printing from an attachment

Similar Questions

• Printing from Palm Pre

  Announcement 'Happy Baby' shows print from a Palm Pre for a printer, but the site has no indication of what is required (next to a HP x).  There is a link to the website of Palm (now owned by HP), but nothing on this site.

  Can someone explain.

  ePrint work on a Palm Pre, like any other connected device internet.  Add an attachment to an e-mail message addressed to your HP printer connected to the Web and press send.  For more information or how to find the email address of your printer connected to the Web, please see HP ePrintCenteror ePrint FAQ.

• Printing from iPhone

  When I first set up my HP 5510 he printed PC and iPhone. Now I find that I can't print from iPhone (4 s). Tried emailing photo to the printer, but it was rejected as spam. Any suggestions? I would use the print function of the iPhone more than on PC. Regular e-mail doesn't print or the other.
  
  Thank you.

  Hello Mimi_64,

  As for printing on the iPhone's on-board printing function, there are a few steps, you could try to see if they are able to solve your problem.

  1 clear print jobs from the print queue on your device iOS by tapping twice on the home button. The Print Center should appear at the bottom of the screen. Select Print Center and clear print jobs by sliding your finger across each task and select "delete" until no more jobs are listed.

  2. after clearing the print queue of the printer, you have to completely turn off your iPhone by pressing and now the power button on the top right of the camera until see you "Swipe to turn off" and slide on the screen to completely turn off the iPhone. Do not feed the iPhone on yet.

  3. If the printer is still lit, disconnect the power cord from the printer, leave it unplugged for 30 seconds, then reconnect the power cord to the printer. Once connected to the printer should automatically turn on.

  4. once the printer is back on, you can return - turn on the iPhone and try to send a picture or an email for printing test and see if this solves the problem.

  As for sending emails to print from your iPhone, please make sure that:

  (a) there is a single address in the ' to: ' field (printers email address)

  (b) remove any signature you defined to attach at the bottom of each email (for example, "sent from my iPhone")

  Now, you can try to send an email from your iPhone and see if it will print correctly and not responded with enamel "rejected as SPAM.

  If you have any other questions do not hesitate to reply to this message and I'll try to help you further.

• Office Jet 6700 Premium: unable to print from 6700 JO unless I wake up

  Hello

  The appellant here desperate because I cannot solve this ongoing problem.

  System set up:

  Office Office

  HP Office Jet 6700 premium

  Wire in a BT Home Hub

  Laptop HP EVO, running wireless

  Problem:

  I can no longer print the laptop wireless. I need to go to my office and print something. Then only the printer seems to be "awake", and then I can print from the laptop. As you can imagine this is not how it is supposed to be and this causes a lot of frustration.

  The printer is also set for a static IP address (it was to solve other printing problems ). I also checked the firmware, and it is up to date.

  Please tell us how to solve this problem.

  Thanking you in advance

  Wolfgang

  Hi @Klee66,

  Welcome to the Forums of HP Support!

  I understand that your HP Office Jet 6700 Premium do not wake up when you print on it, unless you wake up before hand. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  There could be many reasons why this is happening, so please bear with me.

  I see what your printer firmware is up to date, which is good.

  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Please try Fix It tool of Microsofts, solve printer problems.

  You do not share the printer from the computer desktop you have in sharing files and printing? Otherwise, this could cause part of the problem.

  Do you turn the printer power on and off?

  I can't see what your printer is connected to the BT Hub with an ethernet cable.

  It is possible that the laptop is connected to the printer cannot communicate on the 5.0 GHz network. If they are of the same name that will be confusing.

  Have you tried to configure the wireless and no cable connection on the printer to see if it makes a difference?

  How old is the router, have you also checked to see if the router firmware is up-to-date?

  Is the router dual-band? Two networks are the same SSID for 2.4 GHz and 5.0 GHz? If so, change the SSID to 5.0 GHz to a different name and restart all devices.

  What router do you have to BT?

  I suggest you read this article by BT, I have problems of connection of 5 GHz and features dual band wireless BT Home Hub 4 or 5 Hub.

  I see that you have setup a static IP address. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  While in SAP, open the network tab, and then select IPv4.

  Set the manual DNS on the printer.

  • Set the primary DNS as 8.8.8.8
  • And the secondary DNS as 8.8.4.4

  I would like to try the steps in this guide, HP printers - printer (Windows 8) "offline" Status Message.

  If the problem persists, please see these links or contact BT

  BT.com BT Home Hub 5 Product Details - link

  http://BT.custhelp.com/app/answers/detail/A_ID/46549/kW/how%20do%20i%20Change%20The%20Power%20save%2...

