Printing problems - number of copies squared

Similar Questions

• LaserJet 600 m602: Laserjet 600 too large print the number of copies

  I work at the public library, and we have a Laserjet 600 m602 to our public access computers to use. It is a network printer. We have problem with printer what impression of the office 2010 products, if more than one copy is requested printer will go crazy and print several copies much more than requested. The printer screen will say 1 X print the number of copies. Only way to stop it is to remove as many jobs he sees. It acts as if it were several jobs. We do not see this problem when printing from the Internet. Driver HP laserjet 600 M601, M602 M603 PCL6 HPCM600c. processor is set to WinPrint - Raw. Bidirectional support is disabled.

  Firmware is 2305090_000468

  I had already installed the pilot PCL6 universal and implemented to date to 600 M601, M602 M603 PCL6 thought that could be the problem but it has not fixed the problem.

  I would appreciate any help on this matter before going to is broken on paper.

  Thank you

  Melanie

  Solved.

  After a lot of research on reading and tests finally discovered the problem with drivers print and collate. Default settings for Microsoft Office 2010 and Adobe Reader are to gather if one that one copy is activated. For some reason any that caused printer to go crazy.  I tried the Standard driver and universal for the printer, but always had the problem of printing too many copies. I used the PostScript driver and it solved the problem.  Now just get the number of copies required. Thank you for your help.

  Melanie

• printing constantly number of copies after the driver update

  Hi HP

  HP Laserjet 1022n printer. Printing via LAN.

  Observed on two home computers da: Windows 7 32 bit. Windows Vista 32 bit. Windows fully updated by 2013 01/16.

  I let my updated driver via the optional push in Windows Update recently. (2nd week of January 2013)

  Now my printer print an unlimited number of copies, even if only one copy is selected. Exact same behavior on both aforementioned computers. When you look in the print queue in order to stop the waste of paper by cancelling the work, writing project flashes as if the continuous work return it yourself or something.

  Help, please!

  I can't always find the previous version of driver anywhere as it worked flawless.

  Kind regards

  Søren

  I've disabled 'bidirectional support' in the properties-> Ports and the problem seems to be resolved

• Problem of the printer prints do not number of copies

  I was using a HP LaserJet 1160 for 4 years with no problems to speak of. I had a computer of my last XP computer crash and bought this new Vista system 3 months ago. Since installing my printer on this new system Vista no matter how many copies I choose to print from a print window it will give me only 1 copy.  Very simple problem, one might think. I had my team Lightspeed System Support remote access to my computer and they have checked drivers and tested the problem. When I go to print something, I enter the number of copies that I want, and then click on print. I put in 5 copies and it will give me only 1. No matter how many copies I request so that it will only give me a. Nobody knows how to solve this apparently simple problem? I reinstalled the printer. I reinstalled the drivers. I went to Vista Home Premium, Vista Ultimate, I always have this problem.

  Hello

  When was the last time it was working fine?

  Try to uninstall then reinstall the printer drivers.
  http://h10025.www1.HP.com/ewfrf/wc/siteHome?lc=en&DLC=en&cc=us

  All the best!

• Does not print not correct "number of copies".

  I have a little HP Deskjet D1530 came with our computer.  It was working fine.  We had to wear our computer completely cleaned due to hard drive (1 t) was completely full due to a software problem.  I reinstalled the printer and print a complete document (multiple pages), but I made a few changes on the first page and to print 3 copies of the 1st page to give to other people. The printer will only print one page, and I must go and reprint - even if I changed the 'number of copies' to 3.

  I think there is a simple solution, but for the life of me, cannot understand it.  Help please... Thank you, Rosemarie

  Try to use another application to print to the printer for test.  Try now.

• "Reader" in Windows 8 - always keeps the last number of copies when asked to print

  Hi, my colleague is running Windows 8 on a Dell desktop computer, when she displays a file in 'Reader' and enters a number of copies to print, any file she looks after this and then try to print then remembers also the number of copies - it is not default to 1 copy.  Any help appreciated.

  Hello

  Thanks for posting your query in Microsoft Community.

  • The problem is specific to printing using Reader app?

  I understand that the layout print Reader app don't no default 1 and I will be happy to answer your query.

  I suggest that you manually change the parameter 1 and take print of all thinking to test. After printing of any document, close the Reader app and then check if the print setting change to 1 because you closed the app with 1. If the setting print page does not change, you can try following steps and check.

