printer wireless 3050 j611 guard lose connection

Similar Questions

• Photosmart HP 7520: All wireless network devices will lose connectivity after printing

  Dear all, 
  
      I have a problem with my HP Photosmart 7520 printer where all wireless network devices will lose connectivity after a printer has been sent to the printer.
  
  * Summary
  Wireless network unusable after sending one print to HP printer
  No device ( computers nor smartphones ) can use the Internet nor access internal networks ( 192.168.0/24)
  
  * Details
  Turn HP printer on.  ( wireless direct is off - never turned on )
  HP printer connects to working wireless network.
  Other devices ( phone/computers ) already connected and working.
  From any device, send a document to the printer.
  Printer prints document successfully.
  Immediately after printer has printed all devices cannot access internet IP range ( including HP printer ) nor Internet nor router ( 198.168.0.1 ).
  
  * Reproducibility
  Always
  
  * Work around
  Disconnect all devices from the network.
  Power off printer.
  Reboot Internet router.
  
  * Attempted solutions
  Removed wireless configuration.
  Factory reset.
  Added wireless configuration back.
  Powered on and off printer.
  
  * Printing tested with
  Tested with Macbook10.11/Windows 8/Ubuntu 12/Android 4.4.2
  
  * Not tested
  Ethernet cable directly connected to router.
  
  * Internet Router
  Netgear CG 3700
  

  Number of brand and model of the router?

  These settings are to set up your printer wireless (or wired):

  • Stay connected to your router
  • Trouble printer status 'offline '.
  • Wake mode 'sleep'
  • All wireless devices stay better connected

  While the DHCP is convenient, devices like printers (wired and wireless) should always be assigned a (fixed) IP address manually to avoid conflicts on your wireless network and must be outside the range of the router DHCP.  After the adjustment of the static IP address the computer must be updated to show a Standard TCP/IP port with the IP address of printers under printer properties/Ports.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here and here and still more here.  Video here explains the problem and how to solve the problem. <--> So watch this!
  2. Or check in the printer "Auto Off/sleep/Energy Saving Mode" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check your printer properties.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. Make sure that the printer is connected directly to a socket wall and not to a UPS, power strip or a lightning arrestor. This will cause the printer to drop offline connection and disconnection (checked yes!).

  Additional measures to take if you continue to have the problem (if they are posted)...

• CM1415fnw ctrl panel will not allowing printing wireless (wifi) when you are connected to wired ethernet

  Panel Display control for CM1415fnw says that it will not allow for wireless (WiFi) network card while connected to the wired Ethernet cable.  Was able to get the printer to activate the network WiFi once the Ethernet cable has been disconnected. and there he has disabled the connection once again Ethernet has been reconnected.

  How this printer can be configured to allow both wireless and wired print 802.11?

  Thank you.

  Hi CM1415fnw_help,

  You can't the connected printer Ethernet & Wireless at the same time. The only option is to connect the printer USB & Ethernet or USB & wireless. It is not possible to have two networks connected at the same time. Let me know if you need help.

• Cannot print wireless even if 6510 is connected to my network

  Hello

  I bought a Photosmart 6510 who said I could print wireless and also use AirPrint for my iPhone.

  I am running Windows 7, connected the printer on the network, run a test report which shows that everything is connected, strong signal, IP address, etc.  Everything looks good at this point.

  When I try and add a printer through Windows and her request to connect through the network, I get to the point in the configuration where the IP address is required, but then he says: I can't sign in - cannot find the printer!

  I have downloaded and run the troubleshooter of HP, but in vain.  None of the solutions work.

  I can print when I connect to a USB port, but that defeats the purpose I have to drag the laptop to the printer, plug it, etc... not really what I signed up for!  Also iPhone can't find the printer, even if the phone, laptop computer and the printer are all connected to the network.

  If anyone has the offerings that I'd love to hear from you.

  Thanks in advance.

  Try to disable your firewall temporarily to see if it is the culprit.

• My adapter wireless guard lose connection to my router.

  I have a laptop cq62-423NR running Windows 7 64 bit.  My wireless adapter is a version of the software running Realtek RTL8191SE 2020.7.907.2011.  My router is a station to Air Buffalo WHR-G54S.

  Hello

  You have a few options in my opinion please try these steps can help you solve your problem.

  (1) unplug the battery adaptor & then press on & press and hold the power button for laptop for 30 seconds then switch on and check if the wireless led lights.

  (2) go to Device Manager then uninstall the drivers wireless network card and restart the device and check if the light is on.

  (3) try to do a system restore to the date where unit was working fine.

  (4) Please update the Bios driver & wireless from the HP website.

  (5) click on start search type Recovery Manager, and then click on it once select Yes on user access control, and then select I need immediate help and then select driver and select request recovery driver wireless and install it and then restart the device.

