Printer printing blank first page

Similar Questions

• HP Laserjet P2015d: HP P2015d duplex printing blank first page

  Hello everyone

  I have in my office, among other things, the printers two HP Laserjet 2015b. We use it on Windows XP, 7 and 10. Whenever I put them for the first time, I have the same problem with the drivers.

  From XP and ending with 10, there are 3 packs of drivers, PCL5, PCL6 and Psalm none of them installs ok, printers work, but there is a problem in duplex printing, gives me a headache. I try to only print only one page (for example: 1 page, current page, etc.), printers print on both sides of the paper, first white and the text on the second.

  In XP and 7 that I managed to solve the problem in a very strange way, install a software package and manually change the driver with that of another pack! For example, I installed PCL 6 and I changed in the printer properties Advanced pilot, the PCL 5 driver. And that after many attempts to find the best combination!

  Now, I have improved my work to 10 Windows 32 bit laptop and I can not solve the problem either. Any driver, I choose the 3 special indeed for Windows 10 or fom those made for 7 or XP, try to only print that one page in duplex, the printer prints on both sides of the sheet of paper, white on the first and on the second text! And I find no option in the settings of the printer to solve this problem.

  Can someone help me with this problem?

  Thank you

  Thank you all for the advice and opinions. I did it!

  After many, many attempts, I noticed a small option "allow manual duplex", which was enabled by default, and which appeared in print (MS Word and other programms) main window only when selected duplex! Strange! I disabled it in the Advanced tab of the printer properties and everything is normal now!

  Now I can use the printer again only in "duplex" mode, and it prints a page "simplex" and the two following pages "duplex", because it suppose to do!

• New Windows 7 pro machine always prints the first page in a direction, but all other pages are printed in a different orientation

  We bought a new PC for one of our employees that is running Windows 7 Pro 64 bit. We have several printers throughout our office area. There are three printers that this person will print to the two Ricoh printstations and a Brother Laser printer. Any printer that employee uses printers still print the first page, a focus on the next page and all other pages in the other direction. The first page is always printed in the opposite direction of whatever orientation has been selected.

  If it has a four page document and select landscape as the orientation, the first page prints in portrait orientation while the other three pages will be printed in landscape. She can go back and print the document again and all four pages will be printed in the right direction. This happens no matter which printer she uses, as well as any program (Word 2010, Excel, Adobe, web pages, etc...). Any suggestions?

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this information helps.

• Print the first page of a multipage document

  Can anyone tell me, when broadcast a mutipage document printing (in my case a book), how get the first page to print on the right side of the paper?

  At present, all pages except the first print normally (e.g. left and labor right pages side by side on a sheet of A4 landscape). The fist page print however centered on the sheet when it should be on the right.

  I can't add additional pages in the face without messing the page numbering. At least I can but it's embarrassing.

  I've looked through the print dialog but could not find something here that helps.

  Any other ideas?

  I print on an inkjet Canon off ID CS3.

  That's how...

  Add a blank page was completely defined on an even number, and then start a new section and renumber the first real page.

• In the remote desktop while printing 2 or 3 pages printer usn suite. It is printing only first page. Pls help me solve this problem

  In the remote desktop printing 2 or 3 pages continuously. with the USB printer. It isn't printing first page only 2nd and 3rd pages. But in the task of the printer local special impression is get queue. It's like appear and disappear. Please help me solve this problem

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  General Forum(Windows Server) Technet

  Hope this information helps.

• HP 7310xi - Windows 7 - prints only first page top

  I have a 7310xi AIO Printer printer that works perfectly with my systems running Windows XP.  I installed the printer driver HP AIO 7300 on a new laptop under Windows 7 computer and had no problems with the installation. The pilot reported that the printer is connected and ready.

  Every time I try to print the printer stops and ejects the first page after the first 1-2 "text printed.  The spooler to print in Windows 7 displays "error - printing" message.  Then the spooler retries the operation of print with the same results as above.  The only way to stop him joining must cancel printing from the spooler.

