Printer prints not according to preview before printing, it will display on the right side.

Similar Questions

• I can't get a site to print an entire page. on the right side is cut off.

  The page is too large in width. I tried to 'fit to page' but nothing helped.

  Some pages are not designed with printing in mind...

  You can switch from portrait mode landscape to adjust to the page on a wider width.

  Some users find it faster to copy and paste just the party concerned in a word-processing program, but often some of the styling is lost in the process.

  Or you might consider to change the page before printing, for example, by using an add-on to remove the sidebars or other items you don't need in your print (assuming you don't need a faithful replica but only content).

• Black print cartridge registers is not on the right side of the page

  CP1215 has developed a weird problem! Recently replaced the black print cartridge (new, original HP).

  Printing a document in BLACK color, this isn't a problem. Crisp and clear impressions.

  Print the same document in color gives completely misaligned recording BLACK on the side RIGHT of the page. The side LEFT is clear!

  Printing CONFIGURATION PAGE confirms the problem. Registration of marks below on the LEFT are perfectly aligned.

  But on the lower RIGHT, all colors are aligned with the exception of black - the black line is much higher and offset printing to the right where it should be. That's why the color prints are all blurry on the right side of the page.

  Calibration several times running, check the drivers etc.

  Any help/advice is really appreciated!

  Hi Gemini02,

  Sorry about the long absence, but was busy with other stuff. More beat troubleshooting according to your last email.

  First of all, a few answers to your questions:

  1. don't know what the problem is. Don't want to start replacing immediately.

  2. all ink levels are more than 80%; Black nine.

  3. all the cartridges are original HP Black has been replaced recently, the other three provided with your printer.

  4. the paper is double-a premium, 80gr

  5 paper is set on the plain. Have you tried with the HP90 and light parameters too.

  After following your instructions of troubleshooting:

  6 printer moved closer to the wall outlet - it's a machine heavy tho!

  7 pressed & held green button. Config and supply status printed pages.

  8. print with other applications (Photoshop, Word, PowerPoint and Adobe Reader).

  Problem persisted. Registration completely to the bottom of the hand right side of the page and the worst in the lower corner straight out.

  Acts of desperation next, pure:

  9 deleted each cartridge, shaken several times on the axis horizontal and then triggered one end while decreasing the other and vice-versa several times. Replaced in the status bar.

  10. Ran HP Toolbox calibration.

  11. test print to Adobe Reader - same document as before. Substantial improvement!

  12. Repeat steps 9 and 10. Further improvement.

  13. Repeat steps 9 and 10 more. Almost no problem checking.

  14. Repeat steps 9 and 10 more. No record of the questions at all!

  Then, to avoid the location and power source:

  15. moved printer in its normal location.

  16 connected the printer to its normal power source - an extension of good quality.

  17. reprinted on the same page. No registration no questions at all.

  I have no idea why the steps 9 and 10 would have such an impact. And why repeating them would improve the print quality progressively until no problems are observable. I have detailed my action here in case they can help someone else.

  I thank very you much for the support and guidance you provided. If you have any idea why the repeated shaking and calibration solved this problem, I would be very interested! Keeping in mind I ran several times previously without success to calibration.

  Thanks again for your help.

• "My Media" will not play on the right side of the screen

  I am currently working on a music video, and I'm trying to test - Watch clips from 'My media' to make sure they are what I want before putting them in the timeline at the bottom of the screen. The problem is that these clips are not displayed on the right side of the screen more. When I first load iMovie, they do, but then after that I look at some of my video in the timeline panel, right screen seems to be stuck on this and will play not the clips of "My Media", although I can hear the audio. It's very frustrating, because I'm basically at a point where I have to restart iMovie after each clip that I add to my video. Any help would be amazing.

  This is the first posting, I have seen with this problem. I can't duplicate although I do not see a hesitation before the video plays in the Viewer when I move the playhead on timeline to the media browser. I suggest you open iMovie, hold down the command and option keys and the removal of preferences in the window that opens.

• Printer print, when I print documents to the right side of the document gets cut it does not finish what was on the screen.

  When I print documents to the right side of the document gets cut it does not finish what was on the screen.  This happens on all documents.  I don't know what to do.  I got a HP Photosmart Premium and he did it so I thought it was defective and bought a HP 7520e all in one and it does the same thing.

  Hello

  All changes made to the computer before the show?
  Method 1:
  See the link, run the Fixit and check.
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/en-us
  Method 2:
  If the methods above do not solve the problem you can check this link and follow the steps.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  Method 3:

  Try to adjust the alignment on the other side. Follow the steps.

  1. Click Start.
  2. Choose Control Panel.
  3. Choose a printer.
  4. Choose preferably to the printer.

• HP envy 5530: printer Cup emails in width and loses 1/3 of the words on the right side

  When printing emails, 1/3 of the words from the inside of the right margin are cut and do not print.

  animal-lovers

  Welcome to the Community Forum of HP.

  Emails are tricky - and not all email clients are the same, neither are the browsers where you can print the email.  Almost anything could break the margins on the right side.

  Please take a look at the following and see if anything here helps - and you can also try opening your emails using another browser, too.  Yes, I know - eew.  But it might help to see what is happening.  In addition, it could give you an idea, if the problem is universal, i.e. emails look bad / feel bad no matter what you use.

  You might be able to use 'Fit to page' in print preview mode, or you might be able to control the margins by adjusting the actual "margins" - also in mode print preview.

  If all else fails, you may view the email and take a 'Snip' from the email, save it and then print the image you saved.  Ick.  But it could be something that you could use as a last resort.

  Manage the print with preview output before printing

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• How set you Firefox to print what is on the page of e-mail without adding a left marghin of 1 inch to this page, which affects a part of the right side of the page?

