Printer wireless HP 4500, fax, copier, scanner shows offline
Does not print from the computer controls. Says it is offline. Cannot find where to check it. I have Windows 7.
Hi LindaClark60,
You have downloaded the latest drivers for printer you? Otherwise, I would say by clicking on this link http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1143084&prodTypeId=18972&prodSeriesId=1143083&swLang=8&swEnvOID=228#1130
and download the driver for your version of Windows.
I hope this helps. Just reply to the results.
Tags: Windows
Similar Questions
-
my default printer is an hp psc 1350 but shows offline
Hi I have a sony laptop with windows 7 and used the old hp psc 1350 8 months without problem, but now it is showing offline. I checked all the cables are properly connected, switching off all without success.
Hi BarbWilliams,
· Did you the latest changes on the computer?
Check out the link below on the HP site and check if it helps.
"Printer is off-line" Message appears on the computer and the HP software does not print
-
HP OfficeJet Pro 8500
Series # {information}CM755A model
The printer prints using the printer and the output looks fine. However, when you use scan, copy or fax characteristic of the printer, there is gray stripes dark page that covers almost the entire page. Have tried resetting, cleaning all areas and still have the problem. What is the problem? Is there a diagnosis of the printer that I could run? No error code will appear. Any guidance is appreciated - thank you!
Looking at your attachment, the unit seems to have a bad scanner and must be replaced. If your in the United States, contact the HP support @ 1800-474-6836 to see what alternative options are available
-
4500:4500 printer can work for faxes wireless
My 4500 printer is set up the fax function calls to a wall outlet for a local network without wire-line - I don't have a wall outlet
all my phones have WiFi in the House - 4500 fax can be defined in wireless or not.
I have checked the web and have not found an answer - all I need to know if the fax works wirless
N °
The fax must be connected to an active telephone line with a work phone cable.
See the instructions below to connect the fax:
-
My wireless router does not appear when I shoot to the top of my devices. It shows my fax, modem, scanner and a few others. But not my belkin wireless. And when I try to add it, the system can't find it. Please help
Belkin support for your model, for installation instructions.
Your router will not appear in the devices
-
connect the fax and scanner on HPofficejet 6500 wireless
HP Officejet 6500 wireless. to the PC, a Toshiba. Problems showed up to 4 months, this has been resolved by directly connecting (wired). The printer prints, but the Fax and Scanner are not detected. The machine is an all in one.
Hello
Your printer is a network printer, you are better plugged into the router and configure it with the HP software.
Then use it with the management software provided by HP.
AIO devices aren't devices such as hard drives, DVD, network, etc, they do not adhere to established standards and must be used with the software of the provider.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Can not scan using Savin 8045 All In One printer/copier/scanner
Original title - scanning problems
I connected a Savin 8045 All In One printer/copier/scanner of my Dell Vostro 470 computer via a cat 5 cable and router. It prints wireless and locally but not scan.
Hi TomMargiot,
To provide the proper resolution, I would need more information on your side.
1. which version of the operating system are you using?
2. do you receive any error messages?
I suggest you to uninstall all in a printer\scanner\copier and install it again and check if it helps.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Install a program
http://Windows.Microsoft.com/en-us/Windows7/install-a-programIf the problem persists, I suggest you to contact the Savin Support for assistance.
http://www.Savin.com/global/support.aspx
Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
need to know if there is something I can do for my Mobile Spartan w / Windows XP compatible with my HP photosmart D110 printer/copier/scanner. People have told me that I can download a driver to make it compatible with Windows XP by downloading a driver. Others have said that my computer does not have the ability to be compatible because the printer needs Vista to work. I am really confused about this. I am not very computer but I get. If anyone can help me I would really appreciate it. Thank you
Hello
Wep passphrase is the security of your wireless network, so I can't tell you what it is. However check bottum of your router/modem, most of the time people do not know their code they use standard code that is supplied with the router, and the code is on the bottum router ussualt.
-
Original title: How can I delete copy 3 of my printer wireless?
