printer does not print using a wireless connection. coil problem
the laptop is connected to the printer with a Wi - Fi connection. The pc crashed and was removed but the knees; the top was able to print OK. After you connect a new PC, can no longer print from the laptop. Indicates the queue is not enabled on, using Windows xp.
There are several ways you can access and restart the spooler service in windows.
You can guide the computer to the service option via the control panel:
Open the control panel through the Start Menu
* Select system and security
* Select administrative tools
* Select Services
* Scroll to the print spooler and click on activate or Start
or
You can start the spooler with a command:
* Press Windows key + R to the command run
* Type net start spooler and press ENTER to start the print spooler
I hope this helps.
Tags: HP Printers
Similar Questions
-
I try to connect my Acer Vista laptop for HP Officejet 7310 printer using a wireless connection. The printer is connected to a Dell XPS running Windows 7. Is there a way to do this?
Hello
Printers use a built-in wireless card and plug it into a power source, not your network or computer. After turning on the printer, you must refer to the documentation that came with the printer to set up a wireless connection for each computer.
I suggest you to download and install drivers from the link below
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=391182
Please use the links below.
Install a printer
http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
Install a printer on a home network
http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-printer-on-a-home-network
Share a printer
-
My laptop does not work on a wireless connection that I have to use the yellow Ethernet cable to use internet.
I followed the instructions on my laptop on how to connect to broadband and I even called the company from whom get connection but they could n, t help me. I need help! I want to use my wireless laptop and how do I do it?Hi Hn_668,
See the articles below and check if it helps.
How to troubleshoot wireless network connections in Windows XP Service Pack 2
http://support.Microsoft.com/kb/870702
In Windows network connection issues
http://support.Microsoft.com/kb/313242
To set up automatic wireless network configuration
5 steps: how to set up your network wireless home
http://www.Microsoft.com/athome/organization/wirelesssetup.aspx
-
Windows XP does not display the available wireless connections
I formatted my hard drive and created two partitions. Then I installed Windows XP in one of them and Vista in the other. Then only under Vista the network card works and I see all kinds of connections available. Where, in Win XP it will not display the available wireless connections. I have tried everything to try to activate my net work card but can't find a way to do it. Maybe Win XP a clean installation driver missing. Does anyone have any ideas? I have studied all the forums and that you can't find the answer.
Thanks for all the ideas that I could research.
Thanks, missing the driver for the Dell Wireless card. He wasn't on resettlement drive.
-
Can I use my printer manually instead of using the wireless connection?
Can I use my printer manually instead of using the wireless connection?
cbg_37 wrote:
It is an OfficeJet Pro 8610.
Hello
It has a print USB 2.0 port, so you can use the printer USB cable to connect it to your computer. This cable may be not in the box, please check if you first buy one (around $5 to $ 10). It is similar to:
Kind regards.
-
After you have uninstalled McAfee, my Wifi does not work (only works LAN connection)
After you have uninstalled McAfee, my Wifi does not work (only works LAN connection). Troubleshooting message is "windows could automatically bind the ip Protocol to the ip stack.
New Aspire E11, Windows 8.1
Help, please.
Here is how I fixed it:
Go to control panel > network and Internet > network sharing Center
Click on "Change adapter settings" in the left pane.
Right click on your map. Select "Properties".
There will be a box titled "this connection uses the following items."
Uncheck anything that looks like it was installed by a third party (AVG, Avast, ZoneAlarm). In my case, the culprit was 'HTC NDIS Protocol Driver", who was installed by the software of my phone (HTC). Because it's not obvious what to uncheck, here is what I currently have checked in my system of work which should not cause a problem:
KEEP THESE CHECKED:
Client for Microsoft networks
QoS Packet Scheduler
File and Printer Sharing
IP v6
Internet Protocol v4
Driver Link-Layer Topology Discovery map IO
Link-Layer Topology Discovery recallUncheck everything else.
Go to network and sharing, disable and re-enable the adapter.
-
Windows Vista does not work with modem wireless broadband
I saw no answer to this problem. Can anyone help?
Windows Vista on my DELL laptop at home does not work with my new NETGEAR modem wireless broadband 3 G. The modem appears in the list of networks, I just errors like: unable to connect, cannot diagnose,... Both devices work perfectly well together when connected by cable but not wireless. Interestingly, my laptop work, also a DELL but runing Windows XP, works very well with the NETGEAR modem.
Summary:
Vista / Netgear wired - work
Vista / Netgear wireless - does not work
XP / Netgear wireless - workI went through the NETGEAR troubleshooting guide, doing everything from changing the types of security to manually enter the MAC address of the laptop. I ran to the ground with the NETGEAR support engineers, and they said check with Microsoft. I am convinced that it has something to do with Vista. Any ideas?
Hi jhandcc,
Please provide the complete error message you receive.
