Priority of the BIOS boot options is not available

Similar Questions

• HP ENVY 17-n013na: the Legacy BIOS boot option does not work

  Support dear HP team,

  I recently bought for laptop HP ENVY 17-n013na .  It came with Windows 8.1. I have to install Windows 7. Unfortunately, the legacy in BIOS boot option does not work for me. Here is detailed information:

  BIOS version: F.04 Rev 5.0

  I tried updating to the latest version of the BIOS on the Support site.

  To activate the option to boot legacy, I followed the following steps:

  • Entered, BIOS configuration utility
  • Go to the System Configuration
  • > Boot options
  • Changed the setting to the Legacy Support on " Enabled"
  • F10 - save changes & exit

  Now, after the restart, if I go once more, configuration of the BIOS Legacy Support is set to disabled. Whenever I have change to active BIOS, Save & Exit, it is up to the people with reduced mobility. Because of that I can't run the installer of Windows 7 DVD.

  Please provide any help & suggestions.

  Thank you.

  Kind regards

  Eugene

  I managed to pass in Legacy mode as follows: http://www.eightforums.com/tutorials/13326-downgrade-windows-8-windows-7-a.html

  Reset the BIOS helped: https://www.youtube.com/watch?v=6KUyZIJ0xOc

  Can close the topic now.

  Thank you.

• Pavilion p6803w: USB boot option is not available in the configuration of the BIOS - can it be added?

  ???

  VetNet2016

  Sorry - NO - if the BIOS or UEFI menus do not provide the ability to select a USB key to start, there is no way to add this option.  It must be hard-coded in the firmware first.

• Compaq Presario CQ57: Need to get into the BIOS boot options received the disabled system error 59025057

  Need to enter boot BIOS options have system error disabled 59025057 also want to disable the password of the bios for the future

  @thatmomgamer

  Please enter:

  46983099

  Kind regards.

• Paint the Panel 'time' option is not available on CC

  Not sure if this has been changed with AE CC but I find is no longer the setting of the "length" in the control panel of the painting.

  I saw others with similar issues but you have not found an answer that works for me and it doesn't seem to be that whatever it is documented on this.

  See screenshot below. First image is what I'm looking for, secondly, is what I have on my screen.

  Imgur: the most impressive pictures on the Internet

  Attempt to use the brush outline image by image. Thanks for the help.

  no need to use imgur. Just copy paste your screenshots here. It will be much easier for us to see and many users do not click on links in any case. you need to open the Panel of you all the way down

  

  also, working in mode stacked panels. It is perhaps less intuitive at first because the panels can get close without relationship with overlapping panels

  

  You can work from the classic way by unchecking this

  

• "protect tones" option is not available for images high resolution (1200 dpi)?

  Hi community - I'm publishing some drawings I scanned at 1200 dpi and need to burn/dodge areas of images. However, the protect tones option is not available (can't click on the checkbox) and only works if I decrease the resolution. Help?

  What picture Mode do you use and what are the dimensions in pixels of your drawing?

  I noticed no check in/8 gray levels, it is ok with RGB/8

  1200 dpi/PPP is a printing technique and tell me if the amount of pixels are above what the dodge / / burning tools can take.

• Reference Dell will not load xp. Info Tech 0x000000c2 (0 x 00000043, 0xDFB25000, 0 x 00000000, 0 x 00000000) tells me to disable the BIOS memory options

  Info Tech 0x000000c2 (0 x 00000043, 0xDFB25000, 0 x 00000000, 0 x 00000000) system search floppy witch, I did not. Cannot start in safe mode that is blue screen tells me to disable the BIOS memory options, but finding where to.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the full and exact error message on blue screen?

  In response to the questions above could help us help you better.

  If the system restarts after blue screen then use disable automatic restart on system failure option to stop automatic reboot.

  Here's how:

  1. turn on your computer and keep pressing the F8 key before Windows starts.
  2. now in the Advanced Boot Options, select disable automatic system failure reboot

• NB200-10Z - No. SD card with the new BIOS boot option

  First with the version of the BIOS 1.60 could start with SD cards
  Instead since I updated the BIOS to version 1.70 is therefore more option.

  Why?

  Hello

  Are you sure that SD boot option isn't available more?
  You load the default settings after the update?
  I can t imagine that Toshiba has removed this feature

  As I wrote, try the default settings and other SD card. You can post it here again what is happening.

• When you try to use the repair your computer from the advanced boot option option, it only shows a different user account and my username and password does not work

  Original title: when you try to use the repair your computer from the advanced boot option option

  When you try to use the repair your computer from the menu option options advanced startup, when it comes to the screen to select the user account it shows only a "another" user account and my username and password does not work, and the 'OTHER' this account is not on my list of user accounts... what should I do?