I have Windows 7 Home Premium 64 - bit and a HP J4680 printer wireless. I have problems printing anything. When I open the device in the Panel, it is called HPFD6327 (HP Officejet J4680). However, when I open the troubleshooter, it refers to the printer as copy 3. I tried to delete copy 3, but he begins to turn upwards and is also one of the choices when I click on 'Print' an application. When I send a print file, it goes to the print queue of the printer, but prints never. I updated the printer HP, uninstalled and reinstalled the printer drivers, cleared out of the queue, turned the printer off tension-and-many times and restarted the computer. I can still print it. I believe that this issue has been raised already, but so far nothing has worked.
Hi Eurotex,
1 have. What problem you tried?
2 did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Method 1: I suggest all the steps mentioned in the article and check if it works.
Why can I not print?
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
Method 2: you can try to resolve directly to the printer.
a. Please click on 'Start', type 'Printers' (without the quotes) and click the displayed item in the results of research.
b. right-click on the active printer, then click 'Properties'.
c. an option named "print directly to the printer. Usually, this option can be found on the page 'Advanced Options'. However, this can vary depending on the printer.
Please open Notepad or Word and check if the printer works correctly now.
You can see the following article for more information:
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Method 3: Disable advanced printing features and check if the problem persists. You can undo changes if you want to later.
a. click the Start button and click on devices and printers.
b. right-click on the printer and select Properties.
(c) on the Advanced tab. Remove the check mark from Advanced printing features.
d. click OK.
Let us know if that helps.
-
Photosmart Premium Fax c309 Series all in one printer Wireless Radio does not work
Some time before, the radio on my Photosmart Premium Fax c309 series wireless all in one printer stops working.
With a wireless network test:
Wireless is on (but light indication only is not lit)
wireless network card has failed
"The wireless radio does not work. Contact Hp support.
Any help would be greatly appreciated!
Thank you
Smithb2
Hi smithb2, welcome to the forums there.
I saw your post on the wireless radio does not not on your model Photosmart C309.
I did some research and came across this post in the community that seemed to have worked for others with the same problem.
Re: Without the printer wireless radio does not
I hope that helps!
If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a great Thursday
-
2840 AIO: aio HP 2840 print white or yellow, fax and copy is in color
The printer prints white or yellow. Fax and copy is without any problem and in color. What can be the François for this dysfunction between fax/copying and printing.
I try to imagine the proper name for it, but this point that does not is the solenoid that engages the carousel in position.
This solenoid holds the stationary carousel while you print to any given color and then frees him then the carousel can turn a quarter turn it is necessary to get to the next color.
What happens is that when the carousel does not lock out of position toner cartridge derivatives and none of the toner transferred to the intermediate transfer belt. Sometimes you get yellow is the first color of the 4 it sets for an image.
What actually happens is the piece of foam rubber that is located between the arms of the solenoid and the solenoid deteriorates and becomes sticky and arm sticks to him instead of the carousel of locking in position.
To fix this you will need to disassemble the machine where you can remove the solenoid and remove the arm from the solenoid, it's pretty simple when you look at it. Then clean the tarry residue and replace it with a very thin pen, you can get them at a dollar store, if you buy the high quality pads they are way too thick and the solenoid valve will not work. You have to have something between the metal arm and the metal Center of the solenoid or the residual magnetism that has developed in the metal causes the two parts together.
You can find the service manual for this machine to: feedroller.com
If my post is solved your problem and click the accepted as button solution under him. In order to thank a technician for a post click the thumbs up button under the post. You can even click on the two buttons.
-
Epson Stylus dx5000 printer/copier/scanner does not print or copy, scan only.
Original title: epson stylus dx5000 printer/copier/scanner
This device is not printing or copying.
This device is only scanning.I continue to be told that the spooler does not work, then stop and restart.Did it many times.Still no results.Epson genuine ink in the printer.Hi Carolina,.
1. What is the operating system installed on your computer?
2. you get any error message?
Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer. To resolve this problem, use the following methods in the order in which they are presented. If method 1 does not resolve your problem, go to the next method.
Please follow the methods and check if it works very well.
