Can not scan using Savin 8045 All In One printer/copier/scanner

Similar Questions

• Can my HP Deskjet 3520 e-all-in-one printer/copier/Scanner "scan to file"?

  All HP printers/copiers/scanners scan so I can create a file on my laptop for what is copied?  I think buying a refurbished, given that all previous HP scanner/copiers/printers worked without problem.  I replaces one that I bought about 9 years ago. Thank you!

  Hello

  Scan and copy are two different functions: to the scan function, you can save scanned images/files to your computer and to copy funtion, it copies and gives you on the discharge papers. Back to your question: Yes, it can create and save files to your computer using the scan function.

  Kind regards.

• Can not install my new HP All In One printer

  Original title: CANNOT INSTALL a PRINTER ALL-IN-ONE COST of HP 5610

  EVRY TIME I TRY TO INSTALL A FRSH HP5610 ALL-IN-ONE PRINTER, I GET THE MESSAGE AFTER

  NO MISSING DLL FILES, SLBCSP, SCCBASE, GPKCSP ENUM I DOWNLOAD AND TRY TO INSTALL NOT NO CHANCE

  See if it helps:

  Error blocks the installation of the HP printer driver: sccbase.dll, slbcsp.dll, gpkcsp.dll and Enum
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-blocking-HP-printer-driver-installation/5c7910a1-1b4b-404F-875e-12e092b07db1

• Using Dell Photo All in One printer 924 with computer Inspiron laptop with Windows 7

  I can't get my Dell Photo All in One Printer 924, to work with my new laptop Inspiron with Windows 7.  I tried the divers and untilities to load the disc that came with the printer (which I have used before with a Dell PC) but the software is not complete loading and I get no explanation.  Go to the Dell site for pilots etc was no help.

  Dell is not win7 driver/software for this model, later are for 32-bit vista

• can not scan using my Mac... frustrated!

  I have HP Photosmart C7180 all-in-one printing. Everything works but the scanner. I got an error message stating: "Sorry, an unknown error has occurred" before I'm gone to the site and downloaded the update to Snow Leopard 10.6.5. After downloading, I get an error message stating: "sorry, scanner could not be initialized (scanner not found). '. I have lost my installation CD to do a complete reinstall. What should I do?

  If you are using Snow Leopard and you have the HP software before Snow Leopard (either from a CD that is not marked as compatible with 10.6 or you recently upgraded to Snow Leopard and had the HP software on your Mac before you upgraded), you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• How do scan you a document from the printer to the computer using a c5180 all-in-one printer

  I try to scan a document to my HP Photosmart C5180 All In One Printer to my computer and like to know what are the steps to do

  Use the HP Solution Center to scan at the printer to the computer.

  HP this documentexplains how to scan with the HP Solution Center. It is very simple to install and use. Mine is configured as a network printer connected to my Linksys router wireless.

• Scan HP PSC 1410 all in one printer works well, does not work with Win XP SP3

  I am well satisfied with my computer HP 2006, Win XP SP3; However when I had to reformat the HP PSC all-in-one printer that works well will analyze any more.  Microsoft says that it does not recognize the drivers for the scanner.

  Try to download software and software updates of the HP Web site.  See if that helps.

• How to send by fax the laptop using the network all-in-one printer

  I have an all in one printer with network connections in my office, how can I send faxes from my laptop

  Your all-in-one printer supports this feature?  Check its manual to see if it does.  Just because it is connected to the network and contains a fax equipment does not necessarily mean you can send a document to him and use the fax to send to someone else.

  'Surace' wrote in the new message: * e-mail address is removed from the privacy... *

  I have an all in one printer with network connections in my office, how can I send faxes from my laptop

• How can I get my HP F380 all-in-one printer scanner, copier control with Vista

  F380 working with Windows xp in all modes, but now it just prints and gives me no control other aspects of the copier of analysis and control, because I loaded Windows Vista.

  Hello

  Follow the steps below and check if it helps.

  Method 1: I suggest you download the drivers from the website of HP support- Driver & Software Downloads - all-in-one printer, HP Deskjet F380.

  Method 2: Run the printer Troubleshooter and then check if that helps.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

• HP Envy 4500 All in one printe: copy problems HP Envy 4500

  The printer works well, but I can't do on my envy of 4500 copies.  When I press the 'Start copy black' or 'Start copy color' nothing happens.  I just replaced two cartridges with HP ink cartridges.  The scanner doesn't work well anymore.

  Hello

  Such a most likely occurs as a result of a problem with the scanning hardware.