Step 1: You can follow the steps described in the article below
Error message when you try to automatically connect to a wireless access point that uses authentication of network shared in Windows Vista: "Windows cannot connect to"
" "»http://support.Microsoft.com/kb/948180
If the problem persists,
Step 2: Download and install the latest service pack for windows vista on the computer
How to obtain the latest Windows Vista service pack
http://support.Microsoft.com/kb/935791/
Reference:
You cannot connect to a wireless network on a Windows Vista-based computer
http://support.Microsoft.com/kb/935222
For more information, see the link below
Solve problems, find wireless networks
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
Let us know if this helps
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.
Disconnect all USB storage.
Run this tool by do right click and choose 'run as administrator '.
Of course, all first extract it:
http://www.Uwe-Sieber.de/files/drivecleanup.zip
If your XP is 32 bits, use the Win32 folder.
Reset.
If you still can't find the drive, assign it a drive letter in disk management.
-
my password does not work, but I could connect before
my password does not work but I could connect once before, when I tried to create a password reset disk i cant.im using the account invited now and don't have any other administrator account with the paswords working or I know.
Hello
It is available on you microsoft information help on problems with passwords
http://support.Microsoft.com/kb/940765
If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.
You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:
- Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
- Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
- Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
- Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.
________________________________________________________
except that we cannot help you
read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:
-
Original title: Sony Hanycam HC20
I just bought a HP Pavilion P2 - 1140 W7 64 bit and may not know how to download video from my Sony Handycam HC-20 who
using a Firewire connection. P2-1140 does not have a way to connect to a Firewire port and USB transfer is not supported by Windows 7.
I looked in the spec of my card mother HP and there is no additional slots to add adapters, no PCI, PCI-e or anything that looks like
as if you can add anything. I know that the Firewire to USB converters cable do NOT work, any suggestions please
There are USB firewire converters, but I think it will be a situation of hit or miss--they are unable to work or perform very well.
The only option I can think of that would work would be to use AV out on the camera and a USB capture card that records on the computer.You can also consider going back to the computer and get a different model that is built in firewire support or at least an extension connector in order to get an expansion card. -
Sound does not work when it is connected to the TV with HDMI
I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance
Hello gematz,
The sound does not work when it is connected to the TV via HDMI.
Go to start.
Type sound.
Click sound
On the playback tab, click with the right button on the HDMI interface, and then select set as default device.
If you do not see the HDMI, right click and select devices see off, then set as default.
I would like to know how everything goes.
-
I can't get my internet to open using my wireless connection, what should I check for?
I can't get my internet to open using my wireless connection, what should I check for?
Hi RosaSchiroo,
1. are you able to access internet via wired connection?
2. have you done any hardware changes or software on your computer before this problem?
3. you receive an error message or code?
You can follow this link and check if the problem persists.
In the Windows wireless network connection problems
Hope the helps of information.
Please post back and we do know. -
Windpws Mail & Wi - Fi
I just installed a TalkTalk wireless router which seems to have installed correctly. However when I try to send and receive e-mail using Windows Mail, she wants to use a made up connection. How can I use the wireless connection? Thank you very much, Dianthus MJ.
Go to tools | Accounts | Mail | Properties | Connection and check or change the connection properties. You will need to remove the account and then add it again, but try first and also check tools | Options | Connections.
Steve
-
original title: Windows Firewall
Firewall does not allow me to stay connected to AOL Webmail. When I turn off my firewall, my AOL Webmail works.
Hello
I suggest to grant exceptions for AOL mail in the Windows Firewall and check. Follow the steps mentioned in the article below.
Allow a program to communicate throughWindows Firewall
http://Windows.Microsoft.com/en-us/Windows7/allow-a-program-to-communicate-through-Windows-Firewall
I suggest to contact AOL to check the exact port and you can open the port in the windows firewall. Follow the steps mentioned in the article below.
Open a port in Windows Firewall
http://Windows.Microsoft.com/en-us/Windows7/open-a-port-in-Windows-Firewall
Contact AOL, click on the link below.
http://help.AOL.com/help/product/aol_webmail/
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
My creative application of cloud does not load then I'm connected with my Adobe all identification code suggestions? The icon in the menu remains grey...
Please check the steps mentioned in: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesn ' t - open.html
Maybe you are looking for
-
When the latest version of Firefox has been installed it gave me a message that the McAfee software was not compatible and so I have more protection against viruses. She added that when it became compatible I would be informed. I cannot afford to be
-
What is the best and why
-
My phone blackBerry smartphones is extremely slow and eat the battery
I have faced this problem for 3 days and went to my service provider today to inquire. My phone has been extremely slow, the time clock thing is for still running, and so my phone dies in 3 to 4 hours with no real use. I was told that it was because
-
Transfer Smartphones Palm blackBerry BB storm
Ok. I'm really here... I have a Palm Treo with Palm OS, I install Palm desktop on my Mac. Anyway is to access the device switch Wizard? If this storm is going to make it past the first 2 days with me I need info from my Palm. Please help VERY FRUSTR
-
My hard drive died on my old desktop I bought windows 7 ultimate, I updated to windows XP that came on the Dell to Win7 from the month last shortly after I installed it, I got a cell phone game to my brother, and now that I have a computer again, I w