Printing with Macbook Photosmart wireless problem

Similar Questions

• Printing with a Photosmart B209a problems

  I have a Photosmart printer that I bought a year ago. It is wireless capable, but at the time I bought it, I didn't have a laptop. Now I do. I tried to install on my wireless several times, but still, it happens at some point and did not finish. Any suggestions?

  I'll be here until 9 am cst tell me when you get this

• Printing with the Photosmart 5514 problem!

  I have a Photosmart 5514 and have just started using it and I probably did something wrong as a beginner and I need help to solve the problem.
  How can I remove printing pending to be executed? I don't know why there is a print job in the queue and when I put in the book, nothing happens.

  Thank you very much

  Jeff

  I'd take a glance on the document below it will show you how to remove jobs from the queue.

  Click here for the document.

  Let me know how it goes.

• Problems when printing with USB or wireless - offline message

  Hello world

  I use a HP ENVY 4500 with a laptop Acer Aspire laptop and a desktop computer HP Pavilion 500, both with an Intel i7 and Windows 8.1. Initially, I configured the printer to work with both PCs wireless. The wireless network is provided by the modem of my provider (Telenet), so it is not very strong I increased it with Devolo powerline adapters. Print is fine, only when I want to print more pages then 3 print job is stopped in the middle of page 4. I get a message that the printer could not print the document, and the page comes out half print. I connected my printer with a USB cable and configured to work with USB, but also wireless. But that Don t always works, today, I tried to print a document from Mozilla Firefox and it would not start. The printer can be used on both sides without choosing the connection?  Also I get the message that the printer is offline and cannot print the document, even if it's actually printing.

  When I open the doctor print & scanning everything seems to be ok wth the printer, no defects are detected. Wrong me?

  Hello @DenOuwe and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you run into connectivity errors.  I would like to help.

  I would recommend using this thread on missing/partial prints & printer offline on Windows 8/8.1. by @JERENDS

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• HP 6830 can be configured to print with USB and wireless?

  a provide you with similar instructions to put in place the USB and use wireless to my hp 6830 on an iMAC running on OS X Yosemite 10.10.5?

  Hey @kj6311,

  Welcome to the Forums of HP Support!

  I see that you want to install your HP Officejet Pro 6830 e-all-in-one printer via a USB cable connection and the connection Wireless on your computer Mac OS X 10.10. I want to help you with this today. Can I please you follow the steps below.

  Step 1: Set up the device:

  To begin, we will set up and install the version without wire of your printer.

  1. On the front panel of your printer, swipe, and then select Network Configuration
  2. Select the wireless settings
  3. Make sure that Wireless is enabled
  4. Then choose Wireless Setup Wizard
  5. Select your network name (SSID)
  6. Enter your wireless password. Is case-sensitive.
  7. Once the wireless connection has been configured on your printer successfully, proceed to the next step.

  Step 2: Install the wireless device:

  1. Please click here to download the latest driver for Mac OS X 10.10 for your printer
  2. Run the network installation
  3. Once the wireless installation completed successfully please try wireless printing to confirm that your printer works via the wireless connection. Once tested, please proceed to the next step.

  Step 3: Install the USB device:

  Please connect the USB cable from your printer to the computer.

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan and then check if the name of your printer appears in the printer list.

  3. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  4. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Officejet driver is selected.

  

  5. in the 'name' section, add USB until the end of your name of the printer so that you can make the difference between the two Officejets.

  6. click Add to add the printer to the list.

  Now you should have two copies of your printer showing under Print & Scan. Please let me know if the steps to solve your problem. Good luck!

• OfficeJet 4500 wireless do not print with MacBook 10.5.8

  The device will scan wireless but will not print wireless or to the USB with the Macbook. The wireless shows the file sent, then after a few seconds clears the queue and poster printer ready, despite no action at the printer. Try USB port it hangs just showing printer busy, status: 0xe00002e9. The printer works on USB with an iMac. I have uninstalled and reloaded several times from the disk and downloaded the drivers on the HP site, which none worked. Any suggestions for how to get printing to work?

  Hello

  Is the 0xe00002e9 appears on the front panel of the printer or on Mac OS?

  If the error appears on the computer screen, I also suggest you try reset the Mac printing system:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  In the Apple menu, click System Preferences.
  On the view menu, click Print & Fax. Dialog print & fax opens.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now, click on the sign more, select the printer in the list and try to print again.

