Printer for card 300 GSM with the option "custom size print.

Similar Questions

• 10.1.2 iMovie crashes while editing. Failed attempts to re - open. Open with the option key down key allows you to delete the preferences but contains a relative error incompatible graphics card will then appear.  With the help of El Capitan

  iMovie 10.1.2 falls down during editing of a film, usually by doing something like adding a title or a transition.  Failed attempts to restart.  Try to reboot with the option key + command allow you to remove preferences.  Then either receive an error indicating that the graphics card is incompatible or the application block requiring a force quite.  Restart or stop the iMac translates the suspended system requiring a manual stop holding down the Start button.  Restart in Safe Mode and then the normal startup will allow iMovie to load.  But after a few minutes of work with the program, it crashes and scenario again.  I use El Capitan 10.5.11 on an iMac of 2013.  I deleted the iMovie app and reloaded it, no change.  Someone has an idea for a fix?

  What are the specifications of your clips you want to change? Try to create a new user and see if FCPX is behaving.

• Unexpected behavior with the Option "record in the result.

  Hello

  I have unexpected behavior with the Option "record in the result.

  I have a few steps in the subsequence 'X', this subsequence passes a Boolean parameter. According to the value of the parameter I change the "Recorgind results" Option to report it or not. The thing is that if 'result Recorgind' set at race time I modofy by changing the value of Step.ResultRecordingOption to "Enable" and "Disable", the step is not reported until the same sous-suite 'X' is called for the second time (without changing the parameter passed).

  For example: (Preconditon: result Recorgind Option of all value sous-suite x are defined as Disable)

  1 CallSubsequenceX(Parameter: Enable)

  2 CallSubsequenceX(Parameter: Enable)

  3 CallSubsequenceX(Parameter: Disable)

  4 CallSubsequenceX(Parameter: Disable)

  Expected result:

  1. measures have been reported.

  2. measures have been reported.

  3. measures have not been reported.

  4. measures have not been reported.

  Result:

  1. measures would not same value Step.ResultRecordingOption has been changed to 'enable '. (Not Ok)

  2. measures have been reported. (Ok)

  3. measures reported same value Step.ResultRecordingOption has been changed to 'disable '. (Not Ok)

  4. measures have not been reported. (Ok)

  I use TestStand 2013 (5.1.0.226)

  Thanks in advance.

  -Josymar.

  Hi josymar_guzman,

  I just review the sequence and indeed we´re experience unexpected behavior with the Step.ResultRecordingOption callback. By a reason when you run the callback in the expression before each step section, the statement runs only until the next sequence is called, which is not what we want.

  To avoid this, you can place a statement before each step of the sequence, so you can change the State of the Option "record result" for the sequence running (and it is only the following). You can try something like this

  

  where the expression of the statement will be the recall "RunState.NextStep.ResultRecordingOption is YourCondition". With this, we guarantee that the results of the next step will be saved or not. I also remove the expression in the expression prior to each step section, because the condition is now on the statement before each step.

  I tried and it works fine. I´ll set the sequence that you share with me, with the changes. I hope this will help you and solve your problem.

• KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

  Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

  3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

  5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How I don't know what to uninstall if I'm not familiar with the options?

  Original title: drive full D

  How I don't know what to uninstall if I'm not familiar with the options?

  Hello

  Click Start > computer > is to see it as the size of the D: drive (how much GB)

  It is under 15-20GBs, that is the recovery partition

  The D: partition is normally the recovery partition and should not be touched by you, except to make the recovery disks from.

  For any problems with it, contact the manufacturer of your computer.

  See you soon.

• Updates to Lenovo appshop only with the option «install non-market apps»

  When passing a request for update for the Lenovo appshop and start the update, I get the message, that appshop SW cannot be updaten with the option "install non-market apps" set. Is this a normal behavior?

  A recent OTA update allows you to install applications of Lenovo App Shop without scoring the "Unknown Sources" option in the Applications tab (in the settings menu).

  As a solution, I would say you allowing the installation of applications not merchants temporarily (by checking the settings-> Applications-> unknown Sources). However, my advice would be to install the missing updates. Each update has many improvements and worths install.

• Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  The error you mentioned does not match the description of the usual Windows blue screen errors. When I put this error for a web-search, it has proved to be a common problem with some HP computers. I was able to get my hands on the following link for a thread in HP communities that contains information about this error. Have a read of the content in this link and see if this applies to your situation:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/HP-6730b-quot-BIOS-application-error-501-quot/TD-p/1075640

  Windows errors blue screen looks something like this. If you receive these errors, let us know about it as well as the complete info you see on the screen. And the error you mentioned in your initial post, I guess that the HP support forums would be a better place to discuss. Here is the link to the HP support forums:

  http://h30434.www3.HP.com/

• I installed the 12 elements, it does not open, a screen will appear with the options e-12 and 4 other languages

  I installed the 12 elements, it does not open, a screen will appear with the options e-12 and 4 other languages.  When I click on 12 items, a screen will appear with a red install icon, I click and it askes for the serial number. It won't let me type in letters digits only. Already, I have the serial number once. How to make this work? I don't want to be a programmer!

  attach a screenshot of what appears after clicking PES 12, http://forums.adobe.com/thread/963429

• Urgent! Master - detailed with the option/Hide search

  Hello
  
  I developed a page OFA master / detail with the option/Hide.
  
  in my search option, I have main and detail columns.
  
