HP Officejet 4630: install a printer HP 4630

Similar Questions

• OfficeJet J6480: Installed drivers, printer offline

  I had this problem for ages with my OfficeJet J6480 since the last update of Solution Center 13.0, who since then has caused a lot of grief for printing and network scanning to questions about my mother Aspire 6530 which has Vista 32 bit on it. My machine which is a custom built Asus P5N - D with Windows XP 32 Bit on it works perfectly with the wireless printer and has no problem with scanning for features.

  I reinstalled and rubbed the drivers many times, more a reformat. When the installation takes place the printer works perfectly, then later the printer is unable to come online with my mother Vista machine wireless.

  The only question I can find is that, in the control panel under printers Vista is that the J6480 is considered as offline, and to get the printer online, I have to right-click on the printer and select "use printer online". This resolves the issue until the computer gets shutdown. I don't know what to do and it's really disturb my mother.

  Diagnostics of the network for computers are:

  Windows XP Asus P5N - D

  -----------------------------------------------------------
  Dumping Info Diallo started on 2010-01-02 11:14:08
  -----------------------------------------------------------

  CNDUMasterData: DumpStores() started *.

  m_pNetworkStore-> dump() started *.

  Data from the network of CNetworkStore

  HostName: kenstermain
  IP address: 192.168.0.199
  Type of connection: Wired
  Signal strength: 0
  Adapter: NVIDIA nForce Networking Controller - Packet Scheduler Miniport
  MAC computer: 00:1F:C6:EA: *: *.
  VPN connection: No.
  Subnet mask: 255.255.255.0
  Default gateway: 192.168.0.1
  MAC address of the router: 00:24:01:68: *: *.
  Is the connected network: Yes
  Is connected to the Internet: Yes

  m_pNetworkStore-> dump() finished *.

  m_wlanNetworkMap contains 0 wireless devices
  m_pWlanNetworkStore-> dump() finished *.

  Network node: #1
  MAC address: 00:00:01:68: *: *.
  HostName: [unknown]
  IP address: 192.168.0.1

  Network node: #2
  MAC address: 00:00:C6:EA: *: *.
  HostName: kenstermain.phub.net.cable.rogers.com
  IP address: 192.168.0.199

  Network node: #3
  MAC address: 00:00:4: B2: *: *.
  Hostname: MARJAKIRVES-PC
  IP address: 192.168.0.253

  Network node: #4
  MAC address: 00:00:64:40: *: *.
  HostName: HP3DCC58
  IP address: 192.168.0.254
  Friendly name of the unit: series HP Officejet J6400

  m_pNetworkNodeStore-> dump() finished *.

  CNDUMasterData: DumpStores() done *.

  ---------------------------------------------------------

  Windows Vista Aspire 6530

  -----------------------------------------------------------
  Dumping Info Diallo started at 02/01/2010 11:16:46
  -----------------------------------------------------------

  CNDUMasterData: DumpStores() started *.

  m_pNetworkStore-> dump() started *.

  Data from the network of CNetworkStore

  Hostname: MarjaKirves-PC
  IP address: 192.168.0.253
  Connection type: wireless
  Signal strength: 84
  Adapter: Atheros AR5B91 wireless network adapter
  Computer MAC: 00:23:4: B2: *: *.
  VPN connection: No.
  Subnet mask: 255.255.255.0
  Default gateway: 192.168.0.1
  MAC address of the router: 00:24:01:68: *: *.
  Is the connected network: Yes
  Is connected to the Internet: Yes

  m_pNetworkStore-> dump() finished *.

  m_wlanNetworkMap contains 3 wireless devices
  Wireless SSID device #1: Kirves

  #2 of device wireless SSID: Wireless2

  #3 Wireless SSID: clyde

  m_pWlanNetworkStore-> dump() finished *.

