Updating of the PC - start HP lost.

Similar Questions

• my windows vista computer will not except the automatic updates and the system starts it configures only the updates

  original title: my windows vista will not except the automatic updates and the system starts it will only configure the process which can be done to solve this problem

  my windows vista computer will not except the automatic updates and when the system starts it will only configure the process which can be done to solve this problem

  Hi Glennisidore,

  Try running the fixit http://support.microsoft.com/kb/971058 in aggressive mode and see if, after the reboot, you are able to perform your edits again.

• Satellite A660 - 12 fall down during the update of the BIOS, start again

  Hi all

  I bought my laptop A660-12th in June 2010, and a few months I've been encountering frequent problems of freezing of the screens, stops unsollicitated... so I decided to clean up my computer and update programs the computer base (including the BIOS) with the latest versions available on the Toshiba site, hoping it would be more correctly.

  Then, when it came to upgrading the BIOS. I wanted to do it slowly because I know this is the most delicate point in the update, but I don't know what is happening during this step: program launched barely (and it was the only program running) that it has been already updated my BIOS, and in this special moment my laptop automatically go restarted... obviously I don't have BIOS more because my computer does not start still, the screen does not display anything AT ALL. There is just the noise of the fan and the lights when I turn it on, but that's all.

  I am so very angry to the Toshiba BIOS update program (and also Toshiba), because I feel that I have everything done correctly, but nevertheless this update bricked just my computer.

  Is it possible to get it back, or do you also think it bricked and lost?

  I'm afraid BIOS is dead now and what you need now is a professional help from m.
  I highly recommend you contact the nearest Toshiba service provider, explain the situation and ask for help.

  Addresses and phone numbers, you can find on - http://eu.computers.toshiba-europe.com/innovation/generic/ASP_SUPPORT/

• When I did an update on the Dell computer I lost my list of favorites on the homepage

  When I did an update on my Dell computer I lost my list of favorites on the homepage

  CrystalBall © SEZ...

  Where are my favorites in IE9? What are the toolbars?
  http://answers.Microsoft.com/thread/313b8179-0aa6-422F-9ece-81e6f60f6736

  You will find support for Internet Explorer in this forum: http://answers.microsoft.com/en-us/ie

• Cannot install Windows update, the error message "" Windows update canoe currently check for updates, because the service is not running ".

  Initial version of updated title: windows

  My "Windows update" is not updated. The problem started recently and its shows the error message "Windows update canoe currently check for updates, because the service is not running. You may have to restart your computer "." I tried it with several reboots, but there still is not up to date. Kindly help.

  Hello

  Have you made changes on the computer before this problem?

  Method 1:

   

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Try the procedure described in the following article and check the status of the issue.

  http://support.Microsoft.com/kb/822798

  Restart the computer and check it please for windows update.

  Hope the above information is helpful.

• Downloaded the latest Windows 7 update yesterday, November 3, 2009 and lost all my "Favorites" in MSN. Also, when I do a reboot, the Verizon FIOS Media Manager starts. Only the downloaded last update - has nothing else. Please notify

  Downloaded the latest Windows 7 update yesterday, November 3, 2009 and lost all my "Favorites" in MSN. Also, when I do a reboot, the Verizon FIOS Media Manager starts. Only the downloaded last update - has nothing else. Please notify

  Yes I have FIOS Media Manager installed, but I've done since the start of Windows 7.  For the first week or so it does not start on my download restarts.  It started with this Nov 3 update from Microsoft.  I went to downloads and there were two of them; Update for Internet Explorer 8 for x 64 based and updated Windows Defender definition.

  After you install these two updates on restart FIOS M.M. was live at startup and my favorite MSN have disappeared.  I disabled FIOS M.M., but somehow, he has been activated with this download.  I went on my drive external backup and recovered the Favorites but am always intrigued by this phenomenon and how it changed my registry.

• Error Windows update cannot currently check the updates because the service is not running, you must start the computer, windows update services does not

  Original title: Windows Update service is not running / working and is not listed in services.msc

  When I go to windows update a red shield with a white cross appears and when I click search for updates this message appears:

  "Windows update cannot currently check updates because the service does not work, you will need to start the computer"

  * Restared several times-nothing has changed

  Despite what other threads have advised to:

  I checked in the services and WINDOWS UPDATE, Background Intelligent Transfer Service or encryption services are not listed!

   

  * I have changed the settings to "Never search updates" and then back to "install updates automatically" - nothing has changed

  * I ran the Malicious Software Removal Tool http://www.microsoft.com/security/pc-security/malware-removal.aspx- we say that everything was ok, but I can't always verify updates

  * I ran the download to reset windows update components http://support.microsoft.com/kb/971058/en-us but still I can not check updates

  (Nothing is in the update history)

  Am really worried!

