Printer configured for wired computers and wireless

Similar Questions

• For wired network and wireless EAP process

  Hello

  I am confused with the EAP process when compared between wired and wireless. As far as I understand that EAP working if wired authentication of 802. 1 x, the client must have an IP address on this subject in advance. In other words, EAP process cannot start without the IP address on the wired client. For the same reason no doubt allow us DHCP traffic switch low impact.

  But when it comes to wireless it looks that the EAP process can function without an address IP is required on the wireless client. My understanding is correct? If Yes, how can EAP process of progress without an IP address on the client because there might be a scenario this RADIUS/ISE server can be available to the client on a network of layer 3 for authentication 802. 1 x.

  Thanks in advance for clarifying this confusion. I'd appreciate also all link to a good document that covers this concept.

  Kind regards

  Quesnel

  EAPOL traffic between switch and host is not on IP and runs before DHCP.

• My computer is constantly acquiring network address for wired connections and wireless.

  my computer is constantly acquiring network address

  my computer is constantly acquiring network address wired and wireless. Note my Dell inspiron B130, Windows xp 32-bit windows 8. also under the management of the network, the details are 0.0.0.0 IP address 0.0.0.0 assigned by dhcp and active ipv6 subnet mask. Thank you

  Hello

  1. what exactly is the problem?
  2. are you able to go online?
  3. have you made changes on the computer before this problem?

  The following articles can be useful if you are having a problem with internet connectivity.
  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• 4580 for the computers and wireless configuration

  Hello

  I just picked up my new 4580 Photosmart out of the box and think that I may have a problem.  Although I understand that the device works wirelessly OR via USB, I thought that it would support my config which is two PC wireless (laptop & netbook) AND my office that is connected via a cable to my wireless router.  I undestood what I could connect to the 4580 via the wireless router, but looking at the instructions I'm afraid that this is not possible.

  I would be grateful if someone could put me right before I waste hours trying to congure something that would never work!

  Thank you in advance.

  Ctesias

  Any PC connected to the same network as the printer can use. Simply follow the instructions to install the printer wireless, and there should be no problem.

• How to configure a multihomed in Windows 7, wired network and wireless networks at the same time?

  Hello

  I have a fixed computer Windows 7, I need to configure for the use of wire and wireless networks.

  On the phone we transfer vast amounts of data, astronomy cameras than only products of 20 to 30 seconds, space images 3-4 GB each. The cameras are connected to the top of a tower, which in turn is connected via a 45 feet cable CAT-5 to the search engine.

  Internet access requires a wireless network connection.

  These two connections work - separately. I have to disable an and activate the other to pass. This jump back and foth is obviously a bit inconvenient.

  How to configure Windows 7 to manage both types of networks at the same time? On another forum I learned this kind of configuration is called multihoming, and it's something difficult to achieve.

  Having studied more about it, there is another possible solution called Internet connection sharing. that may be easier. I haven't used this option for years (since the routers were introduced) but is still active.

  Disable DHCP on the Dovado or use a cable between the PC and the laptop.

  Turn on the wireless on the PC and make sure that you have an internet connection. Disable wireless on the laptop. Connect the PC's LAN ports and laptop (via router or a cable crossover).

  IN the network of PCs and next to the connections Sharing Center, you must have 2 Ethernet and WiFi options. Double click on WiFi, then on the next screen, click Properties.

  The second tab in the next screen is sharing, check allow other users of the network to connect and then OK.

  Define the IP addresses for PC and laptop as in my previous post, but this time on the laptop set the default gateway to the IP address of the Wired of the PC port, the 1st DNS to the address of the Huawei and value of secondary school who suggested for your ISP.

  This affects your PC to access wireless internet and allows the laptop to access the internet via the PC

  Basic information about ICS are HERE

  Manuals for the Dovado HERE

• Office jet pro 8600 more: Office jet pro 8600 not available in wired networks and wireless

  Have a 8600 JO Plus (CM750A) (N911G), he worked on the wired connection with a static IP address. Then one day she stopped communicating on the cable network. Don't reset to the default values, but still no connection, no activity lights on the connection on the printer's ethernet port. Configure to use the wireless connection. He worked for a while, and then he stopped too much work, could not see it on the wireless network. Reset to the factory settings, yet could not set the wireless connection. She see the SSID of the wireless and allow to enter the password, but would not connect to the wireless network. Now cable and wireless connectivity will not work. I think that the network adapter is broken. What is the OPINION of the Committee of the network so I can order a new one? Connected to USB at the moment and may have a printing station. So OK for now but need a new Board of Directors network. Or any other suggestions on how to connect to wired or wireless. I set factory defaults may times and set a static wired network IP address (which does not stick).