  I have studied similar problems on this forum and have removed/reinstalled the HP AIO 7300, deleted and reinstalled the printer itself, print driver tried different drivers (for example DJ5500) to determine if there is no difference (it is zero, the same thing happens with a different print driver).

  My printer is connected to my network behind a network bridge.  I can connect to the management console HP7310 to the IP address of the printer very well.  All my other systems running Windows XP and have no problem.

  If anyone has any ideas regarding what might happen that I'd appreciate your comments.  Thank you.

  After not receiving any response on this forum, I managed to solve my problem with a print substitute on Windows 7 (64-bit) driver

  After removing the driver for the HP Officejet 7310xi, I have installed and configured the print driver for the HP Officejet Pro K8600 and I can now print very well in Windows 7 64 bit.  The duplex function works fine with this driver as well.

  This proves with certainty for me that there is a problem with the HP 7310xi driver for Windows 7 64 bit.  This forum seems to have paid attention on getting the scanning function works correctly on the 7310xi.  Intriguing in the fact that no one ran into a problem with the basic print functions.

• Why each print a first page with info (file name, directory, model..)) ?

  I was looking for a solution know how much I printed, some time before and I found... but it keeps printing a page for each print with info... and now I don't remember the procedure I did to get here, so I don't know how to solve this problem... I know that info I geve you is very poor... but I have no recollection of what has past... Thanks for any help Giancarlo

  The additional sheet could be of two types:

  • Page spooler of separation ; Windows and * n * x systems the two supported methods to implement these pages of Division of labour.
  • Information page of document produced by applications such as Microsoft Word.

  You should be able to search these terms and find instructions, specific to your operating system or application version, showing you how to stop their production.

• How to print first page first, not last page first? HP Office jet 6700 Permium

  I have this "HP Officejet 6700 Premium and I want to know I can get it to print the first page first instead of print last page first or even to print two pages on a short note paragraph only.?"

  Hi Majeski,

  Thank you for your answer!

  On your desktop, you will have an icon HP. Must say HP solutions Center, or it could be the name of the printer. Double-click on it, then select Preferences defined, make sure you are on the tab layout, you can change the order of Page from front to back or back to the front. Please see the pictures below as examples:

  

  

  Hope this clears things up for you and have a great day!

• 5520 Photosmart HP e-All-in-one: only print first page

  I am trying to print a copy of a statement online and my printer prints the first page and then stops.  I don't see any error anywhere.  It is connected wireless.  Thank you.

  @MERK1

  The printer may have ran into the content, that may not translate correctly.

  What?  Printing software must translate everything you want to print on the paper in the "printer language.  Some content is easily converted, not-so-well other content.  Banks, these sites that offer tickets and coupons sites, in particular, tend to create content that is not always understood by the printer.

  What should do?

  Ideas

  • Reinstall / update your PDF reader (Adobe Reader DC / Foxit)
  • According to the Web page format > download content on your computer as PDF - print as image using Adobe Reader / Foxit
  • Easier overall: use Snip to create an image of the content > save image > print the picture using your printer software.
  • Try using another browser - for example, if you use Firefox, Chrome.
  • Check your Web site for more information 'browser support' - use a supported browser interface
  • Use a newer version of Internet Explorer and print "according to your choice on the screen.

  Open the Web page in Internet Explorer >

  Left click and hold > highlight / Select the area on the screen that you want to include in your print >

  Click file > print Preview >
  Replace "built on scree" BY "Under the name selected on screen" >

  Set any other options and print

  • Enable cookies in your browser
  • Beware of put too much of a good thing > if you block all THE Popups, some content on your Web page may be not visible and / or available to the printer.   You may need to loosen restrictions temporarily.
  • Allow the Web site to use its own fonts - this may or may not help based on the content

  Reference:

  Manage the print with preview output before printing

  Sections:

  • Preparation
  • Print mode browser "only selected".
  • (Web) Content that do not print
  • Options > Web content persistent impression

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• Microsoft Word only recognizes / prints first page of a multiple page document?

