printer starts, stops and starts again

Similar Questions

• Different starting point of a stepper motor when vi is stop and run again

  Hello

  I have a vi that will drive and move through the digital output of the DAQ hardware, but now I am facing a problem with it because whenever I have stop the vi and run the starting position is the vi again, what he does not to her but just run again the vi of the last position He is arrested.

  Is there a way to resume from when it is stop and start walking again? The vi I used please advice is attached.

  Thank you

  the reading and by saving it to a file, which is then read to say where the engine was when collapsed would completely stop the program and restart it. Of course, he will have no way of knowing if the position of the motor has been physically changed. Do this to an absolute position encoder, as a previous poster mentioned. Otherwise, to have a "home position" that you can always stop back as a switch of position of origin, or physics.

• Good way to stop and run again a FPGA reference

  Hi guys!

  I have some problems when I try to stop, and then rerun an FPGA vi, I explain.

  I have two DMA FIFO to send data to the FPGA of the CPU and the CPU for the FPGA. When it receives data, the FPGA treats them and sends them to the CPU, and according to the result of the CPU does something. For example, it can be turn on LEDs or to rotate a motor continuous.

  But to do these actions, I have to use a "personality FPGA", i/o pins and LEDs appear to be managed by the FPGA core. So I have to close my reference vi FPGA in charge to receive data from the CPU, make my power on LED and then after raise again my FPGA VI once again, if I don't do LED blink or stay without effect rotation motor... But close and start again the FPGA VI creates problems when running, especially for the previous reading on the FIFO DMA awaiting... I tried to intercept errors on the FIFO to restart the FPGA VI with a good time but nothing... I am lost and I think Miss me something, concept, or something else.

  I can't share my code because I work for a company, but I would like to know if you have VI with this type of structure: a FPGA reference that must be stopped to allow interaction of material with the FPGA default personality then run again, all with good timing...

  I hope I'm clear, but if it is not the case, I can rephrase if necessary.

  Thank you very much for the help!

  Afghow.

  I do not understand why you need to change the bit file is loaded in the FPGA.  Why you cannot add code that handles the inputs/outputs to your FPGA processing?  Why do you still need to send data to the host (CPU)?  Just having the process FPGA data and change the output directly.

• Reference Dell aio 962 printer suddenly stops and flashes "left cartridge incorrect".

  While the printer is working correctly, all of a sudden for no reason apparent stops and flashes "LEFT CARTRIDGE INCORRECTE. All attempts to address this problem have failed. Use the cartridge Dell XL Black series 5. Another cartridge change has no effect.

  Please advise as soon as POSSIBLE.

  Contact Dell, as the printer indicates a kind of hardware failure, it will not be a Windows fix for it.  Go to Dell web and some pilots and support, enter your printer model number and go from there.

• The print spooler stops and I'm unable to start

  I have a HP Officejet Pro L7680 all-in-one that has stopped printing because of the stopped print spooler.  The printer is connected to a local network.  My OS is Windows 7.  I tried Wizard solutions HP that does not help or give answers.  All I get is error 1053 has failed at the beginning or demand for appropriate ion Conytol.  What should I do to start the print spooler?

  To start the spooler go to the start menu and select Control Panel then Tools administration and select Services, and then scroll until you see print spooler. If the spooler is running, then select Restart the service, and then try to print a document.

  Let me know how it goes.

• Hi my printer suddenly stopped and execution runtime error. Question of debugging Microsoft Visual c ++ runtime library. I have reset the drivers but still does not. It's windows vista 32 bit

  Hi, my printer has suddenly stopped.

  Program c:\windows\windows\system32\spoolsv.exe
  c:\windows\windows\system32\spool\drivers\W32X86\3\lxdidatr.dll

  Run the time check failure #3-la variable is 'sinumberofTopic' is used without being defined
  If I try again it said failure of the assertion
  File dmrclibrary.cpp
  Line 415
  Expression: m_hlibModule

  First of all, you can try using system restore if the problem just started happening.

  Go to your Start Menu > Accessories > system tools > system restore.

  Select a point of dated system restore to before the problem started happening and then restore your system at this point. During the system restore, you can restore the configuration of your system and you will not lose any personal data, the system restore affects only your configuration.

  After doing the system restore you don't like something that has changed on your system, you can "undo" the restoration of the system.

  If the system restore is not an option for you, or System Restore does not resolve the problem, you can take the measures put forward in the Microsoft Knowledgebase article below:

  You can also try diagnostics automated web site Windows Fix It:

  http://support.Microsoft.com/GP/printing_problems

  or take the advanced stages described in the following knowledge base article:

  http://support.Microsoft.com/kb/810894

• Online streaming media stops and begins again constantly

  Streaming Audio, music, Radio, video, Web, internet, downloads page display, interrupts, suspend or stop, begins again constantly.

