printers usb & WRT610N

Similar Questions

• Cannot print with printers USB XP

  I tried 4 different usb printers on my computer and none of them works. Windows detects the fine and installs all the drivers. But at the end it says that there is a problem cause the specified port is unknown. I finally contacted the printer company and they said it s only a problem with my computer cause it is no virtual usb port listed to select. How can I create a virtual USB port on the computer? I have all the drivers installed and functional usb including support of the usb printer. And they all say it works very well.

  some ideas here

  :en-GB:IE-SearchBox&ie=UTF-8&oe=UTF-8&sourceid=ie7&rlz=1I7GGLT_en&redir_esc=&EI=M4mXTdf4MoaAhQe30vX-ca http://www.Google.co.UK/search?q=problems+with+USB+printers&RLS=com.Microsoft

• Will be device drivers (printers, USB Hubs, router, wireless, etc.. wired routers) who currently works for Windows 2 K and XP (SP3) on Windows 7 Home Premium 64 bit?

  Old devices connect to computers with Windows 7 home premium 64-bit.

  Hi Eventers,

  Thank you for visiting Microsoft Answers.

  Access the link mentioned to check if your hardware is compatible with Windows7 below:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  You can also download and run the Windows 7 Upgrade Advisor to see if your computer is ready for Windows 7. It scans your hardware, devices, programs for known compatibility issues installed, you gives advice on how to fix any problems found and recommends what to do before upgrade you.

  Visit this link to download the Windows Upgrade Advisor:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15&displaylang=en

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WRT610N with HD on port USB + WD TV Live on the network

  Hello

  Since the WD TV Live, I can share everything and I can see it on the net. I can see on the port USB WRT610N of WD TV live HD, but I can't, I don't see the files. Is access, no username and PSW is required when trying to get into the HD media server, any required access data.

  Anty help? Thank you

  Well, the problem has been resolved. Now, you can browse WD to the HD router with any problem. Therefore, the settings on the working document that was required.

• use the usb connection or wireless connection?

  I have windows 7 64 bit.  My printer is Photosmart all-in-one model D8110a.  It came with an antenna for the wireless connection. I can't find a place to screw the antnna in. I have a modem to work with band wifi.  Once I've set up wireless can I use my usb on my desktop connection.  I have desktop and I have a mini I - pad. I would like to print from my I - pad and my office.  I do no network, just personal crochet patterns, recipes, etc. Any help would be greatly appreciated.  Thanks, MissPiggie

  MissPiggie

  Hello

  I did some tests about 18 months back to connect printers, USB connection or wireless at the same time with a few computers (only 1 connected via USB) and the tests worked. I can't find the model of your printer, so I can't say more.

  Kind regards.

• USB device to the virtual machine to auto-reconnect

  Hello

  I have two printers USB connected to my ESXi host, but when the esxi host restarts and usb devices are disabled are not reconnected when the USB turns.

  Is there a solution for this?

  With sincere friendships.

  Low van den Dikkenberg.

  Hello

  Welcome to the communities.

  Don't you installed vmware tools and followed below kb

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1648

• PC won't turn on after that heating is triggered off the coast

  I knew better than that, but was cold and could not get any other energy sources in the room.

  Connected to my HP Pavilion all-in-One (Windows 7), include I - couple additional HDs, 2 printers (because my wireless HP printer jam printer again and made a clicking noise when you send something to print, but it won't pull the paper but I will post only under printers), USB hub and speakers and the Sub.

  Switching on of all this is two small regular bands and a 450va Fellows Battery Back Up Power, that power more fellows to strip something happened and the Stoppers on the work on one side. : (

  Last night it was cold so I went and got a little radiator and not be able to access another electric taken in the room, I plugged it in one of the smaller bands that had the outputs more available. The Unit carried out an hour or two and everything seemed fine.

  When I got up to walk out of the room, I fell a little more of the heater and it farm and therefore part of the office, but I can see a printer is turned on. I just checked the heating on another outlet and it works fine.

  I checked all power strips and smaller Exchange, one of the oldest with a little again, bit a wider power seems to come from all power strips. I know I need to check each of them with a little to make sure they really are producting power, just not a light on for some reason any.