  Follow these steps to solve this:

  http://support.HP.com/us-en/document/c00587971

  If the product of the repairs are needed to fill this form to contact HP support, be sure to select your region by clicking on the country of change:

  https://support.HP.com/us-en/contact-HP/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876

  Shlomi

• Can not scan using my Photosmart 2610 Scan button on 10.6 Snow Leopard

  Hello

  Just to avoid any confusion, is not scanning the computer here (from previewing or HPScanPro). I refer to the scanning using the Scan button on my AiO printer.

  HPScanPro has stopped working for me when I installed 10.6.  What I've read, the solution is to scan to Preview.app.

  My problem is that when I press scan on the printer and select my computer in the list - and say then that I select "Tiff to Preview" in the list, it always launches HPScanPro which fails.

  This feature was important to me because I often have to scan lots of pages one after then the other.   Simply push the button on the scanner, then by changing the page and by pressing on the button again allows me my scan in batches and worry then save all files at once thereafter.  This is a great time saver.

  Is there a known workaround solution?

  Just to update my original post, it seems that HP has updated the software for the Photosmart 26xx (2610 here) for Mac OS 10.6.  The software is dated 2009-10-21, but I'm sure it wasn't there until not so long ago.  Anyway, analysis of the scan key on the printer works again and several features appear to have been improved.  There is also a widget dashboard for ink level.

  I am impressed that HP will continue to improve and upgrade their software for a printer that is no longer supported for some years now.  This printer has been a very good experience.

• does not scan the HP 5500 all-in-one. gives message: "install or run the software.

  I have a HP Officejet 5500 all-in-one and an IMac with OS X 10.6.8.

  Never before shot with this HP and this computer.

  When I press scan on the printer button lights a flashing light with the following message: "You Normand to install or run Hp software for feature." In response to this message, I searched on the HP site for the driver software for my printer that match my computr. Downloaded and installed the software, but I still have exactly the same error in the printer.

  The printer is probably more than 5 years. So far I used it only as a fax (hanging on a telephone jack) machine and a machine Fotocopie. I print to a HP Lazerjet printer that has no option analysis.

  Can anyone help? Thank you in advance

  I'm not sure how long it takes, however, here are a few tricks with Capture of Image:

  1. After choosing your scanner on the left side, click "Show details" on the bottom.

  2. on the right side of the screen will be a lot of options, including the location of the format and scanning to file, resolution, and color / B & W.

  3 select the file you want first, then the scan store then the other parameters.  When you have finished changing the settings, click Preview.

• No can not mi more HP Deskjet all-in-One 4315 printed desde otros hence, solo print desde el ordenador al than esta conectada por cable.

  Buenas tardes, tengo cuatro hence y una Patrick en casa. Ellos esta conectado UNO has more por cable y los otros estan por medios inhalambricos online very. Desde estos very're realize the connection, miro imposible to me if needed controllers pero no none appears. Sigo el paso of ir a Panel of Control, printers usually y miro Fax y las printers are instaladas. Mirar the conexion of mi more pero intento no conectarlo can me appears a donde cuadro don't dice that none is you can set the connection. No Hago el problemas Solucionador click nada detecta. He comprobado Los cables esten well connected y paso el cada back por very reliable antivirus, porque me dijo el Técnico could harm por algun virus o hacker than the conexion bloqueando este estar has more o a los drivers. Not se why going asi, el ano pasado instaled las printers y no tuve any problema. Encima in uno los hence desinstale more than I need por cambios deshacer lo, desinstalar y volver a instalar el ordenador para ver algun modo, pero fue peor, porque habia if service Patrick desde ese ordenador no can not. If alguien conoce este problema agradeceria mucho knew ayuda.

  Oh for more information one of the hence are XP, Vista otro y otro 7. El unico computer that works well with the more're UN Windows XP.

  MUCHAS gracias

  Look in the upper right of this window.

  

  Where we see English, click on it and select your language from the list.

  

• Problem with scanning with Laserjet M1212nf all-in-one printer network

  I installed the drivers for my Laserjet M1212nf connected on my computer laptop 64 bit of Windows 7, but it seems like just a printer (in devices and printers). I can't scan from the laptop (I get the error "no TWAIN Device Installed").

  The figure (and work) scan function if I connect to the printer via the USB port and install these drivers, but my laptop does not usually reside in the same room as the printer.

  The scan function installs and runs correctly on a Windows XP desktop computer also connected to my network.

  Hi CW_Enloe

  I will try this tool

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&JumpID=ex_r4155/en/HHO/IPG/easy_wireless/network_diag/&lang=en&softwareitem=MP-96434-1

  If that doesn't help not please inlcude the model of the router you use (be sure that the router is running the latest firmware) which can help was good.

  It can be useful;

  RobertoR