Printing in CS6 problem

Similar Questions

• Error when you try to print through CS6 on Macbook Pro at Epson 7890

  Error "there was an error in the opening of your printer. Printing features won't be available until you have selected a printer and reopened all documents. "seems to be everywhere on the web without any solution.  Epson says it's a problem of software with Adobe CS6 - I can print on all programs on my printer Epson 7890.  They just cling on me after that.  And they have a point.

  I have all the latest updates of adobe and Apple.  10.10.3 on 2012 macbook pro with the retina display running.  80 G of free space on SSD.  New Epson printer ran fine after installation for about a week and then this happened and I was not able to print from.  I have all deleted and reinstalled the drivers and checked all cables.  It works very well with other programs.  Unfortunately, I am a photographer who needs to print from CS6 for efficient workflow - and hey - it should work right?  In my view, it is a major problem and no one has a handle on it at Adobe.  Please let me know if I can help troubleshoot - I retired IT - software development for most.  It's important!  Obviously CS6 throw errors on the printer and does not allow communication to occur.

  Please advise!

  Thank you

  Kerry Emery

  Kerry Emery photography

  www.kerryemery.com

  I found that it works.  Finally...

  See if that helps you at all.  Adobe doesn't seem to be on the ball with this one.  Not sure why it occurred-, but this finally fixed it for me.

  Try resetting your preferences file.

  Start Photoshop and immediately press Command + Option + shift.

  Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

• OfficeJet 4630: Install new printer - ink cartridge problem

  I'll put up a new HP Officejet 4630. I installed two cartridges of HP61 that came with the new printer. The menu of the poster printer "ink cartridge problem, the following ink cartridge needs to be replaced" followed by a black circle. How a new cartridge would be acceptable?

  Follow-up of your steps. Cartridges still a problem in the printer display.  Took printer at Staples. The store manager confirmed my status then loaded 2 new cartridges (free) the sales basket - printer worked.  Staples deals custormers good!

• business cards printing Avery 8871 problem

  I have two cards that I designed and printed without a problem until I got my HP Officejet 6600. I have tried everything I can think, but the cards (on Avery 8871) print too the top of the page. The strange thing is that they print PERFECTLY on regular paper, but when I use the card, it is turned off.  What should I do to fix this?

  Hello

  Could be due to the thickness of the paper. It doesn't support that care: up to 200 g/m2 and 60 to 105 g/m2 paper

  Kind regards.

• 47.01 restart the printer if the problem persists

  Hi all

  Someone has an idea to help on this case, I was open plotter HP DesignJet T1200 and I got a message the screen says that error 47.01 restart the printer if the problem persists, call the HP Support and I can't do anything.

  anyone can help it would be very useful to me and many thank in advandce.

  An error was detected during the detection of the print head. Reinstall all the

• Printing and ink problem

  Hello. I have a HP LaserJet CM1312MFP series (which has included c.t.). It is connected to a Windows XP computer. However, since it is a network printer, anyone on the network can access it. The printer is had problems for some time now, and he treats the ink does not spread outside in the front tray, as well as other printing problems. Whenever I want to print, the first page it prints is a page of nonsense with alternating black and white lines parallel. After the first pages of one or two, it stops - and can return to normal after that. The ink was spread outside, on the front and the back, while change us the black and white cartridge when he asked us to. We hardly if ever printed in color, but for a long time, the cartridge color reversed into the machine, and if you want to open it, you can see the ink in the printer.

  We were unable to solve this problem on our own, we decided to check out the forum for solutions.

  Hello EmceeLordand welcome to the Forums of HP.

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a commercial product. You can do to Commercial Forums of LaserJet HP.

  I hope this helps!

• Win 7 update - printing wireless laptop problems

  I upgraded from Win Vista Home Premium to Win 7 Home Premium on my laptop.  I can connect is no longer on my wireless printer.  It is recognized, but is unable to print.  I have changed ports, I checked the Norton and Windows Firewall, I connected via USB, still is not printing.  I had added Norton 360 before I upgraded and printed correctly.  It's just after the upgrade to Windows 7, it is now a failure to print.  I have a Lexmark X 6650 printer.

  Hello Mary,.

  Thanks for posting your query on the Microsoft Community.

  I would be grateful, if you can provide us with the following information to help us better understand the question?

  • You get the error message / code error on your screen?

  I suggest you to follow the below methods and check.

  Method 1:
  Let flow the FixIt and check if it helps.