  When I get an email page often has a certificate that I would like to print. With the help of printing at the top of the page displays the e-mail as a page as it appears in my webmail. When I hit the print button on this page there is always a margin of 1 inch, added to the cup of the printed page on the right side of the page you want to print.

  My printer accepts what I send from word, pdf files as they appear on the screen, why Firefox doe not send the same images that appears on the printer?

  This seems to happen whenever the screen displays an image that is located near the border to border and no text. When a margin is part of the e-mail message or it's text, this seems not to happen.

  HELP please. I really need to be able to print what is displayed to print the appropriate document.

  Thank you

  Bob Ferguson
  Sonoran Consulting & Finance, LLC

  Some pages add their own margin to the minimum margin that is defined in the configuration of the Page. First of all, you could reduce the margin here:

  Alt + f (display the classic file menu) > Page Setup > margins & header/footer tab

  Second, you can try to use shrink to fit. However, if the image is a background image instead of the part of the content of the page, which is perhaps no effect.

• Color MFP M277dw LaserjetPro: Problem in black with print on the right side of the paper on a HP Color LaserJet Pro M277dw MFP

  When I print a page of text or an image to be in color or black and white about 1.5 inches on the right side of the page, the black part is dimmed.  I tried to shake the black toner, but nothing has changed...

  There is obviously enough ink that the rest of the page prints fine.

  Please advise on how to deal with this.

  Thank you.

  Can you post a sample. It could still be the toner cartridge there is a load inside roll and if a part of the roller is defective so that area will print light or does not print at all. It could also be the laser/scanner lens dusted the course in this area. Most of the time, it is the toner cartridge.

• HP Color LaserJet MFP M277 Pro: Problem in black with print on the right side of the paper on a HP Color LaserJet Pro M277dw MFP

  When I print a page of text or an image to be in color or black and white about 1.5 inches on the right side of the page, the black part is dimmed.  I tried to shake the black toner, but nothing has changed...  Should I replace the black toner?

  Hey @candreas,

  Welcome to the Forums of HP Support!

  I see that you have some problems with printing faded on the side of your impressions of your printer Laserjet M277dw range. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve print quality problems with your printer.

  If after following the above, are you always see fainted to prints, either the cartridge or the printer needs to be replaced. You can contact the HP Support by clicking here and filling out the form below.

  Please let me know the results after following the above. If you are able to improve the print quality or to reach a resolution with the support, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• The right side F4140 printing line

  When I print something on my printer HP Deskjet F4140 on my Mac computer (running 10.9.4) I sort of dotted line on the right side of the page.  See photo.

  A few times the points are longer, sometimes (as in this picture) they are shorter.  But the stupid line is still there.

  Any ideas?

  Thank you very much!!!

  Melinda

  

  Welcome to the Melinda forums

  I have seen your post and on the lines that you see on your print images out of your Deskjet F4140. I seem to think that there may be a driver conflict and we suggest the following steps:

  1. Mac OS x: how to reset the printing system (This will remove all printers)
  2. Repair disk permissions
  3. Restart the computer
  4. Add new printer (do not use the AirPrint driver)

  I hope that helps!

  Enjoy the rest of your day

• Photosmart Premium ink cartridge stuck on the right side of the printer.

  I have a HP Photosmart Premium printer, the ink cartridge is stuck on the right side of the printer. Keep receiving an error message that says: "remove paper jam and then press ok.  I did all the steps to clear any torn or ripped from the inside of the printer paper, there was never any paper in there for blocking up inside anyway. When I opened the top of the printer my container of cartridge will not move at all, he's stuck.  It won't control the printer or by my own doing when the printer is turned off without being able to. The error and lack of time with my printer cartridge do not allow me to use the printer, I hope you can help me in anyway possible. Thank you.

  It seems you have a carriage jam. Sometimes it can be a sensor that is bad and can not work properly. Here is a link that will help to transport jam

  http://support.HP.com/us-en/document/c01815807

  I would like to know if it works.

• How to get rid of the Skype pane next to the screen, it stops printing of emails on the right side of the screen

  I would like to print a newsletter I sent. However, a sign saying: e-mail, completely on the right side of the screen cover on a

  third letter to print. I think it's for Skype, I do not use Skype and want to remove this component, any ideas on what to do.

  ... a component mask... completely about a third of the letter to print.

  To print a message, click on the three dots on the command bar and select print. As the message itself will be the printed page, no other items.

  

• The printer Officejet Pro 8500 a cuts the words on the right side of all pages

  When I try to print a full page the words or the letters on the right side of the page that was cut about 11/2 in. from the edge of the paper.  I changed the layout of the page, but it does not help?

  Thank you for your response. No problem. I'm always happy to help you in the community forum!

• LaserJet pro 400 color: Blue lines on the right side of the page when printing in color

  When printing in color I get this blue line that occurs on the right side of the page. It is darkest near the edge and shoot low towards the printed part of the document. It is a vertical line that follows the entire length of the page. I printed a report of quality and it is always present. In my view, this indicates that it is a hardware issue, rather than software. Is there some rolls or the part that needs to be cleaned? Can you provide a link to the instructions?

  Thank you!

  Replace the cyan toner cartridge.

• I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

  I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

  The 'Print screen' button is misnamed.  In fact, what happens when you press it, it is that an image of the screen is copied to the Clipboard.  You must then open an application that can work with images (paint works) and paste in the opened window (or right-click > paste or edit > paste).  Then you can use the regular print of this application (for example, the file > print).

  You can also download free IrfanView.  It is a very handy utility.  It allows you to open and view a wide variety of image file formats and also has the capability of the bulk renaming of files and - for your current number - capture screen images and prints them out.