  But the Bureau not power anything. I just read something where it says to unplug the PC and leave that he unplugged for a minute, then after a minute hold button power/start on the PC for 30 seconds, then plug the backend to see if it works. HE HAS NOTHING. I read, where he said it was supposed to take care of any problems with the 'crowbar' in the power circuit, and I don't even know if it is compared to my computer.

  I'll pay more with swapping power supplied and plug things on them, but other suggestions would be much APPRECIATED!

  ONLY connect the computer & monitor in one outlet. Bypass all these power cascading several bands. Then perform the tests appropriate to the device. Here's a general tutorial.

• LaserJet4 more: Windows 10 driver for HP printer

  My printer LaserJet4 Plus worked fine on Windows 8. However, when I upgraded to Windows 10, the printer is not recognized. What can I do now?

  The solution worked. However, when you get to step 6 'use an existing Port', I selected 2 USB because my PC has all ports USB 2. The printer has not received the documents for printing. There was an error message which I don't remember. As my LaserJet 4 Plus printer is almost twenty years old, I changed the selected port USB 1. The printer worked fine. I guess for the old and almost obsolete printers USB 1 could be recognizable option.

• Blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

  I have my Acer 5920 laptop, 2 GB of RAM and 160 hard drive, last stop system time correctly with all the files to day, but when I restart then comes windows XP Jean-Christophe and then a blue screen with the error. Nor I have install new software or remove something in the laptop. My system was perfect, and that was before the last stop.
  I have Windows XP SP2-teacher-pack. I have the original CD of this package.
  But when I use the CD then nothing is happen and come same messgae of error. I do not have any other CD bootable for windowXP except your originalCD.
  Please suggest me what I should do to fix my probem. I'm not to much expert for the formatting and other things computer.

  After reading your following suggession:
  Here are a few things to try:
  The first thing to do is to boot your system and start pressing F8 as soon as it starts booting.  You will get the Windows startup options screen.  Select "Disable automatic restart in the event of system failure" and let it restart.  When it starts, it can now stop with an error screen and give an error message and code.

  Disconnect all external devices (printers, USB Hub, drives external, etc.) and try to start.

  I got the result of the error that comes on a blue screen after you follow your process-blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

  Thanks in advance for help
  What about nice Rajneesh

  Just one quick response for others...

  Go to your bios to change the mode of training of your s - ata AHCI or IDE Compatible mode or all that apply :) Windows XP is not like SATA, because it has no native support for it. At the start of the second phase of a Setup program, it would fail with this BSOD.

  Also read the following Microsoft article that describes many other causes (including file system damage):Troubleshooting of errors "Stop 0x0000007B" in Windows XP Advanced

  Sometimes, your BIOS will provide its default settings after a system crash or a configuration. Should not happen, but it is...

  For BIOS-discussions, see: 0x0000007B 0xBA4cf524 - Forum of Support PC - Free Computer help , XP installation: * STOP: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000)? - Page 4 - Cyber Tech Help Support Forums , 0x0000007B (0xBA4CF524 - Google zoeken .)

  Have fun, and... Peace!

  Devvie

  ~ ~ ~ * E-mail address is removed from the privacy * ~ ~ ~

  CONARE nullius momenti videri fortasse missilibus careant
  ------
  All the spelling mistakes are my own and may not be distributed under the GNU General Public License! -(© 95 1 by Coredump; 2-10 by DevNullius)

• computer does not start after power surge get to message x 300 128 MB BIOS

  I had a power surge of the House with the computer when I restarted I got a black screen with a 300 x is 128 MB bios p/n 113-a33406-100

  under that top left, a blinking cursor try don't reboot with pf8 no help

  Hello

  ·         What is the brand and model of the computer?

  ·         What is the last splash screen that is displayed, until you get the error message?

  ·         Were there recent changes made on the computer before the show?

  Please give us more information on this. Also, disconnect any external devices (printers, USB Hub, drives external, etc.) and try to start.

  Error-PC x 300 and 128 MB BIOS p/n 113-A33406-100 is linked to the Dell computer. If so, I suggest you to contact the Support Dell about this issue and check. You may experience this problem if the BIOS is damaged.