  I did something to my Microsoft Word program. I think it is the 2003 version. I have no idea of what I did, but now it will only recognize the first page of a document, I create. When I print it only prints the first page and the bottom of the screen never shows anything other than "Page 1". No matter how much time there is no 2 page or all the pages will be never created or printed. I looked to each icon and the option in the toolbar and may not know how to reverse this trend. Can someone help me? Thanks, Andrea

  Open Word and click Help > detect and repair.

  See if that helps.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Groups discussion board link above.

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Word.docmanagement&lang=en&CR=us

  General discussion of Word Group.

  If you don't get an answer here, you can try the above.

  See you soon. Mick Murphy - Microsoft partner

• The LEXMARK 2300 series printer displays only the first page in Vista

  Printer only prints the first page but another page #s are displayed; However once you have printed the first page, other pages do not print and those page # disappear off the screen

  Printer only prints the first page of the document, even when the other page #s displayed. is my badly installed driver because I did everything he asked to uninstall then reinstall

  Hi lcwater,

  Please do not forget to download the latest drivers/software from the Lexmark Web site:

  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US&segment=download

  In addition, please see the following article on the Lexmark Web site:

  http://support.Lexmark.com/index?page=content&ID=SO4442&ACTP=search&viewlocale=en_US&UserLocale=en_US&segment=support&ProductCode=&searchID=1275498114885

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Print 1.5 pages of a document of 4 pages?

  I have a new laptop (ASUS) with Windows 8. The all-in-one printer, HP Deskjet F4580 found immediately and appears as connected. But... I can only print the first pages 1 and a half of a 4-page document.

  I downloaded the drivers recommended etc. I ran the HP doctor. Everything said the connection is OK and the printer is visible and connected, but I don't get that part of the document. I tried several multi-page documents and it stops always at the same point in printing.

  I used my "old" laptop and you can print the documents in their entirety.

  Someone at - it ideas I can do next?

  Interesting.  How is your internet connection on the computer?  This computer does show signs of loss of connectivity?

  This looks like a possible problem with the print spooler. You get the error messages or the printer indicates something specific like the flashing of lights, stuffing, etc.?

  What method did you use to install the printer (printer Install Wizard, software disk or download from the web)?

  Have you already tried to uninstall and reinstall the drivers for this printer?

  Is your "old" laptop has Windows 7?

  Answer these questions for me please I know the best course of action to be undertaken.  If you have not uninstalled the drivers, I would, then use this link to install the printer Deskjet on your PC in Windows 8.  This will reset all the settings in the printer properties.

• Cannot print all legal pages from Excel

  Trying to print an excel spreadsheet in Windows 2007, changed the regularly when printing legal and under printer properties.  It prints the first page legal, the rest regular.  It says apply to all pages, click more sizes down, I did and changed, still 1 remains legal, regular page.  Help?

  It is not a windows 2007, theres win7 and Office 2007

  In Excel 2007, you select & change the settings for printing through the Office Orb Btn, and from there you can get a preview of your selection

• LaserJet Pro P1102W: P1102W displays only first page or two of a job

  A week or two ago, my P1102W stopped the complete print job. It would seem that the first page, sometimes two. Would the Green LED flashes quickly rather than the pulse slow (3 seconds) when a work is done. By pressing on the red X button often causes another page to appear but it only works one or two times, after which the rest of the work was lost.

  Hi @Tuttle,

  Welcome to the HP Forums!

  I see that your HP Laserjet Pro P1102w only prints the first page or two of work on Windows 7. I'm happy to help you!

  If please, try the procedure described in this guide, Print Jobs stuck in the queue (Windows)and let me know what happens! (Even if the title of the guide may not correspond to your question, I think that the solutions will help.)

  I hope this works!

  "Please click the Thumbs up icon below to thank me for having responded."

• different first page header xml publisher reports

  Dear all,

  I have a RTF model I need to print deparaments first page header and another page remaining heading, I tried using the first page different from the characteristic word, but it is not working properly, in my rtf after first page I used for each @section: GHEADERS so first two pages, it feels like headers and for other pages , it is printing another heading so I need only the first page to be printed header different, please help me it's little urgent.

  Thank you

  Hi KP1,.

  I sent the rtf and the XML for the mentioned mail ID please check and let me know.

  Thank you