Printer not responding do not unless in administrator mode

Similar Questions

• printer does not print not unless disabled as

  Hi all

  I got an officejet pro 8600 for about two years and had no problems until now. I recently had to change my router

  of course, the new router came with new password etc.

  I have managed to connect my laptop to the router wi - fi and followed the instructions to do the same thing with the printer. But since that I have found that if I try to print from the laptop, I get the following pop up message cannot communicate with the printer.

  If I then turn the printer off then back on again then will display.

  Separately, I have also a small icon in the lower corner of the laptop, which indicates that the computer scan is disabled if I open the scan to manage to the computer, I am unable to activate this (I have not tried the thing even with power that I didn't need to scan anything recently)

  It seems obvious to me that when I implemented the new router I did something wrong that caused this fault to occur.

  I'd be very grateful if someone would be able to maybe explain what I did wrong and how I might solve the problem.

  Also I'm not that tech savvy/when it comes to computers so less technical the best answer

  Thanks in advance

  Graham

  Deleting one of the printers might do the trick, but I can't help but wonder if the best thing to do would be to remove the driver for the printer from the server properties, and then add it again.

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8 and 8.1 - Select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Once the driver is then deleted, open start > all programs > HP folder > folder printer > HP Setup and software (or the icon of the printer).

  The installation screen and the software opens and you can click on connect a new printer.

  

• Epson 1280 printer not shared in XP Mode

  I just upgraded from Vista 32 to Win 7 64 (clean install) with only a few problems (love Win 7!)  but I'll limit this post for a particular problem:

  I have two printers installed: HP Laserjet 1020 and Epson 1280 ink jet. I have CreataCard installed in XP Mode and it works fine. In the USB tab, I left the printers in sharing mode (both present, the HP is labeled with its full name, the Epson is labeled with only "USB Printer" - perhaps an idea of the problem?)  I can print on printer HP of CreataCard but not for the Epson printer. If I first start XP Mode and exit the "USB Printer" sharing mode, then CreataCard can print on it (an extra step).

  Additional information: the Epson printer is not displayed on the page "Devices and printers" and yet it appears in the print dialog box when you print a document directly from an application Win 7.

  I have CreataCard on the Windows 7 Desktop icon and it launches CreataCard full screen just the way I want it - and - it prints right out of the HP printer without intermediate action by me. I would like the same capacity for the Epson printer.

  Question: What can I do to allow the use of the Epson printer in XP-Mode programs sharing mode?
  
  Thanks, Bob423

  PS, in system Informaton - printer, the Epson 1280 appears on the port USB002 and made the right description, ' Epson Stylus Photo 1280 (M). Printers HP LaserJet appears on the port USB001. When I try not to print with the Epson printer in share mode (labeled as "USB Printer" in the dialog USB but corrected labeled as Epson 1280 in the CreataCard printer dialog box) I get an error message "Epson Status Monitor 3: Communication error". To get rid of him, I have to start the Task Manager and stop the Epson Status Monitor application.

  Well, I found the answer! The Epson 1280 was not assigned a port TS in XP Mode even if the HP printer has been (TS001). The solution was to open the "printers and faxes" in XP Mode, click on "Add a printer", click 'Next', "Local printer attached to this computer" option but be sure clear a check mark (if any) in "automatically detect and install my Plug and Play printer", then click on 'Next', under "use the following port", select one of the ports of TS. Because on my computer port TS001 has been used by the HP printer, I selected the TS002 port, then click on 'Next', select your printer driver and install. Just for good measure, I allowed the printer to share, but I don't think it was necessary. The printer will now appear in the "Printers and faxes" page as "Ready", which he did not before. The HP printer has always appeared as "Ready". The programs I run in XP Mode can now print to the printer Epson on TS002 without having to "join" the printer from the USB tab at the top of the window of the XP Mode. I've seen other messages that you may need to try trial and error to find the ports TS used by Win 7 to share printers in XP Mode. I only had a single printer to match, but if you have several printers with the same problem, it can be tedious but you only to have for once. There is no indication in the window "Select a port" as to what Win 7 printer is assigned to what TS port, you have to guess and try to print a test page to see if you guessed correctly. Of course, if the manufacturer has successfully written the driver Win 7, you wouldn't have this problem (the Win 7 HP for the 1020 driver worked perfectly, the Epson driver was listed as Vista 64-bit, not having said anything about support for Windows 7).

  I always get a communication error of the Epson Status Monitor when sending a print job to the printer, but then begin printing and I can then simply X out the Status Monitor window without problem. I guess it takes a few seconds before the communication is established and the Status Monitor allows not enough time. So I still an extra step of X on the error window, but all still prints (even if I don't have X window) - so I'll take that as a step forward.