  Thank you!

  Hello

  
  Have you made changes on the computer before this problem?
  Method 1:
  You can try to start the fix - it and check. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Method 2:
   
  You can read the following article.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.

  Method 3:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

• Printers are lost after installing updates and could not start get error 1053 service print spooler service message has failed to demand launch or control in a timely

  Original title: print spooler does not - error 1053 - Windows 7

  I have a HP Pavilion dv4-511 with Windows 7.  2 weeks ago I ran a Windows Update and all my printers installed have disappeared after a reboot.  I did a system restore and they were all back.  Yesterday, I installed an update to a software (Soonr) and it's the same thing.  I clicked on the print spooler service to see if I was able to restart and got the error 1053 saying "service did not respond to demand launch or control in a timely." If I click on "Add a printer" in the menu devices and printers, I get the following message: "Windows can't open add printer."  The local print spooler service is not running.  Please restart the spooler or restart the machine. "I rebooted the computer and the same thing continues to happen.  I did a system restore and the printers are all back.  It seems that every time there is a change to any software, it creates this problem.  Help, please! Thank you.

  Hello

  Welcome to the Microsoft community!

   

  When the updates are installed, the printers will be lost and when you try to start the print spooler service, you get the service saying error 1053 has failed to demand launch or timely control.

   

  The problem may occur if some system files are corrupted or because of malicious content.

   

  I suggest you follow the steps mentioned below:

   

  Method 1: File system (CFS) Scan Checker

  SFC scan will find all missing or incorrect system files and repairs them.

   

  See the site:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  Method 2: Scan the computer to remove all possible malicious content

   

  See the site:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx .

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

• The Internet connection is lost after installing Windows update

  Original title: put automatic has caused the loss of access to the internet

  After that the last automatic updates have been installed on the 8/17 or 18, I lost the internet connection.

  I had to restore my computer to an earlier date. When it was complete, I had access to the internet.

  I have reset my updates for having me choose when and which ones who.  When I install the updates, how can I know who we are at the origin of the problem.  In addition, how will I be able to solve the problem?

  Hello

  What is the error when you try to access the internet after upgrades?

  Method 1: Update the network drivers

  I suggest to update the network drivers, then try to update and check if the problem persists.

  Updated a hardware driver that is not working properly

  http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly.

  Method 2:

  We can find the update by installing the updates one at a time, the origin of the problem.

  To do:

  1. click on Start, type windows update and press enter

  2. click on check for updates in the left pane of the window

  3. when updates are found, open the list and select one at a time and install them.

• Firefox for android crashes at start-up since the update of the lollipop

  Whenever I start Firefox on my M8 Verizon HTC ONE since the update of the lollipop, it crashes after about a second or two. I use the latest version of Firefox on the game store and the behaviour continues even after uninstalling Firefox and do a clean install.

  Thank you, this is very valuable information. I have filed bug #1140830 to this topic, so let's hope that mozilla engineers will look at this issue soon...

• How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please?

  How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please? If possible, please cover all platforms, Mac, Windows, Linux, although the first mentioned is what currently applies to my situation.

  Thank you.

  Such a download is usually recorded in a updates or updates folder in the program folder or the Firefox application.
  You can delete this folder to cancel the download.

  If the files have already been downloaded, then delete the files in the folder updates\0 and updates.

  • http://KB.mozillazine.org/Updates_reported_when_running_newest_version
  • http://KB.mozillazine.org/Software_Update

  Mac: /Applications/Firefox.app/updates "/path_to/Firefox.app/Updated.app"
  Linux: "/path_to/firefox/updated"
  Windows: C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  

• After updating to the latest version of windows, I lost all my favorites. They are not in the backup folder.

  Windows update and now all of my favorites are gone.

  See the article of recover lost or missing bookmarks for possible solutions.

• Update of HP Z620 BIOS causing the disc start plu

  Dear Sir

  I updated the system of workstations HP Z420/Z620 (International) BIOS to 03.69 Rev.
  18 June 2014 to my windows 7 Professional. After the reboot, it could not find my boot drive. In the Bios, the order of boot to SATA drive name list is totally a mess, named as "SS", instead of SATA0, etc..

  I boot from my CD of windows 7 Professional and try to fix the system, but he said something like a different type of system.

  What a bad upgrade experience and please help me to recover!

  P.S. This thread has been moved from workstations - Itanium-Based, hp9000, Visualize for workstations - w series, series z, legacy x and xw series. Forum Moderator - HP

  Not sure what would happen when your update of the system BIOS, but the BIOS flashing can be risky, especially if you get a power disruption or during the writing of the BIOS itself, there are a few other firmware issue. For this reason I almost always perform updated the BIOS when the system is connected to the inverter to limit the outages momentary causing failures flash.

