Printing for HPOfficejet 4500 G510a-f device

Similar Questions

• OfficeJet 4500 G510a: problems to print to HP Officejet 4500 G510a

  Hello.  I have a printer HP Officejet 4500 G510a, connected to a pc Windows 7 Dell.  I serve these together for a long time, including yesterday.  Today, it was as if the pc could not 'see' the printer.  I hit the print command, and nothing would happen.  No print jobs showed in the queue.  I re-installed the printer, re-downloaded and installed the driver printer and checked the cable.  After all this, I get a different message.  After hitting the print command, the work shows in the print queue, but with an error (no error code).  Nothing prints.  I had visitors in the home for the holidays, which could use the pc in the course of the past 24 hours, even though I doubt any of them would have done something fundamental for the parameters.  Advice would be appreciated; Thank you.

  Hello! Welcome to the @RedRaven forums

  I read your post on how you can no longer print to your Officejet 4500 G510a. I have some ideas for you, that might help!

  First make a copy of the printer, it is a hardware test to see if the printer is correct. If it copies, it's a great sign. Please let me know the results.

  On the computer, run the print and Scan of the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results. Please let me know these results as well and even include a page if possible.

  You mentioned that you have checked the cable. You connect the printer with a USB or Ethernet cable?

  I hope to hear from you, have a nice day

• Example: HP Officejet 4500: plug printer for Mac OSX Mini 10.10.2 HP

  Apparently, I have to get my printer HP Officejet 4500 connected to the Mac Mini OSX 10.10.2. HP advises that I already have the correct drivers? I am confused.

  Hey @KateMC1,

  Welcome to the Forum from HP Support.

  I understand that you're looking to connect desktop HP Officejet 4500 all-in-One Printer to your Mac Mini.  I would like to help.

  I have a HP article that details the installation process for this OS version combination printer.  Click on the following heading:

  HP printers - installing a printer driver Mac using Apple Software Update

  Perform all the steps in this article.  This can be completed the configuration of your printer.

  Please let me know the result of your troubleshooting by responding to this post.  If these suggestions resulted in a functional configuration, feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below.

  Have a great weekend!

• HP Deskjet 4500 G510a Officejet - printer unplug the HP Solution Center screen

  Hello

  I have a HP Deskjet 4500 G510a Officejet and I am running Windows XP 7.  Just recently when I press print, a FACSIMILE screen from the HP Solution Center and I can not print from this screen either.  I set up the FAX Solution Center and it's works well but I don't know how to solve the problem that I am having with my printer.

  Any help would be greatly appreciated.  Thanks in advance.

  I'm sorry you have a problem with the printer and the solution Center.

  Try uninstalling and reinstalling the software and drivers.

  It seems that communication has become a problem between the computer and the printer.

  Let me know if it helps.

• Problem installing printer, can't seem to get the driver for my printer HP Officejet 4500 G510n-z

  Can't seem to get the driver for my printer HP Officejet 4500 G510n-z... error message is displayed when using the floppy... same error message when trying to install it directly from the HP website for downloads but will not be installed, then uninstall everything... crossed suggested all the patches that were sent as responses to the problem... .very frustrated... somebody please help!  I heard maybe Windows 7 (have the Pro version) may need to be reinstalled... don't really want to go there...

  Error code:

  Error Code of Situation: 17669436

  + 00000000000000042819584 | s | Now Launching = X:\hpzpr|40.exe - inf m

  "preload_productdrivers - I XXX f"X:\hpwins28.dat"- no validation of the.

  -Validate the No.

  SetupINFsListedInDatFile failed with fatal error during installation.

  exit code = 1603

  Do'nt listen to what you have heard - re reinstall

  Its caused by a program or a service that runs on your PC and can be exasipated if you have utilities maintenance party installed, usually called "optimizers" and prevents installation

  Clean, start your PC, http://support.microsoft.com/kb/331796 then try the installer complete on hp site.