  Is there a difference?

• Problems printing with HP Photosmart Plus 209 PDF documents has

  Sometimes, when I try to print PDF documents, one or two sheets will print then the printer will just stop.  It turns on and the message window says something like "to avoid damage, use the button 'on' close ' my husband has this same printer and the same thing happens.  I am running Windows 7, Vista, he is a candidate.  Is there a solution?

  Note that this does not occur with each PDF, some.  I was not able to find a common denominator between those who print correctly without any problem and those who are not.

  Thank you!!!

  Get a copy of Foxit a free PDF reader and try to print.

• Problem printing with HP Photosmart 7520

  My printer says "printer offline" on my Photosmart HP 7520 and I can't print. I use a Sony Vaio and Windows 8... Please help, this is driving me crazy!

  Hello

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

• Is no longer able to print from MacBook Pro Wireless to wired C7280

  I've been grafted this on an existing thread, thinking it was the same question.  Looks like it was something else now, so I thought I should probably for this spin-off on its own thread.

  Details:

  Printer: The Photosmart C7280 all-in-One, connected to the network via Ethernet, IP 192.168.1.5 (confirmed with the network Menu > view network settings > display wired summary)

  Router: Verizon/Actiontec MI424-WR (Verizon FiOS) with

  * Ethernet ports

  * 802. 11B and 11 g with WPA encryption

  Desktop computer: iMac with Mac OS 10.5.8, Ethernet connection.  I initially installed the HP from the CD software when we arrived the 7280 a few years ago, but we've probably updated since then.

  My laptop: MacBook Pro with Mac OS 10.5.8, WiFi.  I think that the HP software has been downloaded originally from hp.com (rather than the original CD).

  Mobile woman: MacBook with Mac OS 10.6.3 free Wi - Fi.  Downloaded HP software from hp.com.

  We have been able to print from laptops on the 7280 until several days ago.  After that, whatever it is sent by laptops remained on the queue of the printer without any reaction from the printer, even after the usual stuff (electric bike on printers, printers pausing and unpausing, holding jobs and unholding, etc..)

  Our laptops seem to lose wireless connection a bit more frequently than normal, and at first I thought it was the problem.  Lately, however, can't do anything to print even when wireless connection remains strong.  I can print from iMac, however.

  As stated above, my wife MacBook has 10.6.3, so I'll try instructions on other threads to uninstall the HP software and using the built-in 10.6 drivers.  If I can lift the MacBook from my wife long enough :-)

  During this time, I tried to troubleshoot my MacBook Pro.  I can ping 192.168.1.5, and I can pull up the printer web page by entering '192.168.1.5' in my web browser.

  So I followed the instructions here:

  e http://h10025.www1.HP.com/ewfrf/wc/document?docnam = c01893662 & tmp_task = solveCategory & lc = en & dlc = en & c...

  (title: Mac OS X: print jobs are stuck in the print queue and Will not print on a network product)

  I followed the Solution 1 (remove and readd printer) until I got to steps 7 and 8.  The printer has not been automatically added to the list of printers, so I clicked on the Add button, but was not able to choose my printer in the list.  Some information contained in Solution 2 seemed to hint that I had a connectivity issue and suggested that I look for network connectivity solutions.  Unfortunately, all network connectivity as Windows-specific utility called FAQ, so I decided to uninstall the HP software (using Uninstall HP).  I downloaded HP_Installer_PSC7200_v9.7.1.dmg to hp.com and ran to her, but here's what happened:

  • To step select the device, no device appears even if the printer is turned on and on the network.  (As noted earlier, I can ping it.)  I checked "my device is not listed" and clicked on continue; When "Photosmart C7200 series" appeared, I chose it.
  • In the subset "Select device connection", I chose "network". (The "device" in this question is the printer - right?)
  • I went through the step of the installation.
  • No device has been registered at the configuration stage.  I have it handled in the same way that step select the device ("my device isn't", continue, click on 'Photosmart C7200 series' continue, 'Network', continue.)
  • This time, I got this dialog box: "If your device is not listed, it is not supported by the installer.  Please visit www.hp.com/support to download an installer, if available"even if it was the correct Installer for C7200 and Mac 10.5.