  Network node: #1
  MAC address: 00:00:01:68: *: *.
  HostName: [unknown]
  IP address: 192.168.0.1

  Network node: #2
  MAC address: 00:00:C6:EA: *: *.
  HostName: KENSTERMAIN
  IP address: 192.168.0.199

  Network node: #3
  MAC address: 00:00:4: B2: *: *.
  Host name: MarjaKirves - PC.phub .net .cable .rogers .com
  IP address: 192.168.0.253

  Network node: #4
  MAC address: 00:00:64:40: *: *.
  HostName: HP3DCC58
  IP address: 192.168.0.254
  Friendly name of the unit: series HP Officejet J6400

  m_pNetworkNodeStore-> dump() finished *.

  CNDUMasterData: DumpStores() done *.

  -----------------------------------------------------------
  Dumping Info Diallo started on 2009-12-16 21:39:13
  -----------------------------------------------------------

  CNDUMasterData: DumpStores() started *.

  m_pNetworkStore-> dump() started *.

  Data from the network of CNetworkStore

  Hostname: MarjaKirves-PC
  IP address: 192.168.0.253
  Connection type: wireless
  Signal strength: 94
  Adapter: Atheros AR5B91 wireless network adapter
  Computer MAC: 00:23:4: B2: *: *.
  VPN connection: No.
  Subnet mask: 255.255.255.0
  Default gateway: 192.168.0.1
  MAC address of the router: 00:24:01:68: *: *.
  Is the connected network: Yes
  Is connected to the Internet: Yes

  m_pNetworkStore-> dump() finished *.

  m_wlanNetworkMap contains 2 wireless devices
  Wireless SSID device #1: Kirves

  #2 of device wireless SSID: Wireless2

  m_pWlanNetworkStore-> dump() finished *.

  Network node: #1
  MAC address: 00:00:01:68: *: *.
  HostName: [unknown]
  IP address: 192.168.0.1

  Network node: #2
  MAC address: 00:00:C6:EA: *: *.
  HostName: KENSTERMAIN
  IP address: 192.168.0.199

  Network node: #3
  MAC address: 00:00:4: B2: *: *.
  Host name: MarjaKirves - PC.phub .net .cable .rogers .com
  IP address: 192.168.0.253

  Network node: #4
  MAC address: 00:00:64:40: *: *.
  HostName: HP3DCC58
  IP address: 192.168.0.254
  Friendly name of the unit: series HP Officejet J6400

  m_pNetworkNodeStore-> dump() finished *.

  CNDUMasterData: DumpStores() done *.
  -------------------------------------------------------------------

  So is there a way I can fix this.

  Thank you and best regards,

  Ken Sullivan

  My desktop computer
  MOBO: Asus P5N - D
  CPU: Intel Core 2 Duo E8400 3.0 GHz
  GPU: EVGA 9800 GTX + Superclocked + @ 800 MHz
  RAM: OCZ Reaper HPC DDR2 800 @ 800 MHZ 4-4-4-12
  Power supply: PC power and cooling Silencer 750w
  LCD: BenQ E2200HD

  Printer: OfficeJet 6480
  My laptop: Dell Inspiron 2200
  MOM's laptop: Acer Aspire 6530

  I have some general recommendations:

  (1) of the D - Link DIR-655 WIRELESS SETTINGS-> configuration of wireless network at hand:

  (a) set the Mode 802.11 Mixed 802.11n, 802.11 g and 802. 11B for optimum compatibility.  If you are positive that there is no 802. 11b devices in the area, you can use mixed 802.11n and 802.11 g.

  (b) disable Auto Channel Scan and select channel 1, 6 or 11.  To find the best channel, download our Network Diagnostic Utility (located here) on a laptop connected to your DIR-655 wirelessrun and select Show advanced tools, and then select Show networks wireless detected.  Try to choose a channel which is at least 5 channels away from your more powerful neighbour.

  c fix the width of the channel at 20 MHz and the visibility of Visible State.  This gives you better compatibility.  While 20 MHz setting to slow down your network a bit, unless you do not have nearby wireless networks, these networks interference prevents the use of two bonded channels (for 40 MHz) in the band of 2.4 GHz Wi - Fi.

  (2) on the computer, uninstall the HP Customer Participation Program (if it has been installed).