  Hey @John-G1,.

  Welcome to the Forums of HP Support!

  I understand that you are looking for a replacement of the network card for your Officejet 8600 Plus e-All-In-One Printer. It is not a replaceable part. However, if you contact HP support by clicking on this link you can discuss options based on your printer warranty.

  If you appreciate my help, please click on the thumbs up icon. If phone support is able to provide you with any resolution, click on accept solution. The two icons are located below this post.

• Want 5530: Installation of printer driver for want 5530 and Windows 10

  HP Envy 5530 worked well on Windows 8. I upgraded me automatically to Windows 10 and now the printer does not work. I tried to download the update from HP for Windows 10 and followed the program of troubleshooting provided by HP, but without success. I read comments that suggest that it is not possible to a 5530 want a PC to the network operating Windows 10. Certainly, this cannot be correct. Advice please.

  Hello @GBeastall,

  This is a great place to visit for a community support and HP! I see that the printer does not work since the upgrade of Windows 10. I wish I could help you.

  In the printers and devices window, check which shows the name of the printer and if it is set as the default printer.

  Print a configuration page to obtain the IPv4 of the printer address: print a Network Configuration Page.

  • Check the port assigned to the printer on the computer to see if it matches the IP address of the Configuration page.
  • In devices and printers, click right on the printer and on the left, click on printer properties, select the Ports tab.
  • It must be checked on the TCP/IP protocol.
  • Click on Configure Port to display the IP address.

  If the IP address does not, via the HP software, add a new device.

  1. Click on the Start button () or the lower left corner of the screen, then clickSearch.

  2. In the search box, type HP, and then click the icon for your printer. The software of the printer opens.

  3. Click utilities, and then click on the software & selection of the printer.

  4. Click on connect a new printer.

  Test the printer.

  Please try the steps outlined in this document, if you still have any questions: after 10 upgrade Windows, printer problems appear.

  Let me know the results of printing and scanning doctor.

  If the issue is resolved, your welcome to show your appreciation by clicking on "Accept as Solution" and the "Thumbs Up". Let me know how make you out. Thank you.

• Obtain printer drivers for Windows 7 and 8

  If you have a new Windows 8 PC and you want to connect it to your printer, you may need to install a print driver. You may also need to install a printer driver if you just got a new printer.

  While many drivers are integrated in the Windows operating system, you may obtain the latest printer driver for the printer works correctly with your version of Windows.

  HP makes it easy to find and install the correct driver with the printer Installation Wizard. Printer Installation Wizard works in Windows 7 and Windows 8. Printer Installation Wizard works by downloading and installing the newest and most appropriate HP software available for your HP printer. All you have to do is download the tool, run it and follow the instructions on the screen. For the tool, go here: HP printer install wizard for Windows.

  NOTES

  HP printer Installation Wizard will install a driver of long for your Windows 7 and Windows 8 active product (s). If a long driver is not available, the wizard will direct you to the site HP.com support for the alternative driver options and instructions.

  Remember that HP printer Installation Wizard does not support the version of Windows 8 RT for computers or the ARM-based tablets. Installation of additional printing software is not required on that version and HP recommends users use printing features that are already included in Windows 8 RT.

  If anyone has questions about HP printer Installation Wizard, leave a message below.

• Behind a firewall for Internet connections and wireless and inaccessible

  My netbook (XP) was attacked by viruses and therefore the firewall has blocked the internet and wireless connections. I installed the new Norton protection and this shows the machine also Ok. Here's the question - how can I activate the connections again? I realize that he is probabl; is really easy, but I just can not understand. Your help is appreciated. Thank you, Steve.

  You can try to disable the Windows Firewall:

  http://www.Webcam123.com/en/FAQ/xp_firewall.html

  If you have installed the new Norton protection, I don't think that you need more Windows Firewall.

• HP C7280 ALL IN ONE PRINTER CONFIGURED FOR A WIRELESS CONNECTION

  1. THE C7280 IS CONNECTED TO THE ROUTER WIRELESS NET (QWEST DSL HUB).

  2. IF YOU FOLLOW THE INSTALLATION INSTRUCTIONS OF THE PRINTER DRIVER ON MY COMPUTER, I GET THE MESSAGE FOLLOWING THIS POSTER:

  "DEVICE NETWORK SERVICE (HPSLPSVC) HP SUPPORT COULD NOT BE STOPPED. CHECK THAT YOU HAVE SUFFICIENT PRIVILEGES TO STOP THE SYSTEM SERVICE. »

  3. THE STATES OF LCD PRINTER THAT I AM CONNECTED TO THE NETWORK.

  4. WIRELESS NETWORK TEST REPORT HAS ALL THE CORRECT INFORMATION

  5. I CAN'T FIND THE PRINTER WHEN I GO TO NETWORK CONNECTIONS SO THAT I CAN USE FROM MY LAPTOP WIRELESS CONNECTED OR CONNECTED MY CABLE OFFICE. Help

  Hi CARRENDEN,

  try to reinstall the software again, but now, first disable all software that could prohibit the software to obtain sufficient rights on your computer. Think about firewall and downloadable. When the software is installed in the end, don't forget to activate the security software.

