Printers HP LaserJet Pro P1606dn is on but does not print

Similar Questions

• LaserJet Pro P1606dn: LaserJet Pro P1606dn is on but does not print

  I wrote on this forum about a week ago and ShlomiL gave me a solution that worked for a single document, but then stopped working.

  ShlomiL, or someone else, can you tell me how to solve this problem?

  My software is up to date.

  Thank you

  Susan

  It seems you might have a hardware problem. Only suggestion I can give is to try a reset of the printer and if this does not resolve the issue of the cost of repairs to the printer will probably be more it is worth. Here are the instructions for resetting. Ready flashing means light the printer is receiving data and if in fact, you do not have the cable network or usb connected and it still flashes, then it's a hardware problem.

  Service mode functions
  Product resets
  To restore the factory the product's default settings, follow these steps.
  1. turn off the product.
  2. switch on the product and while it is initializing press on and hold the two buttons on the control panel to the same
  time until that all lights blink in unison.

• OfficeJet Pro 276dw MFP receives but does not print faxes

  We see fax incoming page-by-page on the machine, but it does never print.  We can send faxes fine and were able to receive faxes not so long ago.  We crossed on the MFP and the PC settings and everything looks OK.  It's a dedicated fax line.  It will show again received OK when we print a report of the faxes sent/received, but it prints ever.  Thank you.  Here are our current settings:

  

  Updated the software of the printer, re-sat connections and also rebooted the machine and it works now.  Will update if the problem recurs.

• HP Laserjet 1018: Printer light blinks 15 times but does not print

  I have 2 printers, my work horse HP laser jet and a Brother Multi printer/scanner/fax etc. Both printers work correctly when connected (usb to LJ1018 connection) or wireless (Brother MFC) to my notebook running windows 7 lite.

  My desktop HP compaq core 2 duo machine is connected to two printers with the help of a brother network cable and a usb cable for the LJ1018 but I decided to connect the brother wireless to my network, because it allowed me to use my netbook without having to plug in a usb or network cable. I also created my office to connect wireless to the brother and it works fine, but now I find that I can not use the LJ1018 that I think only has a usb cable connection. Although the computer says the printer is connected it is flashing the light several times - about 15 but does not print anything. I tried to reinstall the USB driver but this makes no difference. One thought I have is that Windows XP cannot deal with a wireless connection, but also a connection usb, if yes can I have go back to wired connections?

  Hi @petec48,

  Personally, if it is not broken, do not fix.

• printer is offline but but does not print completely baffled!

  Completely stumped with this. I have a brother MFP990 all in a station. It is connected wireless to my network. I have a laptop computer connected wireless network and it prints fine. My desktop computer, but does not print even if it seems to recognize that it is there. The printer is communicating with my computer and let me know the ink level is low. My scanner works perfectly and scans the computer, no problem. But whenever I try to print, the computer tells me that the printer is offline. I tried to disable Norton firewall, no difference. I tried to uninstall the software, and oddly enough, during the uninstall process, an exceptional print request was printed! When I reinstalled, same problem. Any ideas?

  Hi, Frank,.

  Open the event viewer > application log

  After return that error messages/event ID is related to the question of the printer

  Start > right click on computer

  Select manage

  Select event viewer > application log

  In the meantime, try the following:

  Start > type Services.msc
   
  Press enter
  Scroll down to print spooler
  Right-click on the spooler > select Properties
  Make sure that the Startup Type is set to automatic
  Under the service stop status
  Wait for Windows to stop the printer
   
  Control Panel > open the printer folder
  Right click on the printer icon > select Open
  Do you see the documents listed in the queue for printing?
  Click file > cancel all Documents
   
  Start > right click on computer > select Manage
  Click on continue on window UAC (Vista, Windows 7)
  Select Device Manager
   
  Click on the + sign next to Ieeee... compatible printer
  Right-click on the printer driver and select uninstall
  Click on the + sign next to the imaging device (s)
  Right-click on the printer driver and select uninstall
  Click on the + sign next to printers
  Right-click on the printer driver and select uninstall
  Click on the + sign next to Bus USB controllers
  Right-click on the printer driver and select uninstall
   
  While the printer is turned on, unplug the cable from the rear
  Unplug the cable from the wall outlet
   
  Wait 5 minutes
   
  Plug the cable into the wall jack, and then the back of the printer
  Restart the computer

  Go back, and then restart the print spooler
   
  Go to the manufacturer's website and search for updated drivers

• HP 5400 printer light blinks, but does not print

  HP 5400 printer light blinks, but does not print

  Hello theguttu,

  We will try to uninstall then reinstall the printer in a specific way:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver with the latest version of the Brother's Web site.

