Printer Spooler not enabled: my printer does not print and my computer does not load the disc from the printer

Similar Questions

• Vista recognizes the printer but does not load the drivers - error 0x000003eb

  Have even tried to load drivers generic, just to see if it works, no chance.  I have on other computers with XP Pro on them and they picked it up, drivers loaded and works very well, but Vista is a different game. Tried plugging USB and gives the same error. Add a printer recognizes it, but it does not load the drivers. I can type the IP address of the printer and use a little from there prints 3 pages of a point, two pages are all kinds of different characters, it waste paper.

  Microsoft has looked everywhere and they want me to pay for OS problems out there and I'm not a fact. Program there is the problem that they should back is no Vista how the wrong subject.

  Looks like you can have the wrong drivers or not everything you need (drivers, firmware and software) or you do not have the installation in the right order (some require that the printer is connected and on, others require it only and power off, and other required he be attached and powered at a point issue).  I suggest you go to the Xerox support page for your printerhttp://www.office.xerox.com/printers/color-printers/phaser-6250/sprt-enus.html and download everything you need for your printer and your version of Vista.  Then read the articles about how install and configure the printer (unlike many other devices, printers are not intuitive and are picky about the way in which they are installed and will not work if not done according to the instructions). If necessary, that it includes a toll-free technical support number where they may be able to guide you through the process, or at least make sure that you understand the conditions, steps and the order of the steps to do it right yourself.

  I checked on the error and this can mean many things for a great many printers - but I could not find any reference to your specific printer to help us.  It is said that it was a mistake than if you have enabled and UAC if off and then back on it would solve the problem - but that sounds not just for me.  You really need to discuss this with HP and I don't know that they will have you place and operate at any time.  I don't believe technical support is costly (there is no mention of this at all) - but if the fact of telephone support, information on the website is free and they have other means of contact which are free (but are not as effective as a telephone conversation).  If you do the research and read relevant articles, I am sure that you can do.  No, Vista makes it as easy as XP, but it can still be done.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Could not load the Brother printer control panel.

  Could not load the Brother printer control panel.

  I used an all-in-one Brother DCP-J315W for months, Windows 10.  However, in the last week or two, when I opened the icon, I just get a white silhouette of the Panel but no link to 'Sweeping the Image' or 'Scan OCR"etc.

  On a right click on the Panel, I see "not responsible for the animation" and "About Adobe Flash Player 20.0.0.228"

  Anyone have any ideas?  Seen elsewhere?

  I have an answer now, brother.  It is indeed a problem related to the recent update of Adobe.

  If anyone needs to know, you can find it here: -.

  http://support.brother.com/g/b/faqend.aspx?c=eu_ot&lang=en&prod=dcp6690cw_eu_as&faqid=faq0 0100228_000

  Kind regards.

  Geoff H.

• Why Safary does not load the content of pages?

  Why Safary does not load the content of pages? I mean, when I hover over the places where should be the content, he is always showing the "redirect to: [email protected]/" lower left. My Safari is 9.5 and worked fine until Safe Fimder Virus get inside my computer. Mozilla Firefox is a bit slower. If someone could give me an idea on how to deal with it, I would be happy.

  Sorry if my English is not good, I am a Brazilian who is still learning English

  Your English is very good!

  Redirects are usually due to adware or malware.

  Download the run MalwareBytes.

  It of free and takes only a minute or two. Which should remove all adware and malicious software on your Mac.

• Firefox does not load the flash of the Firefox home page

  Firefox does not load the flash of the Firefox home page

  It's not Flash, but a film WebM.

  <video xmlns="http://www.w3.org/1999/xhtml" poster="data:image/png;base64,<base64 data>" src="https://snippets.cdn.mozilla.net/media/files/e29ada39-11f4-4157-ae1c-1340d9455692.webm"></video>

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• 26 of Firefox does not load the home page. Instead, it loads the previous session (and that includes all tabs). It does not matter how Firefox is closed.

  26 of Firefox does not load the home page. Instead, it load the previous session, regardless of what has been entered in 'Options '. The browser runs in Win 7.0 64 bit; Norton Internet Suite 21 provides security features. There are some solutions 'cloud', also running as Google Drive, box, Skydrive and Cubby. The browser behaves in the same way in all my machines (installation and the OS is similar to that described above) and no amount of reset 'Options' seems to affect it. Nor is it affected by the way that Firefox is closed. This is obviously a bug that should be fixed.

  You can check if you have a user.js file in the Firefox profile folder that affects the pref browser.sessionstore.resume_session_once true value.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/about:config

• Firefox is not fully load site Barclaycard of authentication. It load regarding the demand for certain letters in my password but does not load the button 'Submit', so I can't continue with my purchase and I switch to IE8 browser to buy whatever it is ov

  Firefox is not fully load site Barclaycard of authentication. It load regarding the demand for certain letters in my password but does not load the button 'Submit', so I can't continue with my purchase and I switch to IE8 browser to buy anything on the internet. Clues?

  This has happened

  A few times a week

  Is a few weeks ago

  Your UserAgent string in Firefox is totally messed up by another program that you have installed and Barclays does not know you use Firefox 3.6.6 - it is probably similar to IE 6.0 on this site.
  http://en.Wikipedia.org/wiki/USER_AGENT

  type of topic: config in the URL bar and press ENTER.
  If you see the warning, you can confirm that you want to access this page.
  Filter = general.useragent.
  Preferences are "BOLD", a line at a time, and then select reset, right click
  Then restart Firefox

• Satellite A300-288 does not load the operating system

  Hello everyone.

