Windows 7 not loading Vivilisation 2 (32 / 64 bit error - see the software manufacturer)

Similar Questions

• I need windows media player 11 for xp professional 32-bit only see the load down to 64-bit

  I need windows media player 11 for xp professional 32-bit only see the load down to 64-bit

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1d224714-e238-4E45-8668-5166114010ca#SystemRequirements

• Windows does not load on a Satellite A350 with 500 GB Seagate external HARD drive

  There is a problem with this laptop, A350-043 running Vista Edition Windows Home Premium 64 bit, part number: PSAL6C - 04S 015

  In other words: when it is connected to a 9NK2AL-510 SEAGATE 500 GB SATA DRIVE EXTERNAL USB (s/n: 5QG1YH1E) Windows will not load, it will up to and gel just before the green movement of the bar. If the USB cable is released and handed over in a second, Windows continues to load normally and all is well.

  Otherwise, the operating system will have up to 15 minutes to load. Looking in the BIOS features, there is no option to boot from USB available, so it can not be disabled. I have updated the BIOS of Toshiba to the latest version without any change in this issue.

  I tested and confirmed that the problem persists no matter what USB port is used.
  The external drive is fully functional, and there is no error or problems with it loading Windows. I reported this problem to Seagate so that Toshiba in the hope that a solution can be offered on this, but has not heard back on anything either yet.

  Do you mean that the laptop needs 15 minutes to load the Windows operating system, even if the external HARD disk is not connected?
  It sounds weird, and I doubt that this can be related to any software problem

  First of all, you should check the boot order in the BIOS the USB should be set at the last or last position.
  Second, you should check if the same problem persists even after a fresh install of the OS in some cases, that the start-up procedure could be affected due to the process software and installed background.

  But if the new installation of the operating system is not enough and if the issue persists then I guess a hardware problem (motherboard?) could be the reason for that and, therefore, a technician of the laptop must be contacted!

  That s in my opinion

• Satellite A215 S6816 won't mode BIOS and Windows does not load

  Hello

  I'm helping a friend to determine what the problem could be on his laptop satellite A215 - S6816 Windows does not load on start up and it says "press F2 for Setup, press F12 for the boot device selection menu" but niether one of these options works no matter what I do.

  I tried them on start up but nothing happens. It will be not just to enter mode BIOS or the menu. It will say please wait or entering the menue, but yet again, nothing happens.
  What else can I try to enter the menu, either to get the system to get windows to load? This could be a motherboard problem? Hard drive problem?

  Thanks in advance.

  Hello

  If you are unable to access the BIOS, or to load the Windows operating system, and then a serious hardware problem is present.
  Eventually he s a motherboard related question that means it could be a faulty motherboard or just a small part of the motherboard as a ROM chip for example.
  I doubt this can be fixed without help the ASP.

  There is thus only one real solution. go to ASP. Guys must verify the simple parts to determine what part is affected.

  Good luck

• Satellite L300 - Windows does not load

  Laptop Toshiba Satellite L300
  I bought this laptop as a Christmas gift for my son. I don't have the chance to watch it until he caught it so I n t aware that I had to do the recovery disc. Now Windows will not load or repair.

  I have performance of PCs that told me that I needed to contact Toshiba to send me recovery disks. Toshiba confirmed this but will be closed until7/1/2009 and will charge £30 for send me recovery disks.

  Can anyone help me with any solution or if I have to wait then would be what someone knows how it is easy to load the recovery discs as I'm a novice

  Thank you

  Hello!

  You can also get this disc of recovery of an ASP (authorized service provider). Here you can find one:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  Good bye

• Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

  Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

  Hello

  ·          What is the number and the model of the computer?

  ·          What is the service pack installed?

  ·          The meadow of operating system has been installed on the computer?

  ·          Do you remember any changes made on the computer before the show?