• OfficeJet 5740: Install a printer on a network of schools wireless

  Hello

  I started school this past week and I brought an Officejet 5740 to implement in my dorm, but I had trouble getting it set up. MY laptop is on the network "(University)", but I was tasked to set up the printer on a network called "Device-(University)" and would continue to operate. I have registered my printer on the network "Device-(University)" also using its MAC address, which I was told was also necessary. After all that, I'm still not able to print wireless. I tried to restart the printer, reset the network settings and remove all software printer on my computer and starting from scratch, but nothing has worked.

  If someone has encountered this problem, and if so, is anyone know a solution?

  Thank you!

  Hello

  You can also connect to the printer using the WiFi Direct connection.

  This type of connection (Wifi Direct) connects your camera/laptop Wifi directly on your printer and requires no Wifi router and is the best way that I would use as LONG as I didn't need to keep connecting to the Wifi network router for surfing.

  Also remember to reconnect to your network of WIFI router to get internet connection after printing.

  The password to connect to your Wifi Direct printer is in the display on the front panel of the printer, or you must print it with the WIFi button for 3 sec.

  I hope this helps.

• OfficeJet 4630: Install new printer - ink cartridge problem

  I'll put up a new HP Officejet 4630. I installed two cartridges of HP61 that came with the new printer. The menu of the poster printer "ink cartridge problem, the following ink cartridge needs to be replaced" followed by a black circle. How a new cartridge would be acceptable?

  Follow-up of your steps. Cartridges still a problem in the printer display.  Took printer at Staples. The store manager confirmed my status then loaded 2 new cartridges (free) the sales basket - printer worked.  Staples deals custormers good!

• OfficeJet 4630: Formerly Geniune HP cartridges installed

  Hello

  Last week, I brought color and black cartridges. Installed the two today back a few minutes, but got previously "used Geniune HP cartridges installed, this message is only for the color cartridge. Do I need to worry? What is this message about? Why do we say "already used"?

  In the ink level display all good show.

  

  Thank you

  Riou

  Hi @RameshRK,

  Thanks for joining the Forums of HP Support with your request message.

  I understand that you have a HP Officejet 4630 e-all-in-one printer you bought a cartridge of black and tri-color and when you put them in the printer, it is said that the Tricolor cartridge has been used previously. I would like to help with that.

  The message is intended to indicate reloaded or counterfeit ink cartridges, but it can also occur when a genuine HP cartridge is depleted or nearly depleted.

  The error message "used, done or false detected cartridge ' refers to rate of rewards. HP Rewards are available when you install a genuine HP cartridge. If you receive this message long after you have installed a new cartridge, you can ignore.

  Here is a document of support that can help you with the message "Already used genuine HP cartridges installed" - "used or false detected cartridge" or "False Advisory cartridge" Message is displayed.

  Please let me know if that solves the problem, or if you need assistance.

• HP Officejet 4630: Problem installing HP Officejet 4630

  Hello

  I hope someone in these forums can help me get my printer to work.  I currently have a HP Officejet 4630 who can no longer printer from my computer Windows 10, and I don't know why.  I first had the problem when I upgraded my old computer to 10 Windows, the computer sees the printer, but when it will install the drivers, it says that it cannot connect to the printer wirelessly or wired.  I can print to the printer from mobile devices (iPhone, iPad) simply not my main computer.  I have an older model HP Envy 120 that I can view and print for just fine, but it is my printer to work and I prefer not to use it for day to day general printing which is not a related work.  I think that it is a firewall problem, but to be honest, I don't know how, or what are the changes that I need to check if this is the problem.  When I look at the printer in printers and driver section, it says that the printer is not available and that no drivers are loaded to the printer.  I know that I need drivers, but continuous HP told me no printer is installed and custom install drivers for it.  Help, please

  Dan

  Hello

  Thanks for the comments.

  Are able to disable the firewall during installation?