  BT.com link - saving on the BT Home Hub 4 and 5 of Hub

  http://BT.custhelp.com/app/answers/detail/A_ID/43669/c/346/session/L2F2LzEvdGltZS8xMzg2NzczMzgzL3NpZ...

  BT.com link - what is the function of Smart Wireless BT Home Hub 3 and Hub 4 Hub5?

  http://BT.custhelp.com/app/answers/detail/A_ID/32235/kW/how%20do%20i%20Change%20The%20Power%20save%2...

  BT.com - contact us

  https://bt.custhelp.com/app/contact#h=eyJzdGVwMCI6ImNvbnRhY3RJdGVtTGluazU2MjciLCJzdGVwSWR4IjowfQ...

  I hope this helps. Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Deskjet D2660 printer: unable to print from your PC Windows 10 using printer HP Deskjet D2660 shared connected to Windows 7 PC

  Hello

  I have two PC Marge and Homer connected through a NetGear router:

  Margin: A Windows 7 32 bit laptop computer with an HP Deskjet D2660 printer and one scanner HP Scanjet 2400 attached to it. All these devices work perfectly well.

  Homer: 10 64 bit Windows desktop without devices.

  The two computers share their photos, music, videos and documents folders and printers via a homegroup. However, although Homer can see the printer connected to the margin, if I try to print anything from Homer, it fails. To give an example of this, if I print from 2013 word on Homer, the dialog box is shown below:

  

  

  At other times, on Homer, the item to be printed appears in the print queue, spool but then disappear. Moreover, I am aware of the problems of HP driver causing the elements to disappear with the disappearance of print queues in Windows.

  All the HP diagnostic software I tried did not detect the printer, perhaps because it is an older model.

  Can someone advise?

  Thank you

  Martin O'Shea.

  For the Dissapperaing of print job in the queue. Please follow the path below.

  Step: 1 Goto C drive--> Windows System32-->--> coil--> printers (right click and click Properties).

  Step: 2. under printer properties. Click the Security tab.

  Step: 3 Under Group or user name-> click on each one, then click on modify.

  Click on allow on all the paramaters (Permission) and then click on apply and then click ok.

  Step: 4 reboot the system and unplug the power cable from the printer without pressing the power button on the printer.

  Problem should be solved, it's usually because that computer allocates the permission for printing.

  I hope that this should take care of the concern.

• Impossible to only print from message WORD get no installed printer

  I have AM UNABLE to PRINT IN WORD - GET MESSAGE "NO PRINTERS INSTALLED" - AM ABLE to PRINT FROM WORDPAD, EXCEL AND INTERNET.  Help!

  In general, you should ask questions related to the word in the Word forum: http://answers.microsoft.com/en-us/office/forum/word

  Before you do so, however, it may help: http://support.microsoft.com/kb/223418 are most likely parts of this article apply to your situation:

  Set a different default printer and set your original as a default printer.

  If you do not have a second printer installed, install the 'generic - text only' default printer and then set your normal printer back to the default value:

  1. Click Start , click Printers and faxes.
  2. Under printing tasks, click Add a printer, and then click Next.
  3. Click local printer attached to this computer, and then click Next.
  4. In the use the following port box, select LPT1: (recommended Printer Port), and then click Next.
  5. In the manufacturers list, click generic.
  6. In the Printers list, click on generic / text-only, and then click Next.
  7. Check the name of the printer, and then click Next.
  8. Click do not share this printer, and then click Next.
  9. Click No when you are prompted with the question whether you want to print a test page, and then click Finish.

  To change the default printer and the new driver, follow these steps:

  1. In the Printers window, click generic / text only printer (or your other existing printer), and then click set as default.
  2. Right-click your original printer and then click set as default.
  3. Try printing again.

• OfficeJet 5741: e-mail does not completely print from the laptop, but the fact of the iPhone

  My e-mail does not print correctly from my laptop, but made my iPhone. Some pages don't print at all; a few cuts partial printing of pages at random. I have not had this problem with my Officejet 6500 Series. That's happened?

  Hi @edzoocator,

  Welcome to the Forums of HP Support!

  I understand that printing from your e-mail account to your HP Officejet 5741 printer does not work properly. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you are able to print from your iPhone, but impression of your Windows computer 8.1 gives you problems. There could be a problem with the driver of printing or the application you are printing from.

  To check if you are using the correct printer driver, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing. What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  • Please try printing from another application to help isolate the problem.
  • Do you use a local web or e-mail client application-based e-mail account?

