printer ink does not ink. Everything else is OK. Ink levels OK

Similar Questions

• File scan-to-PC/does not work, everything else done

  Windows 8.1 Pro x 64

  C310a all-in-one (fw TPI2CN1038BR (120910), (FW Patch 10))

  Linksys E2500 (fw 1.0.0.7)

  The PC is connected by wire, the printer is wireless.

  (Band 2.4, mixed patterns of connection and security)

  PC is 192.1.1.100 printer 192.1.1.103

  Security settings for the router:

  IPv4/6 SPI-Firewall-fire active

  Anonymous requests filtered

  Filtered multicast

  IDENT Port 113 filtered

  What does work is:

  Print, scan to PC

  What does work is:

  Scan from the printer to a file on the PC

  What I did:

  New installation of the operating system, does not

  DMZ was the PC, does not

  What Miss me?

  Make sure 'Discovery of the network' and 'Printer and file sharing' are turned on for your network on this computer.  You should be able to transform in the control panel.  Then, restart the computer and try again.

• HP Deskjet 2514 does not scan, everything else works

  I have an all-in-one Deskjet 2514.

  The printing and photocopying work very well.

  However, whenever I try to scan, the power button starts flashing.

  I tried to print a test page and it printed some sort of error codes page.

  I tried to unplug, wait and re - plug. This is not a surge protector, but in the wall.

  Everyone in the House that uses this all-in-one, using Windows 7.

  I have to be able to scan, so please give me solutions I can use.

  Thank you.

  Hello

  Download and run the following tool:

  http://ftp.HP.com/pub/softlib/software12/COL50849/MP-136589-1/HPPSdr.exe

  I hope this helps.

  Kind regards.

• Ink levels is not available and printer Toolbox does not

  My Hp Solution Center, he says that ink levels is not available, as the printer Toolbox does not. Had to uninstall and reinstall the hp Solution Center because he had a malware. My printer is HP Photosmart C5200 all-in-One series and OS is Windows 7 64 bit.

  Hello

  Please follow the steps mentioned in the document below.

  http://support.HP.com/us-en/document/c01868684

• me not saying the printer ink levels

  How can I get the computer to let me know the printer ink levels?

  Technical issues do not belong in the forum comments so I moved your post to the windows 'Hardware and drivers' forum.  Always include your version of Windows when you post.

  Monitoring ink levels is a function of the printer driver.  Contact the manufacturer of the printer for a solution.

• Photosmart 7520: Printer Wizard does not work on Windows 10

  My PC has recently upgraded Windows 10.  I am now having a problem with the Printer Wizard.

  Previously, I had the status display, the ink levels, scan document, check printer heads, etc.

  Now all I get is a printer configuration screen that has 3 options

  -connect a new printer,

  -convert a USB printer wireless, and

  -Add new software.

  How can I get the correct printer assistant screen to run?

  Thank you.

  Hi @AJA3,

  Thanks for joining the Forums of HP Support for a solution to your problem of HP printer Assistant.

  I understand that you use a HP Photosmart 7520 e-all-in-one printer with a computer who has recently upgraded Windows 10 and now, when you click on the printer icon to open the HP printer Assistant you get the "connect a new printer"window. " I would like to help with that.

  It is not that the HP printer Assistant does not work, but probably the printer probable network needs to be reinstalled.

  I would like to start by uninstalling all software that was installed before the upgrade to Windows 10 relating to printers. Here is a support document which can help needed - uninstalling the software of the printer (Windows).

  If you get prompted to restart the computer when uninstalling, go ahead and do the restart. If this isn't the case, restart the computer after the uninstall is complete.

  Once the computer is ready, try to use the HP printer installation wizard for installation. This tool will find the most recent version of the printer software and installation help.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Black print cartridge does not print

  Inserted a new black cartridge on the Photosmart HP 5510 printer.  Ink level display shows black to 100%.  However, when you print, black does not show up/print.  Played "print head cleaning" alignment, all the various option of maintenance under the Tools section of the printer control.  No luck.

  The sugggestions

  Thank you

  Hello @psts and welcome to the Forums of HP!

  I would like to see if I can help with your Photosmart 5510 does not print black ink. The private message will follow if the document fixes the problem

  Please, try the steps in this printer prints blank Page or document did not print black or color ink. If these steps do not resolve that question please let me know which country you are, and whether the printer is in or out of warranty, thank you!

• HP Printer Wizard does not open in HP 3050 All In One J610 series.

  HP Printer Wizard does not open in HP 3050 All In One J610 series after installing new ink cartridges.  Uninstalled and reinstalled printer software from HP website.  Printer Wizard will not always be open.  Using Windows 7.

  I understand the Printer Wizard does not work for you. I will try to completely uninstall the software and reinstall with updated drivers.

  Click here for the drivers

  Let me know how it goes.

• HP PRINT WIZARD DOES NOT

  Recently, I discovered software basic IE my printer that the Print Wizard does not open. As such, I cannot perform all printer maintenance tasks and creates a lot of problems. Someone please help

  Model of printer - HP Deskjet INK ADV 2010 K010.