  See also to support HP;

  Click 'Start', type in the search field and click 'OK ':

  msiexec /Unregister

  Then follow these steps to temporarily remove all unwanted processes to the system startup:

  «Click 'Start', and type msconfig in the search box-> click on the 'start'-> click on 'Disable All' now-> click on the 'Services' tab-> click on "all Microsoft Services show"-> click on ' disable all '-> click on ' apply 'and' OK '-> you restart PC-> after the restart, it is a request-> confirm you set the hook and click OK.»

  You can activate the process later in the same way (after successful installation of the software).

  Now again click 'Start', type in the search field and click 'OK ':

  msiexec / regserver

  Now launch your attempt to re-setup.

• the printer for printing for iPad e code

  Hi everyone, I hope you can help me.

  Im not sure same as that the right edge to post. I have questions about the devices Mac, Apple devices. They are Android?

  My HP ENVY 4500 E printer works fine on my MacBook Pro. It works wirelessly with no problems. I got the printer set up by a guy help remotely, I called on 06 may, when I google in charge so that I could actually have a conversation with someone on the way to do. It turns out want money from me rip off stuff. But he received the printer works. The problem is that I have no idea what he was doing. He took the control remote for a while. I never had to use the disk of the box.

  Now I would e print from my iPad and iPhone 6. I think that the code of the printer that was in the box with my printer is no longer valid.

  I tried the forum here, looked different answers, but none of them seem to work for me.  How can I start?

  I installed the app on my iPad and keep clicking on 'Activate' but no email comes to my e-mail with a code.

  Thank you.

  Hey @Bracelet,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I understand that you plan to print from your iOS (iPhone, iPad) devices with ePrint your HP ENVY 4500 e-all-in-one printer.  I want to help you with this.  I have some friendly suggestions that might help.

  Before addressing the issues technical, here are two resources contact legitimate HP , that you can use when you want a more direct support from HP.  Beware of imitators not HP because they are responsible for the exorbitant fees for services that you can get free from HP.  If you have a hardware problem with your printer, I recommend that join you our technical support team. You can click on the following link to start a business: www.hp.com/contacthp/

  Note that once you complete the form online to build your business, you can choose among different ways to contact direct.

  In the future if you encounter a problem (related to printing from cell phones, tablets, scan to e-mail, Instant HP ink) clouds, you can still freely call our Cloud Services to 855-785-2777. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  When the printer was you first Setup on the MacBook Pro, it is likely that its software has been installed on the HP website (for reference).  If you're wondering what Android is, like iOS (Apple), it's a mobile device (mobile phones, tablets) operating system.

  Now, answer your main question, here how activate ePrint:

  You can print using ePrint service of HP, either by directly send print jobs to the address @hpeprint.com your printer or via the application of HP ePrint.  Here's how to fill out your installation ePrint for both of the above methods:

  • If you have a Wi - Fi connection, tap the icon of webservices/ePrint on the front of your printer.
  • Enable Web services and press OK to allow your printer to update automatically.
  • If you are interested, you can click here to get instructions on how to create a custom address ePrint.

  If you have enabled Web services successfully, you can start to transfer the content that you want to print (emails, documents, photos) by e-mail at the address @hpeprint.com your printer. Are one of the ways to simplify the process by adding the address of your printer @hpeprint.com to the book of list of contacts/address of your iPad so that you don't have to manually enter the address whenever you want to send a printing job.

  If you are looking for more options, particularly with the print content of email, iCloud or photos, click here to install the HP ePrint app.  Once you activate the application with your personal email address, you will find that this is the most complete printing method when you use an iPad.  Just like the ePrint via method email, proximity to your printer to the iPad doesn't is more a factor in the impression.  As long as your iPad has an internet connection and you have left your printer on or in standby mode, you can send it ePrint jobs from virtually anywhere.

  Please reply to this message with details or questions, if you experience any problems during the finalization of the configuration of one of the methods suggested impression that I presented above.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• HP Office Jet 4500 g510a-f: issue of Scanner

  I have a Hp Office Jet 4500 g510a-f all-in-one. When I scan a document, it saves it as a jpg. How can I get to save in pdf format? I don't have this option available to me.