  Today I turned on my laptop A300 and does not load the operating system. In other words, Toshiba logo appears, the message "Press F2 to enter SETUP", but not in continuity with the boot. Yesterday it worked and did not update the BIOS or something else.

  Someone has an idea? I deleted a both SDRAM and vice versa, to check that the problem wasn't RAM, but no. There is no beep. LED touch 'NumLock' and other, power on and off when I have impulses, so the keyboard responding but by pressing F2 or F12 does nothing.

  Thank you very much for your help.

  Start your laptop with F8 and test if you can start the operating system in safe mode.

• When Im in Lightroom 4 and make an edit in photoshop, after Im done making changes in photoshop that I do a backup, but does not load the file to lightroom. This just started happening. It was working before.

  When Im in Lightroom 4 and make an edit in photoshop, after Im done making changes in photoshop that I do a backup, but does not load the file to lightroom. This just started happening. It was working before.

  Please go to the location of your Lightroom Catalog, and there you will see the folder for Lightroom Catalog Previews.Lrdata

• I bought a Canon 70 d. Photoshop CS5 extended does not load the CR2 files. I installed Camera Raw 0.2. Help

  I bought a Canon 70 d. Photoshop CS5 extended does not load the CR2 files. I installed Camera Raw 0.2. Help

  Photoshop CS5 is only compatible with Camera Raw to version 6.7. Photoshop CS5 is is no longer updated by Adobe. The best way to have the latest version of Photoshop is to his scribe for the package of creative photography of cloud. This would have the latest version of Photoshop and Lightroom. You will receive updates of these two programs through the creative cloud.

  If you don't want to upgrade your Photoshop you can download and use the DNG Converter last to create digital copies of (DNG) negatives of your raw images. You would be able to use these files with the software you already have. But you won't receive updates for the software you are currently using. Your new device photo, the 70 d, requires camera Raw 8.2 which is only compatible with Photoshop CS6. Camera Raw 9.2 is only compatible with Photoshop CC 2015, which is only available through the creative cloud. You might want to consider the purchase of 14 Photoshop elements as a complementary program to what you use.

• I installed Acrobat 8 Professional 32-bit version and my computer is 64-bit, the program does not run correctly and I want to uninstall the 32-bit version and re-install the 64-bit version, I can't find the download of US feed for Acrobat 8 Professional,

  I installed Acrobat 8 Professional 32-bit version and my computer is 64-bit, the program does not run correctly and I want to uninstall the 32-bit version and re-install the 64-bit version, I can't find US downloading feed for Acrobat Professional 8, any suggestions

  Hello

  Please see below the link to download: -.

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-8-9-product-downloads.html

• When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file.  I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for

  When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file. I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for these files. What can I do to be free from this error?

  OSstatus = error-37

  Note that this a Mac operating system error.

  http://forums.CreativeCOW.NET/thread/145/865447

  Error when importing the file: slash or other character in file name

  http://forums.Adobe.com/message/3729601

  The build error: slash or other character in file name

  http://forums.CreativeCOW.NET/thread/145/868994

  The build error: complete startup disk

• The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and

  The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and reinstall the software, rebooted a couple of times and tried to activate the download of the Premier Pro via the website, but it still doesn't load in the desktop application.

  This solved the problem for me:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• Does not load the Web page.

  It will not load the web page. It gives an error message or to say that it has expired. The circle on the tab will turn to a stop bit while then just, and nothing comes up. I uninstalled, and re-installed and still gives me this problem. I checked the updates and I am running the latest version.

  I disabled my firewall on my Norton Internet Security and Firefox work again. I activated the firewall back and it still works, go figure.

• Could not load the navigation for subject area? What does this error mean

  When I run the overall consistency check in my RPD. I get this error.
  Could not load the navigation for the business area.
  Source of the dimensional table has no column mapping.
  -What it means and how should I solve this problem?

  Hi friend

  Check if you have correctly joined on LTS (joins between the source tables: facts and dimensions). If you do not have joins on LTS you must create it.

  And also check if the BMML table columns are mapped to the correct table (propierties of each source table and select the tab "column mapping").

  Kind regards.

  Published by: Hammett81 on December 3, 2010 10:10

• HP deskjet 6122 could not load the driver on the CD, he says is no longer supported

  Original title: printer HP Printer driver

  I have an old printer of HP deskjet 6122.  It works very well.

  However, when I plugged in a new desktop computer, I could not load the driver for the CD.  He said that it is more compatible.

  Later, I learned that the driver for HP 990 will work as a substitute.

  When I go to the HP site, there is no help as it attempts to identify my printer before you download the driver.  It identifies my printer 6122 as obsolete and will not load the driver down 6122 or 990.

  Where can I go to download the HP 990 regardless of HP driver?

  It's the HP 990c driver you want?

  If so have you tried selecting the update of Windows while in the Add Printer Wizard?

  It will take more than 5 minutes to get an updated list of printers and the 990c is.

  You can get them here too:

  Drivers HP for Windows update