  OS - Windows 7 Home basic (64-bit)

  Computer model - HP Omni all - in - one

  Download and install the drivers and full software on the HP website.  Try now.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=4157330&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=4157433

• When I cancel printing, it does not cancel. Starts printing the same document.

  When I cancel printing, it does not cancel.  Starts printing the same document, what should I do?

  Original title: * E-mail address is removed from the privacy *

  From Internet Explorer

  Once the data was transferred to the printer, it can usually be stopped.  Some printers are different and allow you to cancel, even if she has already begun to put ink on paper.  Others only allow you to cancel during the data send always on the wire.

  So, it's normal.

• I am looking for a download secure portal MyEpsom view on my Epsom printer ink levels

  I am looking for a download "MyEpsom Portal" for my Mac so that I can watch on my Epson printer ink levels. It seems that for Windows which I did not. Can anyone help?

  Lynne

  Have you checked the system preferences > printers and Scanners > print from there you see a button Options and supplies

  Like this.

  

  Have you checked the Epson website for drivers/software for Mac OS X. for your printer scanner model.

• Print processor does not exist

  I am running Vista Home Basic SP2, and all of a sudden my computer does not recognize my computer. Attempts to re - install gives the notification: "unable to install the printer. The print processor does not exist. "What could be the problem? How is this best set?

  I finished by using System Restore and restore to the previous successful configuration. It worked, but I still don't know why the printer stopped working. Everything works fine now. Initially I had uninstalled the printer and re-installed, but he would never let me complete the installation.

• Error code "Windows printer Interface does not.

  Original title: print queue stüch document display in the suppression of landmark when he is not removing or printing when it is not printing printer interface window error msg does not have already reinstalled driver 4 times turns on is quite what is wrong

  error code "Windows printer Interface does not ' happens too times I have re installed printer drive 5 times also status on a print document shows in printing when printing does not then when I try to cancel the document it shows deleting but its not sound help please frozen. Thanks richard

  In order to answer your question, you need to tell more about your hardware system configuration.

  No assumption here:

  (1) the printer must be compatible with your operating system. Follow the program and manual installation. Normally, these measures ensure impeccable installation.

  (2) re - install the printer before removing all previous printers will cause you problems.  Delete all incidents related to this printer software.

  (3) most of the software are installed everything first, without the connected printer. You will need to follow the guests. Remove the CD. The system receives a reboot, the power and the USB cable are attached, you turn it on and the computer detects the device. So actually, it installs the appropriate driver package. This is typical.

• LaserJet P3010: Cannot install the printer. The print processor does not exist

  I have a LaserJet P3010 Series PCL 6. It gives me the following error when I try and add it to our print server: "unable to install the printer. The print processor does not exist. "Regardless of what kind of IP config I use, the test page I always manually print has 0.0.0.0 for everything, even with the manual entry of IP. It is brand new, fresh out of the box, and I installed a few of them before. There seems to be 2 sets of link one of them lights flashes green (even without a CAT cable) and the other shows not all colors. (I think that's the main, judging by its location). I know that the cable is good, but also over all cable infrastructure. Should I have a defective printer? Or did I miss something...

  Problem solved. Use another port.

• Cannot install the printer. The print processor does not exist.

  Windows 7 Enterprise 64 bit.  I am able to install HP LaserJet printers but no virtual printer.  I can not load the XPS from Windows printer or Print to OneNote.  I also tried to load more than one PDF printer and none of them work.  The error I keep gettig to "cannot install the printer.  The print processor does not exist. »

  Any ideas would be appreciated.

  My laptop has been reloaded from a picture, and I was not able to start the print spooler at all. I have studied the issue and cleaned files and registry entries and was able to print on real printers, but not virtual. That's when I asked the question.

  Finished reimage the computer again, and once again, I could not start the print service. We discovered that the image that the laptop was built from was actually a VMWare virtual machine, so we started to look in that direction.   We had to delete the following entry in the registry and rebooting, how the print spooler began to work very well.

  [Print HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\ThinPrint for VMWare Port Monitor]

  You wanted to post this in case someone else ran into a similar problem.

  This is what worked for me.

  I copy the files from the print processor from another machine to work with the same architecture as the one who has the problem (x 86 or x 64).

  Step 1: Stop the print spooler service.

  Step 2: Copy all the files and folders on the system to work under C:\Windows\System32\spool\prtprocs\x64.

  Step 3: Make a backup of the system files listed in the C:\Windows\System32\spool\prtprocs\x64 problem.

  Step 4: Paste the files that you copy from the system of work in the case of the United Nations, the problem system.

  Step 5: Start the print spooler service.

  Try to connect or install your net printer and it should work now.

  I hope this work for all of you.

• queued print job does not cancel

  the print job that don't cancel out of the queue seems to be hungup in the deletion process and therefore does not allow something else to print.   PSC 1610 and windows 8

  Hello

  I suggest to uninstall the HP software and then reinstall the software from here.

  Also, are you connected with a USB cable? I would suggest trying another USB cord, that this might be the reason, you experience the problem.