printer print additional pages of 'code' on every print job

Similar Questions

• Print additional pages

  My 3210 all-n-one prints an extra page after each print job (each picture) each additional page has the same number of 2345 X - why? How to fix?

  Hello

  Install the following hotfix, it will solve the problem:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-126392-1&cc=us&DLC=en&LC=en&OS=4159&product=439488&sw_lang=

  Kind regards

  Shlomi

• HP Photosmart 3310 all-in-one print additional pages

  I have this printer connected to my Mac Book Pro for a Mountain Lion to 10.8.5.

  The printer is connected via USB.

  What began to happen recently, it is that whenever I have send anything to the printer, it prints - but then about 30-60 seconds later, he shot out one or two additional pages with a small '2' and / or '2345 X' in the upper right and then be slowed down.

  I uninstalled and reinstalled the printer.  I checked to see if there is a driver update and it does not appear to exist.

  Suggestions?

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-126392-1&CC=US&DLC=en&LC=en&os=4114&Product=439491&sw_lang=

• Print additional pages on Windows Server 2003

  Print jobs are stored in the spooler with the exact amount, but the number of printed pages that comes out of the HP4700 printer is most requested.  Verified that the spooler getting the adequate amount through information events logs.  For example, asked 20 pages of a particular document.  The spooler logs an event feel with a quantity of 20.  The printer prints 13 of the application, and then prints the requested 20, for a total of 33 printed pages.  The initial impression can vary - sometimes it's 4 or 6 or 13, but subsquent impression is always the original quantity.  Verified that the additional jobs are received by the printer through the log of the tasks use the HP4700 color.

  Please repost in Windows Server Disdussion at: http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.windows.server.general&cat=en_US_9741c575-ec92-42f8-85ba-00dfe1483cf5&lang=en&cr=US where experts in the servers will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My HP Officejet Pro L7680 print a blank page before every PDF print job

  My HP Officejet Pro L7680 print a blank page before every PDF print job, regardless if it's a PDF I create or a tht is sen for me.  All PDF files behave in the same way. The Document is good, but its annoying to have to go out the blank sheets and put back them in the printer.

  Hello @RMorley,

  Thank you for visiting the Forums from the HP Support! I understand that when you print pdf documents on your HP Officejet Pro L7680, it prints a blank page.

  There could be a few things gong here, we will make sure that you have not configured it to use a separator between the draw sheet:

  1. go to your devices and printers

  2. right-click on your JO L7680

  3. navigate to printing properties

  4. click on the Advanced tab

  5. click on the Separator Page

  It was empty or was there something put there? If something is listed here please delete and apply the changes.

  If there was no set of pages of separation, I would like to you to perform printing and scanning doctor > www.hp.com/go/tools- it was designed by HP to offer users troubleshooting and characteristics of fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  The PSDR find something, let me know the results?

  If you still print the extra, please check the size of the paper, that is - this currently fixed at?

  Please let me the following information if you still get the blank page before prints:

  1. What is your current operating system, Windows or Mac and what version?

  2. What is the connected printer, USB or wireless?

  3. If you print from the internet or e-mail you get the blank page or documents?

  Thanks again,

• K5400 to print additional Pages

  K5400 prints extra pages with numbers at the top.  They are 2345 X or just the number 2.  The page comes out about 30 seconds after the page requested (s) is printed.  It still not eject fully.  Not until the next time I have to print something?

  I have an IMac running OS 10.7.5, updated on all Apple software.  The printer is a HP Officejet Pro K5400.

  Hi jagmack,

  I understand that you have an Officejet K5400, which prints an extra page which is not eject after each print job. I'm sorry to hear what is happening, but I will do my best to help you.

  I would recommend that you download and run this update HP Print Driver Update critical for printing a foreign page address . After that, make sure you have the most up-to-date printer HP update as well. If nothing comes in your software updates, you can download manually by clicking here.

  Hope this helps, have a nice day!

• Why an I get the test page yellow and black with each print job. I have a HP PSC 1350

  Why an I get the test page yellow and black with each print job? I have a HP PSC 1350

  Hi - I assume that the page that you see printed is the alignment page.  This happens usually if the alignment process has not been made.  All you should have to do is take the printed alignment page and place it face down on the scan scanner glass and press.  Who must complete the alignment process and eliminate the page printing every time.  If you have problems, try following the procedure described in this document.

  Hope that helps.

• Photosmart All In One 209: Don't delete no print jobs every time I print

  Printer will not remove jobs from queue whenever I print. I reset printer queue and delete the printer files. Print the next time he does it again. Uninstalled and reinstalled the drivers. Check the setting for automatic winding and has been correctly defined. Don't know what to try next.

  Thank you - Sagedog

  Hi @SAGEDOG,

  Welcome to the Forums of HP's Support. It's a good place to find the help you need, other users, HP experts and other support staff. I came across your post and wanted to help.