  There could be a problem with the Web browser you are using.

  • If you use a test of email based on web printing from other browsers such as Safari, FireFox or Google Chrome.

  To solve the problem with the problems causing the internet browser, follow these steps:

  Reset your Safari browser settings:

  1. Open your Safari web browser by clicking on the Safari icon in the dock.
  2. Click on Safari from the Safari menu, located at the top of your screen.
  3. A drop-down menu will appear. Choose Reset Safari....
  4. A dialogue warning now appears listing the components that will be removed.
  5. Click the button in the dialog box titled reset to complete the process.
  6. Your Safari browser will now restart automatically.

  Source

  Reset the settings of your Firefox browser:

  1. Type of topic: config in the address bar and press ENTER. A list of preferences.
  2. Find the print.print_printer preference (Note: this preference is missing in Firefox profiles where you have never used the printer.)
  3. Right-click (context-click) this preference and select reset. (Some users may have to reset all the preferences of print.printer for a particular printer, if this master preference reset does not solve the problem.)
  4. Restart Firefox and see if the problem is resolved.

  Source

  Reset your Google Chrome browser settings:

  1. In the upper right corner of the browser window, click on the menu of the Chrome Chrome
  2. Select settings.
  3. At the bottom, click Show advanced settings.
  4. Under the section "Reset settings", click on reset.
  5. In the dialog box that appears, click Reset.

  Source

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• laser jet pro M127fw MFP: printer will not print from the computer

  printer works fine until I printed out a spec sheet. 35 a customer through an attachment page.

  now, the does not print from the computer. Everything else works fine. (copy, scan, fax)

  Internet works.  Reset the factory setting on the printer. Everything seems fine on the computer, but when I hit print

  nothing happens.

  Hi @kartman,

  Welcome to the HP forums!

  I read your post on how you can not print with your printer HP Laserjet MFP M127fw, on Windows Vista pro. I'm happy to help you with this printing problem!

  How is the printer connected? Ethernet or USB?

  In the meantime, please try our HP print and Scan Doctorand let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope to hear from you soon and thank you for posting!

• m276n: print from a mobile device using a wired connection on the printer

  Hello

  I am considering buying the printer m276n for use in the home. I have a small Home Office on the top floor of my house which is out of range of my wifi signal but has a wired connection to the same router that broadcasts the wifi signal. I want to put the printer and connect it via a wired connection to the network. I know that it works perfectly for all windows home computers that are attached to the same network (wired and wireless), as long as I give you a fixed IP address to the printer.

  But since we use mobile devices more and more (apple and android) it will be a nice to have to print those as well. I watched Eprint Airprint movies, but all tell me that the printer must be connected wireless. Is it a necessity or my proposed wired installation will work just as well?

  Hi @MartijnS ,

  I see by your post that you would like to know if you can use the ePrint Airprint functionality with the printer and when it is configured on the network via an Ethernet connection. I can certainly help you.

  The ePrint and Airprint feature work when a printer is connected to a network. It can be wired or wireless to the router.

  Here is the document with a little information for print from an Apple Mobile Device.

  The documentation shows also wireless, but again, it works through a wired too.

  I hope this helps.

  Have a great day!
  Thank you.

• Windows 7, and homegroup to print from my laptop connected wireless...

  I have 3 desktop computers running Windows 7, all networking, all in a homegroup with a HP all-in-One printer attached to one of the desktop computers. I also have a Toshiba laptop, also Windows 7 computer in wireless network and as part of the homegroup. When I print from the laptop, sometimes it will print and other times, it will send the print job but it's like the printjob enters the twilight zone and nothing happens. Confused on how to solve this problem, any suggestions?

  Hello

  1. What is the number of the HP printer model?

  2 are you able to print correctly on other computers?

  3. who is the antivirus installed on the laptop program? Is there a firewall integrated with the antivirus?

  4. is this problem limited to any specific application such as Internet Explorer, Microsoft Word etc.?

  It seems that the firewall program is blocking the printer. I suggest you perform the steps.

  Method 1:

  Step 1: if you have McAfee or Norton installed on the computer, you can change the default firewall settings and check.

  Step 2: Disable the anti-virus software if installed some and check.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Restart the print spooler service

  You must be logged on as administrator to perform these steps.

  a. open Administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on print spooler service and then click Properties.
  d. under the tab general , next to Startup type, make sure that Automatic is selected.
  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  See also:

  Why can I not print

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Hope this information helps. Response with status so that we can help you.