  Try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx

  You can also check: Error Message: Windows could not start because of the mistake in... : http://support.microsoft.com/kb/326671

• Acer Aspire 5610Z Windows does not load... No recovery cd

  I have an Acer Aspire 5610Z Windows does not load, when I use the F10 it comes up says:

  Modify the Windows boot option for: Microsoft Windows Vista

  Path: \windows\system32\winload.exe

  Score: 1

  Drive hard b44bb44b

  [/ noexecute = optin]

  That do I don't know...

  Thank you

  "When I start the laptop, 1 screen 2 times, beebs gives me the whats available in the computer, Press (F1) to resume, or (F2) of the installation.

  I wish that you mentioned the "beeps" in your original question.

  When you start a computer, you will receive a 'beep', which indicates that the motherboard has spent his own self (POST tests. Power on self test))

  'beeps' (plural) normally indicate a hardware problem.

  Read the Information on the links about different codes "beep":

  http://www.computerhope.com/beep.htm

  http://www.pchell.com/hardware/beepcodes.shtml

  Contact the Acer Support if under warranty.

  http://support.Acer.com/us/en/default.aspx

  If it is not under warranty, contact a repair shop, local.

  See you soon.

• SE error message: user account Service failed to connect. Windows could not load user data while trying to connect to windows

  Original title: I can't access my user account

  I went to to connect my user on my laptop and a message popped up saying the service user account Service failed to connect.

  Windows could not load user data.

  Someone please help!

  Hi tozza92,

  1. you remember to make changes to the computer before this problem?

  2. are you able to connect by using a different account?

  You can consult the following Microsoft KB article and check if it helps to solve the problem:

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  http://support.Microsoft.com/kb/947215

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After you type in username, Windows does not load. I just get a black screen, but I can pull up the Task Manager.

  Windows will not load

  Start your computer in safe mode and try to system restore to return your system files and settings to an earlier point in time, and when it was working fine. Also search for viruses and other malware

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Try scanning using this program to ensure that the malware has been removed:

  http://www.Malwarebytes.org/MBAM.php

  Run the malware removal tool from Microsoft

  To run the malware removal tool, click Start - type MRT in the search box

  You should get this tool and its updates via Windows Update

  To download the visit of mrt

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

• How to restore factory settings when Windows does not load?

  I'm recovering from the laptop (Dell Inspiron N5010) friend who has been infected with a malware ransom (ICE Cyber Crime Center Backdoor.Win32.ZAccess.erds). I used the Kapersky rescue disc to remove the virus from the ransom but now Windows will not load and I suspect that the MBR has been affected.  At startup, the Dell logo appears and the window loading appears briefly, but then you have the 'blue screen of death' flashes and the cycle repeats.   The bsod error is:

  A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO AVOID DAMAGE

  ON YOUR COMPUTER

  IF THIS THE FIRST TIME YOU ' VE SEEN THIS STOP ERROR SCREE.

  RESTART YOUR COMPUTER. IF THIS SCREEN APPEARS AGAIN, FOLLOW

  THE FOLLOWING STEPS:

  CHECK FOR VIRUSES ON YOUR COMPUTER. REMOVE ANY NEWLY INSTALLED

  HARD DRIVES OR HARD DRIVE CONTROLLERS. CHECK THE HARD DRIVE

  TO MAKE SURE THAT IT IS CORRECTLY CONFIGURED AND COMPLETED.

  RUN CHKDISK /F TO CHECK FOR HARD DRIVE CORRUPTION, AND THEN RESTART YOUR COMPUTER.

  TECHNICAL INFORMATION

  STOP: 0X0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)

  The F2 and F12 keys work, but the F8 key will not open the "Advanced Boot Options", so I can't to the "Restore Dell DataSafe and emergency Backup" or any other advanced option.  System Restore will not work either.

  I ran chkdsk and sfc hard disk (via the Kapersky Rescue disk) and neither solved the problem.  Then I copied its data on the hard drive.