  (6) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

  If you still have the same issue then you need to call HP tech support and get the replaced part.

  Please find links below might be helpful as well.

  The configuration and the problems of Internet connection on a wireless network with Windows 7

  Troubleshoot an Internet connection loss or E-mail on a network (Windows 7) wireless

• Printer wireless to a direct PC connection

  I have a HP Office Jet 6450 all-in-one - wireless.    I've only had problems with the wireless on the first day.  Went through all the checks by the site Web HP, internet has changed business - now I want to just connect my printer directly on my PC when I want to print.    How do I do that?      I can't find my first start disk space, if I had a.  If I need to change it on?

  What operating system?  Download and install the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

  Many times wireless problems are caused by routers at low prices (particularly those issued by Internet service providers).  What router are you using?

• Unable to print to a printer wireless hpB209 on windows 7. connected says HP utility

  I reinstalled the drivers and all retired. I am able to print from other laptops.

  [Moved from comments]

  Hi Dave,.

  The problem can be solved by running the troubleshooting printer.

  Perform the steps from the link below and see if it helps.

  Why can I not print?

  Answer please if you have any questions.

• do not print to the printer wireless network computers connected to wifi

  Don't know if I'm in the right Forum but here goes.  I work in a dealership service department. I have 4 computers connected to our network. I just bought a pro m426fdw mfp laserjet 4 in 1 ad printer connected to our wifi system because there is no available ethernet jack to connect to the main network. Is there a way to allow my 4 computers send information about this printer wireless?

  If you connected to your wireless network, and then run a report of network printer and find the ip address of the wireless connection. If you're in the list use to load the printer using add it printer, the local printer, create a port and the menu drop-down, choose standard tcp/ip and then follow the instructions on the screen. You can also try to load the disc that came with the printer and see if it will find the printer and load it for you.

• I need help setting up eprint on my deskjet 3050 j611

  I have a hp deskjet 3050 j611 and I connected it to my network and can print wireless. When I try to install the eprint it tells me to press the eprint to the printer, and when I do it takes me through the acceptance of the agreements and the automatic update. Then he told me to upgrade to product, I searched for this but found nothing of use, can someone help me?

  Please refer to this topic:

  http://h30434.www3.HP.com/T5/eprint-print-apps-mobile/DeskJet-3050A-3056A-quot-Please-upgrade-product-quot/TD-p/2189269

• How to set up printing wireless Photosmart C8180 All-in-one printer.

  My os is Windows 7 64 bit.

  I want to make my printer wireless.  I had it connected to a USB port and after disconnecting I do not know what com to use.

  The easiest way is to connect your printer to your router with an Ethernet cable.  If this is not possible, you can create a wireless connection to the router.  On the front of the printer: Setup > network > Wireless Setup Wizard.

  Once the printer is connected to your network (wired or wireless, it is indifferent), go to start > Control Panel > printers and delete all instances of the printer.  Next:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get the IP address of the printer on a wireless network Test page, printed on the menu of the network printer.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• HP 3050: HP 3050 print - wireless Mac

  I realize I'm very, very stupid, but need help please!

  I have a HP 3050 for a while now and it's always worked flawlessly with my PC. I just traded on a Mac... and that is the question - I know that my problem lies in the understanding of my Mac!

  I can't work on how to get my Mac to print wireless.

  I added the drivers via a wired / USB connection and it works / prints fine, however, how connect the Macbook Air (Yosemite X) to the wireless printer please?

  My Mac and printer are both connected to the wireless network. I need my old Windows PC to continue to work with the printer also.

  I have the impression that AirPrint do smart stuff, but this isn't for me.

  Any help would be much appreciated.

  Hey @BallBoyUK,

  Thanks for getting back to me. I am very pleased to hear that all the steps worked perfectly for you!

  Now, when it comes to scanning, you should have three methods to scan to the choice. Below I will give you the instructions on how to browse through each method.

  Method: analysis of system preferences:

  1. place the item you want to scan on the scanner glass, or load in the ADF (ADF) documents, if your printer has one.

  2. click on the menu Apple (), then click on System Preferences

  3. click on Print & Scan ().

  4. click on your printer in the left pane.

  5. click on the tab Scan and then click scan open.

  6. click on show details. The details of the scan display, including options to change scanning settings

  

  7 change the settings as needed, and then click Search. Make sure you select the flat or the document feeder mode, depending on your printer and how you plan to scan.

  Second method: Apple Preview Scan:

  1. place the item you want to scan on the scanner glass, or load it into the ADF Document (CAD) If your printer has one.

  2. in the Applications folder or in the Dock, click on Preview

  3. in the Preview of a file menu, select import from a Scanner.

  4. Select your printer in the list. Detail of the display of the scanning.

  5 If a ' software for this device is not installed "message is displayed after you select your printer, click installand follow the instructions to complete the installation.