  Now I can now put a shortcut to the CreataCard program on my Win 7 desktop that will automatically open in XP Mode with no further action required by me (except X'ing by the Status Monitor error window when you print a job). The next task is to find how to prevent the error window Status Monitor to come.

  I guess that progress.

• System Restore does not work in windows 7? not even in administrator mode

  WINDOWS 7 IS MY OS. AM NOT ABLE TO RUN THE SYSTEM RESTORE. HE IS THERE A NO RESPONSE AFTER I SELECTED THE SYSTEM RESTORE SEVERAL TIMES.

  Sushant salvation,

  To help you better, please answer these questions.

  1 you get a specific error message?

  2. you try to restore the computer to an earlier time?

  3. you try to create a restore point?

  4 did you do changes on the computer before the show?

  I suggest you follow the provided methods to solve the problem.

  Method 1: Try to perform a system restore, safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If you are able to perform the system restore in safe mode, I suggest you perform the clean boot and check that there could be some third-party application that may be causing the problem.

  Step 2:

  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 of the link to start the computer to a Normal startup mode.

  Important: If you use system restore when the computer is in safe mode, you can't undo the restore operation. However, you can run System Restore again and choose a different restore point, if any.

  Undo system restore

  http://Windows.Microsoft.com/en-in/Windows7/undo-system-restore

  Method 2

  You can also try temporarily disabling computer security software and check if it makes a difference. If the system restore works fine after you turn off the anti-virus, you can contact the manufacturer of security software and check if you need to change the settings

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  If the problem persists, perform the restore from Winre system.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help you.

• Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation. I had to plug it, but the printer does not respond now.

  Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation.  I had to plug it, but the printer does not respond now.

  Is what brand and model of printer?

  I do not work unless your new router has the same SSID and password wireless as the old. Consult your printer documentation to find out how to handle the situation. For example, some Lexmark wireless printers have a program called Configuration Utility Wireless in the Lexmark folder under all programs on the start menu that is used to set up the printer when changes are made to the wireless network.

• When I try to print on a printer connected to my win7 I get code "printer not responding" 105-100003

  How to fix error code 105-100003

  I am running windows7 on my host network and vista on the other computer. I am able to connect to the correct internet on vista computer, but when I try to print on a printer connected to my win7 I get code "printer not responding" 105-100003. I printed before and I have not changed or added to any software since. Both computers are desktop computers and connected by ethernet cable. I have run diagnostics and checked all cables. I have a modem 2 son I had about 2 months.

  Hi, Jimmy.

  Make the printer and model would be useful.  Thank you.

  Try the following:

  If your printer is connected via a wireless network:

  1. Make sure that your printer is turned on. (Start button / stop is turned on).
  2. Make sure that the blue LED of Wi - Fi on the front of the printer is on and stays on.
     • If the blue wireless LED flashes, your printer is not connected to your router.
     • 1. Follow the steps in the configuration of wireless network Guide (named the network installation Guide, if your printer has Ethernet printer capabilities) to connect your printer to your router.
       2. If you are unable to connect the printer to the router:
          1. Turn off the power to the router, and then turn on the router
          2. Follow the steps described in the [wireless] Network Installation Guide once again.
          3. If necessary, see what should I do if I can't configure my all-in-one printer (including the connection of wireless configuration)?
  3. When the blue LED on Wi - Fi from your printer stays on (not flashing):
     • If the error ' printer does not "occurred while you have been setting up the printer:
     • 1. Open Software Center.
       2. Select the tools of the printer, and then select Printer Setup Utility (under Tools).
       3. Follow the on-screen instructions to set up the printer.
       4. Try to use the printer again.
     • If the error occurred after you completed the roll-out of your printer from Home Center Software:
     • 1. Make sure that the print queue is online.
       2. From your computer, click Start > settings > printers and faxes (or start > printers and faxes).
       3. Click on your printer.
       4. In the printer menu, make sure that use printer offline is not checked.
          NOTE: These steps may vary depending on your operating system.
       5. Try to use the printer again.

  If the error persists:

  1. Remove the printer from your computer.
     1. Select start > settings > printers and faxes.
     2. Right click on your printer, then click on remove.
  2. If your computer is WINDOWS VISTA or WINDOWS 7 OS, turn user account control.
     1. Select start > Control Panel.
     2. Double-click user accounts.
     3. Click turn user account control on or turn it off.
     4. Select the check box use user account control.
     5. Click OK.
  3. Configure the printer again.
     1. Go to start > programs > Kodak > Kodak Printer Setup Utility.
     2. Follow the on-screen instructions to set up your printer.
  4. Try to use the printer again.