  Here are some troubleshooting wireless;
  
  Troubleshoot wireless
  1. make sure that the printer is not connected to the network via an Ethernet cable
  Wireless does not work if the printer is connected to the network via an Ethernet cable. Unplug it
  Ethernet cable from the printer.
  1. make sure that the wireless light is on
  If the blue light on the printer control panel is not lit, wireless can be disabled. To turn on the radio, touch
  or drag to the bottom of the tab at the top of a screen to open the dashboard, and then tap (wireless), touch
  (Settings). Tap Settings wireless and then tap wireless to activate it.
  If the blue wireless light is flashing, it means that the printer is not connected to a network. Use the wireless configuration
  Wizard available from the Control Panel printer to establish a wireless connection. Touch or drag to the bottom of the tab to
  the top of a screen to open the dashboard and then tap (wireless), press (settings). Touch wireless
  Settings, tap the wireless configuration wizard, and then follow the instructions on the screen.
  1. make sure that the computer or mobile device is connected to the wireless network
  Make sure that your computer or mobile device is connected to your wireless network. If you cannot connect the
  computer on the network, contact the person who set up your network or the router manufacturer. It could be
  be a hardware problem with the router or computer.
  1. reboot the wireless network components
  Turn off the router and the printer and then turn them back on in this order: router first, and then click Printers.
  Sometimes, disabling devices and then turn their back on helping solve the problems of network communication.
  If you still can not connect, turn off the router, the printer and the computer and then turn them back on in this
  order: router first, then printer and computer
  
  Still problems? Visit the HP (www.hp.com/go/wirelessprinting) wireless printing Center. This Web site
  contains more complete information and up to date on wireless printing, as well as information to help you
  Prepare your wireless network; solve problems when connecting the printer to the wireless network. and solve
  problems of security software.
  Note: If you use a computer running Windows, you can use the tool HP Print and Scan doctor, which can help
  solve many problems, you may have with the printer. To download this tool, visit www.hp.com/go/tools.
  
  Hope that helps.

• OfficeJet 4630: 4630 can print grayscale using only the black cartridge?

  I have purchased a printer 4630 and want to use it like I did my old PSC1350 - using only the black cartridge for all printing. I can't find any setting of grey for the 4630 that will allow for this. With the 1350, the grayscale setting would prevent any color ink cartridges is used, an unnecessary expense for printing in black on white paper.

  If there is no setting on the 4630 grey scale, can I be sure that black ink is used only for printing without color?

  Hello @clif9710!
  
  Thanks for posting on the HP Forums!

  Your printer Officejet 4630 should be able to print in gray scale and the options should be in the window of the printer printing preferences.  I was able to locate a document regarding the changing settings in windows 7 print.

  If you do not get the options to print in gray scale you will need to uninstall the HP software, including the old software, restart the computer and re-install the HP Officejet 4630 software again.

  To uninstall the software HP click here: uninstall the HP software

  To download the HP software, click here: driver and software Officejet 4630

  Another good thing about the Officejet 4630 is that it allows to print mode single cartridge.  cartridges for your printer built in print heads which means that it requires no 2 print cartridges.  If you never use the Tricolor cartridge or you are planning on printing in black, you can remove the Tricolor cartridge, put the cap of the cartridge down and close the lid.  The printer should now say "mode single cartridge printing.  Once the printer is closed upwards, you can send your print job and it will print using only the black cartridge one!

  Thanks again for posting on the forums of HP and post back and let me know how it goes!

• OfficeJet 4630: anyone can print reliaby with Officejet 4630 under Windows 10 (64-bit) using wireless?

  I have a couple of PCs.

  Both run Windows 10 (64-bit).

  An upgrade from 8.1 64-bit. The other is Windows 7 ultimate (64 bit).

  I bought Officejet 4630 at the end of September.

  So far I have not been able to print from a reliable PC at all.

  Sometimes maybe a page can be printed, but if I try the next page. The print queue seems to get hung.

  Worse, on a PC (Win7 64-bit upgrade), I can not connect with USB at all.

  Immediately after installing the driver, it fails to "print test page"? What gives?

  (I have not tried the USB connection with other PCs through the situation. He's far away and so connected via radio.)

  Strangely enough, it's the HP printing diagnostic seems to work perfectly. It prints the test page.