  I forgot something?  What should I try next?

  It seems that the printer is OK and that it is on the network.  You can optionally set a static IP for it, but we will do things first.

  The first thing I would try would be to reset the printing system on all the Macs in the problem:

  -Sys Prefs, Print & Fax
  -Right (Ctrl) click the box of the print queue and select Reset Printing System.
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  If it's not it there may be something to do with the router.  I have some ideas, if necessary.  Let me know.

• Programs crash whenever I try to print with HP Photosmart C4750.

  I use Microsoft Office 2007 and Windows Vista (home). I just installed the driver for the printer HP Photosmart C4750, but I can't use it because everytime I try to print, the program that I try to print from crashes. I tried Microsoft Word and Notepad. In addition, I tried to go to Control Panel then 'printers' to try to remove the printer and then re-add, but as soon as I click the icon 'printers', Microsoft Explorer crashes too. I connect to the wireless printer. There is another user who is using this printer wireless and it works for them, and I do not believe that they are also using Windows Vista. I also tried turning off all protection antivirus and firewall, hoping that he would do something, but nothing is done. Please let me know if you have any advice. Thank you!

  Hello moonsparkle,

  The spooler crash when trying to open delete them the printer is a clue that you might have corrupted printer drivers.

  You can try the methods below to resolve this issue.

  Method 1:

  I suggest that you run the printer Troubleshooter that diagnoses and repairs printing problems automatically:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2:

  Find the defective module that may be causing the application to crash when you try to print. You can start from the analysis of event viewer.

  You can consult the following article which will help you with this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  You can see the link which will help you analyze the entries below Event Viewer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  You can also post the entry in your response if you have difficulties to find errors.

  Method 3:

  If nothing works, I suggest you reinstall the printer drivers. You can uninstall the printer from Device Manager drivers or uninstall the Photosmart software and try to reinstall the drivers.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Printing with the photosmart 5510 and MAC 10.7.2 is a dream? and I don't even go to part scanning

  Wauw, buy a photosmart HP 5510 printer and you are very busy for Christmas together to print wireless?

  Unpack your photosmart 5510 and install?

  Well, it prints 1 page and then you get the message printer isn't ready if you want to print your next page.

  1st day, I try with my own knowledge.

  
  

  Updates

  Reset the router.

  Work with difficult IP put in the printer.

  Change the IP address via the Web interface.

  Change the settings of the router

  Try to reinstall the software which is not even possible that most all do the manual says that it is.

  Still 1 print and then nothing. Reset the printer or change the IP in the difficulty of the printer, labour, still 1 print or scan or 1 airprint but then nothing.

  (printed about 35 pages of BS as test)

  Day no. 2, new day of new towers

  Looking around the God thank you forum I'm not the only one who has this problem.

  A lot of people, same problem, some struggle for 6 months, contact support without success.

  Damm scan I even was going to this party and look at all the users having problems. Allow me to first impression please.

  And right now, it looks resolved advice and try to do the same. No results at all.

  Day still no 2, but I can't download now...

  Come on guys read it all, it seems that you are lucky, when it works. You must be a programmer if it works.

  My main question is;

  -Is this or Steve Job knew this?  This product is in its Apple store, HP uses the Apple logo.

  -Sell HP t - he produced cheap now and get the money back to test everything print and use the cartridges?

  -Are there hope or solution let this work smooth with what the box and ads tell?

  -J' just forgot a small no and someone give me the solution?

  -In a lot of wine in these days of Christmas?

  Hope someone can help me and get this Photosmart 5510 working (printing, scanning and airprinting it says on the box)

  Hi ShiomiL,

  A tried these last few months, a lot of time to get the HP works as it should work (especially the airprinting and scan) without any success.  We used with IP printing/scanning, which wasn't a problem, but does not give us the full possibility of the HP printer.

  Today I bought an apple Extreme airport, connect and a few seconds later all works perfect

  In the end, so it was the TL-WR741N (the latter replaced by apple airport) that give problems.

  I just wanted you to know and say thank you for the support you give.

• printing with the new wireless router

  I have a HP 8600 printer. How can I change the printer to recognize a new router. I printed the configuration page and the new router is on the list but I can't find where to change the printer so it will use the new router

  Hi @riverfront36

  I can help you set up your 8600 with your new network. Please use the following document to solve the problem and I would like to know the results of your efforts; Connection of the printer after you have changed your wireless network.

