Vista with SP1 and the updates. Freezer and blue screens periodically

Similar Questions

• Satellite M40X-169 when it is connected to the wireless device stop with restarts and blue screen

  Hello.

  I had the problem with my laptop when I connect and get connected to the wireless network. My laptop stops with the Blue error screen, then restarts.

  Maybe you can help me solve this problem, because I can't work normally when I need to be connected.

  Plaese help me.

  Hello

  It is not easy to give you a precise answer, but try to remove WLAN card from Device Manager, and then restart the device. You can also check the Toshiba download page and try to install the latest driver for the WLAN card.

• I had windows 7 x 64 enterprise installed on my HARD drive. now the company win 7 has expired, and I have to install win vista with sp1, but got a 0 x 80070017,.

  I can't format my HARD drive, but during a test partition, _X, who was only 26 MB in size of about was some sort created and vista tried to install instead of the main partition, partition (_: X) was created several times not by me, as I was using full disc for my installation. What's wrong?  fries, HARD drive, or win vista DVD fried, or win vista with sp1 wont install on a hard drive that had win 7 on it before formatting HDD and clean install that? Help? also, I got an error code 0 x 80070017.

  Hello

  1. When this error occurs during the installation?

  2. you have the Vista installation disc or the service pack disc?

  Method 1:

  I suggest you try the steps in the following article from Microsoft to install Windows Vista on your computer and check if it helps.

  Installation and reinstallation of Windows Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  For more information, see the following Microsoft article to know the system requirements to install Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements

  Method 2:

  I would also refer to a similar thread with a possible fix:

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/6749eaaf-6a40-4ED3-b5e2-8cb134cd1e39

  Hope the information is useful.

• Re: Can't do and blue screen with the recovery tool

  Hello

  After I start my computer, leaving the office, but I can't do anything, everything freezes!

  I tried the recovery (with F8) tool and it starts, but after a while the bluescreen apears.

  Can someone tell me what is the problem?

  Thank you

  Hey,.

  What laptop, you have exactly and blue screen appears exactly?

  If disk HARD recovery doesn't work you should try the Toshiba Recovery disk recovery facility.

• Computer hung over the Windows, restarted, update now it does not start even with the installation CD, Get blue screen with the stop message.

  Hi, I installed a Windows update when my computer froze, so I turned it off and back on, now I can't even boot to the installtion disk supplied with the computer. When I hit F8 reapeatedly and select one of the available options, the computer contiually restarts and will not even go into safe mode. I tried hitting ctrl-alt-del, which brings me just for the system configuration menu. I even tried a software that is supposed to start any computer with any problem, and I get the same results I get with the installation CD. (Blue screen with error message: STOP 0x0000c1F5 (0x00000000, four times).) I can't do anything with it, can you help me!

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly understand exactly what happened when you tried this update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• HP elite e9160f had compatible windows error/process stop notice and blue screen freezes.

  HP e9160f Vista Home Premium running is compatible notice of error switch Windows and blue screen freezes.  Any suggestions?

  I went ahead and ran the HP disks to reset to the factory settings and loaded Windows 7.  No problems now!  Thank you for your help and persistence.

• With regard to the update of the locations of cards-oracle

  HII everyone,

  In my application, we using mapviewer, which was installed locally on our server, for map rendering and showing the locations of a client like pinball machines.

  Suppose that some places (address, City) is updated map... How mapviewer (which has been installed on our server locally) will update this site all in rendering...

  Thank you

  learner

  It depends on how you got the map features.  Mapfeatures are usually stored in the cache.  If a change in database may not appear in the card immediately.  If, however, given the characteristics of the map as a vectorlayer, then simple vector update updates map.  You should consider two options with regard to the update database process.  You can store the geometry as a function that is updated on the fly as change attributes of database, or you may use a database trigger to update the geometry when the attributes change.  Thus, using a combination of correct space architecture and mapviewer correct functions.

• Anyone having problems with guides since the update?

  Anyone having problems with guides since the update?

  My guides are everywhere, since I updated my Illustrator last week. The guides are solid lines while they should be dotted (as defined in my preferences) when I'm zoomed out... and then disappear or become dotted but moved when I Zoom.

