Similar Questions

• Mac Book printer spool queue full - how do I clear?

  Regularly my B210e printer does not print.  I select my printer in system preferences - ready to print.

  When I type comand print screens of the printer says printing and then stops (sometimes the screen indicates the full spool area)

  get on slow printer then suppresses printing of the message and puts the printer idle.

  Called HP representatives paid for the advice has spent 7 hours run disk first aid - check & repair permissions Mac utility

  Verfied OK disc worked briefly

  Unplugged printer many times to clear.  In the past which would help - now, nothing works

  Hi nwsnobird,

  

  It's wonderful to hear!  I am very pleased that you are in service again.

  If you agree, you please mark the post with the "accepted Solution" so that others can find it?  Please and thank you.

• J6480 printer indicates "PENDING" when printing requested through MS Office 2003. How to change loan?

  Too many to remind all incurred problems.  Full update drivers, etc., followed twice more effects off site local tech who identified bad cable but now PC print unless print MS Office 2003 documents and prints also MS Works on another laptop! View this print screen, status of the printer appears IDLE, when you select find printer on the same print screen, "Active Directory Domain Service is unavailable.

  To the first printer diagnostics were incomplete Clean, calibrate and Test failed, but then ran OK on the next attempt!  Then a queue has been fixed, PC Doctor recognizes Smart "short self-test" stopped; which brings us to maybe replace the hard drive, then he put correctly by pressing the 2nd time.

  Now am wondering wht is my problem... the printer or PC?

  NOTE: I couldn't find some resources addressing the status of the printer idle!

  SOLVED!  Somehow Norton 360 started blocking the MS Word 2003 document PRINT request.

  Have no idea how the change took place, but thanks to a Norton tech to help solve this problem.

• How can I connect my iMac for HP Laserjet CP2025 El captain

  Connection to HP Laserjet CP2025

  Just replaced my printer laser jet CP2025 with a replacement from eBay (given that it works!)  Previously used one daily for a few years without problem, it of the same model but keeps saying printer idle or not connected, even if it has been folded and selected on the screen.  So, I deleted all of the printers in my preferences that I had amassed 6 different printers and use only 2 BUT now cannot add any back? I use OSX El Capitan on an iMac 2013 end suggestions would be appreciated

  This article should help you to solve the problems of printer on your Mac - Apple Support

• HP envy 4502: protect the cartridges don't dry out

  Hey,.

  as stated above, I have a HP envy 4502.

  How can I protect my cartridges don't dry out? I can't find it in the manual.

  Is - it really is enough only to turn the printer off or do I have to print every week?

  Thanks in advance

  Hi Wark,

  There is no need to try to protect your cartridges don't dry out, unless you plan to leave the printer idle for more than 2-3 months.

  In the printer, the cartridges are capped so that a wet environment is maintained around the print head.  This usually prevents healthy cartridges unless the printer is left idle for a long time.  In general, printing systems are designed to resist being idle for 2-3 months, because this can happen if a printer is used in a classroom and the school closes for the summer holiday period.

  The only thing to make sure is always turn off the printer using the power button on the printer and do not feed it power off by removing the plug from the socket on the wall.  If you stop the power by taking the plug out of the wall socket that the printer may be in a State where the transport is to halfway through the box printing, and when the power is taken from the transport stops and the cartridges will not be capped within the printer.  Then they will certainly be dry if during an extended period of time.

  When you turn off the printer using the power button on the printer itself printer not stop immediately but will allow the transport of cartridges to Cap until the power goes off.

  I hope this explains the situation and is useful for you.

• Cannot connect printer to mac - status is idle

  I'm fit to be tied for no reason at all, my HP Officejet 6500 printer is connected, but it won't print anything because it says that there is no connection. utility, says the status is idle - cannot figure this out for what whatever - what happens in the world I'm missing?

  Hi @lindyd ,

  I see that you are getting a message "that there is no link. I can help you.

  Check the connections, if you are using a USB cable.

  Try a different USB cable, if you have one available.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click the Apple icon, and then click System Preferences.

  Click on printers and scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the + sign to add the driver, you may need to click the drop down menu to select the name of the printer, and then click the Add button.

  Test the printer again.

  What operating system do you use? Mac OS X: how to find which Mac OS X Version is on my computer?

  How is the printer connected? (USB, Ethernet, WiFi)

  If you need help, let me know.

