printer Lexmark wont commmunicate with wireless computer

Similar Questions

• Dell v313 printer - my printer is not communicating with my computer - I need enable two-way communication in the printer properties

  My printer is not communicating with my computer. He always tells me to activate the two-way communication option in the printer properties dialog box.

  How can I do this?

  MichaelMcQuillar,

  Please check your virus protection and firewall. They seem to block communications from the printer.

  Rick

• Printer is not communicating with the computer

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have problems with my Dell v305 printer I tried everything. Error message indicates that the printer is not communicating with the computer

  Hi vanessa James Sluys Veer,.

  Probably you should install/update your printer drivers for your operating system.

  Please see the link below for the Dell Web site:

  http://support.euro.Dell.com/support/topics/topic.aspx/EMEA/shared/support/DSN/en/document?c=UK&l=en&s=Gen&DN=1093016

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Photosmart 6520: printer/scanner cannot communicate with the computer

  Attempt to analysis I get the message that the scanner cannot communicate with the computer. I found a 'solution' of Provost. followed the instructions, i.e. cleaned-uninstalled, downloaded the recommended download, but when I tried to install it I get the message: this volume does not meet the requirements for this update. So now I find myself with a softwareless and so unusable printer. Help, please. OS is Snow Leopard 10.6.8

  I messed around with it a bit nd git to work, finally. So startrekker, I give you a thumbsup kudos.

• my wireless printer c309 stopped communicating with my computer. It worked well before.

  My Gateway GT5408 computer not communicating wireless with my wireless HP Photosmart C309a printer.  I am running Windows 7 32 bit.  My router is a model of SMC Networks SMCD3GNV provided by Comcast.

  You must call 1-800-474-6836 for chat with an agent even if you are probably out of warranty.  It will not be a charge for the support of the wireless issue.

• Whenever I try to install the printer Lexmark Professional 6600 series wireless, but each time said the message of the printer installation failed.

  Tonight, I tried several times installation/connection to the wireless Lexmark Professional 6600 series printer but every time the printer message said installation failed.  Why?  What should I do to connect to this printer?

  Title: original printer Installation failed

  Hello

  Sorry for the late reply.  I find the user guide to use this device.  Check page 128 for troubleshooting wireless.

  http://www.Lexmark.com/publications/pdfs/2007/5600-6600/en.html

  What version of Windows are you using then I can move you on the appropriate forum?

• My Dell 946 Printer is not communicating with my computer. I have a Dimension 4700. My documents are lining up in the print queue, and it is not printing.

  I tried a lot of things
  -disconnect and connect my computer
  -Uninstall and installation of my computer
  -using Device Manager to reset my printer ports.
  Nothing works

  Hello Lsnnj,

  Thank you for your message.  It could be a few reasons that this is happening, try them next steps.
  1. click on 'Start' > right click 'Manage' > click the (+) sign next to "Services and Applications" > click on "Services" below
  On the right, highlight it, and then double-click "print spooler".
  Make sure that the Startup Type is set to automatic
  On the "" Connection tab and make sure that the Local System account is selected, and also that allow the service to interact with desktop is activated.
  Below, you will see the hardware profile. Make sure that this option is enabled, if it is disabled, select the profile, and then click the Activate button.
  Restart your computer and test the printer.
  If this does not resolve your problem, try to go to the website of the manufacturer of your printer and download/install the latest drivers for your printer.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I can't install a printer lexmark 7100 series to my computer

  I have an old printer, a Lexmark X 7170 I tried to install, but the habit of my computer I would like to install it.

  do I need a newer printer?

  It is a HP support site, you probably need to look at the Support of Lexmark site for more information. 7170 it appears on the site of Lexmark site here that your X is not supported in Windows 8.1.

• says printer can't communicate with the computer, but used to work

  also says: check the firewall settings to ensure dleacoms.exe is not blocked
  

  Hello

  In order to quickly provide a solution, please answer these questions:

  1. what version of Windows operating system is installed on the computer?

  2. What is the brand and model of the printer?

  3 did you do changes on the computer before the show?

  I suggest you follow the steps in the link to allow a program in the firewall.

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/allow-a-program-to-communicate-through-Windows-Firewall

  Note: By default, most programs are blocked by Windows Firewall in order to make your computer more secure. To work correctly, some programs may require you to allow them to communicate through the firewall. Before allowing a program make sure that you have got this information from a reliable source because it can affect the security of your computer.