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the question did not resolve, try Method 2,

  Method 2:

  If Windows can't detect a printer that you want to use, follow these steps to find and add the printer manually:
   
  a. open devices and printers by clicking the Start button , and then on the Start menu, clicking on devices and printers.
  b. click on Add printer.
  c. in the Add Printer Wizard, select Add a network, wireless or Bluetooth printer.
  d. in the search for available printers page, click on the printer I want isn't listed.
  e. on the find a printer by name or TCP/IP address page, choose How to find the printer you want to use, based on the type or location of the printerand then click Next.
  f. complete the additional steps in the wizard, and then click Finish.

  To make sure that printers on the network are displayed, check if the network is working properly. For more information, see view the status of your network.

  If the problem persists try Method 3,

  Method 3: Perform the steps in the below article mentioned.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If the problem remains try Method 4,

  Method 4: update the drivers from the manufacturer the printer.

  Reference:

  Lexmark X 6650

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Office jet while a 6600 PRINTER with scanner problems. but I can't scan where I have a modifiable document because only let's scan me documents I can not edit

  original title * Bubbles44

  I have an office jet while a 6600 PRINTER with scanner problems. I am trying to scan to my hp Pavilion 23 all in a computer with windows 8, but I can't scan where I have a modifiable document because only let's scan me documents I can not edit! HELP ME PLEASE!

  Hello Sharon,

  Thanks for posting your query on the Microsoft Community.

  I would be grateful if you could answer the following questions:

  How the computers are connected? If they are connected as a workgroup or domain?

  Method 1: Disable the security software and check if the printer works.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: You can turn off the Windows Firewall and see if you can print.

  1. Press the Windows key +X key.
  2. Select Control Panel.
  3. Click on the firewallof Windows .
  4. Select enable the Windows Firewall On or off on the right next to the sign.
  5. Select the radio buttons Turn off firewall under Private and Public network settings

  Warning: after reviewing the issue, turn on the firewall.

  Method 3: Refer to the suggestions for the following links.

  How to troubleshoot printing problems in Windows:

  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Solve printer problems:

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps and let us know the State of the question, we will be happy to help you.

  Thank you.

• VM Acrobat printing and printer... problems?

  I've been printing without any problem of my VM but it has just stopped working. I have Acrobat Pro and HP Photosmart D7260 installed on my host machine and connected via NAT to my VM Windows XP Pro. When I print, I get text "garbage." I looked around and I noticed that it seems to be a recurring problem. I followed each thread and a blog that I could find. I still have no luck, so I post here. I'm almost possitive is an errors of communication between computers and printers. Is there something I can do? I would be happy if I only get Acrobat to work. I am very experienced with Windows and very good with OSX10.5. Little or no hand-holding.

  If you know what I've done: I have repeateadly rebooted the virtual computer. the VM and the host; the Modem, router, machines and HP printer. Always the same. I went to bridged and installed the printer with Hello. I had the same type of orders very.

  My configuration:

  Fusion 2.0.1 - with VMware Tools

  Mac Pro OS X10.5

  Windows XP Pro

  Adobe Acrobat Pro 8 on my Mac

  HP Photosmart D7260 USB to an Airport Extreme connection

  NAT network

  No printer driver installed in the Windows XP VM

  Thank you guys so much!

  Removed double wire.

  I'm not clear on how the client connects to the printer. You mention that no drivers are installed in the guest - are you using Fusion impression passthrough (e.g. under the VM settings, printers is enabled) or another method?

  Have you tried to reinstall Fusion (this will not affect your virtual machines) and then restart the host?

• Problems printing in CS6 size

  I have an image I want to print it looks exactly like the picture on the screen. Problem is that when I resize it, harvest it presents to its size(Image>Size) I can't resize to include the entire image as what.

  I am this explaining correctly?

  I want that the spectacle of the image to crop any picture showed, but print on 11 x 17 or 9 x 13

  Dan

  Thanks for the step by step Angelo message. Who did it perfectly!

  I knew there was a way. Noel showed me a few years ago.

  Dan

• Printers keep crashing when you try to print documents CS6 but CS5 documents print very well. Please help, we need advice. What should we do?

  I work in the graphics department at a small company.

  All our computers run Mac OS X and contain the following versions:

  -10.6.8

  -10.8.5, and

  -10.9.5.

  The old Macs (10.6.8 & 10.8.5) run Adobe CS5 Standard and the new computer, Mac OS X 10.9.5, Adobe CS6.

  -10.6.8 has CS5

  -10.8.5 has CS5

  -10.9.5 has CS6

  Whenever we try to print something from new computer, it keeps crashing my printers. The new computer installed CS5 but it was a trial version. CS5 documents printed computer again very well, but the CS6 documents always planted printers.