  @talented,

  Thank you got the quick answer. How did you install the software and drivers for your JO 4500?

  To start, I suggest below:

  1. Hold down the Windows Logo key on the keyboard and the 'R' to open the dialog box run, type % temp %

  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted

  3. Uninstall the software again - uninstall the printer software Instructions

  4. Once the uninstall is complete, reboot the computer

  5. Follow these steps to reset the registry settings and options for Windows Installer.

  • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run

  • In the Open box, type

    msiexec /Unregister

    and then click OK.

  • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run

  • In the Open box, type

    msiexec/regserver

    then click OK

  * Note: there is a space between the c and the /.

  If you do not at this stage, use this link to perform another way. Restart Windows install

  1. Run the system Accessories\ tool disk cleanup <> How to delete files using disk cleanup

  2. Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplaye r/downloads.html

  3. Perform a clean boot > How to perform a boot in Windows

  4. Download file SP40669 according to download - if this download and or install, please proceed to the next step.

  5. Disable real-time scanning and the firewalls; The image below is an example of McAfee, if you have another antivirus program and need help to disable the analysis in real-time and firewall let me know.

  

  - Image source

  Now you can go ahead and download and install the software by clicking here >HP Officejet Full Feature Software and Driver

  Follow the on-screen instructions. What are the results?

  Let me know the results. If this resolves the problem please let others know to mark this message as "accept as Solution".  To simply say thank you, click the "Thumbs up" below!   If you need more assistance let me know and I will gladly do everything I can to help.

• OfficeJet 4500 G510a-f all-in-one

  I'm running Windows7 and my printer is a HP Officejet 4500 G510a-f. When I turn on the printer carriage slams printer side repeatedly and when it stops my screen says there is a paper jam, but there is none. I went through the troubleshooting solutions, nothing helps. Someone knows how to fix this?

  Hi michaelk24,

  Thanks for the reply!

   

  At this point, I think it's a hardware problem with the printer that we will not be able to resolve through troubleshooting. I suggest that you call HP Technical Support for your area and inquire about trade and trade program.

  I hope you have a great weekend!

• Cannot install the printer HP officejet 4500 Windows 7

  Original title: HP officejet 4500 printer is not able to install successfully on windows 7 64 bit ver

  Good day to all,

  I have a printer above that connects port router thro is not able to install successfuuly using portable computers that are running windows 7 64 bit ver, uninstalled hp program and delele registry still same.i have try vista laptop with a utp cable from office windows xp and laptop wireless with the computer it works fine. Pls help and your promt response is very much appreciated.

  Moved from Vista devices and drivers Forum.

  Hi Benoit,.

  Good day to you and thank you for posting your query in Microsoft Community.

  I understand that you are unable to install the printer on Windows 7. I'll be happy to help you with your query. However, let me ask you a few questions;

  1. What happens when you try to install the printer?
  2. You receive an error message? If Yes, what is the exact full error message?
  3. You try to install the printer for the first time to Windows 7?
  4. Remember to make no change in the computer before the show, if it was installed before?
  5. What is the brand and model of the computer?
  6. You are able to install the printer to Windows 7 via USB cable? If not, what happens when you connect the printer (via USB) to Windows 7?

  There could be various reasons that you can not install the printer. There could be a possibility if you try to connected the printer for the first time, you need the printer software. If it has been installed in the past, it could be any conflict of third party software. Let's try the methods below and check.

  Method 1: Download and install the latest software of the printer from the printer manufacturer's website and check.

  Enter the exact model and series type the following link and install the printer software.

  Driver downloads &

  Method 2: There are several ways to connect a printer to your computer. An option that you choose depends on the device itself, and whether you're at home or at the office.

  Please see: install a printer

  Method 3: If the printer has been installed in the past, perform the clean boot in order to avoid any conflict of third party software and check.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  From now on, try the methods above and let us know the result as well as the answers to the questions. We will be happy to help you further.

• OfficeJet 5746: Why my printer does not record twice in devices and printers (direction)?

  My HP Officejet 5743 presents itself as the default printer.  Also the appearance is HP649F6A (series HP Officejet 5740).  Why it appears twice with different BOMs?  Will it affect anything if I remove it?