  It's so frustrating! I can't work like this!

  All the solutions out there?

  Thank you

  lyncylox,

  You can try to disable the GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU; You may also uncheck performance GPU in your preferences.

  I think that the issue should be fixed with the 19.0.1 patch.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

• Satellite C660 and blue screen

  Hey,.

  So after trying to install the bios update v 1.30 in the toshiba bulletin board blue screen appears for only a second, and then the computer restarts after you restart it asks "Unexpected Windows shut down, searching for solutions" additional info:

  Issue name: blue screen
  Version of the OS - 6.1.7600.2.0.0.768.3
  ID of locale - 3081

  BCCode - e4
  BCP1 - 00000001
  BCP2 - 8AB1FCA8
  BCP3 - 00000000
  BCP4 - 00000000

  OS version - 6_1_7600
  Service Pack - _0_0
  Product - 768_1

  Files
  C:\windows\minidump\060111-31590-01.dmp
  C:\users\teejays\appdata\local\temp\wer-68936-0.SysData.XML

  ADWARE TRACKING COOKIE.

  any advice with this problem would be appreciated muchly.
  Thank you, Oliver.

  Stand by.
  You can start your laptop properly?
  You can use the preinstalled operating system?

  Blue screen appears when you try to update the BIOS only?

• Adding RAM causes freeze or blue screen. RAM works well with Win XP

  I upgraded from Win XP to Win 7.  I had problems with the installation so I removed all non-essential equipment and was able to complete the installation.  When I add more RAM, I had emoved (two DIMMs of 512 MB) to the current 1 GB DIMM, Win 7 either freezes or I get a blue screen after boot up (it does not boot up to the desktop computer).  Even RAM works very well with my old XP OS (I did a disk clone before moving to Win 7).  The card motherboard BIOS is up to date (according to eSupport) and DIMMs are the same characteristics (a 1 GB DIMM and two 512 MB DIMMS for a total of 2 GB).  Windows 7 works very well with just the 1 GB DIMM in memory 1 of 3 location, but any combination of causes freeze or blue screen.  Is there something on the way Windows 7 manages RAM which is causing the problem?  If so, is there something I can do to solve the problem?

  try running Memtest86 +, which runs from a floppy disk or CD and should eliminate or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours, so no errors at that time then your ram is OK.
  http://www.memtest.org/

• Satellite A500 - crackling sounds and blue screen

  Hey everybody.

  I bought a laptop Toshiba Satellite A500-19w about 4 days ago (today it is Sunday, March 7, 2010).

  I had the sounds of crackling of my speakers which have been mentioned so many times in the forums, no real solution.
  I also experienced the crash of the blue screen, that's already happened 7 times while I was not strongly using my newly buy laptop.
  I'm not looking for a repair or a replacement, because I find it quite unacceptable to have to think about the errors, faults & fixes as much as the laptop is brand new.

  What I want is a refund, but I'm not sure on how to do it.

  I know that Toshiba has some sort of refund policy, but if someone can tell me exactly how it works, because I want to get rid of my laptop as soon as possible (I will not buy any more portable Toshiba, especially since I had some similar problems with my Qosmio f30).
  If someone can give me some guidance, because I don't want to be mocked or used and cheated out of refund.
  I bought my Toshiba in the Middle East (perhaps refund policies are different here).
  Thank you.

  Post edited by: mihran

  Hi mihran.

  If you want to pay off your laptop, you should talk with your computer store where you bought it. Only the can repay your laptop and not Toshiba directly.
  Of course it is also depending on the country where you life, but normally you can pay within 14 days I think. So in your case I speak with the seller or give them a call. They explain how to do this.