  Step 1: Put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Step 2: Run Microsoft Safety Scanner

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Microsoft safety scanner

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  From now on, try the methods above and let us know the update.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• print to printer noprint (1 copy) - how to set the number of copies by default

  Hello.
  
  I need specific concurrent programs to be automatically printed, so the number of copies that specific programmes should be on 1 as a default value.
  
  Which is adjustable at the level of the simultaneous program (only for the particular simultaneous program)? I can select separate printer for the specific program, but not the number of copies.
  
  The only way I've found is to "create concurrent Copies: report" property to 1 in the site-level profiles system.
  But that means will have also all noprint printers number of copies set to 1.
  
  Can there be problems NOPRINT: unknown printer error ?
  Is there another way?
  
  Thank you
  Kind regards
  Kris

  Decided not to use the Auto Print after all.

  Thanks for the help!

  Kind regards

  Kris

• Number of copies of print issue.

  Hello, I am running office 2007 and just recently, I found that I can't print more than one copy at a time.  regardless of the number of copies, I ask, only one copy prints.  I went into my control panel, but discovered nothing to settle for me to receive the number of copies requeseted.

  Mr. Mercier

  I have uncheckt the collate box and everything works as should be...

• How can I learn the number of copies that were printed on my HP 8600 printer?

  How can I learn the number of copies that were printed on my printer HP 8600 (model CN578A)?

  I would like to see how many copies I'm actually contained in the inkjet cartridges - especially the less filled 'starter' cartridges that came with my new printer.

  Hi timeoffbob,

  Welcome to the HP Forums! I see that you're wondering, how do I know the number of copies that were printed on your HP Officejet pro 8600. I'm happy to help you!

  Please take a look at printing a status report. On the report, it will be number of printed pages. Printing a Test Page.

  Hope that answers your question and have a nice day!

• This e in section number of copies on all in one printer deskjet 4335.

  Someone knows how to get the E number of copies on an all in one printer deskjet f335

  Thank you

• How to set the number of copies of default print to 2 to 1 in Adobe's PDF Viewer

  When print us a default PDF 1 copy is printing and we can choose the number of copies 2 or 3... preferably PDF Viewer. Now I want the number of default print copies value 2 instead of 1, means when the user default print 2 copies should be printed without selecting the option 2 print copy pop up.

  Please suggest me if the option is there, I use PDF reader version XI.

  Thanks in advance.

  I do not think it is possible to define.

  On Tuesday, January 12, 2016 05:08, prateeks40378576, [email protected]>

• Is there a way to limit the number of copies (printing) of a PDF document, for example 5?

  Hello I am looking for a solution limiting the number of copies that a user can perform from a pdf file

  Is not possible. It could be if you used the DRM protection, but it is very expensive.

• HP Deskjet Ink Advantage 2645: Printing problem

  I tried printing the photos on Microsoft Word, my images are always in line with the margins. And then I check my preview before printing, and it's perfect

  But when it prints it completely different, it looks almost as if its zoomed in

  You can help me solve this problem

  Thank you

  Hello @ChelsHp,

  Welcome to the Forums of HP Support! I see that you're running into some problems printing photos to your HP Deskjet Ink Advantage 2645. When you print the picture, the image looks as if it is maximized. You run the Windows 8 operating system and print photos from Microsoft Word.

  Have a look here to ensure that you have the correct settings: Print the Photos saved on your computer (Windows)

  1. what sized photo paper are you using, you change the paper size in the print preferences?

  2. that you get error messages when you print?

  3. If you print a document, or a copy that is zoomed also?

  I was able to find this solution on the Forums, which can be useful:

  "Right-click on the image. Choose the size and Position. In the next window, select Position.  In the new window, select Horizontal, Center and to the right of the parent to the Page, no column. »

  If you are unable to print the photo, try the following steps:

  Here's how to move photos from your screen to the printed page:

  1. open the library of images from the desktop and select the photos you want to print.

  You want to print a photo? Then click on it. To select multiple photos, hold down the CTRL key when you click on each of them.

  2. tell Windows 8 to print the selected photos.

  You can tell Windows 8 to print your selection either of these ways:

  • Choose the tab sharing the folder in the main menu and choose print.

  • Click one of the selected photos, and then choose print from the context menu.

  No matter what method you choose, the print pictures window appears.
  

