Printer HP 4630 unsuccessful installation

My printer 4630 worked very well. Arrested without any reason, no message. Uninstalled/reinstalled, turned firewall off the coast. Still will not work. Is connected wireless to the computer. The blue light is on printer. Test printer page but nothing else.

Hello Tunk,

Please click here for the steps that would help you to add a printer.

Note: in step 5, under Device Type, select the Standard and then click NEXT.

Skip step 6.

Step 7: select HP from the left pane and select Officejet 4630 in the right pane.

Tags: HP Printers

Similar Questions

  • Printer HP 4630: 4630 scan my document

    Hello
    I can't get my printer go 4630 scan my document in my tablet to go. When a month ago I had no problem doing this. What gives? I have a p.o. that was yesterday, but cannot do so. Help!

    Add to the note, * beep * spelling correction auto changed my password hp to go. It is therefore a Tablet hp and hp 4630 printer. Go not a tablet or a printer go. Sorry.

  • Download the hp printing software 4630 on my ipad

    I need help to down load the printer software hp 4630 to my ipad.

    How to download on my ipad 4630 printing software? For 5 days, I was ask for help in this challenge. Help!

  • Need to print in Spanish, English installation software

    I'm not sure where the problem lies really, but I just bought a HP G60-549DX with Windows 7 64 bit laptop and an HP Photosmart C4795 printer/scanner. Whenever I try to install the printer using the CD or the software downloaded from the internet, it downloads all in Spanish and I need English. At one point, he asked me what language and I took English. I checked the Windows language settings and they are marked correctly, than English. I uninstalled and reinstalled numorous times. When the installation starts, the screen will show in English, but then after about 5 or 6 screens everything changes. All the software menus appear in Spanish so I don't know what to click on if I want to scan, etc.

    Message edited by hpnicjon on 11/19/2009 08:00

    Please try to download and install the driver from the following link:

    FTP://ftp.HP.com/pub/softlib/software10/COL28119/MP-71555-2/PS_AIO_06_C4700_USW_Full_Win_enu_130_163.exe

  • I can't get anything to print even after the installation of the new CD of the printer and it says ready but does not print. Printer EPSON Stylus NX400 computer desk is Dell.

    Cannot get from my Dell printer.  I hooked but searching the Web for the installation of the printer comes with nothing.

    Hi Velma Brown,

    I see that you can not print. I'll help you with this problem.

    1. What is the model number of the computer?

    2. what security software is installed on the computer?

    3. have you made changes on the computer recently?

    4. What is the exact error you get when you try to print?

    You can download the drivers for the printer Epson here: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=106004&infoType=Downloads&platform=OSF_W_XP-32

    I suggest you to refer to this article and check if that helps.

    Resources for the resolution of the printer in Windows XP problems: http://support.microsoft.com/kb/308028

    Refer.

    Solve printer problems: http://windows.microsoft.com/en-US/windows/printer-problems-in-windows-help#fix-printer-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab4

    I hope this helps.

  • HP Officejet 4630: install a printer HP 4630

    Here go again us how do you get the keyboard on a HP Officejet 4630 printer to switch between alpha and digital?

    The keyboard should work like cell phones of old school when SMS - click the key number enough times until the number appears on your screen. Hope that helps!

  • How to install printer hp officejet j4580 installation cd

    What is the procedure for the installation of my printer hp officejet j4580 of the installation cd.

    The disk should have an autorun file which loads the configuration file when you insert the disc. It is possible that you have disabled the AutoPlay feature. Nevertheless, with the disc in your cd rom device navigate my computer. Right-click and choose Open Autoplay or Explore. If you chose open Autoplay Setup file must be run and the installation started. If you choose to Explore a new window will open and display the files on the disk. Simply scroll to the bottom of the list of files until you find the installer. Double click on it and choose run. If, for some reason, you can't do either you can click HERE and download the driver. Save it to your desktop, and then double-click it. From there on, follow the instructions on the screen.

    In addition, as we welcome your questions and are happy to help you ask us that you not create several post dealing with the same issue. You have now four post regarding this issue. Please do not do this in the future. I can assure you that it will not give an answer any faster than a single post.