  If the error persists:

  1. If you have updated to the Home Center Software v6.x or greater, disable the Hello Service.
     1. Select start > run.
     2. Type services.msc in the box, and then click OK.
     3. Locate and right click on the Hello Service and select Properties.
     4. Since the "Startup type:" drop-down list, select Disable.
     5. Click OK.
     6. Locate and right click on the network AiO Kodak Discovery Service, then select restart.
  2. If you configure your printer, run the KODAK printer setup utility.
     1. Select start > programs > Kodak > KODAK Printer Setup Utility.
     2. Follow the on-screen instructions to set up your printer.
  3. Select the Hello Service.
     1. Select start > run.
     2. Type services.msc in the box, and then click OK.
     3. Locate and right click on the Hello Service and select Properties.
     4. Since the "Startup type:" drop-down list, select automatic.
     5. Click OK.
  4. Try printing from the center of renovation again.

  If the error persists:

  1. Make sure that any firewall software blocking the required services and that it does not block the firewall of the router. See cannot use a wireless printer to computer on the same network with firewall security program.
  
  NOTE: If you use BitDefender Total Security 2010, the problem can be solved by turning on the game mode in the firewall. If it does not turn on the game mode, temporarily disable the firewall to enable wireless printing.
• Make sure your computer is not connected to a virtual private network (VPN) or wireless home another network of safe working when you use the printer on your network. See using printer with the virtual private network (VPN).
• Check that your printer is not connected to the network trouble with the same name (routers with the same default SSID in your area). It is common for users to keep the value by default, out-of-box, SSID as the manufacturer provides (for example the linksys). If your router still has the default SSID, change the SSID under a new name specific to your router.

NOTE: updated to the latest version of the firmware of the printer and the software when prompted will help you have the most reliable connection possible. Go to www.kodak.com/go/aiodownloads.

If the error persists, contact us.

http://support.en.kodak.com/app/answers/detail/A_ID/36674/selected/true

• HP Envy 5530: Printer not closing

  Sometimes the printer will not stop. I press the power button / stop and it will work for cut you during a certain time and then freezes. Then I have to unplug it to stop it. This happens more often than otherwise.

  Hello @Rocky4052,

  Welcome to the Forums of HP Support!

  I would like to help you today to solve the problem of response of power button that you experience when you try to stop your HP ENVY 5530 e-all-in-one printer. This problem may be due to a problem power or a problem of programming within your printer Firmware. Can I please you follow the steps below to isolate this problem and fix it.

  Step 1: Check of power:

  Please plug your printer directly into a wall outlet for power. Power strips and surge protectors can cause your printer not responding correctly. Once your printer is plugged directly into an outlet please test. If the problem persists, proceed to the next step.

  Step 2: Perform a power reset:

  1. Turn on your printer
  2. With the printer on , please unplug the power cord to the back of your printer
  3. Leave the power cable disconnected for 60 seconds
  4. After that 60 seconds plug back power cord in
  5. Your printer should start up on its own

  Once the printer lights please test your machine to make sure it works. Should everything work properly please press the power button on your printer to powercycle the machine and check if your computer turns off as per normal. If "closing" issue persists, proceed to the next step.

  Step 3: update Firmware:

  The Firmware is the internal programming in your printer. Is there an internal corruption in your printers Firmware, it can cause performance within your product. Therefore, I would like to confirm that your HP Envy runs the latest version of the Firmware. Please click here to download the last Firmware update. Once the download is complete, please follow the guests to the screen to 'send' the Firmware for your printer. Once the Firmware in your HP Envy also attested to date please test your machine. Once you confirm that your machine is running according to the normal, please use the power button on your printer to powercycle the machine. If the "closing" issue persists, please proceed.

  -Source

  Please reply to this message with the result of your troubleshooting. If the problem continues then a Semi full Reset programming may need to be performed on your machine. I can't wait to hear strings attached good luck!

• HP 5535 won't scanner, printer not found error message

  I have a HP Envy 5535. I've only been able to scan with it once. I scanned 22 documents, after HP Scan Doc 4.4 running. Every time the scanning HP Doc says everything is OK, but as soon as I try to do an analysis of test, I get the error message "printer not found." I also tried this scanner with my McAfee virus firewall off the coast, and it still does not work. I have also identified it on McAfee as part of my network.

  Hi @prazdancr,

  Welcome to the HP Forums!

  I'm sorry that you can not scan with your HP Envy 5535, but I'm happy to help you!

  To get help, I'll need to know:

  1. If you use Windows or operating system Mac and the version number. To find the exact version, visit this link. Whatsmyos.
  2. If the printer is connected, wireless, or USB.
  3. If the printer is capable of making copies of itself.
  4. If the power cable is connected to a surge protector, or directly to a wall outlet. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  In the meantime, please try go through this guide to scanning. A "the computer is not responding" error message during scanning.

