Printing with the Photosmart 5514 problem!

Similar Questions

• Printing with the photosmart 5510 and MAC 10.7.2 is a dream? and I don't even go to part scanning

  Wauw, buy a photosmart HP 5510 printer and you are very busy for Christmas together to print wireless?

  Unpack your photosmart 5510 and install?

  Well, it prints 1 page and then you get the message printer isn't ready if you want to print your next page.

  1st day, I try with my own knowledge.

  
  

  Updates

  Reset the router.

  Work with difficult IP put in the printer.

  Change the IP address via the Web interface.

  Change the settings of the router

  Try to reinstall the software which is not even possible that most all do the manual says that it is.

  Still 1 print and then nothing. Reset the printer or change the IP in the difficulty of the printer, labour, still 1 print or scan or 1 airprint but then nothing.

  (printed about 35 pages of BS as test)

  Day no. 2, new day of new towers

  Looking around the God thank you forum I'm not the only one who has this problem.

  A lot of people, same problem, some struggle for 6 months, contact support without success.

  Damm scan I even was going to this party and look at all the users having problems. Allow me to first impression please.

  And right now, it looks resolved advice and try to do the same. No results at all.

  Day still no 2, but I can't download now...

  Come on guys read it all, it seems that you are lucky, when it works. You must be a programmer if it works.

  My main question is;

  -Is this or Steve Job knew this?  This product is in its Apple store, HP uses the Apple logo.

  -Sell HP t - he produced cheap now and get the money back to test everything print and use the cartridges?

  -Are there hope or solution let this work smooth with what the box and ads tell?

  -J' just forgot a small no and someone give me the solution?

  -In a lot of wine in these days of Christmas?

  Hope someone can help me and get this Photosmart 5510 working (printing, scanning and airprinting it says on the box)

  Hi ShiomiL,

  A tried these last few months, a lot of time to get the HP works as it should work (especially the airprinting and scan) without any success.  We used with IP printing/scanning, which wasn't a problem, but does not give us the full possibility of the HP printer.

  Today I bought an apple Extreme airport, connect and a few seconds later all works perfect

  In the end, so it was the TL-WR741N (the latter replaced by apple airport) that give problems.

  I just wanted you to know and say thank you for the support you give.

• Printing with Macbook Photosmart wireless problem

  I'm not sure if anyone can help, Im a beginner and not very technical so be sweet/patient.

  I bought a HP Photosmart B110, that allows to print wirelessly to a network for my son who just went to College. It has a Macbook and all seemed well with the implementation and test pages printed with all the "Passes" while trying to find the printer on the network no printer showed. I added manually the printer even if the instructions have not really cover how to do this with a variety of menu options such as the LPD, HPJet and intellectual property. I went down the road to intellectual property and were able to get a test page to print, but whenever I try to print a document or scan something I get an error despite initially seeming fine. To do this, what you expect on the first ' print page 1, Page 2, etc. ", but a yellow triangle appears on the printer icon and a message" network host 172.xx.xx.xx is busy will retry in 20 seconds...» 30 dry etc."the Mac can see the printer on the network of the United Utilities to print all come showing the use of ink etc (and as mentioned printed the test page) but I'm really stuck on why I can't get a document to print, can someone point me in the right direction please.

  I do not large companies such as universities allow individuals to add devices to their network, such as printers.  If they allow to connect, it may be that they do not manage the data circulating on the printer.

  In addition, it is a bit dangerous to add a printer to a vast network that anyone can print on it at any time.

  I recommend this printer connected to the computer via USB.

• printing with the mavericks os problem

  My deskjet 932c was working fine until I installed mavericks os (Mac)

  all solutions?

  This printer is still supported?

  Thank you

  Hi markszcz,

  Welcome to the Forums of HP's Support.

  Your printer is certainly one of the older models as it was introduced around the year 2000. The latest HP driver published for this printer is for Mac OS X 10.5 Leopard. However, I have included a document on the installation and use of the printer for the Mavericks.

  OS X 10.9 Mavericks: installing and using the printer on a Mac

  http://support.HP.com/us-en/document/c03967522

• Cannot close the menu copy so we can print with the Photosmart C4580

  HP Photosmart C4580 all-in-One

  By mistake, we hit the button settings label number 3.  We do not have memory installed maps.  The instructions say that this:

  Otherwise, this button opens the copy settings menu.  Our problem is that we cannot close this menu so that we can print.