  6. click view details to view the options and settings of scanning.

  7 change the settings as needed, and then click Search.

  Method 3: Apple Image Capture Scan:

  1. place the item you want to scan on the scanner glass, or load it into the ADF Document (CAD) If your printer has one.

  2. in the Applications folder or in the Dock, click on Capture of Image.

  3 select your printer from the list. If your printer connects to a network, select it in the shared list. Detail of the display of the scanning.

  4 If a ' software for this device is not installed "message is displayed after you select your printer, click installand follow the instructions to complete the installation.

  5. click view details to view the options and settings of scanning.

  6. change the settings if necessary, and then click Search.

  If your scanner does not run through method, please try methods 2 or 3 to see if they fail as well.

  Please reply to this message with the result of your analysis. Happy holidays!

• DeskJet 3050 a 1611 series to print wirelessly on Mac 10.10 yosemite

  How can I get my deskjet 3050 a 1611 printer to print wireless on my Mac 10.10 Yosemite WIRELESS?

  Agustin-Pinales Hello,
  There are two ways that we could get this to work, depending on your configuration. I would ask that you close the other post on the installation that you made so that others can find what was the solution, simply click "accept as a Solution.

  Now on your desktop with the way to wireless configuration. If you have a router that allows the WPS to be pushed, follow these steps.

  Option 1 - connect the printer to the network via the WPS button:
  On the police of the printer control panel
  1. press on the icon Setup - looks like a key
  2. Press 'OK' for 'Wireless '.
  3 use it up or down buttons on the right to select "Wireless Configuration".
  4. Press 'OK' for "Wireless Configuration".
  5 use up or down buttons on the right to select "Wi - Fi Protected Setup.
  6. Press 'OK' for "Wi - Fi Protected Setup.
  7. it will say you have two options, simply press the OK"" button.
  8. Select the 'Push' button for Setup WPS promotion
  9. follow the prompt on the printer press the WPS button on your router
  10. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

  You can follow the same steps above to enter a PIN, just change step 8 for "PIN" and follow the steps.

  At this point, when the printer is connected to your network, you should be able to follow the steps to add new printer

  Option 2 - Connect using the utility (printer installed and connected via USB)

  1. click on the Apple in the left menu bar
  2. click on "System Preferences."
  3. click on «Printers & Scanners»
  4. click on the "HP Deskjet 3050 has" on the left to highlight
  5. click on the button «Options & supplies»
  6. click the button of "Utility" in the upper right
  7. click on the button "Open Printer Utility.
  8. double-click on the icon "Wireless Configuration".
  9. If your Mac is connected wireless, choose Yes, 'keep these settings', then press the continue"" button.
  10. Select 'Allow' If a confirmation is requested
  11. click on 'done '.
  12. close the 'utility '.
  13. click on "OK".
  14. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

  Delete the print queue of the printer HP printer (unplug the USB cable to the printer)
  1. click on System Preferences
  2. click on Printers & Scanners
  3. click on your printer HP to highlight, then click on the "-" symbol below to remove it from the queue
  4. click on the button "Delete printer" to confirm

  Add the HP printer in the print queue
  1. click on the symbol '+' at the bottom left
  2. If a drop down list with the printers menu appears, just click on "Add printer or Scanner..." »
  3 select your printer HP printer or series (depends USB/Ethernet/WLAN connection type, so choose your HP printer with the correct connection, IE Hello for printers single function and Hello to an MFP multifunction)
  4. after the lower filled, click on the drop down menu to "use:" and select your HP printer series
  5. click on the ' Add ' button.

  You can also click on the link below for the other steps, if you need assistance. Or post here your results.

  Mac OS 10.10 Yosemite and HP printer supports

   

• I have a desktop Dell Windows 7, a Windows XP laptop computer and a range of printers HP 3050 has, but I can't get the laptop to Windows XP to print wireless.

  I have a new computer (Windows 7) Dell, a new printer (HP 3050 has) and a laptop with Windows XP.  I can't get my laptop to print.  I installed the software.  Help

  original title: Networking

  You use the HP 3050 has as a wireless printer, or have you connected it to the Windows 7 computer via USB?

  You have a wireless router?  What brand and model?

  Assuming the printer is wireless, what happened when you put the CD in the Windows XP laptop?  Although these printers can be installed manually, it is much easier to let the installer of HP to do.  This is page 3 of the "reference Guide" (emphasis added):

  You can share the printer HP Deskjet with other computers which are also connected to your home network. If the HP Deskjet is already connected to your network home and installed on a computer on the network, for each additional computer you install the HP Deskjet software. During the installation of the software, the software will automatically detect the HP Deskjet printer on the network. Because the HP Deskjet is already connected to your network, there is no need to configure it again when you install the HP Deskjet software on other computers.