  Hi kennympeek,

  1. why you try to do the Startup Repair?

  You can try to perform the commissioning of repair using the audit and the disk Installation of Windows Vista.

  For estelle information links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope this information is useful.

• Satellite A100-033 - black screen with no data after the advanced boot option

  I tried each F8 option in the advanced boot options to get my work laptop. There is just a black slowed after repairing Windows files and Loaded. Also F2 & F12 even when I try to use the recovery disk it remans black?
  Safe mode: nothing is displayed on the screen at all

  I noticed my mouse cursor can be seen moving around the screen, but the rest of the area is black.

  OS Windows Basic 32 bit IE9 Satellite A100-033

  Hey,.

  So if you start from the Toshiba Recovery disk you also get a black screen?

  What happens if you start from a normal Microsoft Windows disk? Just to make sure that it of hardware related problem or not

• Compaq 6730 b: ODD Bios boot option

  Lack of the WEIRD boot option in the BIOS:

  Review of the video BIOS INTEL 1625

  HP Compaq 6730 b; Serial number of the Notebook [personal information deleted]

  Nice machine and a gift from a friend is suicidal because the comrades-HP estimated forgot his STRANGE.

  The above BIOS has no option start WEIRD! Please advise how to solve this problem... ashamed. 

  E-mail: [personal information]

  Yes, that is: change to IDE in the Bios and it can start from the "upgrade Bay.

  But Kinel can be wrongly assume that the origin of the "upgrade Bay" is known to mm. Helvet Paccard. Let's be nice to them and instead assume that "upgrade of the Bay" is obtained by a random generator to confuse the terms.

• My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc. What should I do with it?

  My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?

  Brand: HP
  Type: laptop
  Model No.: Pavilion zt3000
  512 MB DDR1 RAM
  Thank you very much!

  Hi Dominic,

  Are you able to get into BIOS to make changes?

  If so, you can try to reset the default settings of the BIOS and check.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.

• When I restart and press F8 on my dell Inspiron will in the Advanced Boot Options. I support then to fix my computer, but instead of reloading Windows Vista my computer turn on normally.

  problem reinstalling windows Vista operating system.

  I'm trying to reinstall the windows Vista operating system.  When I restart and press F8 on my dell Inspiron will in the Advanced Boot Options.  I support then to fix my computer, but instead of reloading Windows Vista my computer turn on normally.  How can I solve this problem.  Thanks in advance for your support.  Valerie SG

  Why you want to reinstall your PC? It could be that you don't need to reinstall Windows, and solutions you could solve, which is recommended.

  However, if you want to reinstall your Windows, it's NOT F8, F8 key belongs to Windows and he'll fix the problems. To reinstall Windows, you must use differently for Dell steps:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_347576&isLegacy=true

  And for more details, you could visit the Dell Web site and search for your model and find the method to do this, or contact technical support:

  http://support.Dell.com/

• I have windows Vista Sp2. Cannot get into the BIOS. Computer does not start on the desktop. What can I do?

  Have Windows Vista SP2.  Switch on computer will go not on the desktop.  Tried to get into the BIOS, but get a blank screen.

  Someone at - it ideas. Thank you.

  Have Windows Vista SP2.  Switch on computer will go not on the desktop.  Tried to get into the BIOS, but get a blank screen.

  Someone at - it ideas. Thank you.

  Don't ned to start the Office before accessing the BIOS...

  The following tutorial is about changing the bios boot sequence.
  #1 step is how to get to the BIOS window. THIS show be what you need. You can skip the rest if they do not apply to you.
  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Satellite L450D PSLY5E freeze during the BIOS update - now does not turn on

  Hi guys,.

  I have a Satellite L450D. I recently tried (unfortunately) update the BIOS after a clean installation, because the FN key no longer working to bring up the toolbar.

  Winphlash program froze near the end and the system remained frozen for a good half-hour. The only way out was to remove the battery (as I know in any case).

  Now, the system will light with battery in or out and plugged in. I guess I've damaged the hard drive or the card mother or something.

  Is it possible to fix? Or is it?

  Thank you very much for your help.

  BTW - I know now not to update the BIOS unless it is ABSOLUTELY necessary and well advised.

  Joey

  > I guess I've damaged the hard drive or the card mother or something.

  The disk HARD isn t damage but the Rom module where the BIOS is stored was not flashed properly.
  I guess that this happened because the flash procedure was interrupted.

  I'm not sure if this can be fixed perhaps the service guy could flash the ROM module with special disc of crisis of the BIOS.

  I keep fingers crossed