  PC is a wired broadband connection, still running. Speed test: very good. Ping test: very good. It is on a network and the flow of the other PC very well. It's just this paticular PC. Windows Firewall with protection against viruses. I reinstalled Windows and all updates and drivers, with a minimum programs installed thinking that he could solve the problem. Replaced by ethernet cable. Did a scan of the system there is currupt files and windows fixed. I guess that the router, but the other PC is fine. Tried streaming different radios as low as 32 Kbps and always the same problem, I used Itunes, Winamp or Windows Media Player always constantly DAB every 2-3 minutes. Cannot play a song all the way through. I tried download Adobe and it would download 23 MB and then stop all of a sudden really slow or will not accomplish. Another scenario might be that a remote computer sends messeges Ping to my computer somehow what causes these disruptions. What causes these disruptions?

  OK, after reformatting my hard drive, reinstalling windows 3 times, updated several drivers. A couple of hours to do some tests of system, it finally works! What's, was one of the ports on the router did not work properly.

  Thanks for your help.

• then restart the laptop but when installing loading file comes portable stop and start again, then window 7 starts with the non-genuine version

  * O.T. > genuine os

  I real operating system of Windows 7 when I get the window update 10 at that time there I download laptop is restart but when installing password file loading then laptop stop and try again and window 7 is then start with no authentic version what to do to get a license back I know product key unique for this window I don't strip license the back of the laptop or not just any what CD what do I do

  How to: fix Windows 7 or Windows 8.1 active or true reports after cancellation of Windows 10

• Want to 4500 All in One Printer: Envy 4500 and Photo paper

  Recently, I tried to use my 4500 want to print photographs, using HP Premium Plus Photo paper. Each attempted printing resulted in the printer telling me that there is a paper jam. I would open it upwards, remove the paper (which has never been really stuck - just looks like he started getting into the printer and stopped) and try again... Paper jam. I don't have the paper in the tray - went out my plain paper. I am able to print correctly on plain paper, but it won't take photo paper. Any ideas on how to solve this problem?

  Hi @kpdevlin,

  Welcome to the Forums of HP Support!

  I see you are trying to print a picture on your craving 4500 All in One Printer and it keeps blocking. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Looks like there could be a problem with the rolls of paper, print settings, or the paper tray.

  Please work your way through this guide to see if you can solve the problem, a 'Paper jam' error on HP ENVY 4500 e-all-in-one HP Deskjet Ink Advantage e-all-in-one 3540 Printer series.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  You have a photo that you can try to make a copy of, as a test? It would be to help eliminate the printing as the cause.

  Please make sure that the paper type/quality settings are correct, for more information, please see this guide. HP ENVY 4500, printer Deskjet 3540 - change the Mac OS X print settings.

  In addition, if you have access to a Windows computer running Windows 8.1 or earlier, it is an update of the firmware available for your printer. HP Envy 4500 series firmware upgrade to improve the performance of the printer.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• the print spooler stops when I try to print

  Please help me with my printer!

  I tried desperately to install an Epson WorkForce 615 on my computer, running Windows Vista 32-bit. Whenever I try, the print spooler stops and I can't move forward. I restart the print spooler and it stops again with each attempt. I tried every available quantity of advice that I could find online, to go into the registry and delete the files and enter cmd and stopping and restarting the spooler. I don't know what to do... Please help!

  Hello

  Do not forget to check with the support of the manufacturer of the printer, drivers and forums for known issues, because this issue is often
  due to pilot errors.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

• HP pavilion DV6 1030us stop and restart spontaneously

  I bought a HP pavilion DV6 1030us in June 2009, and the Bios has been updated to the latest F24A.

  However, during the laptop running, it will be sunddenly stop stop and try again.

  This unexpected shutdown just looks like all of a sudden power loss and happens at random, at least, I can't find a rule.

  For most cases, this closure comes without blue screen, and it is independent of the operating system.  I tried to install windows 7 64 bit, windows 7 32-bit, vista 64 bit, xp 32-bit, all OS such a problem.

  I don't know if other users with this template has such a problem. I got tired of what I do, still can not solve the problem.

  I suspect that the Bios has a problem. I hope that HP will release a new very soon.

  BTW, if I update the BIOS, it erases the old BIOS completely first, then write in the new?

  Thanks for your attention!

  Hi guys,.

  During the Christmas holidays, I did real progress to find the cause of the problem of restart suddenly.

  I am so anxious to share my experience with you all.

  As I mentioned before, when the first time I sent my laptop for repair, they replaced the hard drive, and nothing improved.

  And the second time, I asked to replace the motherboard.