• IM the administrator of my computer but can't seem to access my account have to use children account, because I have this blue screen, cant even log on to safe mode? How can I solve this problem?

  can't get into my accont blue screen, peuvent ' t do it on safe mode, so I have no administrative privledges, how can I solve this problem? Help

  Hello

  1. What is the exact error message you get with the blue screen?

  Follow these steps and check if the problem persists.

  Step 1:

  Remove all external devices such as printers, USB drives and check if the problem persists.

  Step 2:

  Check if you are able to start in "last known good configuration".

  How to start your computer by using last good known Windows XP Configuration
  http://support.Microsoft.com/kb/307852

• XP does not start! UNMOUNTABLE_BOOT_VOLUME. STOP: 0X000000ED

  When I start my Vaio laptop, I get a screen that tells me that Windows did not start successfully and gives me boot options (safe mode, etc.). I tried all the options with the same results: the Windows logo appears for about 5 seconds, then I get a blue screen for a fraction of a second, not long enough to read the error message, then the process starts all over again, again and again! I have not any hardware or software recently added. I followed these instructions for an answer to the same exact situation. (The first thing to do is to unplug all devices (printers, USB Hub, drives external, etc.) and try to start.  If this does not help your system and startup startup then pressing F8 as soon as it begins to start.  You will get the Windows startup options screen.  Select "Disable automatic restart in the event of system failure" and let restart.) I have nothing plugged into the laptop never and have not installed all the software on this subject recently. I get the error code is UNMOUNTABLE_BOOT_VOLUME. STOP: 0X000000ED (0X8733D030, 0X00000000, 0XC000009C, 0X00000000). Please advise me on what to do next. I have cruelly laptop! Thank you!

  Hi Paras,

  You can check if this article helps.

  When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".

• Windows XP blue screen at startup

  When I start my Compaq V2000 laptop, I get a screen that tells me that Windows did not start successfully and gives me boot options (safe mode, etc.). I tried all the options with the same results: the Windows logo appears for about 5 seconds, then I get a blue screen for a fraction of a second, not long enough to read the error message, then the process starts all over again, again and again! I have not any hardware or software recently added. I install XP Service Pack 3 about three weeks before this problem started.
  I need help!
  News of the computer:
  Compaq V 2000
  AMD Sempron 1.8 Ghz
  768 MB of Ram

  okiepostal,
  Thanks for posting on the Microsoft answers Forum.  The first thing to do is to unplug all devices (printers, USB Hub, drives external, etc.) and try to start.  If this does not help your system and startup startup then pressing F8 as soon as it begins to start.  You will get the Windows startup options screen.  Select "Disable automatic restart in the event of system failure" and let it restart.  When it starts, it should now stop with an error screen and give an error message and code.  Post back with the error information.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows xp does not start after the system restore

  Hi, a few days ago, I restored the system to my computer because it showed no hard disks that have been added to the computer. I had no problem before, so I restored the system to the same day. AGTER system restore, my computer would not start. Well, it's not to the point where I'm supposed to pick a user, but instead of a list of users, it shows 'windows xp' on a blue background. I turned the computer off tension and Trier to start in "safe mode", but it did not help. What should I do? Thank you.

  Hello

  Follow these steps and check if they help.

  Step 1:

  Remove all external devices such as printers, USB and then try to start.

  Step 2:

  I suggest that you perform the installation of repair XP on your computer and check if that helps.

  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx

  Note: Make sure you have uninstalled the latest version of Internet Explorer if installed before to perform the repair facility.

  Reference:

  http://support.Microsoft.com/kb/917964

• I have a blue screen I can't start and I don't have a boot disk I can't start in safe or any type of mode

  I have a blue screen I can't start and I don't have a boot disk I can't start in safe or any type of mode

  ccorr,
  Thanks for posting on the Microsoft answers Forum.  You will need to provide additional information.

  What version of Windows and service pack level are you?
  Do you get any error messages?
  If something has changed on your system prior to this issue (hardware or software)?
  What "Startup disk" do you have?  It is the manufacturer of PC?

  Here are a few things to try:
  The first thing to do is to boot your system and start pressing F8 as soon as it starts booting.  You will get the Windows startup options screen.  Select "Disable automatic restart in the event of system failure" and let it restart.  When it starts, it can now stop with an error screen and give an error message and code.

  Disconnect all external devices (printers, USB Hub, drives external, etc.) and try to start.

  Post back with the error information and results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.