  Hi @Metal1,

  Thanks for joining the Forums of HP Support with your request.

  I understand that you use a HP Officejet 5743 e-all-in-one printer with a Windows 10 PC and printer appears twice in the file devices and printers in Windows, with slightly different names. I would like to help with that.

  I was looking into this and found that there is a solution, concerning Direct eventually picked up by your PC if directly on wireless wireless signal the printer is 'On '.  Try the post with the answer of the @vthapa by clicking here.

  Please let me know if that solves the problem, or if you need assistance.

• How to change the DPI for Officejet 4500 Wireless settings

  Printer: HP Officejet 4500 G510n wireless (CN547A)

  OS: Windows 7 64-bit

  My DPI settings seem to be too high.  I'm scanning a single page and the file is 21MB in size.  I can't find how to reduce the dpi.

  Is it possible to do it on this device?

  Thank you.

  Hi zulwe,

  You can adjust the DPI and PPI parameters depending on the program you are using. Because you are using Windows as your operating system, you can have this printer Officejet HP solutions Center. Check this box: scanning with HP Solution Center software in Windows

  And no, we cannot do this on the device. It can only be done through your computer.

• Scanning/printing with envy 4500 problem

  We had our combo printer for about 6 months... we had a problem with the printing of our laptop computer after you install the software. When you try to print, the dialog box shows the printer is offline, but it's not. We also have the software installed on our desktop. My question is, we are limited to a single computer for this printer and not both? If so, this is not cool. I have run diagnostics and just, it will not help. I uninstalled the software from the laptop and reinstalled. It worked today, but now I can not scan from my office. What is the problem?

  Jack

  Hi @radiowizard,

  Welcome to the HP Forums!

  I see that your HP Envy 4500 printer is indicating that it is in offline mode. According to another post, you run that Windows 7 is that correct? I'm happy to help you with this problem of connection!

  This printer has USB connection or wireless connectivity options. If you wireless you can print with several computers, if computer USB and then one at a time.

  Please consult this guide, "Printer is off-line" Message appears on the computer and the printer does not print: Windows 7.

  Hope this guide clears things up for you and have a wonderful day!

• When I try to scan with my CanoScan N640P ex scanner I receive a message indicating the Port to the printer that is used by another device. How can I work around this problem?

  When I try to scan with my CanoScan N640P ex scanner I receive a message indicating the Port to the printer that is used by another device.  How can I work around this problem?

  Hi ejp70,

  1. did you of recent changes on the computer?

  2. to when was the last time the scanner was working fine?

  3. you have any other printer\scanner connected to the computer?

  If you have any other printer\scanner connected to the computer, disconnect them and check if it works.

  I suggest that you uninstall and reinstall the scanner to the computer, also make sure that you install the latest drivers for scanner on Canon website.

• Cards to print on HP 4500

  I have a HP Envy 4500 and cannot print on a map. He keeps jammed in the printer.

  Hello there @sandyxx ,

  Welcome to the forums

  I read about how your want 4500 is having difficulties of printing on a map, and I want to offer my help.

  Here are the supported card types and sizes for the 4500 want to specifications. Make sure that you use one of these:

  

  If you use a supported card, and the card still blocked, try the following steps:

  A "Paper jam" error on the HP ENVY 4500 e-all-in-one and series printer e-all-in-one HP Deskjet Ink Advantage 3540

  Let me know the results!

  Have a great Tuesday

• Why not my printer HP Officejet 4500 Desktop working?

  For some reason any my printer (HP Officejet 4500 Desktop) won't copy... only puts them on a blankscreen... it has always worked before and I've done all the troubleshooting tips, "Mr.Fix - it ', etc... Anyone know what could be the issue... when I did the troubleshooting, the display shows no abnormalities.

  Have you contacted HP?

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/OfficeJet-4500-won-t-copy/TD-p/1244283

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/my-OfficeJet-4500-does-not-copy-anymore/TD-p/872431

  http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---G5/3919445/model/3919447/document/c02073861/