  But, after a week of Calvary and see how works the test via the web interface, I now have the feeling that

  HP diagnostics program simply sends a command that causes the printer to print a test page to itself, and not

  through the path of ordinary driver through what print ordinary application data. It can be found.

  Due to the failure of printing with a USB connection, I asked local HP support for replacement t

  hinking that unit was bad.

  However, the replacement arrived today, but the same symptom!

  Agah.

  I'm afraid that HP screwed royally here, but worse yet, it doesn't seem to be aware of the problem in the light of some

  Reviews of so-called unconscious support people!

  If someone has this printer works reliably on windows 10 64 - bit

  Please let us know what you were doing. (although the chance that someone with perfect condition watch Forum HP may be low. You are posting and I read this forum because of problems...)

  -How you installed the driver (from which source)

  -which tweaks you did.

  I tried to install the OJ4630_198 and the driver is updated to Windows.

  Windows Update seems to be a little better, but still stuck print jobs are seen after a few

  tests and unnecessary. (Initially because of this apparent initial success, I thought that the problem was limited

  so a PC, but now I think that both PC evenly suffer failure).

  So far, I tried to change the PORT to a fixed TCP/IP address port (which sometimes seems to be feasible: sometimes not.) I was not able to understand why. Maybe the difference between HP driver or Windows update)

  Sometimes after the Ministry of port, the first printing time works, but the

  next print does not work.  It remains in the queue.

  This has been driving me crazy...

  If person not steps forward with the installation of reliable work (10, 64-bit windows), I think I'm going for it back to HP, although the initial cooling period has expired from a legal point of view, I'll see if I can convince the support contact.

  I bought HP printers only over the years. They lasted well and worked like a charm, and the black ink was really nice.

  After that, I can't printers recomment the HP to my friends more.

  TIA

  [Driver in Deskjet 6980 works for printing with capricious 4630]

  Under improved Windows 10, too!

  I checked it after upgrading my PC under Windows 7 64-bit of Windows 10.

  After a few false starts, however, some programs are missing 'Dropbox' "Norton Internet Security" (?)

  sort: I downloaded the binary Moose and once I let the Installer run again, they picked up the proper

  configuration of the previous installation and started running.

  I needed to tweak 'Register windows' but when I tried to run 'regedit' something 'Extended attributes are '.

  inconsistent"and any program that requires administrative privilege would begin: maybe Dropbox and Norton Internet

  Security has failed because of this issue. Surprisingly, I could fix this by restoring the default Windows theme.

  (In my previous attempt to update, I put it to something Bing, a jazzy theme on the Japanese season, or something.

  Affected and surprising finished showing 'Extended attributes are incompatible' (or you may need to

  reset the sound theme as well. YMMV.) I raised this strange questions after the upgrade just in case

  These problems are related to the Deskjet 6980 under Windows 7 64-bit driver installation before upgrading to Windows 10.

  Somehow, however, the previous installation of the driver instance 4630 seems to have disappeared (maybe I deleted it before

  the upgrade, I don't know.) So I install driver 4630 for * SCANNING * purposes only.

  FAX can wait a while.

  Finally, some working environment for Officejet 4630 with using the Deskjet 6980 driver for printing

  is being created.

  TIA

• OfficeJet 4630 analysis, but will not be printed

  Printer model: HP Officejet 4630

  Operating system: Windows 8.1, 32-bit

  Method of connection: wireless

  Error messages: n/a

  My printer is connected via a USB port on my desktop.  It has Windows XP Service Pack 3.  It prints and scans with it very well.  Also, I can print from my phone using the Cloud Print or ePrint.

  My printer is connected to my wireless tablet.  It is used to print and scan very well.  It always scans to my tablet now.  It just prints more.

  When I go to print something, it loads in my queue, said it is printing, and then disappears.  Nothing happening with my printer.  I downloaded the HP Print and Scan doctor, and as a first step, he said that nothing was wrong.  Then I tried to print through it, and it would not print.  Then I printed internally through her, and she printed.  After it happened, he said I had to uninstall the software and reinstall it on my tablet.  I did, and the problem still persisted.

  I scanned again with the doctor, and he offered the same solution.  I tried again and nothing happened.  I did three times before coming here.