  4 reinstall the printer.

  Also, here are some references of printer:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Best regards

  Matthew_Ha

• printer says 'ready', but does not print.

  After changing the ink cart, HP OfficeJet 4500 wireless printer, it says ready, but does not print. I have to align the cart as he said, it print a test page, all in black and white and color (maybe that's the problem, but I have JUST NOW put a nude color cart in). WHATS WRONG PRINTER W / THIS.

  Hello

  You can make a color copy?

  Are receive you error messages about the color cartridge?

• Driver HP LaserJet Pro P1606dn problem? -windows could not load print processor "HP1100PrintProc".

  I have a Windows 2012 R1 Print Server that hosts a network HP LaserJet Pro P1606dn printer (driver version: 5.0.1.57036). Printers are successfully applied by group policy. He has no problem printing, however, when users log on to a server to remote desktop of Windows 2008 R2 and Windows 7 computers, the following error message appears in the system event viewer:

  "Windows has no load HP1100PrintProc print processor because EnumDatatypes has failed." Error code 126. Module: HP1100PrintProc.dll. If please get and install a new version of the driver from the manufacturer (if available) or choose another driver that works with this printing device. »

  Any advice how to solve?

  I used the HP PCL5 universal driver and this has solved the problem.

  61.130.4.12834 worm.

• HP OfficeJet Pro 8600: HP OfficeJet Pro 8600, connected to the local network but does not print a printer on the same LAN

  HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network.

  Work tried fixing it but all attempts fail.

  Firewall disabled.

  Printer recognizes the router's LAN.

  Was also pointed out that the port does not communicate, can not remove it; Cannot add another...

  Printer does not print.

  How can I fix?

  Hi @AnnisMonadjem,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print to your printer HP Officejet Pro 8600. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  When you say 'LAN', are you referring to the network or you try to share the printer on the network?

  How is the printer connected? (Ethernet/WiFi)

  If you have noticed that the port is causing problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  HP has several Officejet Pro 8600 series.

  What is the name and the product number of your printer? How can I find my model number or product number?

  • Update the firmware of the printer.
  • Don't hide the SSID (network name).
  • What type of encryption are you helping? HP recommends WPA and WPA2.
  • You have a double router broadband? Make sure that the two groups were not the same network name.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  • Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.
  • Restart the router, the printer and the computer.
  • Test printing and scanning.

  If the problem persists, download and run this patch rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2

  • Try printing and scanning.

  In addition, if you are still having problems try the steps in this guide, HP printers - "offline" Status Message printer (Windows 7).

  Continue on, if the problem persists.

  Important!   Delete the temporary files and folders by using the disk cleanup utility

  1. Open the disk cleanup utility:

• Color LaserJet Pro 200 M251n: LJ Pro200 M251n not print not some font sizes

  My new printer does not print text to certain sizes of fonts using Word or Publisher 2010. Until 60pt, it's good, but not 72, 100, or 120. However, it will print 240 pt. It will also display these text elements of the pdf document.

  Is this a driver problem? I use PCL6 but cannot find any drivers on the HP site. Do I need UPD PCL 6?

  Hello

  Update the latest firmware for the printer, which should solve this.

  Use the next tool if it is connected with a USB key:

  http://ftp.HP.com/pub/softlib/software13/COL44532/LJ-108129-8/M251_color_Series_FW_Update-20150212.exe

  For a network connection, follow these steps:

  http://support.HP.com/us-en/product/HP-LaserJet-Pro-200-color-printer-M251nw/5097632/model/5097639/document/c03341482

  Kind regards

  Shlomi

• Printer installation problem. Watch is printers and fax machines, but does not print

  I had to move my printers due to a collapse of the motherboard.   I moved my HP DeskJet 710C from a computer (under XP SP3, through LPT1:, where he was part of a network home and works very well) to another computer, also under XP SP3 on the same network, but who doesn't have a printer port.   I replace the cable with a USB printer and I tried to install if via a port USB001 printer.   The machine seems to install the printer (manually - it is not automatically find) and it shows in the printers and Faxes folder.   However, it does not print.   Any document disappears into the other, is not listed as a document to print, but it does not reach the printer.    I did everything I can find listed on the HP web site and run the FixIt program nothing works.   A search for network printers, are looking for a printer, provides a list, of which some are listed as invalid.   I think that I had uninstalled to printers to my computer until I tried to install this printer.   Now, I wonder if these "invalid" entries are mucking up of my installation.   How can I remove 'Invalid printer' names in my list of installed printers.   It seems in any simple way.

