GET printer error /DevMgmt/DiscoveryTree.xml

Similar Questions

• CP1515n, print a report after each print job "Host IP & GET/DevMgmt/DiscoveryTree.xml HTTP/1.1"

  Hello

  I have a HP color laserjet CP1515n. every time I give a print job prints a status page with two lines just like this

  "GET/DevMgmt/DiscoveryTree/.xml HTTP/1.1".

  "Host: 127.0.0.1:8080".

  I tried to disable it, but I am not able to to please help as it is using paper and ink at the same time.

  Thanking in advance

  Naeem

  Hi ANM

  Thanks for the post.  With this error, I was able to locate a previous thread that addresses this problem.  I've included this link below.   Good luck!

  Mr.Mojo thanks for the information!

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/unwanted-pages-printing-with-quot-get-DevMgmt-Discoverytree-XML/TD-p/863739

• Pages with "GET /DevMgmt/Discoverytree.xml HTTP/1.1" unwanted printing on Laserjet 2015b

  I have a HP Laserjet 2015 d in WIN7 (32 bit) with a USB connection.  I keep getting unwanted with pages printing:

  "GET /DEVMgmt/Discoverytree.xml HTTP/1.1".

  "Host: 127.0.02:8080".

  I found similar positions to the other HP LaserJet but their repair method did not work for me, because I don't have an option "Printer Status notice" which is noted below.

  --------------

  (repair method mentioned in another post for the 2055dn printer)

  Please click on start-->

  Printers and devices-->

  Double-click the printer (PCL 6)

  Double click on customize your printer

  Click device settings, and then check the list and together following: -.

  Notification of printer status: DISABLED

  Apply

  Ok

• prints a page with "GET /DevMgmt/DiscoveryTree.xml HTTP/1.1 Host: 127.0.0.1:8080".

  I have 2 HP Printers, HP 6600 - no problem!  and main printer HP Color LaserJet 1515n

  This printer is in a limited network, and each print job, at the end of the job, print a separate page with the following:

  "GET /DevMgmt/DiscoveryTree.xml HTTP/1.1 Host: 127.0.0.1:8080".

  HOW ON EARTH CAN I GET RID OF THIS AND THAT WHICH IS THE CAUSE?

  Tony [personal information deleted]

  Paul, to solve this problem, you must disable the "Notifications of State printer" in the printer driver settings.

  To do this, assuming you are using Windows 7, the first thing you need to do is to go into your control panel.

  Once there, select 'View devices and printers' under 'hardware and sound '.

  Right-click your printer, and then select 'Properties' or 'printer properties '.

  Select the "Device settings" tab and you should see the option to turn off 'notifications of State printer '.

  

  If I was helpful, or if you want to say thanks you can click the White Star under my name to give me congratulations.  I really appreciate it!

• Pages with "GET /DevMgmt/Discoverytree.xml HTTP/1.1" unwanted printing on HP 2055dn

  Print pages with GET /DevMgmt/Discoverytree.xml HTTP/1.1

  Host: xxx.x.x.x:xxxx (IP address

  It comes from occurring with HP LJ 2055dn

  Anyone know how to PREVENT what is happening in order to avoid the waste of paper?

  There are a LOT of people posting on this problem WITHOUT help from HP support online!

  Common problem: using Win7 (32/64 bit) version with current driver from CD.

  Install the latest driver from HP.com does NOT solve the problem!

  Any ideas?

  Thank you!

  Here is how I solved the problem, at least for me

  -Goto printer and select HP 2055dn (currently using "PCL6" pilot)

  -Right click and select "printer properties".

  -Goto "the device settings tab.

  -The "Installation Options" settings Goto

  -Duplex: installed

  -Notification of printer status: DISABLED CE IS PROBABLY THE CULPRIT!

  Press 'OK' to accept!

  This solved the problem, at least for me

  Good luck!

• MF4100 Windows 7 gets printing error

  I had to reload the printer driver once my hard drive crashed. Now, I get a print error whenever I try to print a test page.

  Hi Fuzzydan!

  I'll be happy to help you with this problem.  I recommend you to uninstall and reinstall the drivers.  Please, disconnect the printer from the computer and follow the instructions below:

  1. disconnect the USB cable from your MF4150.

  2. click on [START] on the Windows task bar, select [(tous les) programs].