Method 1
Follow the steps from the link:Solve printer problems
Method 2
Clear printer spooler files and select the spooler service.
Step 1
a. Click Start, type "Services.msc" (without the quotation marks) in the Open box and click OK.
b. double click on "Printer Spooler" in the Services list.
c. click on stop, and then click OK.
d. Click Start, type "% WINDIR%\system32\spool\printers" in the opened window and delete all the files in this folder.Step 2
You must be logged on as administrator to perform these steps.
a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
c. right-click on Print Spooler serviceand then click Properties.
d. on the general tab, next to startup type, make sure that automatic is selected.
f. e. the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.For all windows questions do not hesitate to contact us and we will be happy to help you.
-
I have a HP 620 laptop computer and a printer OfficeJet 4500 wireless. I can print wireless, but when I go to HP for Solutions to scan a document, it tells me that the printer is disconnected. There is nothing I can do to Solutions of HP to recognize the printer. What causes this problem?
Hello
As OEM HP is responsible for the good operation of the printer and their
drivers provided. Check with HP support, their documentation online and
drivers and ask in their forums.Good luck, you need to update or reinstall the latest driver.
HP - OfficeJet 4500 Wireless - drivers<- set="" to="" your="" version="" of="">->
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=usHP - OfficeJet 4500 Wireless - support and troubleshooting
http://h10025.www1.HP.com/ewfrf/wc/product?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=usHP support/troubleshooting & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/=============================================
The main issue is probably the drivers, but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsOpen the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Copy on a printer wireless HP4620 function
Everything is good with my printer wireless HP 4620... except, when I copy a paper it comes out too big and not is not on one page. Scanning and printing works well, it's the COPY feature... where should I go to the default value of the smaller COPY?
Sorry you had a problem with the copy not copy not full size.
1. press the copy button.
2. press the button (key) tool.
3. then go to resize
4. change to actual size.
-
I AM RUNNING VISTA HOME PREM MY DEVICE MANAGER INDICATES THAT I HAVE AN INTERNAL FAX/VOICE MODEM. I'M SO CONFUSED.
Original title: I DO NOT HAVE A POSER LINE, I CAN SEND and RECEIVE a FAX by USING MY USB CANON PRINTER/FAX/COPIER AND MY INTERNAL VOICE/FAX MODEM WITH MY VERIZON USB MODEM ACCESS to the INTERNET?
The game, July 1, 2010 21:03:19 + 0000, CAPTBARRY wrote:
I AM RUNNING VISTA HOME PREM MY DEVICE MANAGER INDICATES THAT I HAVE AN INTERNAL FAX/VOICE MODEM. I'M SO CONFUSED.
Ouch! Please do not yell at us. We can hear you if you type normally,
in different cases.You have an internal fax/voice modem, but if it is not connected to
a land line, cannot you send/receive faxes like this.Your only choice is to not make use of your machine gun, but to use a web site
service to send faxes for you.Ken Blake
Maybe you are looking for
-
As new synchronization does not work for me, despite the setting it in total compliance with the Mozilla Web site and no one took the trouble to answer the previous post today, is it possible to return to the synchronization of the former?
-
several pages scanned in an output file
I have a 8600 and use the HP scanning software. I want to do multiple scans and include those in an output file. If the media keeps me using the auto feed printer, how can I do this? A scanning software different HP that I had previously used an o
-
Original title: receive in Microsoft Works Spreadsheet click on print, I receive this message. "Out of memory. Save or close any files or applications "Whats wrong?" Same as above
-
There was an error creating a zipped folder - "missing or empty zip file.
I use Windows 7 64 bit and want to Zip to a large number of content items in a foder, about 1200 points, amounting to 800MB. I select items, right click, "send to" and select "compressed (zipped) folder." The process begins and after an indefinite co
-
touchstart event do not work using JavaScript CC animate in IPAD
Events like touchstart, touchstart does not work in the real IPad and chrome Simulation in JavaScript animate CCelement.addEventListener("touchstart", function f2_MouseClickHandler(e) { correctAnswer(e, position, responseId); }.bind(self));