  I have my sure others must have had similar problems, but I can't find it on the net.

  Any help would be welcome.

  Thank you

  writing in the new message: * e-mail address is removed from the privacy... *

  Thank you, Tom,.

  I have found no useful HP support. They seem to only want to buy a new printer, but if I can't install my old I'll be able to install a new one? Or > when you think that you download using them, you actually download scanning for the third-party driver software, which has then finds all kinds of driver problems > and wants you to pay to get them replaced or updated.

  This isn't HP; That's the scammers try to sell you anything for an exorbitant price.

  As the computer receives automatic updates from Microsoft and works well otherwise, I do not trust software that detects problems everywhere in my machine. Or am I > stupid? Or is it driver/driver scanner software update that you can trust?

  Most of the pilot sites is not trustworthy. I used Device Doctor and found useful. There no drivers to download IIRC; It just tells you that drivers must update and where to find them. Here is an article on this subject (and no, that Thomas is not me):
  http://mintywhite.com/software-reviews/maintenance-software/device-doctor-totally-free/

  I'm still a little worried about 'Invalid printer' entries in my system network and feel that if I could get rid of them, I could make progress. When I try > print (via USB connection) my wireless network camera flashes with enthusiasm, typical activity out via the wireless network. The file is certainly went > somewhere, because it is more listed as a document to print.

  What printer you put as a default? This should be where the printed document (Word of the device - expected :-)).

  SC Tom

• HP Laserjet M452dn: M452dn Ethernet connected but do not print

  Win10 Pro x 64.

  Printer connects / impressions via USB but not via a direct Ethernet connection or through router.  Connection to printer Ethernet is not but installation disc is located by HP print and Scan by IP addfress doctor. Doctor says software not installed then DLs and installs the software - but still does not print.  Uninstalled and did the all over again: ditto. If again, doctor without uninstalling it (still) says not installed software - although it said it was installed before I ran it again.

  Router/printer Ethernet connection is good (fire port on) and the IP displayed on the printer screen, so I guess that the connection of the cable Ethernet/is OK. Network/print sharing enabled residential group. Utility of Windows/HP ID troubleshooting any problems.

  Something else I could try.

  Thank you

  Monk

  Hello @Hmonk the printer has two ways to be connected but we really recommend use one at a time if you are going to perform a network first installation you want to make sure that you have an IP address from the printer connect the network cable to the printer room will get internet brand of course, on the port on the back of the printer when you have connected cable has a green and the orange light and then go to the menu reports on the printer and print a configuration report right on the 1st page under product settings, you will find IPV4 you must subsequently make the installation at this time where everything you want to make sure, is that the IP address of its different then 0.0.0.0 or 169.254.XXX.XXX since these combinations indicates that the printer its does not properly connect to the network

• Printer HP 8600 Ok, but does not print anything

  I have tried everything I can thingk of. My HP8600 (Wi FI) pro works very well, the PC says it's all Ok, no problem, but I cannot print anything (it was working perfectly a few days ago).

  It can scan from the printer to a computer predefined shared directory without any problems, but the PC does not print anything, even not the computer test page and nnthing present in the queue either.

  I ping the printer without problem!

  I have reinstlalled the pilot tiimes much, at no. avail etc...

  problem remains the same, says there is a configuration problem, I'm lost.

  In computers, it says after the installation, but the icon of the image is the kind of an empty rectangle, not the picture of the printer itself.

  Hope you can help. Maybe I'll try to destroy the driver and load it again, it's the last thing I can think.

  Hello

  Since you've already tried to uninstall - reinstall the driver of your printer, we recommend that you use Microsoft solution easy solutions. Please download the troubleshooter to solve problems with the devices and printers , and follow the steps on thislink.

  Let us know how things.

• My designjet 430 printer shows ready but does not print troble shoot shows like loan

  I have a ploter deigns jet 430 I have not used for about a year, but I does not print. I got a new computer I put new ink printer it shows ready but I do not print or make noise but on my computer it shows as conspire, I hope someone can help

  Your first point of contact should be forums of HP.  Here you will find specific knowledge on HP printers.

• printer prints from the internet but does not print the document files

  My photosmart Hp 6510 series prints from the internet, but do not print documents saved in my Toshiba computer files. He did print before files. What should I do? This message has been incorrectly marked as the solution

  Are you connected via USB or you print wirelessly?

  I've included a few scareen shots below the best way to go about printing a word document. The icon of the file clicked at the top left, click on print and follow the screenshots below.

  Make sure the printer name is identical to the one that you want to print to. older printers may appear in the window also so do of course have chosen the right one.