  3 select 'Canon', 'MF4100 series' (or MF4150 series), then select "uninstall."  The window of uninstall drivers MF opens.

  a. Select 'delete '.

  b. click 'Yes' to confirm the uninstall.

  c. click 'Quit' (or restart).

  4 restart your computer.

  Once you have restarted your computer, please follow these steps to download and install the drivers from the Canon Website:

  1. visit our web site at: http://www.usa.canon.com

  2. After you click SUPPORT & DRIVERS in the upper right corner, select your model in the following way:
     
  a. in the first menu, CONSUMER & HOME OFFICE.

  b. in the second menu, select PRINTERS & MULTIFUNCTION.

  (c) in the third menu, select your IMAGECLASS series.

  d. in the fourth, click on DRIVERS & SOFTWARE under imageCLASS MF4150.

  3. your operating system will be automatically selected.

  4. click on "DRIVERS", then click [Windows 64-bit] imageCLASS MF4150 MFDriver file to download the driver.

  5. click on I agree - begin download on the next page.

  6. when the Save as appears, select Desktop and click Save.  Once the backup file, click [run].

  Is the file that you download from the Canon Web site. ZIP file.  When you select [RUN], he unzips the installation folder.  Leaving to unplug the USB cable, please follow the instructions below to install the printer:

  1 open your folder [Download].

  2. you will see two icons with the name: MF4150_MFDrivers_W64_us_EN.exe. Double-click the yellow folder icon with this name.

  3. in the folder, you will see two lists for [Setup].  Double-click on the [Configuration] that has the type as [Application].

  4. the "drivers of the MF configuration wizard" will open.  The steps and restart the computer.

  5. after restarting the computer, connect the USB cable and allows you to complete the installation.

  6. print a document.

  I hope this information is useful for you.  If you need assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• More on unwanted Pages print "GET /DevMgmt/Discoverytree.xml HTTP/1.1" on HP 2055dn

  I have this same problem with my new P2055dn.  I have studied the problem.  What happens to any driver that I use.  (I now have three people on board, each fully updated.  They are universal, PCL 6, PCL 5 v.5.4, so Microsoft XPS Document Writer).  I also disabled reports in the printer menu.  Yet, I get this printed page several minutes after each print job is finished.  I am running Windows XP.  I really hope that someone can help;  It seems really stupid, and I don't want to have to live with it!

  Problem seems to be resolved.  I use the universal driver (No PCM 5 or 6), with reporting disabled.  This is the configuration that I got when I wrote my original post.  I wrote because the printer DID print that report sheet at least once and maybe twice, with this configuration in place.  Multiple print jobs is completed since then, without any additional reports ongoing print!

  Given my experience, I suspect that other users will benefit from reviewing the several threads available on this topic.  HP, you must fix this so that the printer works out of the box!

• I get an error, "cannot view XML input using XSL sheet" when I try to install a mass storage driver.

  Original title: cannot view XML input using XSL sheet

  I can't install a mass storage driver. Message "Cannot view XML input using XSL sheet".
  Unspecified error.

  Hello

  I would have you post your query in the MSDN Forums, because it is addressed to an audience of it professionals.

  Your question would be more out there.

  Check out the link-

  http://social.msdn.Microsoft.com/forums/en-us/categories/

  Back to us for any issues related to Windows in the future. We will be happy to help you.

  Thank you.

• Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

  Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

  I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

  Thanks, I'd appreciate any help.

  It is always useful to have the complete error message without paraphrase.

  It also helps to identify the version of Windows you have, including service pack.

  And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

  Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

  It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

  You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

  I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

  Don't skip step 4.  After step 4 and step 5, follow these steps:

  Important: If you have a Lexmark printer, skip the following

  Open a command prompt window (start > run > cmd > OK)
  type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  dependent on the spooler of sc config = RPCSS
  net start spooler
  output

  Note that there is no space before the = and there is a space after it.

  The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

• I get an error message when I want to print from my laptop on my Lexmart printer wireless. It is said "problems connecting to the printer.

  original title: devmgmt msc

  I get an error message when I want to print from my laptop on my Lexmart printer wireless. It says "connection to the printer problems" sometimes he just complained and then prints, sometimes it won't print at all. I hate the thing!

  Hello

  I suggest you to see link below and check if it helps.

  http://www.Lexmark.fr/publications/pdfs/810/winug/Eng/UGnetwk.html

  I suggest also you see the steps from the article below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

• I can't insert adobe XML in adobe pdf, get an error.