  But let me give you a little advice: regarding your problems with the crackling sound and blue screen I recommend that you contact an authorized service provider or ask a new A500 (this should be possible if you have only 4 days). Generally, I can say that a friend of mine has Satellite A500 and he is quite satisfied with her. This laptop has a great design equipped with new material for a good price. :)

• Cannot install windows - MEMORY_MANAGEMENT exception and blue screen

  Hello

  IM unable to install windows on my laptop computer, because whenever I try to install it, after installation there is exception MEMORY_MANAGEMENT and blue screen. It all started since a few exceptions on my previous windows which gives began several exceptions like DRIVER_IRQL_NOT_LESS_OR_EQUAL as errors and PC rebooted each time. Then I thought to install new windows and the problem started. I'll be very grateful if you look forward to my problem

  Thanks :)

  First run Memtest86 +:

  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  (1) If you do not know your readers make / model number AND your computer is no longer able to load Windows:
  (a) Renmove the drive of your desktop and check the label for the serial number and model.
  (b) remove the bottom cover of your laptop, remove the disc and check the label for the serial number and model.

  (2) If Windows is still usable, install 'Speccy', it provides information of the computer/system in detail on your:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test drive - create a Bootable CD:
  (or connect the drive to anther PC and install the appropriate test software)

  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.

  List the factory utilities, walk.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital disks, download the file .iso from WdDiag:
  http://support.wdc.com/product/download.asp?GroupId=613&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also try Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  = Test SSD - modified software: 24/10/14 =.

  Intel® drive SSD Toolbox
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Corsair SSD Toolbox:
  http://www.Corsair.com/en-us/blog/2013/may/the-Corsair-SSD-Toolbox

  Toolbox of Kingston:
  http://www.Kingston.com/us/support/technical/sandforce_ssd_toolbox.aspx

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  PNY support: http://www.pny.com/support/contact-us

  Samsung: http://www.samsung.com/global/business/semiconductor/minisite/SSD/global/html/about/whitepaper07.html
  Samsung Magican review:
  http://www.TweakTown.com/articles/5638/Samsung-magician-4-2-first-look-new-SSD-Toolkit-adds-rapid-mode/index.html

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  Seagate: http://www.seagate.com/support/internal-hard-drives/laptop-hard-drives/laptop-600-ssd/

  Life of the SSD: http://ssd-life.com/

  J W Stuart: http://www.pagestart.com

• How can I fix freezes/crashes/blue screens

  I can't understand how to prevent my laptop freeze suddenly and 'blue screen '. I have to turn off and restart. This happens more often. I have an urgent need for a solution to end this mess.

  Thank you

  Stan

  Hello

  If you have freezing and screens, chances are your event log is blue will say it is caused by a driver. So what I've done since I've had trouble finding this driver it was and that is to install, I downloaded SlimDrivers free on this site: http://download.cnet.com/SlimDrivers-Free/3000-18513_4-75279940.html
  It is an open source freeware driver updater that really works and I used it and so far no crashes.
  Computers are supposed to make things easier then why labor minidumps and scouring the internet for drivers when you can get a program to do it for you with a few clicks of the mouse.
  Good luck

• Why my screen freezes or blue screen appears in normal mode but not safe modes?

  My monitor quivers at the start and in security mode. PC freezes or blue screen during normal mode but not in safe mode.

  Hello

  If it works, fine, safe mode, start your computer in a clean boot State to eliminate conflicts of third party software and check if the problem persists.

  Note: Follow step 7 to your computer as usual.

  In addition, follow the steps in this article.

  Resolve stop (blue screen) error in Windows 7

• Satellite Pro L500 - press Fn key blocks the laptop computer to blue screen

  Hi all
  First post so please ask if I did not include all the necessary information.

  I have the Satellite Pro L500-1TX (Win 7 32 bit os) and everything worked fine including the Fn menu drop-down button.

  Now, whenever I press the Fn key, it blocks the laptop to a blue screen. The computer then restarts automatically and that it was an unplanned shutdown offers the usual safe mode option.

  Unfortunately, I do not know when this started as I do not use the fn often hesitate so just do a system restore. I don't know how far back to go. It was several weeks before I associated accidents hit the Fn key.

  Any suggestions as to which Toshiba drivers may need to be reinstalled. The computer otherwise works fine.

  Cheers in advance
  MTV

  Great! Thanks for this feedback that I also found other threads about Support Flash Card utility and it is the tool command keys FN so read the forum in other threads contributes without doubt! ;)