  You help me, please?

  Hi there @!

  Thank you for contacting the HP Forums!

  I see you have a problem of communication with the Tablet and the HP Officejet 4630.  Also, you said that after running the doctor print and Scan it has recommended a uninstall and reinstall the HP software.  If the scan still works, but printing is not, then it looks like something about the print driver specifically.

  I would run an uninstall once more.  This is a document about uninstalling the printer software.

  Once the uninstall is complete, I suggest a cleaning disc running on the Windows operating system.  Disk Cleanup will speed up the computer and also to remove all temporary files that may cause corruption of the print driver when you reinstalled the HP software.  Here is a link to a video of You Tube about How to do a cleaning disc - Windows 8.1.  When you use disk cleanup, its OK for all the check boxes.  It is important that you make sure that you check the box next to temporary files.

  After disk cleanup is complete and re - install the HP software.  Here is a link to the download of driver HP Officejet 4630 updated for Windows 8.1 32 bits.  E-all-in-one HP Officejet 4630 Printer series full feature software and drivers.

  Follow the link and click on DOWNLOAD.  Run it download and walk through the steps of installation.  Test printing again and see if that solved the problem.

  If please, after back and let me know how it goes!

• OfficeJet 4630: Problem printing with Officejet 4630

  I just replaced an OJ4620, who was not black printing, with a new OJ4630.  I am now having a problem with the OJ4630.

  It prints text most very well, but does not always print the Abobe reader messages.  I tried to install a printer driver for the 9800 without great success.  It seems that sometimes it will print the pages of Adobe, but most of the time will not.  I feel guest, and when I click on print, it does not appear that the message arrives at the printer.  The machine will then lock up and I'll have to reboot the system.  The thing that puzzles me is that sometimes the feeling will pass, but it doesn't seem to be a reason that I can understand why it happens.

  I never had this problem with the 4620, but he feels now.

  I have Adobe X and when I check the updates on the site, I thought there is not everything.

  Fran

  Hi @Fran47,

  Welcome to the HP Forums!

  I see that you have a problem with your HP Officejet 4630 of printing when using Adobe Reader on Windows 7. I'm happy to help you!

  A few questions for you:

  • What happens when you make multiple copies? Copy the text or mixed Documents.
  • What happens when you print from other programs, such as Notepad. (The same issue happen?)
  • How is the printer connected? USB or wireless?

  In the meantime, I suggest to try our HP print and Scan Doctorand see if that can solve the problem for you automatically.

  Hope to hear from you soon and thank you for posting!

  "Please click the Thumbs up icon below to thank me for having responded."

• OfficeJet 4630: "can't print to the printer" error ONLY on Windows 8.1

  I have PDF document ("test.pdf") thatwas created using Quick Books and a creator of PDF file called pdfFactory. Quick books and pdfFactory never gave me any problems in the past. The document is 2 full pages of text. (no color) My printer is connected wireless.

  Here's the problem:

  If I print in duplex mode and select 2 copies on Windows 8.1 I ALWAYS get this message:

  "Error printing on HP Officejet 4630 series...".

  The printer could not print test.

  When it breaks down, the second side of the second copy is not printed correctly.  A little is not printed.

  I can reproduce this using two different computers and 8.1 of Windows computer.

  My Windows laptop 8.1 and my printer behaves exactly like my neighbour Windows 8.1 office.

  We all have two series connected 4630 wireless printers. Both Windows 8.1 systems are 64-bit and are up-to-date about Windows updates and the latest drivers for the printer.

  Here's something interesting:

  If I print from any computer Windows 8.1 (1 copy front and back), it works

  If I print from any computer Windows 8.1 (2 copies/monoface, 1 it works)

  If I print from my desktop Windows 7 (2 copies front and back), it works

  If I print from my iPhone 6 (2 copies front and back), it works

  If I print from my MacBook Air (2 copies/duplex), it works.

  The problem started to happen this month, July.  There was a Windows 8.1 update on the 17 who has been installed.

  Any ideas?

  We have had success!