  I can't insert XML into pdf, get an error going to documents and endearing. A file is able to be edited and a watch pages are grayed out.

  I can't reach, these two should be merged. The file that allows me to see the elements in the pages section, I tried to extract to the desktop in pdf and combining the other pdf, still getting the same error xml. A single file is a PDF from the desktop, the other is a Web page, seen as a PDF on the page, they hit save in pdf on the desktop.

  Adobe 10.1.10

  Windows 10 pro

  In fact I thought to it.

  I've been clicking on convert to PDF on the Web page and not printed, and then selecting the pdf.

  It fixed immediately.

• DesignJet 5500: print head print test very good page, but I still get the error message to replace the printhead

  On my DesignJet 5500, I rswitched the ink tubes, printheads and printhead cleaners dyeing anti-UV, 81 to 83.

  I got an error message saying that the black print head needed to be replaced so I bought another head black printing and after that, I was able to print a test page that shows all the colors (image quality page?).

  Magenta not give not any code of error before, but now I get an error message saying that the printhead magenta must be replaced, even if magenta print well on the printed test page.

  Hello

  The printer give you a warning when the health of the print head is low, but it will continue to print.

  If the problem has been solved after all print head replacement can be that a print head cause others to fail

  Or, just a few bad print heads

• I use Firefox version 3.0.19 and I have Windows 7. When I use Firefox as a browser, I can't print my emails. I get an error message: «not available pcfax» If I use IE I don't have no problems printing emails.

  I use Firefox version 3.0.19 and I have Windows 7, which came with a new computer. When I use Firefox as a browser, I can't print my emails. I get an error message: «not available pcfax» If I use IE I don't have no problems printing emails.

  This has happened

  Each time Firefox opened

  == 1 day with the new computer about two weeks ago.

  Looks like you got the wrong printer selected.

  When you get the print window, choose another printer in your printer dropdown. You seem to have a fax printer selected instead of a physical printer.

• We get an error "NETWORK CONNECTION ERROR, make sure a firewall is not blocking access to the printer.

  * Original title: printer error...

  I was printing with a printer wireless for months and now all of a sudden I'm getting an error, NETWORK CONNECTION ERROR and then readings make sure that a firewall is not blocking access to the printer.   I checked and it is not blocked...  I did a session of disorder and it reads no problems found.   Can someone please...

  Hello

  1. what version of Windows is installed on the computer?

  2. What is the brand and model of the printer?

  3. you have any non-Microsoft firewall installed on the computer?

  4. what security software is installed on the computer?

  5 have have there been recent changes made on the computer before the show?

  Please follow the steps below and check if that helps.

  Method 1: Run troubleshooting network printer and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Method 2: Select the file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  Method 3: I suggest to change firewall security settings, or disable the security software on the system and try to access the printer.

  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.

  For more information, see the articles and check out them.

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/Understanding-Windows-Firewall-settings

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/allow-a-program-to-communicate-through-Windows-Firewall

  Let us know if it helps!

• trying to print from quicken and I get an error message that says that I have to be in the mode of administration and run restore pdfdriver.ba

  I try to print from quicken and I get an error message that says that I have to be in the mode of administration and run restore pdfdriver.bat.  I don't know what is a mode of administration, nor I know what is a pdfdriver.bat. Can anyone help?

  Hello

  1. what operating system do you use?

  2. what web browser do you use?

  3. have you made changes on your computer?

  4. What is the brand and model of the printer?

  5. are you able to print from other applications?

  When a printer is installed, members of the Administrators group on the computer are given permission to manage the printer by default. If you have an administrator account, you can probably change the printer properties. Otherwise, you must obtain permission to manage the printer before you can change the properties of the printer.

  Method 1:

  If you are using, I suggest you send the link to learn how to open a session as an administrator.

  How can I connect as an administrator?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-log-on-as-an-administrator

  Method 2:

  I also suggest you to see link and check.

  Error when printing to a PDF file: PDF driver is not found

  http://Quicken.Intuit.com/support/help/error-when-printing-to-a-PDF-file--the-PDF-driver-cannot-be-found/GEN82191.html

  Cannot print from Quicken

  http://Quicken.Intuit.com/support/help/not-able-to-print-from-Quicken/GEN82237.html