prints a page with "GET /DevMgmt/DiscoveryTree.xml HTTP/1.1 Host: 127.0.0.1:8080".

Similar Questions

• Pages with "GET /DevMgmt/Discoverytree.xml HTTP/1.1" unwanted printing on HP 2055dn

  Print pages with GET /DevMgmt/Discoverytree.xml HTTP/1.1

  Host: xxx.x.x.x:xxxx (IP address

  It comes from occurring with HP LJ 2055dn

  Anyone know how to PREVENT what is happening in order to avoid the waste of paper?

  There are a LOT of people posting on this problem WITHOUT help from HP support online!

  Common problem: using Win7 (32/64 bit) version with current driver from CD.

  Install the latest driver from HP.com does NOT solve the problem!

  Any ideas?

  Thank you!

  Here is how I solved the problem, at least for me

  -Goto printer and select HP 2055dn (currently using "PCL6" pilot)

  -Right click and select "printer properties".

  -Goto "the device settings tab.

  -The "Installation Options" settings Goto

  -Duplex: installed

  -Notification of printer status: DISABLED CE IS PROBABLY THE CULPRIT!

  Press 'OK' to accept!

  This solved the problem, at least for me

  Good luck!

• Pages with "GET /DevMgmt/Discoverytree.xml HTTP/1.1" unwanted printing on Laserjet 2015b

  I have a HP Laserjet 2015 d in WIN7 (32 bit) with a USB connection.  I keep getting unwanted with pages printing:

  "GET /DEVMgmt/Discoverytree.xml HTTP/1.1".

  "Host: 127.0.02:8080".

  I found similar positions to the other HP LaserJet but their repair method did not work for me, because I don't have an option "Printer Status notice" which is noted below.

  --------------

  (repair method mentioned in another post for the 2055dn printer)

  Please click on start-->

  Printers and devices-->

  Double-click the printer (PCL 6)

  Double click on customize your printer

  Click device settings, and then check the list and together following: -.

  Notification of printer status: DISABLED

  Apply

  Ok

• CP1515n, print a report after each print job "Host IP & GET/DevMgmt/DiscoveryTree.xml HTTP/1.1"

  Hello

  I have a HP color laserjet CP1515n. every time I give a print job prints a status page with two lines just like this

  "GET/DevMgmt/DiscoveryTree/.xml HTTP/1.1".

  "Host: 127.0.0.1:8080".

  I tried to disable it, but I am not able to to please help as it is using paper and ink at the same time.

  Thanking in advance

  Naeem

  Hi ANM

  Thanks for the post.  With this error, I was able to locate a previous thread that addresses this problem.  I've included this link below.   Good luck!

  Mr.Mojo thanks for the information!

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/unwanted-pages-printing-with-quot-get-DevMgmt-Discoverytree-XML/TD-p/863739

• More on unwanted Pages print "GET /DevMgmt/Discoverytree.xml HTTP/1.1" on HP 2055dn

  I have this same problem with my new P2055dn.  I have studied the problem.  What happens to any driver that I use.  (I now have three people on board, each fully updated.  They are universal, PCL 6, PCL 5 v.5.4, so Microsoft XPS Document Writer).  I also disabled reports in the printer menu.  Yet, I get this printed page several minutes after each print job is finished.  I am running Windows XP.  I really hope that someone can help;  It seems really stupid, and I don't want to have to live with it!

  Problem seems to be resolved.  I use the universal driver (No PCM 5 or 6), with reporting disabled.  This is the configuration that I got when I wrote my original post.  I wrote because the printer DID print that report sheet at least once and maybe twice, with this configuration in place.  Multiple print jobs is completed since then, without any additional reports ongoing print!

  Given my experience, I suspect that other users will benefit from reviewing the several threads available on this topic.  HP, you must fix this so that the printer works out of the box!

• GET printer error /DevMgmt/DiscoveryTree.xml

  Anyone received this error message, the /DevMgmt/DiscoveryTree.xml you GET printer? I have a HP Color LaserJet CP2025n

  If you're still having problems with printing on both sides, try this:

  Devices and printers, click the P2055dn icon, the printer's properties device settings tab.  Scroll to the duplex unit.  If it is set to not installed, click the sentence not installed then installed in the menu dropdown.  Press OK.  After you have selected the print for a specific job, select properties and change print on both sides from no to Yes, lift on or toward Yes Flip.  Most users know to do this last step, but the choice is only there if you have set the duplex unit to installed.  I got this solution a post in another forum.  Good luck.

  I am still among those who cannot get the Toolbox and get GET DevMgmt error message, but I can print duplex!

• When I try to print a page, I get the entire page of very low, either I get only part of the page. Which setting I'm missing?

  I am trying to print a page of a web page. If I check, 'reduced to fit' print / page setup, I get the whole page but small enough to be useless. If I uncheck 'reduced to adjust', I get only about 1/3 of the page. I tried the % function, and it only changes the size of the narrow portion I see already. How to print the whole page in a reasonable size?

  If Firefox does not use the entire sheet of paper, it can result from Firefox after having extracted the Windows incorrect paper size settings when reading data from the print driver. Compensation it may involve conclusions some mask parameters, but here goes:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste print and make a pause so that the list is filtered

  (3) for each parameter which specifically mentions the problem printer, right click and reset The fastest way is to click with the mouse and press the r key on the keyboard with your other hand.