  
  How can I control query vo level of detail.
  
  
  For example. If I pass point not in the search option as well as customer, I could get only this line item for this CUST.
  
  
  I created the main query parameters and I'm passing param values in a methos to AM.
  
  When I click on show details his exception throw.
  
  
  Can someone help me please how to do this. Its urgent...
  
  
  
  Thank you

  Hello

  Error is due to the original Version of details may not get the value of the bind variable when judicially.

  Check your steps with this link http://apps2fusion.com/at/51-ps/333-oa-framework-master-detail-region-mandatory-steps.

  If still you face the same thing then let us know.

  Kind regards
  GYAN

• Problems with the option in the corners

  I seem to have a problem in Indesign CS5 with the options in the corners. The feature does not work all the time with the "rounded corners" drop and when, so only a slight turn happens to more independently values of that type I. I also tried the manual option, and everything worked on larger forms, even in this case it is not to cut corners beyond a certain point, which means that I can't round the ends of a box entirely. Is there a limit to the round corner tool that was introduced for some unknown reason, or is there a secret method?

  You use the script? It is in the sample scripts that are installed by default. This isn't the same thing as an object > rounding Options...

• I see two windows 'readers' when I boot with the Option key

  I had to reinstall Windows 10 (with BootCamp).  Now, I see two windows 'readers', when I boot with the Option key button.

  How can I remove a?

  Start two of them in the same installation of Windows?

• I have HP DV6-1256tx, I want driver for my laptop compatible with the next operating system Windows 8...

  Hello. I have HP DV6-1256tx, I want drivers for my laptop compatible with the next Windows 8 operating system. How to download, can somebody help me please...

  Give me the link or something where I can download the drivers...
  
  Thank you

  Edriss Dave

  HP does not currently have drivers for Windows 8. You probably won't need them. Windows 8 is not coming. It's here!

  Just do the installation on a spare hard drive and bring the original HARD drive to a safe place.

  . Windows 8 has drivers built in for most laptops and desktop computers. I did have to look for a driver in two facilities. One was an HP mini and the other was a Toshiba laptop.

• Are you aware of a possible bug in the version 3.6.23? In the browser, for example, "two /" appears with the slash through the 'o'. Is this a known bug? Thank you

  Are you aware of a possible bug in the version 3.6.23? In the browser, for example, "two /" appears with the slash through the 'o'. Is this a known bug?

  When the same text is seen in another browser, it is displayed correctly as "two."

  The same question is displayed on another computer.

  Thank you.

  Sounds that you use a font that supports ligatures (Palatino?).

  • http://en.Wikipedia.org/wiki/Ligature_%28typography%29

• Constantly receipt dialog box message "Windows - No disk" Exception Processing Message c0000013 parameters 75b6f7c 75b6bf7c 75b6bf7c; with the options to CANCEL, TRY AGAIN, or CONTINUOUS.

  Constantly receipt dialog box message "Windows - No disk" Exception Processing Message c0000013 parameters 75b6f7c 75b6bf7c 75b6bf7c; with the options to CANCEL, TRY AGAIN, or CONTINUOUS. By selecting CANCEL or CONTINIUE four times to close the box, but in a short time box reappears.

  I refer you here:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/win-XP-Pro-Windows-nodisk-error-just-agravating/5e0de54b-D921-4897-BEBC-c882e19a76c0?page=1&TM=1307282043410

  You can expect ad try some things.

  You can actually ask why forums MS Answers just can not help with XP problems?

• Dynamic action for validation of date with the notification message plugin

  Hi all

  Someone help me please with dynamic action for validation of date with the message notification plugin. I have a form with two elements of the date picker control and message notification plugin.

  The requirement first user selects the exam is finished and then selects the date. So, if the date is greater than the date of the examination is over + 2 years then doesn't trigger the message notification plugin. I tried to create that dynamic action on the date picker date that triggers the scheduled issue notification message but I want to make conditional, I mean displays the message only if date of the selected is greater than the date of the exam is finished more than 2 years.

  In terms simple, notification is displayed only if provided is superior to (date of the exam is completed + 2 years).

  I use oracle apex 4.0 version and oracle 10g r2 database. I tried to reproduce the same requirement in my personal workspace. Here are the details. Please take a look.

  Workspace: raghu_workspace

  username: orton607

  password: orton607

  APP # 72193

  PG # 1

  Any help is appreciated.

  Thanks in advance.

  Orton.

  You can get the value of the date of entry:

  $(ele) .datePicker ('getDate');

  So what to add functions such as:

  function validateNotification (d1, d2) {}

  Date1 var = $(d1) .datepicker ('getDate');

  date2 var = $(d2) .datepicker ('getDate');

  if(date1 && date2) {}

  return ((date2.getTime()-date1.getTime())/(1000*24*60*60))>(365*2);

  } else {}

  Returns false;

  }

  }

  The logic based on setting (I have two years from years of 365 days preceding)

  Then in the D.A. specify a JavaScript expression as:

  validateNotification ('P2_REVIEW_COMPLETED', this.triggeringElement.id)

  Refer to page 2 for example.