  I would like to restore the laptop to factory settings (assuming that it would be better to reinstall Windows because the drivers Dell would be included already?).   There is a folder on the hard disk called "emergency" and contains a Backup*.exe file and several Backup*.dsb files.

  Is given this scenario, possible to restore to factory settings?  Or am I forced to reinstall Windows from scratch?

  What version of Windows?

  7b error message indicates the operation SATA (SATA Mode) setting got changed in the BIOS Setup or possibly the hard drive may be roasted.

  Restart, and then press F2 before Windows starts to load to open the BIOS Setup. Look for the option SATA or SATA Mode operation (models name it differently).  I don't see the BIOS screen options in the online manual, but the options for this parameter can be: RAID, AHCI or RAID Autodetect / ATA. Post back and we say exactly what options are available and how she got now.

  If you are in the BIOS Setup, also find the Boot Sequence option and make sure that the internal hard drive is ranked first on the list. If it is not first, move it to all first, save the changes and exit the installation program. See if it boots now.

  If you reinstall Windows by using a Windows Dell reinstall drive, you should not ask for the product key. It should install automatically by itself. HOWEVER, you will need to have the product keys for all the other apps that you want on this system, for example Microsoft Office, so make sure that you have the product keys and the floppies to install before you clean the hard drive.

• After back to Windows 7 from Windows 10, my Windows will not load and everything freezes in safe mode.

  Original title: backup Windows 10 for windows 7

  Hello

  can someone help me please. We have recently upgraded to Windows 10 but didn't like it. Having had the opportunity to go back to Windows 7, I did. Now Windows does not load. When I run the system repair, it works and when you scroll the dialogue it passes all the tests, but said a patch prevents starting windows.

  I tried to go into safe mode, but all crashes and I do not have a slider and it goes to a screen saver.

  I have limited computer please not too technical answers, if you want to see something then please explain to me how do.

  Best regards in anticipation.

  Valo

  Hello

  Thank you for contacting Microsoft Community

  I understand that you are facing the problem with win 10 in SafeMode as normal mode

  Please answer these questions to better understand the issue and help you:

  1. You have the disc of windows 7 installation?

  I want to suggest everything first, disconnect any external devices (Cd/DVD, USB key, webcam, memory card reader, etc.), except the mouse and keyboard and try to start.

  Now press Ctrl + Shift + ESC key combination to check if the Task Manager opens.

  If you have the Windows 7 installation disc, try to run the Startup Repair tool once more with the disc.

  If this does not help, get in safe mode with command prompt and use startup recovery tool to repair windows startup problems

  https://support.Microsoft.com/en-us/KB/927392

  Hope this helps

  Thank you

  Amplifier. Mayank Chadha

• Acer aspire 5600U, auto repair, windows could not load correctly, restore is not started

  Original title: Mr

  Acer aspire 5600U, auto repair, windows could not load correctly, restore is not started

  Hello

  Here are the instructions Acer for recovery to factory settings, new condition.

  Select Windows 8.1 it.

  "Using Acer eRecovery application to restore your system or to create a recovery media.

  http://Acer.custhelp.com/app/answers/detail/A_ID/29934/~/use-Acer-eRecovery-application-to-restore-your-system-or-create-recovery-media

  ACERS use these keys for years.

  http://Acer.custhelp.com/app/answers/detail/A_ID/35232/session/L2F2LzEvdGltZS8xNDQ0ODg5NTczL3NpZC9jRmhXNC15bQ%3D%3D

  See you soon.

• Message says: "Windows could not load correctly" then he got the error: "0xa0000001.

  So I recently got these computer errors on my laptop. The pixels on the screen start to panic and it still restarts my computer.