  -10.6.8 prints CS5 documents very well

  -10.8.5 prints CS5 documents very well

  -10.9.5 prints CS5 documents very well (except CS5 is a test which has already failed), but documents CS6 crash printers (both)

  I have a HP color LaserJet 5500hdn (printer CMYK) and a HP LaserJet 4350tn (printer b & w). They are two old printers but can process documents CS5 from any of our computers. The new computer, though, even if it is opened in Adobe Acrobat/Reader, printers will be break.

  We tested a new Dell 2350dn to print documents of CS6, it works beautifully, but the printer ink is too expensive, about $50 more than our current CMYK printer.

  We wish all our computers to run the same Creative Suite (preferably CS6 CC is too expensive for our needs), but we can't upgrade our old machines until we get this sorted printer problem.

  
  

  Adobe has a list of compatible printers or drivers/updates that solve the problem of the printer crashing for CS6?

  Sorry, I have over my work there so this question is no longer relevant to my needs or interests.

• Connectivity with printer Epson wireless problems.

  Epson printer indicates that the wi - fi connection is excellent. The connection to devices also indicates that the signal strength is excellent. However, when I go to print it tells me that there is no wireless printer! This happens with the iMac, iPad and iPhone. This just started happening about 2 weeks ago.

  See if it works... In system preferences > printers and Scanners choose your printer and remove it from the list, and then add it back

  Get help to solve the problems of printer on your Mac - Apple Support

  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?useCookie=Yes & infoType = FAQ & oid = 209708 & prodoid = 63095161 & foid = 230405

• I'm unable to print using firefox message is 'unknown printer error' no problems with other browsers

  I tried to print a coupon to an e-mail and the message I got was 'unknown printer error '. I am able to print from word and other items on my desktop as well as another browser. I can't print anything using Firefox. I have not updated recently, and the problem seems to have occurred spontaneously. Can help you.

  Try of the reset described here:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_printer

  Make sure that you reset all the preferences for this printer.

• HP all-in-one 4620: uninstalled 4620 printer but getting 'problem starting HPStatusBl.dll' notice at startup.

  I uninstalled the printer software HP 4620 on my HP computer running Windows 8.1. When you start the computer, I get the message "error loading c:\programfiles\hp\hpofficejet4620series\bin\hpstatusbl.dll" window message

  Hey @SteveJG,

  I would like to help you today to solve the 'problem starting HPStatusBL.dll' message that you get on your computer Windows 8.1. I understand that the uninstall your HP Officejet 4620 e-all-in-one printer has not made a difference. Just so you know, this error message is for a 'service' that Windows is trying to start it's related to the HP device. I just go and delete this file manually. Please follow the steps below.

  1. Open the Start screen by selecting the Windows button in the bottom left of your computer screen, or by clicking the Windows button in the bottom left of the keyboard, to the right of the Ctrl key.
  2. When the splash screen opens, type computer (can show that This PC)
  3. Click on the computer (or PC) to start the window
  4. When the computer window opens, click on the Drive C
  5. Click on users
  6. Click on your user name
  7. Select AppData
  8. Select roaming
  9. Select Microsoft
  10. Select Windows
  11. Select the Start Menu
  12. Select programs
  13. Finally, click Start
  14. You will see a shortcut here to monitor alerts - ink HP xxxxx. Right click on this and 'Remove' it.

  Once the file monitor ink Alters has been removed, restart your computer to verify that the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Good luck!

• HP Officejet 8600 more print and scan problems

  Hello

  I had my HP officejet 8600 more for 2-3 years and always had problems following and just kept reinstalling the drivers as a quick fix. I am now starting a business from home and I have no time to deal with printing and scanning the questions and, of course, my warranty has expired! My operating system is OS X version 10.9.4.

  When I scan to my computer, the printer indicates "not found computer." The status of my mac is no different than when I scanned a document a few days ago! Remove and reinstall the drivers solves this problem temporarily but I want it fixed permanently.

  In addition, when printing, sometimes a page can print immediately and at other times, it may take 5-10 minutes to print even if its status is 100% full in the print queue - even once, reinstall the drivers is a quick fix but I want a permanent solution.

  Any help to solve these problems would be greatly appreciated.

  Thank you very much...

  Hello Hello!

  I thank very you much for getting back to me! Glad to hear things are working at the moment! Please take the time to click the button of "acceptable Solution", while others may see this post and they can get a fix quickly. Also if you want to say 'Thank you' click 'Bravo '. I would really appreciate one or both of these actions because it makes things easier for the new people on the Forums to get help fast.

  Have a good!