  I hope this helps.

• Printer with Vista Home Premium problems

  I'm having a terrible time getting my HP printer to work.  My daughter has disassembled the computer and back together.  Both have been done with my permission and supervision, BTW.  Connect the power supply of all equipment is fine, startup is very well, everything seems to work fine except my HP printer. He has not worked since the computer was disassembled and put back together.  Uninstalling and reinstalling both get hung up and won't be finished.  My HP printer will a the printer section in Device Manager.

  HP told me to do all sorts of things, but none solves the problem.  I have disabled firewall during installation.  I disconnected my cable internet connection during the installation.  I had to delete some registry files that will not remove during uninstall.

  I'm so frustrated that I took out an old Lexmark printer that will not install correctly.  The Lexmark printer for some reason any settles in the Device Manager in the section "other devices" with a question mark and will not create a section of the printer.  Then of course, it is not the printer.  There must be something else in Vista that I'm missing that prevents a correct installation.

  The first day, I bought my HP printer, a 6310 all-in-one, my printer installed and worked fine.  Just did not work since my daughter put our computer together.

  Our Hitachi DVD-rom will not quite work, either.  The music can be played, CDs and DVDs can be played, but burning does not work.

  Any help would be appreciated.

  Thank you

  Patty

  Hi again Patty,

  I have a few questions for you.  You said "Everything in the file zip, except the pilot, moved."  When you double-click on the zip file, an installation routine starts then, or is it just unzip the files somewhere?  If you look at these files, do you see any facility named, or any executable?  If so, double click on setup to start the installation.  If this is not the case when you are installing the printer via the Control Panel, select 'have disk', then access the dirctory files are uncompressed in and who should install the driver.

  You mentioned that you did a restore of the system, but can return only 10 days.  Never has that take you back to this problem before?  For more than two weeks we last talk.

  Updates can be removed through the Control Panel, programs, programs and features, view the updates installed (left).  Unless you're of course update you want to delete, I wouldn't get rid of them at random.

  You can consider a reinstall of Windows Vista.  If the method above does not receive your printer doesn't work, then something is wrong or damaged.  The fact that this all started when you took the lid of the machine has always wonder if we also have a hardware problem. Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot close the menu copy so we can print with the Photosmart C4580

  HP Photosmart C4580 all-in-One

  By mistake, we hit the button settings label number 3.  We do not have memory installed maps.  The instructions say that this:

  Otherwise, this button opens the copy settings menu.  Our problem is that we cannot close this menu so that we can print.

  We followed a hot and cold reset reset procedures without result.  The User Guide does not mention how to close this setting.

  So, we can now use the printer.  Can someone help us please?

  Thank you very much in advance,

  Yours,

  Sky22

  As I mentioned in the first post, I tried the hot and cold nothing works reset procedures.  I finally came to my senses and remove the printer and let windows 7 install the drivers again.  Then it worked.  I should have done that right away.

• Printing with Acrobat Reader DC problem

  I am responsible for my company and user including myself is wrong print PDF with Acrobat Reader DC.

  Sometimes when you print it out Document PDF with Acrobat Reader DC the document print most with spot on a part of the text from right on the page.

  It's probably a problem with the police as the finger only where the text should be.

  If I print to the printer even with Acrobat Pro XI of the same document is ok. I'm the only user with install Acrobat Pro XI.

  We experience this problem since all the computer receives the update to Acrobat Reader DC.

  We have an HP Color Laser Printer and Ricoh multifunction printer. All users have Windows 10 Pro (the same problem has happened before with Windows 7).

  Is there a solution or need to install the previous version of the Acrobat Reader software on all computers.

  Thank you

  Pierre Paquette

  Hi pierrep80629097,

  Could you please let us know the version of Adobe Reader is installed on the machine?

  Is it possible to post a screenshot here, post a screenshot here in the forums, please visit this link: https://forums.adobe.com/docs/DOC-7043#jive_content_id_How_do_I_attach_a_screenshot

  Try to print the pdf as image file, in the print dialog box > select your physical printer from the drop-down options menu > select Advanced > check the print as Image > and click OK.

  Thank you

  Shivam