  Let me know if it worked.

  Arvid

• try to install xp again 1 TB hd. can't get out "the installer inspects the hardware configuration of your computers" and then restarts itself in endless loop

  BIOS recognizes and sea loads tools and again verified drive.  XP disk loads up on the other computer, but does not enter the screen "" on new install

  XP does just that.

  I hope that you have a fairly new pc. Whatever it is, start pc, press the right key to enter

  Reset the BIOS, 'Priority of Boot', defined for cdrom with cd of xp as the 1st set new hd as 2nd.

  If the hd is IDE, SATA, then additional parameters must be defined (advanced chipset)

  defined for SATA to work alone or work with IDE, (reading Guide).

  times through in BIOS, save & exit. XP CD should start auto (the hd format) when xp cd

  gives the possibility...

• DeskJet 6127 - how to print on wired and Wireless subnets

  How can I configure my network printer to print on subnets?

  I have a subnet for wired computers and the other for the wireless. I have the printer installed on the wired subnet with a static IP address. I installed the driver on all wired computers, and they can print.

  I can't install the driver on the wireless computers because the HP driver installation can never find the printer. I tried hardware address, IP address and host name of the printer, but the printer is ever found so implemented fails. However, I can ping IP and hostname of the printer on subnets.

  I tried to install the printer on a laptop computer that has a wired NETWORK adapter and a wireless card. I installed the printer when you are connected to the same subnet as the printer through wire. Then I disabled the wired NETWORK card and activated (different subnet) wireless card, but printing fails. I also tried to change some parameters of the port, but I could not print wireless.

  Is it possible to print to Deskjet 6127 on subnets? If so, how?

  I thought about it myself. I have disabled the wireless card, activated the card NETWORK wired and re-installed the printer.

  Setup automatically specifies 0.0.0.0 for the default gateway. Although the installation program automatically detects the printer and it works fine when you print the same wired subnet, you must use the advanced manual settings and change the default gateway 0.0.0.0 to the subnet that the printer is turned on.

  Now I can print from this computer laptop wireless or wired.

• Printe all-in - One HP ENVY 7640: Wired AND wireless?

  Question: If I buy the above printer, can I print using my Wired

  I bought an OiiceJet 6500 has some time ago. I was VERY disappointed. It does not Duples, I get EITHER Witred or wireless (not both). Of ink refills are EXPENSIVE and they only last for a few weeks. After a few months it stopped paper feed and no matter what we tried sound from a white elephant.

  I won't be suckered into another very poor printer with the consumables very expensive printer that only half of us can use

  Hello

  This printer supports RJ 45 cable and wireless however both can not be active at the same time.

  The best configuration that can be used there to connect the printer to the router by Ethernet cable / wireless (depending on your choice).

  Connect the iPhone, ipad in the same wireless router.

  Use of the HP all-in - One Printer Remote app to print.

  Link to the app in Itunes in HERE

  Although I am an employee of HP, I speak for myself and not for HP.

  Click on the thumb BRAVO upwards on the left to say 'thank you '.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

• LaserJet M252: Laserjet M252 wired and wireless

  I have a user who has this printer and I would like to know if this printer can be configured for a WIRED connection and wireless.

  The user has a Macbook Air, Chromebooks and iPads.   I configured the printer to have a static IP as a wired for the MBA and Chromebooks can be printed on it.  IPads need a wireless connection.

  Since I have already assigned a static IP address for a WIRED connection, configure the wireless as DHCP for iPads can print?

  You're right, plug an ethernet to the printer cable disables the wireless radio.

  Kind regards

  Shlomi

• Can I set up my printer with USB port and wireless?

  Yes, you can connect your printer wirelessly to the top and the USB. If you have 1 computer connected to the USB printer, you can also download the software and drivers for computer #2 and wireless connection.

  On the printer, you will need to put it on the network (router).

  If you need assistance, please be sure to ask. You can connect several computers to the wireless printer, but could only be plugged into the USB cable.

  Hope this helps everyone.