  We followed a hot and cold reset reset procedures without result.  The User Guide does not mention how to close this setting.

  So, we can now use the printer.  Can someone help us please?

  Thank you very much in advance,

  Yours,

  Sky22

  As I mentioned in the first post, I tried the hot and cold nothing works reset procedures.  I finally came to my senses and remove the printer and let windows 7 install the drivers again.  Then it worked.  I should have done that right away.

• Printing with a Photosmart B209a problems

  I have a Photosmart printer that I bought a year ago. It is wireless capable, but at the time I bought it, I didn't have a laptop. Now I do. I tried to install on my wireless several times, but still, it happens at some point and did not finish. Any suggestions?

  I'll be here until 9 am cst tell me when you get this

• The photosmart c8150 print with the new ipad

  The photosmart c8150 print with the new ipad?

  Hi toddgas1,

  Unfortunately, this printer does not support Airprint or ePrint.

• HPO D5560 not print with the black print cartridge

  Having a D5560 printer which stopped printing with the black cartridge.

  Thought it was the cartridge has installed a new (only use HP cartridges) no difference

  After thinking the Black just stopped - no phasing-out quality, etc..

  Ran the cartridge filter (all levels of cleaning) no difference

  Print well if I remove the black cartridge so that the Tricolor print black but it's only good to work around the problem

  I use this on Windows 8.1. It worked fine for months

  Can't think that I had installed recently HP driver updates

  I have a hardware problem?

  Thanks for any input

  See you soon

  Geoff

  OK, so it's weird.

  Just thought to connect my netbook windows 7 into the printer.

  It print very well with the black print cartridge.

  Sent a work computer Windows 8.1 and now prints fine in black of the black cartridge.

  Problem solved, but I'm losing the plot!

  See you soon

  Geoff

• Each page is printed with the word 'project '.

  CP1525nw

  All the pages I print, regardless of what program I have prints, prints with the word 'project '.   I am went through the maual, reset everything, check the tips here and may not know how to remove this watermark.

  I'm wasting toner, paper and time trying to get it to stop.

  I'm running on Mac Os X Snow Leopard.

  First of all, so much thanks to HP for a quick response.  Sorry you're solution did not work.

  I have check the updates of the system to Snow Leopard.  Behold, an update utility from HP printer (or something) worded as it was available.  Downloaded, installed and restart.  Whalla, problem disappeared.

  Go figure.

• It is necessary to check all documents printed with the Flattener Preview

  It is necessary to check all documents printed with the Flattener Preview before sending it to print?

  Only if they have transparency, and even then is not necessarily, although certainly will tell you what is happening to interact. I would not hesitate to consult the overprint preview, however.

• Red spots on the skin when printing with the HP PhotoSmart 8400 printer

  I am trying to print a JPEG image that is very high resolution (3000 x 2000) and the quality is superb on my monitor.

  However when I try to print on my HP PhotoSmart 8400 printer there is a strange red 'sand' pattern (pixelation) that appears on the skin of most of the bodies of the subjects. I did the test the page and sample page that look ok, but does not use the same colors and has not any skin tone (it's a picture of Orchid).

  I tried this on glossy paper and regular paper, and it seems to pretty much the same, with the effect more pronounced on glossy paper. I also tried to change the image in several different ways, including lowering the resolution, changing colors and adding a blur gaussing, but cannot get rid of the strange grainy effect.

  Can you get it someone please let me know if it is a common problem with the device, or if my photo is somehow wrong? If Yes, where can I get a picture called to test the printing of skin tone, or how can I solve the problem.

  Thank you!

  Update: I tried with another photo on the web and I see the same effect. Given that this printer is a few years old I start thinking that it's just a physical limitation of the printer.

  Found problem - I replaced my cartridge 99 and that fixed it.

  I didn't expect this type of behavior because of the low level of ink, but I guess there is a first time for everything ():

• Photosmart B209a more: with the Scanner B209a problem...

  I've already read so many threads on the HP forum. No and then save me.

  I have win7 64 bit and B209a Photo Plus...

