Printer Spooler not working!

Similar Questions

• print spooler not working-dependencies

  my printer does not work. Inop print spooler service. There were traced back to a dependent service

  Hello

  ·        What is the exact error message?

  ·        You are not able to print using the printer?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  Follow step 1 below to start the spooler service in Windows 7.

  Step 1:

  a. click the Start button and type Services.msc in the start search box and press ENTER.

  b. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. find the print spooler service and right-click on it, and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Step 2:

  a. go to programs and features in Control Panel, and then click turn on turn Windows features on or off

  b. click + sign printing services

  c. Select LPD and LPR. You must remove the Internet printing Client and restart your system to ensure that there is no error in the spooler service.

  d. to re-add your printer driver.

  For more information, see the article mentioned below.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Printer Spooler not working not

  I can't print the printer spooler is not running. I can't add the new printer. LexBce file does not run. How can I fix it?

  I can't print the printer spooler is not running. I can't add the new printer. LexBce file does not run. How can I fix it?

  Click Start, all programs, accessories, command prompt. type the command ff:

  dependent on the spooler of sc config = RPCSS

  related topic:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/print-spooler-error-1068-the-dependency-service-or/399f0ba6-EE10-43B7-A51B-b30bebb56cd9

  Hope this helps,

  Thank you

  Makoi

• Print spooler not working error 1068?

  After Service Pack 3

  Hello

  · What is the number and model of the printer?

  Try the steps listed in the link below and check if it will help: printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  You can also try the steps listed in the link below: you can not print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close": http://support.microsoft.com/kb/810894

• printer is not working, "the print spooler service is disabled" when it is not

  Hello

  I received a message that my pc required for the loading of driver software for a new unknown device, although I had nothing added.

  Now, I find that my printer is not working.

  I tried to accept the "locate and install driver software" message, but it does not work.

  I tried to uninstall the printer driver so that I can reinstall them, but I get a message that the uninstallation was failure because the print spooler service is disabled.

  I checked the print spooler service is set to auto & seems to be on.

  Would appreciate any opinion appropriate for a no no very savvy tech.

  Thank you

  This could be the reason why you do not see the printer in the Control Panel, printers. Try this, go to control panel, printers, if you see the printer listed to remove it. If you don't see the printer, the service could stop, go to services then and click on "Restart the service" (blue link top left), then go back to printing, its listed hopely now and you can remove it (right click). Now try to reinstall the printer.

  If that doesn't work try the system restore, restore to a date when the printer works fine.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Or try the intructions on the link from my previous post. on "how to clean the printer drivers? It is to change the registry, make sure you follow the instructions carefully. Back up the registry, you want to change.
  How to make a backup of the registry in Windows 7, Windows Vista and Windows XP?
  http://WindowsXP.MVPs.org/registry.htm
  Use method 2.

  WARNING: With the help of the Publisher of the registry incorrectly can cause serious problems may require you to reinstall Windows. Microsoft cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use the Publisher of the registry at your own risk.

  How to use the registry editor in Vista and other Techniques
  http://www.Vistax64.com/tutorials/178285-registry-editing.html

  Information in the Windows registry for advanced users
  http://support.Microsoft.com/kb/256986

• Printer Spooler stopped working

  original title: Printer Spooler problem

  How can I fix my printer so I got the message spooler subsystem app stopped working and was closed?

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

• Print spooler not turned on do not, how do I turn it on?

  I did a search print spooler, but when I try to open it with windows search, nothing happens.  Troubleshooting repeatedly tells me that my printer does not work because it is turned off.  I tried to uninstall, but impossible to reinstall without the print spooler on.

  Type services in the start search box, press on enter.

  Go to the bottom of the list of print spooler and click on start.

• I downloaded the new software recently and now my Epsom printer does not work

  iMac late 2009. Processor 3.06 GHz

  Hi, I downloaded the new software recently and now my Epsom printer does not work and my Wi - Fi on the computer keeps dropping out.

  I spoke with Epsom and they recommended to remove the drivers and reinstall them. Now, I can not install the ad pilots Wi - Fi does not work correctly. The research on this forum I see there have been many problems with the new version of the software. Can someone help me?

  < re-titled by host >

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Installed at El Capitan and now HP printer does not work via the network

  Installed at El Capitan and now HP printer does not work via wireless network

  Open system preferences > printers and Scanners and select the print tab.

  Then the right or control click on the HP printer on the left then click: reset the printing system

• my printer does not work well

  MY PRINTER DOES NOT WORK WITH FIREFOX. WHAT DO I DO? THANK U

  https://support.Mozilla.org/en-us/KB/how-print-websites

• Upgrading to OS El Capitan, now my printer is not working

  As above, update OS El Capitan and now my MP500 printer do not work.   I get an error message about the filter (?).  I tried the scanner, it scans, but there is no way to record what I scanned.  I suspect he need a driver more recent or different, but I can't remember how to on this subject.

  Printer and scanner software available for download for your Mac - Apple Support

• My printer does not work on Firefox?

  My printer does not work on Firefox? It works on explore?

  "My printer does not work on Firefox" gives no details on the problem. It is a good starting point:

  • http://KB.mozillazine.org/Problems_printing_web_pages

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox

• changed router photosmart b110 e-all-in-one printer does not work

  changed router photosmart b110 e-all-in-one printer does not work

  Hi aged60,

  I'm sorry to hear that you have linking problems with your Photosmart B110 printer.

  I've included a link to HP Wireless Printing Center Troubleshooting web page.  In the section entitled "your printer was working on the network before and now is not" there are clear instructions to follow when your router has been changed or updated.  If you follow the instructions you should be able to communicate with your printer.

  HP wireless printing Center - Troubleshooting

  http://www.HP.com/global/us/en/wireless/troubleshooting.html

• Canon MX700 printer does not work

  After the update of El Capitan on my iMac, my Canon MX700 printer does not work. UGH!

  Mine has stopped working on Yosemite.  You have an old Mac OS X installed you can test it on?  You can run the test page for the printer itself?  I get the right error messages try to run the printer, and I ended up Canon to accept to sell me a MX922 at a discount.

• finger print scanner not working not

  I have a m6 evny. The strange thing is my scanner finger print does not work on the lock screen, but when I log in using the password, it will work then. Anyone know what is happening?

  FN + ECS should give you information about the product.