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• I have a jet2050 printer j510 series HPdesk that it prints well but when I want to ink levels it says that my printer is not communicating with the computer?

  The computer must be connected because it prints my orders?

  Hello

  What operating system is installed on your computer?

  I suggest you to follow the steps from the link and check if it helps:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=4027463&prodTypeId=18972&ObjectID=c02061335

  You can also post your query on HP forum to get help:

  http://h30434.www3.HP.com/

• Printer will not communicate with the computer.

  Original title: printer nocomunicate

  my printer Lexmark4200series Mod.x4270 and my compurete Compaq Presario5300no communicate

  Lexmark confirms that the version of your installed printer software is supported in IE9 (yet)?

• my printer was working fine with my computer now it, s will be printed a test page butnothingwhat can I check

  the only thing is that it's just want to print

  Hello

  (1) what is the brand and model of the printer?

  (2) you get an error message? If Yes, what is the exact full error message?

  (3) is a program-specific question?

  (4) you remember changes to the computer before the show?

  I suggest you to refer to the procedure described in the following article and check the status of the issue.

  Printer in Windows problems.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Resources for the resolution of the printer in Windows XP problems.

  http://support.Microsoft.com/kb/308028

• My Lexmark interpret s405 printer has stopped communicating wirelessly with my computer

  I used the printer for about 18 months without any problem. Then all of a sudden the printer has stopped communicating with my computer. I use W7. Looks like the wireless connection failed. As I see that nothing has changed, what do I do?

  Have you tried to Turn Off router/wireless?

  I hope this helps.

• Lexmark Interpret S405 is not communicating with the computer and will not print

  My computer works with Windows 7 and updates automatically.  I got the Lexmark Interpret S405 for 18 months, and it has worked great until a couple of months.  When I try to print, I get an error message indicating that the printer is not communicating with the computer.  When I check the printer, it shows he's ready.  The print job shows that it is ready to print, but nothing happens except for this message.  When I try to erase the impression, it really takes a lot of time - usually have to unplug the printer so that it can finally clear.  Then it still will not print if I try again unless I restart the computer.  Lexmark support page says that there is a problem with Windows 7 and their product.  All the solutions for this problem yet?

  Computer model of the bridge ZX6970, OS 64-bit, intel CORE CPU I-13 3.30 GHz, Windows 7 Home Premium.  Can someone advise a fix for this problem?  Thank you!

  Hello

  Have you tried to download and install the updated firmware for the Lexmark Interpret S405 from the manufacturer's website.

  If this isn't the case, please download and install it.

  Download Firmware for your printer!

  We know the results.

• Printer processor no longer on my computer

  I have Windows XP Media Center Edition 2002 series, and the PRINT PROCESSOR does not exist so my Kodak printer will no longer work with her.  How can I get the processor of the printer on my computer?  It works perfectly until a month ago, then the printer has stopped working with my computer.  Kodak has been contacted and took control of my computer, and then could not solve the problem and reminded earlier.  With control even once, Kodak showed me that the error led to a printer on Ms missing processor.

  I have automated updates of Windows, so I don't understand how this 'left' my computer element.  Ms. wants $99 back on my computer... but there must be a simpler solution.  Any suggestions?  Thank you

  The computer has service pack 3.  The error says"cannot install the printer.  The print processor does not exist"... does this help?

  Not really.  I had this error before.

  There is a Microsoft KB Article that address this issue: http://support.microsoft.com/kb/906752 but I'm a little suspicious of the applicability of this article because (a) you probably have a printer standard consumer (which is unlikely to have a "custom print processor"), (b) If your printer requires a "custom print processor", then Kodak should have known on this subject and what is provided , and (c) your system apparently works OK without the hotfix mentioned in the article.

  Although I can't guarantee it will solve your problem, I suggest that you clean your printer drivers by following the instructions here--> http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  Before you start to follow Bruce, open Control Panel > add or remove programs and remove anything related to your printer.  Restart the computer.

  Then follow the steps of Bruce 1-5.  Restart the computer.  As Bruce wrote, these measures should be sufficient, but if you want to be great depth, download and run cleanspl.exe OR follow steps 6-14 (in step 9, do not start the spooler or you will probably not be able to delete the files in the later stages; the spooler is restarted in step 14).

  When you are finished, reinstall the printer as if you were doing so for the first time.  Do not connect the printer to your computer until you are prompted to do so by the software.  You should probably go on the Kodak website and download the latest software for your printer package; Otherwise, use the CD that comes with it.