  HP also have even known to release a BIOS and then remove it on their download page for undocumented reasons. These reasons may or may not be related to flash failures or other problems, we do not know, only HP really knows, but they don't say.

  For your Z620, you can see the gaps in the list of the BIOS version specified in the last note of release of the BIOS itself. In fact the release notes state that you require 1.07 update to 3.52 or later and says that he must first update to 1.23 (which curiously is not included in the version below the list!).

  So you SHOULD ALWAYS read the BIOS release notes. In fact, you should read all release notes of all BIOS versions available in order to make sure that you know what has changed and what prerequisites indicators exist. It's tedious but better than a flash failure.

  Anyway, from the issue date BIOS, you will notice that your BIOS must be at 1.07 or later to be able to upgrade successfully to a BOS 3.05 or later version. Therefore, you should check to see what BIOS you have done and if you have < 1.07 you MUST update to the latest version of the BIOS BIOS 1.x (to 1.14 BIOS of my reasoning, because it is the most recent in the history of the versions) as it is a sine qua non.

  In fact, I would update BIOS 1.14, then update a BIOS 2.08, then BIOS 2.55 before if we consider a 3.05 BIOS and more late a 3.69 BIOS updated. It is pedantic, Yes, but perhaps a bit more secure (especially if you use an inverter). I always check the version of the BIOS and BIOS (and so the BIOS settings) after each flash before jumping into the OS...

  But even if you cannot start the operating system, you should be able to Flash the BIOS as follows:

  • install 7-zip on a work computer
  • Download the bios appropriate 1.14 or 3.69 for your system and save it
  • Right click the bios file saved, spxxxxx.exe, and then select < 7 - zip > < archive open >
  • Double-click the folder (not name) stated in 7 - zip file manager
  • Double-click on "bios falsh.htm" and read the "flash back" and or sections of "failsafe bootblock recovery."
  • Follow the appropriatesection of those that you just read...

  Therefore, if your system messages, and you can actually get into the BIOS, use the flash BACK method. And depending on what version of BIOS your system indicates boot buring, flashing the BIOS is appropriate (if the system shows BIOS 1.14 1.x then flash, if the system indicates BIOS 3.x then flash 3.69). I hope that this will ensure that your BIOS has been flashed properly.

  Once you are sure that the BIOS is the correct version and date, then look at all the parameters and, hopefully, HARD drive names are listed correctly and your boot disks/raid volume can be found.

  It's also a good idea to go into the BIOS and hit < LTRC > < A >, then go in "system ID and check the entries against the labels on your machine." Pay special notice that the BuildID, SKUNumber & ProductName in BIOS match labels (because they must be correct for the HP system to work recovery discs)...

  The only other thing I can think is that you had two or more HARD drive in a RAID configuration and RAID configuration somehow I messed up. If you use RAID, maybe watch the configuration by pressing CTRL + R or CTRL-C while booting. Do not change anything, because you might lose your data, just look.

  If these things do not help, you will need to be very precise about what you did, what configuration you have, state that the system is and what error messages you receive. You can use a camera and post here as appropriate as someone may be able to help and take some snaps different pages problem BIOS configuration screens, configurations, error messages or other...

  It is also unknown if you use an image from HP and referring to HP system recovery disks or you did (re) installed a vanila MS Win7Pro OS using a disc to install MS Win7. And write "something like a different type of system" is not as useful as the actual error message you get.

• Qosimo X 70-A-12N-absence start upward since the update of the BIOS?

  Hello

  I guess that since the BIOS was updated yesterday, after pressing the Start button of the laptop,
  It stops after 4 seconds with a black screen.

  so far, perhaps randomly, when I push any key of the keyboard, start with windows 8.1 normally.

  Qosimo X 70-A-12N
  PSPLTE
  BIOS Version 1.50

  All drivers Toshiba updatet

  Windows 8.1 is installed on the Toshiba SSD 256Go.

  I have not found a new firmware/driver for the SSD.

  Thank you very much!!!
  Chris

  What happens when you perform a full stop and try to restart your laptop?

  You know, it is not easy to say what the problem is here. In case this BIOS update gone wrong and BIOS is damn laptop won start t at all.

• All my tabs are lost after downloading an add on. The tabs start showing my default homepage.

  All my tabs are lost after you download an add-on. The tabs start showing my default homepage. Do I have to have all closed tabs before you download an add-on Firefox? Even the site of add-on Firefox restarts as my default homepage. Is there an add-on to prevent that from happening?

  This has happened

  Each time Firefox opened

  Is always

  Diito. Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6. en-US; RV:1.9.2.6) Gecko/20100625 Firefox/3.6.6