  Then start the document of support for the HP printers - Print Jobs stuck in the queue (Windows)

  If the problem persists, I suggest that you remove the drivers and then reinstall the full features software.

  Please follow the steps to remove the drivers:

  Press the Windows key + X->, click on Control Panel-> in the upper right corner, under the chosen category notice-> click on hardware and sound-> device and printers-> select the printer-> on the top of the page, click on the print server properties-> click the tab drivers-> installed slot - select one by one and then delete everything--printer drivers click on apply and then click OK.

  Restart the PC and then install the driver software complete features from disk or from the Web site, using this link.

  I hope this helps. Let me know if you need additional assistance.

  If you are unable to reach a resolution, please click on accept the Solution to help others with similar issues.
  If you like my assistance, please click on the thumbs up icon.
  The two icons are below this post.
   
  Kind regards

• LASERJET 2420: hp2420 LASERJET ATTN LED FLASHES WHEN THE WORK of PRINTING SENT. ATTN PRESS MUST BE ON EVERY PRINT JOB TO PRINT

  hp2420 LASERJET ATTN FLASHING WHEN PRINT JOB SENT. ATTN PRESS MUST BE ON EVERY PRINT JOB TO PRINT

  You have a control panel on the printer which should have a post about that.  Most of the time this occurs when the size and or the type of paper, the work of the application is not the same as the printer settings and pressing the button you tell the printer to use paper so that it is set.  Most of the time the best solution is to define the type of paper and size and everything and all at once for tray 2 which should solve the problem.

• 6500 accepts the print job, but prints blank pages - even in copy mode

  6500 accepts the print job, but prints blank pages - even for copies. Printer ink is full.

  WOW! At least temporarily, my solution is press Setup (the key) right arrow to TOOLS #6 tab. type OK.
  Tab (# 2) clean the print head. Hit OK. If all goes well, take a step back, let the process and be surprised. A second test may be necessary.
  It works at least for a day. Maybe it's your solution.  Jesus is our only hope!

• HP Officejet Pro 8000 Wireless - print out this partial test page after each print job

  I get this page a partial alignment (?) after each print job.  I reinstalled the software, aligned and cleaned print heads, contacts cleaned print head, but still get this page.  Pretty frustrating.

  This image, I see that the printer does not align correctly.  If the unit is out of alignment, then the sensors in the printer detects it.  That's why the printer is constantly trying to perform the alignment.

  There is a document with the steps to solve this problem.  The document helps walk one by checking the cartridges and the parameters to determine if the problem is software or hardware.  Click here to access the troubleshooting document.

  I hope this helps.

• 4504 envy: How to cancel a print job of 58 pages sitting in 4504 envy

  I tried to cancel a 58-page print job, sitting in the printer. Work has been queued completely into the printer.

  The printer has a page fault after he printed page 4. say a page was too long to print. 2 pages had slipped into set. I followed all of the usual forms - no paper stuck not, reset button, etc.  but nothing has worked.

  Currently, I have the printer off.

  I was thinking about the uninstallation of the machine and reloading maybe that could break the cycle.

  This printer is less than a year and was used only rarely now.

  All of the suggestions. Help, please.

  Link

• Printer all-in-one HP 5610: 5610 all-in-One prints blank page instead of print job

  When you send a print job, I get an empty page instead. I have:

  • Check the ink cartridges
  • Checked the connecction
  • Reinstalled the drivers
  • Don't have a full system reinstall to a date before the start of the problem

  None of the above works. I even went to a photo that I printed and tried to reprint - no luck.

  At the end of the roll...

  Thank you.

  Greg

  Hi Gregory_Mi,

  Thank you for your answer!

  I recommend to use our HP print and Scan Doctorand let me know what happens!

  If this does not resolve the problem, consider replacing ink cartridges refilled with genuine HP ink cartridges. This way, we will know if the problem is with the cartridges themselves.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  Keep me posted!

• OfficeJet Pro 8500 has prints a blank page before each print job

  He just started this recently. Prints a blank page before each print job. Because of this quirk, I can't print now before backward.

  Hi Stevienext,

  Thanks for your response with your OS info!

  I would say that running the HP print and Scan Doctor to start to see if that solves the problem.

  If the problem persists, continue.

  Then, try to print from a few different programs to see if the problem occurs in only program or more. This will help us better to 'target' the question.

  Let me know if the pages are still printing in white and that the programmes seem to be giving you the problem.

  I'll do more if necessary suggestions there!

  Have a great weekend

• How can I change the value of a print job in Visio 2003. It is for 1 or 2 pages, I want that he 9 printing pages. Thank you.

  How can I change the value of a print job in Visio 2003.  He is currently configured to print pages 1 and 2, but I want to print all 9 pages at a time.  Thank you

  You can remove 1-2 and type 1-9? All HP and Epson printers I have worked this way.

  That's all I can offer as I'm not familiar with your printer.