  The first time, he started was when I was playing a game called League of Legends and it worked perfectly fine on my laptop, and he had always run around 70 fps. I played this game for a long time. Then, in the middle of an online game the screen flipped out and restarted my PC! He sent me a message saying: "your PC has encountered a problem :(. "

  After it restarts my laptop and then after restarting the pixels on the screen start to panic again and it restarted. After that restart again once he sent me a message saying he will "fix the problem on my PC. I clicked on 'Repair' and then it restarted again. After the restart he freaked out again and then it restarted and it gave me a message saying "your PC will convert at an early stage when it doesn't have this problem. This can remove files that have been installed recently. So, I allowed it do and after 3 hours of waiting he brought me to an earlier stage if my laptop was not the problem. He only come back in a few hours. Then the next day, I decided to try again in League of Legends, it was working fine and it launched the game. I was running on my normal fps then he started trolling and it fell to 12 frames per second and the screen flipped out again and then my computer restarted. Once restarted, it it worked fine after 5 minutes it restarted again, and then he gave me a message saying: "Windows could not load correctly" then he said I got the error: "0xa0000001. I turned on my PC and my screen has panic when he started, and then it restarted again give the same message and tell you have the error: 'DRIVER_OVERRAN_STACK_BUFFER '. It came on again and it was worse still panic then it restarted and it gave me the same message saying that you have the error: "BAD_POOL_HEADER". It restarts and several times with lit the screen always freak out so I decided to just remove the plug and ask for help. I went on the computer of my brother and sought a solution for these errors. Turns out Im not the only one to these errors. They say that '0xa0000001' error is caused primarily by an AMD graphics card and my graphics card is an AMD graphics card. The solution for this error is to uninstall the graphics card and reinstall it directly from the manufacturer's website. I could have made this solution and corrected my graphics card, but there is a problem. Whenever I turn on my laptop the pixels panic and sometimes the screen turns black and then it restarts. I can't access anything whatsoever, and he keeps just restarting. Please help me and tell me how to fix my phone :( I really need a solution to this problem.

  Please answer quickly :(

  Thank you

  There is an old saying that if it ain't broke, don't fix it.

  It works again.

  Read this information

  You need to get the Driver of your laptop computer software or a hardware manufacturer, not through Windows Update (with the exception of Microsoft put updated material), as Microsoft normally does nor those have the most recent drivers available as Microsoft leverages the hardware manufacturer 3rd party to provide them.

  Go to the website for your laptop or manufacturing equipment > Driver and Software Support Section > search your laptop or material style number > then your operating system > locate the correct drivers > download and install.

  ______________________________________________________

  But this is no guarantee that this won't happen again.

  Also, it would be that the game hardware requirements are higher than supports the hardware in your laptop.

  It could also be due to lack of graphic material.

  All you can do is search for the latest drivers and play games that require only a material that has your Lapyop.

  See you soon.

• Windows will not load

  Boots BIOS and when I select "Restart Normal" lance Windows system, which stops two seconds later and then recycled in the BIOS. I tried all the option of BIOS on the screen to restart, but the process is still the same - Windows starts and stops and the system recycles in the BIOS. Over and over again.

  Hi TPerla,

  Thanks for posting. Try to do a repair on your XP machine installation. To this boot with your XP CD and follow the instructions below.

  1.	When the message Press any key to boot from the CD appears on your screen, press a key to start your computer from the Windows XP CD.
  2.	When you see the message to install Windows XP nowand then press ENTER is displayed on the Welcome to the Setup screen, press ENTER.
  3.	Do not choose the option to press R to use the Recovery Console.
  4.	In the Windows XP licensing agreement, press F8 to accept the license agreement.
  5.	Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.
  6.	Follow the instructions on the screen to complete the installation.

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Why is my cd not load & play automatically when it is inserted into the media player?

  Why is my cd not load & play automatically when it is inserted into the media player?

  If you use Windows Vista or Windows 7, try the following:

  Click Start, type: AutoPlay

  Press enter on your keyboard

  Scroll to CDs

  Click in the list box

  Select an action:

  Play audio CD using Windows Media Player.

  See:

  Windows Media Player Fact not play Audio CD- Roma automatically

  Also:

  Media Player 12 auto-play when inserting audio CD ... behavior