  My is simple: I have this pop up: "the HP imaging device is not found. Try the following steps. "etc. The steps do not work. Extended error information gives 8, [(1.0,-2147221502)]."

  I unstall this unit 8 times I reinstall delete %Temp%, but the problem persists, I have already addressed on delete and %Temp%, repair setup/scan/scan.exe and install. Tried the "fix it", but I can't find the file "bdp_scan". Nothing fix it!

  It seems that my scanning device was already installed before my installation. How to remove this old installation scanner?

  Thank you

  I solved my problem, NO thanks to HP. Thanks for me!

  HP support will serve only a consult...

  The driver has been corrupted, corrupt yourself, an incompatibility with daily updates of Microsoft, I do not know what upgrade but here is the solution.

  I changed the group from my home network to the public, that the public at home, that the printer was visible on the HP program. So I uninstall all HP programs and use the driversweeper to clean all.

  That, I install the complete program with the HP driver as administrator and in compatibility win mode 7 (as I said, I use win7).

  SOLVED by myself.

  HP abandons us, I have a high end of my time printer and don't bother HP (it's time laugh you!) HP CARE)

  You guys make a driver and programs more accessible Microsoft and compatible! Tha'ts started too much programming at the end as it is, is simply take the best, see for the snippet of microsoft that the discovery of your printer and install, when YOUR programs don't.

  Thank me (no thank you)

• I have a problem with printing with the Brother HL-5250DN printer.

  I ran out of paper and replaced the tray and the paper and tried to resume printing, but received a red light.  Since that time I have not been able to print.  I tried over and over any paper jam, then reinserted everything several times, I tried reloading - still not printed.  My computer says that it is ready to print and a print request in Quebec, but the printer stay stoic with the Green ready lite on.  I removed the cable from the printer and placed in several ports - no change.  Can anyone offer any suggestions?

  I ran out of paper and replaced the tray and the paper and tried to resume printing, but received a red light.  Since that time I have not been able to print.  I tried over and over any paper jam, then reinserted everything several times, I tried reloading - still not printed.  My computer says that it is ready to print and a print request in Quebec, but the printer stay stoic with the Green ready lite on.  I removed the cable from the printer and placed in several ports - no change.  Can anyone offer any suggestions?

  Hello

  I recommend that you completely uninstall / reinstall the printer.

  Go to the following site.

  Brother International - support for your Brother product:
  http://www.brother-USA.com/support/ModelInfo.aspx?R3ModelID=HL5250DN

  You will find all the information on this page how links.

  First, look for any known issues with this device using your version of windows.

  Download the latest driver for your version of windows.

  Follow the instructions to uninstall the printer.

  Restart the computer.

  Follow the instructions for the installation of the printer.

  If this does not resolve the problem, use the contact information on this Web site.

  Concerning

• Photosmart HP 5510 fails to print with the nine 364XL black ink cartridge

  The black cartridge HP 364 "SETUP" origin has worked well and I bought a black cartridge HP364XL via the HP Web site.

  I installed the HP364XL this morning, but he is unable to leave the necessary ink on the pages.

  The cartridge seems to be OK and there is no error message.  The paper passes through the usual way, but fate with no print on it.  The date on the box is September 2014, this is not out of date.

  I tried to find what the problem is.  I checked the cartridge is correctly installed and it seems to have ink inside.   I tried to print using the black cartridge again and again with different parameters, such as 'Fast draft' and 'Normal', but every time the paper emerges with no impression.  The 'supply levels' shows the black cartridge about 90% full.

  This is normally caused by the vent on the top of the cartridge being blocked, or a dirty print head. The document below will help you work out the problem. Let me know what happens.

  Black ink is missing on printouts

• Problems printing with HP Photosmart Plus 209 PDF documents has

  Sometimes, when I try to print PDF documents, one or two sheets will print then the printer will just stop.  It turns on and the message window says something like "to avoid damage, use the button 'on' close ' my husband has this same printer and the same thing happens.  I am running Windows 7, Vista, he is a candidate.  Is there a solution?

  Note that this does not occur with each PDF, some.  I was not able to find a common denominator between those who print correctly without any problem and those who are not.

  Thank you!!!

  Get a copy of Foxit a free PDF reader and try to print.