  Note: In a few discussions involving Brother printers, printer_printer_name.print_paper_data preference was established in 256 and when the user changed it to 1 which, in itself, solve the paper size. If you are using a Brother printer and see a 256 here, you can change the value by double-clicking it or by using the right click > modify.

  Any improvement?

• RTF, see Printing first page with check Tray1 and other pages in tray 2

  Hi Experts,

  One of our customers is to have a condition where there are several checks with the corresponding invoices in the competitor program the output PDF.

  The first page contains tick down - stab this first page is printed by selecting from the Tray1.

  the remaining pages (with control)-all of these pages are printed by selecting from the bac2.

  the output PDF contains several cheques.

  all entries are appreciated...

  Best regards

  gt1982

  We do not know how many bills we get for the cheque, it is difficult to find a solution for this kind of requirement.

• Can I REALLY print web pages with ePrint?

  I want to buy an ePrint printer. I know that I can print static web pages with my iPad via ePrint.
  But can also print dynamic web pages, or pages that I see after my login on my bank account?

  Example of dynamic web pages: http://drawisland.com/ or https://www.draw.io/
  Go to this page and draw something. You can print it via AirPrint?

  Thanks for any help or advice!

  Hello

  Did you ask an Airprint printer? For locations above, Yes. Any printer can print, but not all printers can use Airprint. One thing I want to mention here, printer will print the ENTIRE page. They allow you to save the drawings, you can save and print later.

  Kind regards.

• Automate printing odd pages with page 2

  I want to print all the odd pages with page 2.

  In this order, 1,2,3,5,2,7,2,9,2,11,2,13,2,15,2,17,2,19,2,21 etc.

  Basically, 1,3,5,7,9,11,13,15,17

  And insert a 2 between each of them.

  Can do it with GREP - not a practical solution in the long term.

  Someone at - it a clever way to do this in Excel?

  Eugene,

  Do you mean you want a formula with an Excel file? Like this:

  

  For example, I want to print pages 1 to 57. Then I select the B-29 cell and copy it!

• HP DesignJet T120 prints blank Pages with software of CAD DraftSight

  Hello

  I grew up this question with the DraftSight support as well.  They are currently studying the issue, but I doubt very much they can do about so I wanted to get feedback from the HP support as well.  Basically, the problem is that I can't print using the HP DesignJet T120 and CAD software free DraftSight.  The job is sent to the printer, but the pages come out blank.  I was hoping that if someone can also confirm this behavior or help me solve the problem.  Here is some information on my situation:

  1. I can print other software for the T120

  2. I can print draftsight on another printer (Toshiba e-Studio 281)

  3. my system configuration:

  -Windows 7 x 64

  -Printer connected via usb

  -Use the latest printer drivers for T120 (61.124.1518.100)

  -DraftSight V1R3.1 x 64 http://www.3ds.com/products/draftsight/download-draftsight/

  4. I tried the method of pilot alternative described in http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers-e-g-Windows-8/How-to-Assign-Alterna...

  but it is not really one another driver I can choose.

  I appreciate all the help and feedback!

  Thank you!

  I'm linking you the Designjet forums below. Please just transfer your question on the forums of Designjet.

  Designjet forum

• How to print only pages with field data

  Hypothetical scenario:

  I have a doc with 10 pages, and each page has 10 fields.  These 10 fields, I would to implement a solution when the document is printed:

  1. a script that analyzes the first field in each page, if the value of! = null then include this page in the print operation, or

  2 script scans all fields on each review page for the first field with data (among the 10 fields). If one of the 10 has areas of data, then include this page for the print operation. I-frame, this would be some kind of script loop (for, while, etc.)

  I'd love to run the #2 option, but it should be #1 if it's easier to implement.

  I sincerely thank anyone in advance for any advice, suggestions or recommendations.

  Hello

  Take a look at an example here: http://assure.ly/MzX1bK. This will satisfy option 2.

  Hope that helps,

  Niall

• Print a page with text, image and datagrid

  I have an AIR application.

  I want this app to print a set of text, image and datagrid.

  I thought that of about in 2 ways:

  -create html file, so the application writes just the text in a file. Then the application can open it with the native browser but I don't know that it can print the HTML interpreted.

  -Add text, the image and the datagrid to a Sprite and print with PrintJob. But then I think that I can't use flex layout to create the page.

  How would you?

  Why not use PrintDataGrid and FlexPrintJob?

• How to print the page with dvt:graph?

  Hello
  
  I have a jspx with two graphs (Imagetype = flash) and I want to just print the whole page as shown in the browser.
  I tried the file-> print but instead graphics is printed in white.
  
  Is it possible to do?
  
  concerning
  Peter

  Peter,

  do you have the graph to display as an image? Especially active graphics could make in flash, that prints well. There is an API to print in deep venous thrombosis and you can find an example here

  Print Gantt chart

  Frank

• Try to print a page web - get error: e10s print is not yet implemented. Bug 927188. New problem, just started this week.

  I can print OK in IE, just don't like tp use it.

  See also:

  • https://wiki.Mozilla.org/electrolysis
  • https://wiki.Mozilla.org/electrolysis#Known_Issues