  Good day!
  Thank you.

• Want to 110 e - everything - in - a D411a - printer to idle and do not print

  I want 110 e - everything - in - a D411a - currently, print all the pages of my iMac (OSX El Capitan - v 10.11.6) test, but the printer shows as inactive when I try to print documents or emails etc.

  Loading the latest version of the software and drivers, but without success.

  Any guidance appreciated.

  Hey @DT_68, welcome to the Forums of HP!

  I understand that you can't print from iMac running to your craving for 110 El Capitan. In General, idle indicates that the printer is ready and waiting for a print job. Given the efforts that you have already done, I recommend resetting your printing system, repair disk permissions and then re-adding the printer (instructions to follow). If this resolves the issue please click Accept as Solution button below; If not, let me know and I will do everything I can to help.

  Reset the printing system

  1. Click on the Apple icon and then click on System Preferences.
  2. In the hardware section, click on Printers and Fax/Scan. The Print & Fax/Scan dialog box opens.
  3. Do a right click (or Ctrl + click) in the left panel and then click on reset printing system...
  4. Click OK to confirm the reset.
  5. Type the name and the correct password.
  6. Click OK to reset the printing system. The printers and Faxes dialog box shows any selected printer

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Repair disk permissions

  • Click on your desktop so that it is written next to the Apple Finder icon, and then click OK (you will see this next to the Finder after file, edit and view).
  • Under Go, click Applications.
  • In Applications, select utilities.
  • In the Utilities folder, you will see disk utility, double-click on this icon to open the disc utilities.
  • Click on your hard drive, and then click first aid. Click OK to allow it to run.

  Once the repair is completed, restart the computer and add the printer to the back.

  When you add the printer, please ensure that you use the HP driver.

  1. Select Add another printer or Scanner
  2. Select the printer you are adding and next to the 'use' select the printer driver. As you can see from the image below, AirPrint driver will be automatically selected by default. You will need to choose your printer driver instead. Using the HP driver will help to isolate the problem, if the problem persists.

  I hope this helps.

• HP8610: Idle HP8610, does not print

  Hello

  I bought this product for Christmas last year, worked well, sometimes would not print, but then I restart and then it works. Last night, it would not print a Word document, I tried to restart and it does not work. It is wireless connected to the network, but it does not print, it tells me that it is "ready to print" and the status is IDLE.

  Thanks a lot for your help

  I reinstalled the driver and now it works fine. Thank you.

• WinXP desktop "Print screen" idle - HELP PLEASE

  What can I say?

  Hello

  Thanks for posting your question in the Microsoft Community!

  What I heard in the title of the post, it is you are facing problems with printing.

  It is is not clear on the post on the matter, you face. I would like to ask you a few questions to better understand the issue.

  1. when and where exactly you see idle "print-screen"?

  2. how you want to print?

  3. What is the brand and model of the computer?

  4. what exactly happens when you try to print?

  Come back with more information so that we can help you better.

  The content of your message contains "What can I say?" which isn't in English.

  If you want to get assistance in your preferred language, please follow the instructions below:

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  I hope that helps!

  If you need help on Windows let us know.

  We will be happy to help you!

• While idle and when printing, display screen becomes blue with 0xb900103d messages

  Printer is HP PSC 2355 (ink jet)

  Windows 7

  Moved Office HP laptop Toshshiba

  Problem: While idle and when printing, the screen turns blue with one or two 0xb900103d or 0x8823cd1e messages.  Restart the printer corrrects the problem, but he finds himself in anywhere from 2 to 12 pages.

  Thanks for your help!

  There is a document using address type codes 0 x in the PSC 2355. This document can be found here.

  If this error appears when printing and idling, then I would say that this is probably an internal hardware issue with this printer.

  I hope this helps.

• Idle print message when printing from a Mac - HP Officejet wireless 6600

  I'm having a problem with my HP Officejet 6600.  When I try to print from my Macbook Pro, I get a message from idle on the print screen.  It is to show that it is connected, but do not print.  Besides I could scan wireless to my computer from the printer and test printing in the utility window on my Mac.  This problem is confusing because it was able to print last week and now can not.  Also the printer print wireless from my PC, but not the Mac.  Help, please.

  Restart the printer.  Let me know if that suits him.