  Please describe all the steps you have taken and the symptoms you have.  If you receive error messages, enter them completely, without paraphrasing.

• OfficeJet Pro 8600 all-in-One connected as network printer loses connection

  In December 2011, I bought a HP Officejet Pro 8600 all-in-One to replace an Officejet 6500 as my network printer home. The 6500 worked very well on my cable, but his screen did not, I tried some of the features offered by the 8600 and I got a good price on a new warehouse of BJ. I have the 8600 connected via ethernet (not wireless), with a static IP address. All my computers on the network are running Windows XP Pro SP3 and are up-to-date with Microsoft updates. However, from one day to the next my 8600 will lose connectivity scan (Scan of the computer shows it as being disabled on all my computers at the same time, and I can't reconnect), and if I do not have anything he'll (as in a few hours) also lose connectivity impression. The only way to restore connectivity is to uninstall the HP Officejet Pro 8600 device software basis of all computers, and then reinstall the printer. I had a phone conversation and two debates with HP Technical Support; They suggested that the problem is in the firewall on the computers (but if that were the case I don't think that the loss of connectivity would occur on all computers at the same time), the IP address setting (doesn't make sense) and the printer driver is not not the latest version. I tried all the suggestions, and none of them have solved the problem. The last counselor "has raised the issue to the next level", which proved to be a Manager with no technical expertise and his only suggestion was that I have to return the printer to the merchant. I think the problem is the firmware in the printer (which, according to the 'update' on the printer option, is the latest version). Any other suggestions or experience?

  After a lot of research and find the settings that I did not know that Windows XP offered, I found that the following appear to have solved the problem I've known - at least the printer is now operational for more than 48 hours without losing printing or scan connection. Here are the steps I used:

  1. Start Control Panel  connections network and Internet

  2. Choose "network connections."

  3. Right click on "connect to the Local network.

  4. Choose "Properties".

  5. In the top window is the name of the Ethernet computer connection port, select "Configure" next to this window

  6. Select the tab labeled 'Power Management'

  7. Uncheck the box "allow the computer to turn off this device to save power".

  8. Select the "Advanced" tab

  9. Select the entry "power saving Mode".

  10. If this entry is set to change 'On' to 'Off '.

  11. Select 'OK', and then close the windows that were opened

• Printer wireless HP 7510 goes - 4 station XP wireless network, w / 1 connected PC.

  Printer: HP 7510

  Network: multi-user wireless through the DLink DI-632 (a PC connected to the router)

  Address configuration: printer uses static IP - DHCP (192.168.15.240) outside

  The printer config: each computer has static IP set in the Control Panel app, using the IP address.

  Operating system: XP (Service Pack 3)

  Other devices: Ipad, Xoom and Kindle Fire (work all use ePrint)

  Protocol of network security: WEP (we are out of the country)

  Network configuration: main router, as well as 2 (wired) access ports; currently using channels 1, 5 and 11 (again, we are in the country and have little competition for channels)

  File Sharing: All machines on a network have a player to 'share' open, accessible with passwork.

  Scenario: Wireless computers seem to stay connected for several days to a week at a time. (Restart us every week, just like a POS)

  Computer that is connected to the network loses communication with the printer a couple of times a day and needs to be rebooted in order to re-establish the connection.

  When this happens, other machines continue to print and scan, without any problem and the wired machine continues to have its name displayed in the SCAN on the printer control panel - but the printer won't talk to her.   All network functions, including internet and intranet access to SAP of the printer is always available.  I noticed that if I go in checking ink levels, however, that the ink control software behaves differently.

  Normally in the application of the ink status, there is a small icon of 'work' with 6 points. When this computer is connected properly, it will start to jump around the circle, showing activity, get 41% and then view ink status info.  When connecting the printer and the computer does not work, the icon of 'work' will go to a few percent, then go to the information page printer, showing the brand, model, serial number, etc. level firmware.

  In all cases to date, reboot (without any other action) brings the connection of the printer and the computer to life - until the next time.  I will try to find any other model of this behavior, just cannot identify it again.

  I started with the installation of regular vanilla, but then all the computers on the network would always connections, about every 45 minutes. Using the info on this forum, I eliminated the dropouts for these printers and got static IP solutions (we did this anyway for the years with net lending machines).  It's the last machine which "falls" it seems that some piece of software that are required HP is 'stall' or began to hurt, but I can't see a model, same check and note the different software used locally on the computer and various Web sites visited. So far, no reason.

  I hope the guru of the HP with access to the source for the software status "supply of ink" can take a look at what is happening and why always go to 41% and then view the status of the ink (when connected) and then just stop a few percent and view the status of ink (when it is not connected).

  Thank you, in advance,

  Jim

  Don't know if this can help, some of the information could be relevant:

  http://support.HP.com/us-en/document/c03149924