    Thank you for your cooperation.

    Edit: I got the multiple post deleted or merged. We are ready to go now. We will proceed to the task at hand.

  • Number of pages printer Officejet 4630:4630

    I would like to see how many pages my new printer has printed so far.  I printed the page of diagnosis but don't know exactly how to interpret the information.  I see the point 21 which reads PG = 149 doesn't that mean that the printer has printed 149 pages during his life?  Or is the information elsewhere?  Is there information on the number of pages since the last ink cartridge change?

    Thank you

    The printer does not keep track of the pages since the last cartridge, but for the Officejet 4630, line 21, PG = 149 line has a current account relative to the total number of printed pages.  If your printer is connected to a network you can also find the number of pages in the Web server integrated (EWS) in the printer.  The SAP is accessible by finding the address IP address of the printer, and then put this address in your browser.  This would save printing a page.

    I have a spreadsheet where I followed my Officejet 8620 monthly pages printed so I can decide if the 'Instant ink' program would work for me (and I would need what level).

  • "Unable to connect to the computer printer" message appears during installation of laserjet p1102w.

    During the installation of the wireless software for Laserjet P1102W on computer with XP Professional (pk2), the message ' printer was able to connect to the wireless network.  However, this computer is unable to connect to the printer. "I checked the printer and the computer both connected to the same network named with even WEP key, opening, credentials etc.  I have a linksys connected to the computer and the modem cable. When I connect using the USB connect wire to the computer directly, I can print.   Two software, wired and wireless, have been loaded.  My HP inkjet printer is wired to the linksys and works for multiple computers to the wireless network. Do I need to have another printer? I thought that I could still have a truly printer wireless!  I'm a novice at this.  Thanks for any help you can give.

    I called HP support.  The technology was very knowledgeable and accommodating.  HP Smart Install program (in the printer and on CD) that came in the box was an old version.  I had to reset the printer back to factory default and to download the new firmware on the HP.com website.

    The oldest had an incorrect address router (network). You can see the address of the router (IP) when you perform the self-test (hold down the button "on") under the information network.  IPv4 address must be the same as your router.  Now my printer and computer are looking at the same network.

    Works great!  Love this LaserJet.  Faster than my last HP LaserJet 4 L.

  • Printer with Windows Vista installation issues?

    I recently had the hard drive on my Compaq CQ50 replaced.  I am running Vista Home Premium.  I went to the respective websites of the manufacturers of my printers and downloaded the drivers for them.  Printers have been installed according to the "Assistant", but I'm unable to print using them.  I get the message to install the drivers for the respective printers whenever I get on the computer, but he does not see the printer drivers which I downloaded earlier.  I have installed and uninstalled printers, deleted the printer and re downloaded drivers without success.

    try restarting in safe mode (with networking) to do the installation/activation.

    Win7 start in safe mode - http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode - please let us know if works or not.

  • Photosmart Premium C310: Printer stops after the installation of Ecaptain

    After the installation of Ecaptain, I was not able to print on my C310. When I send the page for the priner it reset my printer (asif you turned it off and back on again) my scaner works very well. I do every thing wireless & it worked fine until I installed Ecaptain

    Welcome to the HP community @scottland,

    I saw your post on the printing problem you encounter when you print from your Mac running 10.11, to your printer Photosmart C310. I have a few suggestions below for you. When you are finished, please let me know the result and we can go from there if necessary.

    First try to make copies of the front of the printer, if the work of copies successfully, try these steps below.

    1. Reset the printing system
    2. Restart the Mac.
    3. Follow this guide: Printers HP - install Mac printer driver using Apple Software Update
    4. In addition, to download this driver: HP v3.0 for OS X printer drivers
    5. Try to print the edition of text and other applications.

    I hope to hear from you.

    Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  • Printer Officejet 4630 is compatible with desktop iMac osx 10.9

    The printer HP Officejet 4630 is compatible with desktop iMac OSX 10.9 (Mavericks)? Does anyone have experience hang these together? I run a Wi - Fi system.

    THX!

