055 PCL5 = HP1010
  Location: On the desktop. Comment: USB Port
  To the printer, turn off the power, put under tension, print a test page.

• LaserJet P2055d: Printer that works does not appear in all programs or programs in the control panel

  I had help from HP support as my LaserJet P2055d did not work properly. The cooperative has taken over my computer (Windows 7 Ultimate 64-bit) and got, it works. However, now even if the printer will appear in devices and printers and works normally, it is not in all programs or programs and features in the Control Panel, so there is no way to uninstall it if necessary. The lady from HP had a difficult time wiuth, but that's how it was left.  It all works, but it seems not to be registered. Is it that necessary to do something at the moment?

  Thank you very much for this. My problem is that before the problem that arises with the printer, HP 2055 d has always appeared in the lists. But I guess if it's not broke don't fixit applies here. While there is a lot more to worry about than that, I will happily enter (?) on my way. Best wishes. N.

• Printers are not appearing in devices and printers in Windows 7

  I just upgraded from Vista Home Premium (x 64) for Windows 7 Home Premium.  The upgrade went quite well, but none of my printers did not work after the upgrade.  The software warned me that for my Brother HL-1240 driver could be a problem, so I wasn't surprised, but my HP Inkject 2230 Business also did not work.

  The two initially appear in devices and printers.  But I deleted and reinstalled to get the upgraded drivers.  As I did, I realized that I had given wrong directions LPT ports to two printers.  However, now, printers do not appear in devices and printers, but appear when you access via other software.  I need to remove so that I can redirect the output to the correct printer, but can not find anywhere to remove.

  Help!

  Steve

  Most likely devices are appearing as part of the computer or the parallel card in devices and printers.  Do a right click of the side card or computer, if you have a printer properties menu item is the printer you are looking for.  If you have ultimate or use Pro printmanagement.msc whenever you need to change something with local printers. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• What does "Not specified" means under mobile devices?

  When I look at mobile devices to see which devices are using most, a device appears as "unspecified". We recently published a Web version of the study. Could he be representing the version of the web?

  View Office Web will not report any information to Mobile device, you can see not "specified".

  Shikha

• Iomega Portable hard drive now does not appear under "Devices" after accidentally deleted USB cable. USB

  My Iomega eGo Portable hard drive was connected by USB on my Macbook Pro OSX 10.9.5 cable and I was transferring my iPhoto folder.  Unfortunately, the cable dropped and I got a message on my laptop hard drive had not ejected correctly.   I reconnected it the cable, but now, it does not appear under devices in the search page.  I also checked the disc utilities and it isn't here either.  I tried to connect the hard drive of my iMac, but it does not appear in the devices out there either.

  Although I have been using a Mac since they first appeared on the market and can usually work things, I find it more and more difficult with all the new technology.  Everything that used to be so easy, one of the great things the Mac since MS-DOS.

  If anyone can help I would be very grateful, because I have a lot of files on this disc of old Mac and use the Iomega to backup my most important files.

  The drive may have failed.

  Try different USB cables.

  Remove the naked drive from the iOmega enclosure and test it in a known functional wardrobe.

  Ciao.

• Drive external hard drive does not appear under "devices."

  Hello

  I just updated my OS to Sierra of MacOS. I have connected my external hard drive (HDD) and it does not appear under "Devices" in my Finder window. It worked fine before the update.

  I use a MacBook Pro (end of 2013), currently running MacOS Sierra (Version 10.12). My external HARD drive is a SeaGate Slim SL Media (500 GB).

  The external HARD disk appears in disk utility application. He also appears on the about this Mac > system report > USB. I don't know what the problem is, the external HARD disk is identified but does not appear for use in the Finder window.

  I read that it could possibly be in mode 'sleep' and putting the MacBook to sleep (while it is plugged into the external HARD drive) and it to wake up again should solve the problem. However, it did not work. No more restarting my MacBook. It was mentioned in another post that it may require extra power, so I attached power adapter and again, without success.

  I do not want to clear the contents of the external HARD drive.

  Is there a way to get my external HARD drive works as expected with my MacBook?

  Thank you much in advance.

  I also have this problem.

  My camera is Macbook Pro 13 "retina 2015 and Seagate Backup more 1 TB (NTFS - Paragon NTFS)

  * Edit *.

  

  My HDD show in report system > hardware > USB

  but it does not show in Finder or Desktop.

• Webcam does not appear in Device Manager

  I have a model of portable pavilion G62-233NR windows 7 64-bit, with a built-in webcam.  YouC'm software was bundled with it and worked.  Now the webcam is not found by one of the video programs AE Skype, Youcam... etc...

  I also noticed that the webcam does not appear in Device Manager. I tell me that I have to reinstall a driver for it but do not know what driver to install. HP has the following availble drivers for my model but which?  If one of the pilots was labeled "webcam", the task would be easy. I hope because the driver is missing in Device Manager that has installed a driver will set missing cam... I'm worried because I don't see a driver named "webcam" in the list... but what else could the problem, how can I get the driver installed, if that's the problem.

  Hello world

  I have windows 7, in the balk suggestion you type cmd

  then you have a suggestion, then you must right-click of the mouse and select administrator. otherwise, you will not be of addministrator and you can not make the order.

  Greetz

  Steve