  3. Select your printer, paper size, quality, type of paper, layout of picture and the number of times to print each photo.

  The print pictures window allows you to change several settings. (If you don't change what whatsoever, Windows 8 print a copy of each picture on a sheet of 8 1/2-x-11 - inch photo dear.)

  • Printer: Windows 8 lists your default printer, your only printer, if you have only one - in the top-left drop-down list. If you have a second printer that you use only for photos, select that printer from the drop-down list.

  • Paper size: Windows 8 lists the different paper sizes in this drop-down list where you can print on anything other than the normal 8-1/2-x-11 inch photo paper.

  • Quality: leave this at 600 x 600 dots per inch, for most photo printers. If you print to a regular printer, go to 300 x 300 dots per inch.

  • Paper Type: select the type of paper that you have placed in your printer, usually a type of Photo paper. This menu lists usually several types of photo paper, glossy paper of semi gloss to matte. Don't know what kind of photo paper, you? The choice between the photo classified options paper, as they will turn out better that you choose plain paper.

  • Layout: on the edge right photo print window, choose how Windows 8 should organize photos on the page. For example, you can print each photo to fill an entire page, print pictures of nine portfolio or print something between the two. Whenever you select an option, the wizard displays a preview of the printed page.

  • Copies of each picture: choose anywhere from 1 to 99 copies of each image.

  • Adjust image to the surroundings: leave this checkbox enabled for Windows 8 to fill the paper with the picture. (This option may slightly trim the edges of your photo for a better fit.) * Source

  Please let me know the results. I look forward to hear from you.

  Thank you

• Windows 7 HP990c printer problems

  Hello

  When I print multiple copies using XP I have no problem. In Windows 7, it prints one (1) copy when requested but 2 or 3 times the number of copies at the request of several copies.  The XP driver is certainly higher, because it allows me to choose ink 'light' setting, which is very useful to prevent bleeding through the paper.  I checked my settings of printer several times for example "pages per sheet" 1 and 'copy the number' 1 copy, etc.

  Everyone knows about similar issues and if so is there a cure?

  I have no confidence in the search for a cure and hope I can add a second hard drive with XP installed on my new computer Windows 7 does not allow me to install XP on my existing hard drive.

  Kind regards

  David

  "David Lisgo" wrote in message News: fb83baaa-40b0-4153-a496-438102e95614...

  Hello

  When I print multiple copies using XP I have no problem. In Windows 7, it prints one (1) copy when requested but 2 or 3 times the number of copies at the request of several copies.  The XP driver is certainly higher, because it allows me to choose ink 'light' setting, which is very useful to prevent bleeding through the paper.  I checked my settings of printer several times for example "pages per sheet" 1 and 'copy the number' 1 copy, etc.

  Everyone knows about similar issues and if so is there a cure?

  I have no confidence in the search for a cure and hope I can add a second hard drive with XP installed on my new computer Windows 7 does not allow me to install XP on my existing hard drive.

  Kind regards

  David

  The last comprehensive features for your printer driver package was released in January 2002. Of the generic drivers as included in Vista and Windows 7 will offer never the same level of performance. If you want a printer that works well, buy a new...
  
  --

  Mike Hall - MVP Windows Experience
  http://msmvps.com/blogs/mikehall/

  Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• Eny HP 4520: Printing problems in word Document with photo

  I just purcahsed a HP Envy and I use the function print via the wireless option. I have a word document that I was able to print in the past which has an image inserted into the document. All in the words fine printing copies only the upper left photo f. When I show preview before printing, it shows that if the whole of the document will print correctly and the image should print very well... I have attached what print preview looks like and what actually prints

  Hi @dmanyeah,

  Thank you for reaching out to the forums! I understand that you encounter printing problems in Word, the full image is not printing. Thanks for providing the screenshots. I'd love to help you.

  Try to print a picture from another application to see if you have the same problem.

  To exclude the driver, install a generic driver to see if you have the same results.

  • On the computer, go to start, devices and printers, right-click on your printer and select printer properties.
  • Click the Advanced tab and click new driver, and then click Next.
  • HP Deskjet 9800 by selecting in the list or the Deskjet 990c printer, click Next, Finish, and apply the settings. (you can always go back and revert to the original printer driver)

  What version of Word are you using?

  If the problem is resolved and you appreciate my help, please click on the "accept as Solution" and the buttons 'Thumbs Up'. Let me know how make you out. See you soon!