    Hello

    The driver for HP Officejet 4630 is compatible with:

    Compatibility:
  • HP photosmart C4640 All In One Printer - I lost my installation CD

    As I said, I lost my CD for instaltion for my printerI have tried to download the drivers and the software all-in-one, but for some reason, my printer will not connect with my computer. Can you please tell me exactly what I should download to my laptop Windows 7. Also, is there an installation CD that I can buy as the origianl CD that came with my printer so I can't continue these problems please? I would be very GRATEFUL for any help I can get. Thank you in advance.

    Sincerely

    Jamy

    You can order a CD with the driver from HP here.  There is a nominal sum, less than $10 for my position in the United States.

    The wizard of http://www.hp.com/go/tools pilot can also help solve the problem.

  • OfficeJet 7410 driver for Windows 10 can't find my printer (Ethernet) cable during installation

    I have exactly the same problem.  I can not connect via a wired or wireless connection in Windows 10.

    The printer is on the network.  The HP Home Diagnostic Utility Network and HP print and Scan doctor can find the printer, why doesn't the installer?

    I tried to install Win 8.1 software, but it's the same beam, so I had the same problem.  An older version might work, but it seems that you cannot access old drivers on the HP website.

    I wouldn't mind so much if there was a way to install a scanner driver and I could scan with another application, but I can't find a scanner driver and the "Imaging Software" component on the installation program (I think that's what it was called) does not seem to install the driver, or at least does not have the available scanner.  I can scan via the web page printer, but that gives only very few options.

    I had any other problems with the software of HP driver for this product on the day 1, almost 14 years ago.  The works still printer, it's just the software that supports this is hogwash.

    HP, FIX YOUR PRODUCT.

    Hello

    Download and install the software and check for the following difference:

    http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

    Please let me know the results,

    Shlomi

  • HP Photosmart 8750: Cannot find my printer HP Photosmart 8750 installation CD

    I accidentally uninstalled the element during. My Photosmart 8750 printer.  I am a photographer/writer and almost impossible to believe that I did... AHHHH!   My cd, I keep in a notebook FULL of tips to installation over the years and which has yet to be found.  Is it possible to download from the internet/HP site.
    ALSO, I am a novice with computers, but I'm in the season of LEARNING, LEARNING, LEARNING.  I have a HP 6877with 64-bit, uh Home premium to windows 7. Let's see the processor (whatever it is?) is AMD athlon II X 4 645.  GZ 310

    Is it enough.   TYou Nicole Ramirez

    Hello

    1. Please use the Vista driver and install the latest updates from the following link:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2100&LC=en&cc=us&DLC=en&sw_lang=&product=426109#n195

    2. nothing is enough depending on what you are willing to do on your computer. Are you happy with it now?

    Rgards.

Maybe you are looking for

  • Satellite A500-148 not listed under assistance produces

    Hello I'm looking for software updates (bios update specifically) for my Toshiba Satellite A500-128, but it is not listed under product support.How can I find for this model? Thank you.

  • When I install memory in my hp pavilion dm4-1160us why can't not start Windows?

    Current running Windows 7 Home Premium, 64 bit, Version 6.1.7601 Service Pack 1 Build 7601 HP Pavilion dm4-1160us XH124UA PN #ABA Processor Intel (r) Core i5 CPU M 450 @ 2.40 GHz, 2400 Mhz, 2 Lossnay, 4 logical processors BIOS Version/Date Hewlett-Pa

  • the z820 RAID configuration problem

    Hello I have a newly opened (running the BIOS 3.52) z820 workstation. I would get my RAID configuration Setup program, but I have problems following the steps in the maintenance and Service guide: http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c0

  • Keyboard shortcut to increase the size of the text

    On my machine W7 running LV 2010 SP1, the keyboard shortcut Ctrl += does not work. However Ctrl + - decreases the size of the text, as expected. No problem on Windows XP Home edition and LV 2010 SP1. Is this a bug in W7 known/behaviour? This key comb

  • cRIO only with switch ethernet connection and the computer

    Hello I use a cRIO-9073 connected via an ethernet switch and then to my computer and also connected to the corporate network. The cRIO connects fine (I can interact with the remote façade on the cRIO) using this method, but I can't view the remote fa