  1. I ran the utility to try Windows troubleshooting and "fix printer problems" and it did not help.

  2. I downloaded and followed the instructions to install the suggested fix. When I did the reboot required, he said that there was who had several other updates being installed. After the reboot, I decided to redo the update of Windows. There was another set of updates pending.  I installed and rebooted. There is expectation nstill optional updates. I installed all the people.  Finally when I did Uopdate of Windows he did expect NO updates of any kind.  I looked through the list of installed updates and did not find the hot fic among them.  On the assumption that one of these recent updates superseeded the fix, I just did the tests again.  They all work,.

  So, I don't know if the healed fix or something in many other updates.  According to the description of the correction to hot I think he had a very small chance to solve our problems.

  I intend to help my neighbor install standard updates and see if the problem goes away also.

• OfficeJet 4630 cannot print from Word 2013

  Hello!

  I bought a printer all-in-one Officejet 4630 a few months ago, and all went well until a few days ago: all of a sudden, I was unable to print Word files (2013), or Notepad files ("the parameter is incorrect" message).

  Printing of PDF files and anything from the Web works fine.

  I did not make any significant changes to my computer or a printer.

  I am running Windows 8.1 on a HP Pavilion laptop.

  I tried to uninstall and reinstall the printer several times.

  I ran printing HP and doctor Scan, and it tells me to reinstall the device software, what I do, without result.

  I checked each forum help on the subject.

  Nothing works.

  Anyone, anywhere, has a solution to this problem?

  Hey @LadySteph12,

  Welcome to the Forums of HP Support!

  I understand that you get the error message "the parameter is incorrect" when you try to print Word and Notepad on your computer Windows 8.1 to your HP Officejet 4630 e-all-in-one printer. I would like to work with you today with the resolution of this problem. At this point, it is not a conflict of driver on your Windows computer.

  Step 1: Uninstall the drivers:

  In order to solve this problem, I will need you to have a nice clean slate to work with. So, I'll have you uninstall the drivers for your printer. To do this properly please follow the steps below.

  1. Open the Start on the computer screen by clicking the Windows button on the lower left corner of your screen or by selecting the Windows key on your keyboard to the right of the Ctrl key.
  2. Once your start screen is open, simply type programs and features
  3. Click on programs and features to open it
  4. Once the list of programs fills in the program programs and features, scroll down until you see 4630 Officejet full series or the base driver package and Uninstall it.
  5. Once your bundle of software and the printer driver is deleted, go to the next step.

  Step 2: Delete the Temp folder:

  1. Open your Start screen again by clicking the Windows button on the lower left corner of your screen or by selecting the Windows key on your keyboard to the right of the Ctrl key.
  2. Under your start screen, type run. Click Run to open it.
  3. In the run box, type %temp% , and then click OK
  4. In the Temp folder, select Ctrl + A at the same time on your keyboard to select everything in the folder. Select "delete" on your keyboard. No files and folders on your computer will be deleted. This only deletes temporary files. If a file is always be used by a program on your keyboard will rise pop to 'jump' the item.
  5. Once your temporary files are deleted, close the Temp folder.
  6. On your desktop, right-click on the recycling bin and left, click "empty recycle bin"

  Step 3: Reinstall the drivers:

  1. Please select the following link to download the appropriate drivers for your printer again: e-all-in-one HP Officejet 4630 Printer series full feature software and drivers
  2. Once downloaded, let the installation program to run
  3. Follow the instructions on the screen to reinstall your printer.

  If you need help with the reinstall, please see:

  Setting up the printer on a wireless network for the HP Officejet 4630

  Install the software of HP Print to a USB connection in Windows 8

  After reinstalling your printer, try printing from Word or Notepad. If the error "the parameter is incorrect" pop up once again, proceed to the next step.