• printer is idle (mac os Lion)

  My printer does not work after update to mac os Lion. Queue displays the message 'Printer Ready' but I can't see the documents that I chose to print and sometimes even I see not the printer to my desktop. I tried to reset the printing system and add the printer again, but I have the same problem. Help, please!

  Hello

  The HP Laserjet 1100 is not compatible with Macintosh, envoirnment as you can find below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02925114

  You should update the PSC 1350 driver as shown below:

  http://support.HP.com/us-en/document/c02911238

  If the update fails for any reason, install the HP printer software 2.8 bundle in order to update the printer driver:

  http://support.Apple.com/downloads/DL907/en_US/HPPrinterDrivers2.8.dmg

  Kind regards

  Shlomi

• OfficeJet 4630: Says printer connected to the network, but computer says that it is not connected or idle

  I can't print to our hp officejet printer range 4630.  The printer says that it is connected to our home wireless network.  However, he said that it is inactive or not connected to the network on my mac.  The only way it will print sometimes is if I switch to a wireless network that is named the same as the printer.  AirPrint does not work.  We have a Linksys router.  Not sure if this is the problem or not.  I ran all kinds of diagnostic impressions on the printer and all say that it is connected.  I also tried to put the ip address into my web browser and it does not find the printer when it is connected to our home network.  Help, please!

  Thanks for trying my earlier recommendations. In my view, the problem you are experiencing may be with your wireless router. Normally, I would have you make sure that it is configured correctly, but you cannot access the built-in Web server.

  I want to try to set a static IP address, so we can try to get in the EWS. Please continue here: printer does not maintain the wireless connection

  A little luck? If you were able to set a static IP address, please try and access the built-in Web server. Follow the steps below:

  1. open EWS (use my earlier recommendations) printers

  2. go to the Network tab

  3. network protocols

  4. Select enable IPv4 ONLY

  Now with IPv4 enabled, you should be able to print wireless.

  If this isn't the case, you will need your router company to make sure that the multicast is enabled, Hello Protocol is enabled, mac filtering is disabled and ask them to check if there are updates the firmware for the router and the router's firewall check to make sure that it does not obstruct the communication

  The following ports are also used by your HP device and may need to be opened on your firewall configuration

  Incoming (UDP) ports are ports of destination on the computer while outgoing ports (TCP) are ports of destination on the HP device

  Incoming ports (UDP)

  137, 138, 161, 427

  Outbound ports (TCP)

  137, 139, 427, 9100, 9220, 9500

  The ports are used for the following functions:

  Print

  427, 137 161 UDP ports

  TCP port 9100

  Download of photo card

  137 138 427 UDP ports

  TCP 139

  Scanning

  427 UDP port

  TCP 9220, 9500

  Faxing

  427 UDP port

  TCP port 9220

  Installation of device HP

  427 UDP port

  Web Services

  80, 443, 5222 and 5223

  Any change? I appreciate your persistence!

• HP Officejet 6600: my printer has been idle since 12/12/2014

  I'm back from my vacation here a break at the marin dealer that I work and my printer is dead in the water. (Perfect for a boat dealer analogy)

  As soon as I woke up the printer to be slowed for a little over a month, I had to replace all ink cartridges (and it is always showing black as being almost empty), I printed an article but now I get a generic message that there is a problem with the printer or ink system. I have it turned off and unplugged the power cord several times without success.

  Any advice?

  Well, I got running again in uninstalling and reinstalling the black ink cartridge. I guess that I faked out.

• Problem with series Printer B110a printer - State constantly displays Idle

  Hi - I am unable to print a document from my Mac OS X 10.6.8 Version.  The printer is a HP Photosmart B110 all in one printer and has no problem in the wireless network test report.  The print job appears in the print queue, but the State remains on inactive.  I can scan successfully of the printer but cannot print any document.  Print test page printed OK but has been very slow.  I tried all the troubleshooting steps recommended by HP Support FAQ such as the abolition of the printer and reinstalling the driver.  Nothing works.  Any suggestions?

  Hello, welcome to the Forums! I hope you enjoy your experience

  I noticed your post on your Photosmart B110 model does not print. I want to offer my suggestions you that can help.

  • Repair disk permissions
  • Mac OS X: how to reset the printing system
  • Add the printer again

  This is a direct link to download the printer driver: HP Photosmart full feature software and drivers - Mac OS X v10.4, v10.5, and v10.6

  I hope that my post was information!

  Have a great day!