  I hope hear from you soon and have a great day!

• Photosmart 7520 e all-in-one printer not turn on, green transformer upward and then turns off.

  7520 E Photosmart all-in-one printer not turn, transformer green light comes on then off again once, unplug the left and I tried once again even.

  nothing is dead.

  Hi woldtopper,

  I understand your Photosmart 7520 is not turning on and will remain lit. Please follow the steps in troubleshooting in the following document; The HP printer will not be running or to respond when the power button is pressed.

  If the problem persists, I recommend calling HP and let know, the issue and the steps you have already performed. It may be able to let them know that you completed all the steps in the HP document #c01321436.

  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

  I hope this helps.

• I'm more able to print messages from Thunderbird. By clicking on the "print" key does nothing. Clicking on give the preview before printing a printer not found error message.

  I have recently installed Windows 10 on my machine (upgrade to 8.1)
  The "print" button does absolutely NOTHING. A printer NOT FOUND of error occurs when I try to get a preview of the message.

  All of the suggestions.

  the configuration editor allows you to change the entries in print.printer to the default values * right click and reset

• HP Envy 4500: Printer not found error message

  Just hooked up this printer to a Mac Mini end of 2012 4 GB of ram, processor 2.5 GHZ of Intel, IOS 10.11.5 I get the error message "printer not found."  Still printer is plugged into the USB port and marked as default printer.  Have to pull plug - n-new power printer, then it works.  Please let know us, I downloaded the drivers did I miss something?

  PS Site Web HP says printer out of warranty in 2015.  For 3 years we have used just like a copier to a company.

  Download and install this: http://support.apple.com/kb/DL907
  
  Then, reset the printing system:
  
  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• LaserJet Pro CM1415fnw: HP Laser Jet Pro CM1415fnw prints not (message offline)

  On an irregular basis, my laserJet pro does not print, and it gives a message in offline mode in the print dialog box in MS Word. If I turn off the printer, then turn it back on then all is good. Can you suggest a cure?

  Hi @daleary,

  I was able to open the link in Chrome. Maybe try, if you're still having problems. Here's the link again: printer is offline (Windows).

  Thank you!

• Shortcuts to printer not saving preferences do not

  Hi all

  I am able to create new print shortcuts in preferences, but the settings are not saving. If I watch settings which is the color then look at other one who is B & W the other settings appear in options. How can I get the shortcut settings to save correctly. I clicked on apply then OK after you have created. I have even come out right and come back and see that the shortcut has changed.  Color LaserJet MFP 400 with 3 installed tray and firmware updated. Windows XP using LAN to print.

  Thank you

  Solved with a work around.

  Instead create different shortcuts printer the printer, I created a second installation of the printer, renamed it (letterhead) and now what impression the choice is made at the level of the printer not on the level of preferences. I've also renamed the instal Moose (EverydayPrinting) printer and set the prferences in that one needed. I know a little awkward, but this just HP does not take parameters. The user is satisfied with the result.

• Advantage of ink HP deskjet 2545: My HP deskjet ink advantage 2545 printer not scanning

  Please, I got my printer a few days ago. It prints without any problem, but it is not the scanner. When I click on "scan a document or photo" in HP printer not great companion... absolutely nothing happens. I tried to uninstall the printer software and reinstall its still the same issue. Please I need urgent help because I got the product mainly to analyze things. Thank you

  Hey @nnamdiokon,

• USB printer not detected on satellite series?

  Hello

  Have a laptop Toshiba Equium and today I bought a printer from a different manufacture.
  USB cable is not supplied with the printer (not good things) and so had to buy a.

  Laptop does not accept the USB cable saying something like USB isn't signwritten with the laptop?
  I have no idea what has happened?

  I'm sure that the printer is 100% and the USB's all nine... the majority of the facility took place until this problem is with the USB
  The laptop never had a printer connected before in 18 months of ownership.

  Any help!

  Thank you

  Hello

  First of all, you must make sure that you bought a straight cable and which is compatible with the laptop.
  My sister uses a USB printer and the cable that she bought looks like this;

  [USB 2.0 printer cable | http://images.tigerdirect.com/skuimages/large/C184-4000_U_6-main.jpg]

  But the note man; You should check this printer installation instructions.
  Sometimes the driver (shipped with the printer) must be installed before you connect the printer to the computer!

  What you could do to first remove the USB ports, controllers from Device Manager and reboot the laptop.
  After restarting again the USB ports must be installed again.

  After this short stage, you continue with the installation of the printer described in the manual!

  Good bye