  Step 4: Adding a driver replacing:

  1. Open the Start screen (by selecting the windows start button in the lower left corner or by selecting the "Windows" button at the bottom left of your keyboard to the left of the 'Ctrl' key
  2. In the start screen, type "devices and printers".
  3. If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
  4. In the devices and printers folder right click on your Officejet 4630 and left click on printer properties
  5. Left click on the Advanced tab
  6. Left-click on new driver
  7. When the new window driver opens just hit 'next' until you see a list of manufacturers on the left and a list of Printers on the right.
  8. Select HP as the manufacturer on the left
  9. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  10. After selecting Deskjet 9800 hit next complete the new driver Wizard
  11. Under the printer properties window, select 'Apply' but do not hit OK
  12. Select the general tab
  13. Rename your printer in HP Officejet 4630
  14. Click OK
  15. Finally, right click on your Officejet one 4630 more time and click on Printing Preferences
  16. Left click on the paper/quality tab
  17. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its normal fast
  18. Press apply and OK
  19. Then try to print from Notepad or Word.

  Please let me know if the steps I have provided to resolve your problem. Good luck!

• E-all-in-one printer, HP Officejet 4630: history of instant ink HP

  When I go to my account and trying to figure out how many pages I printed since the first installation of my printer HP Officejet 4630 e-all-in-one, it does not give me this information.  Is it because I have not installed the new instant HP replacement ink cartridges that were sent to me after that I signed up for the program?  I always use the cartridges supplied with the printer.  If I put the replacement cartridges, it will start following my impression?

  @marlmr

  Welcome to the Community Forum of HP.

  The answer is, "I think, Yes."  The smile.

  I do not use the service, although I recently ask you a few questions about it when I had the chance.

  I remember well:

  Instant ink cartridges are not magic; they are different from ordinary ink cartridges, and there is a way by which the service is able to keep track of the use of ink.

  To get credit, I think that you need move to your new cartridges.

  =============================================================================

  See the FAQ below, including information on the "bearing".

  Information - FAQ:

  Connected HP - Instant ink

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• HP officejet: Hp officejet 4630 does not print

  I try to print a document from my computer and all I'm getting are dashes or white sheets. I've only used the pronter 4 times because I got it and 2 out of 4 times are to print or copy. There is ink in both cartridges so I don't know why, it's just Govind me white pages. I tried to clean the cartridges and to align it to see if it works, but the alignment page was not printed correctly. His lack of the printer image and most of the lines on who should be present. I know because I still had the first copy, when I did the alignment. I had this for less than a year and hardly used lrinter so I don't know why this isn't the impression that it should.

  Hello!
  Welcome to the HP community @Alewis324,

  I read your post on print quality issues you are facing with your Officejet 4630 and I wanted to answer with my suggestions for troubleshooting.

  Check out the links below and try the troubleshooting steps. If the quality does not improve, contact HP to discuss alternatives to the printer.

  1. Fixing poor print quality
  2. Printer prints a blank Page or doesn't print black or color ink

  If you have trouble, let me know and I'll do my best to help.

  Click on the thumb to below testify my help!
  Click on the 'accept as Solution' if I'm you guide to a solution!

  Best wishes

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.

  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

• HP Officejet 4630: Printing on both sides, no option to turn off when you print a Word Doc; When printing Pages

  Recently, when printing, the printer appear uses both sides of the paper, even when we don't want him. There is no option to turn it off when you print a Word document.

  
  When printing Pages it shows a checked box that says BOTH SIDES, if I uncheck, then it works.

  

  But from Word, there is no other choice. I tried the file/Preferences, I tried through the printer settings and nothing we can find will solve this problem? This has recently (last week or two) become a problem...

  Thank you!

  Hello @LaylaWi,

  Welcome to the Forums of HP Support!

  I would like to help you to solve the problem of double-sided printing that you experience when you try to print single-sided computer Mac OS X 10.9 to your HP Officejet 4630 e-all-in-one printer today. Please follow the steps below to disable duplex printing.

  1. Open a Word document
  2. Select file , and then click print
  3. Click on the drop down menu to the Copies and Pages and modify this provision
  4. Uncheck duplex .
  5. To change the additional print settings click on view details.

  -Source

  Ultimately, judging by the useful screenshots that you included in your post, you are in the right place to disable two-sided. You just need to click on the Copies & Pages for the appropriate options.

  Please reply to this message with the result of your troubleshooting. Good luck!