  Unexpected, the reboot problem remains after changes to the motheboard, I've been very frustrated by such a result, I even thought that maybe this laptop is never fixed.

  Then I started to search the Internet once again and a few posts point to the power supply and one point in the strip of memory, but memory defective barrette syndrome is different. And if my memory went all kind of test without any error, including windows memory diagnostic tool, memtest86 + 4.00 and the diagnostic tool memory in the bios setting.

  in such a situation, I doubt that the power supply has a defect. but I can do nothing with it. I think maybe I make a memory module to avoid the will of power help (I have 2 * 2 GB memory module).

  Unexpected, after that I got a good memory, restart occurred more frequently.

  Then I suddenly realize if this memory module has problem, so I took it and put in another. and with the 2nd memory module, the problem of restart never happens so far.

  To confirm this, I repeated this experience (I'm a sicentist in biology, I know that to reach a conclusion, the result must be reproducible). And this is the case, restart happened frequently with the first memory module and never happens with the 2nd memory module.

  now, I should mention that this module model memory is: MT16HTF25664HY - 800 1. Then, do not lack of HP.

  So if you suddenly have the reboot problem and if you do not find the reason, and even if your memory module has passed the test, you should try to replace it to see what happens.

  If this post helps you solve your problem, pls post your result here to help more people in despair with such a problem.

• Designjet 510: Designjet 510 starts printing, then everything stops and "blocks" no error messages...

  My normally reliable Designjet 510 suddenly started having problems printing: it starts to print my drawings, no problem, but it suddenly stops and just print head 'crashes' and no longer print.  He sometimes starts from the beginning of printing, he sometimes almost at the end of the drawing before it stops, but he can't seem to finish the print job.  The printer does not display an error message, it still shows that it is printing, but no matter how long I leave, it will not at the end of a drawing.   I'm on Microsoft Windows 10 - there was a hiccup when I upgraded Windows, but after reinstalling the printer driver, it seems to work again no problem.  I'm tearing my hair out (and lose large amounts of paper) trying to get anything to print!  Pointers would be welcome.

  Thank you.

  P.S. I posted this problem previously, then thought I had sorted by adjusting the settings of the printer, but she went back, and I am no closer to knowing why!

  How is the printer connected?

• I downloaded an e-mail 11 long pages - printer stopped on Page 5 of the 11 - However, printer keeps printing starting with Page 11 all over again.

  I downloaded an e-mail 11 pages long.  Transmission stopped on Page 5 of the 11 but the printer keeps printing starting with Page 11 all over again.  How can I reprogram the printer to stop printing?

  Hi EileenBrenner,

  See the below Microsoft article and try the steps to cancel or delete the print job, check to see if it helps.

  How to cancel printing or to delete a print job that is stuck in the print queue in Windows XP

  http://support.Microsoft.com/kb/946737

• After installing ElCapitan 10.11.4 on my G5, if I stopped for the night for some reason, the computer starts again sometime between 03:00 and 07:00. Any thoughts?

  After installing ElCapitan 10.11.4 on my G5, if I stopped for the night for some reason, the computer starts again sometime between 03:00 and 07:00. Any thoughts?

  Sounds like an Energy Saver preference, but what computer do you use?  A G5 (PowerPC) machine will not work on El Capitan.

• Satellite L450D - stops and starts again

  Toshiba Satellite L450D
  SER., no. 9442472 K

  Problem. Have a problem with the start. Unable to work, safe mode, safe mode etc. etc. (with the help of F12) or alternative start using (F2)

  Used system recovery disks created with Toshiba recovery Media Creator.

  Now have a never-ending cycle of
  Setup for the 1st use
  Welcome screen
  Please wait
  do not interrupt the closing down.

  Computer stops and the cycle begins again to infinity.

  Please tell us what steps should I take.

  Hello

  The computer really closes or is that only a reboot? The latter I think that everything is ok with your laptop. If you use the Toshiba recovery disc, the computer starts quite often until the installation is complete, this could happen 10 times.

  If your laptop really stops immediately, I think that it s a hardware malfunction and you should contact the nearest authorized service provider. In my view, that the technicians can help you! :)

• How to make a routine traffic stop and start again without restarting labview?

  I am under Labview 6i and kinda a noob.  I have a Subvi designed to take information and write it to a file, but whenever I stop this Subvi it will not start again until I restart the entire VI.  I wish I could start it and stop it, and take multiple readings, because I have to leave the main VI running.  The Subvi is attached.

  The while loop is not passing information because it's still a loop (you wired the ongoing Terminal to a True constant).  No loops on all data transmit until they have finished.

  If you attach your main VI as well so we can help you fix all of them so that they work together.

  Jeremy