• I can print on a matrix printer from virtual pc

  I have a host with Windows 7 installed. I installed Vitrual PC with XP. I have a matrix printer attached to the LPT1 port, installed on the host operating system and the guest. My application software written in VB6 with SQL 2000 backend is installed and working perfectly on the guest. But I'm unable to print from the guest. Help, please

  A forum appropriate for this question is Windows Virtual PC and XP Mode.

• Page layout is changed when printing from the internet

  When I print from the internet, the page layout is changed even if there is space on the paper to print an entire line, say photos and captions.  Also, it shows in preview print and happens when I print from two different computers.  My option is sent to "keep the page layout.

  Hi Trishpm

  I have the same problem when printing via wirelss network attachment that I print not print the same way, have you managed to solve the problem?

• PDF file with print restrictions still prints from gmail browser

  I saved a pdf file that is password protected. The file is quite locked, no no printing, no images, no text copy change...

  But the problem is that when the file is considered to be an attachment in gmail and return 'Preview' of the browser mode (in this case, firefox) it can be printed from the browser. a way to solve this problem? basically adobe security was bypassed easily even without a sophisticated hack. #disappointed adobe!

  Actually, it depends on how you password protect a document. If you just put a password on the file, but don't encrypt, Yes, not comply with can applications rules and opens the PDF file. But you can encrypt.

  See Security with passwords, Adobe Acrobat PDF files.

  -Dov

• No option to open a PDF from an attachment

  I recently had trouble opening a PDF that has been attached to an e-mail, and while mucking around with it, I tried it opens in Word (which did not help this particular issue anyway).  Unfortunately, now, all my PDFs by email automatically open in Word instead of Acrobat Reader.

  So now, that my question is, how do them automatically open in Acrobat reader directly from the attachment by e-mail instead of Word? For the moment, I have to save them all to my c: drive, then right-click on it and select open with Acrobat Reader 10.  What I want is that they will automatically open in Acrobat Reader 10 rather than having to save their all my c: push first because I have many, many of them in print.  Can someone help me with this please?

  Hello

  Can you try to save any PDF on your local computer (say C:\) and then right-click on the same.

  1. click on the "open with > chose the program.

  2. Select Adobe Reader 10 and make sure you check the box "always use the selected program to open this type of file."

  3. click OK and you should be good to go.

  Hope that does the trick

  Ankit

• The printer options not available when printing from Lightroom

  Hi all

  I have a problem with the interface of Lightroom 2 (version 2.4, executed in 64-bit mode on my Intel Apple Mac with Mac OS X 10.5.8 (Leopard)) to my printer driver, an Epson Stylus Photo R800.  I can see looking through the forum that there has been a lot of problems with printers, but none as far as I can see that seem to cover my particular problem.

  In the Lightroom print module, after setting everything up, selecting the correct ICC profile for the printer/paper etc. I click on the button "print...". "at the bottom of the right panel to launch the dialogue of the printer.  My problem is that the essential options, I need access to this printer dialogue, namely 'Print setting' (to determine the media type, and print quality) and "Color management", (to disable the printer color management)-are disabled.  To be exact, these options have a line through them, as if they were crossed.  "Print option" and "Setting the Extension" are similarly disabled, while "Layout", "Paper handling", "Cover Page" and Planner "are available.  (See JPEG screenshot attached.)

  If I try to select one of the options not available such as 'Color management' I see the following on the screen error message:

  "The bundle 'Color management' couldn't be responsible because it does not contain a version for the current architecture.  Contact the creator of all here for the most recent version: Color Management 3.09, SEIKO EPSON CORPORATION 2001-Copyright (C) 2005. All rights reserved. »

  The strange thing is, if I print from Photoshop CS3, there is not this problem: "Print setting" and "Color management" are not disabled, and I can make the adjustments I want.

  Coming off the printer prints color are way off if I print from Lightroom, so that from Photoshop, they are great - I guess because of this problem (I can not turn off printer in Lightroom color management, so that I can in Photoshop).

  I guess that this is a problem in the interface between Lightroom 2 and my printer driver, but I find it strange that I don't have the same problem in Photoshop.

  I have re-installed the latest printer driver downloaded from the website of Epson many times, following the instructions to the letter to Epson to remove the old drivers of my machine, to nothing does not.

  I really want to print from Lightroom instead of Photoshop, I like the simplicity of the Lightroom print module.  Can anyone throw any light on this?  Any help or ideas gratefully received!

  Thank you

  Ian

  Just save a driver of printer/preset in any 32-bit application. Then apply this preset when you print from LR runs as a 64-bit application. It is only the interface that is the problem. It should show very well, at least it does with Canon printers.