Pro8000 prints the alignment page after each print job

Similar Questions

• HP officejet 6000 prints the alignment page after each print job

  HP officejet 6000 cb051

  Vista 32

  a technician had me remove and then reinstall the driver, I thought it helped, but it didn't so I reinstalled the driver from the web page and that did not help either

  My printer prints an alignment page after each print job.

  I used my call free support to resolve this issue, and I thought it was fixed, but it isn't.  I checked the manual and there is no information there.  I have no idea what to do next.  Someone at - it any help?

  Susana

  susana1027

  The alignment page will print until it completes successfully.  Try print a page of diagnosis as on the Six Solution on this page. Do all color printers correctly?  The alignment will fail if the parties in black and color do not print correctly.

• K5400 prints the alignment page after each document

  I have a HP Officejet Pro K5400, which insists on an alignment page printing after each document.

  It's on Windows XP Pro SP3, if that makes a difference!

  I've tried everything I can think of to clarify this, but he persists.

  I know it's the printer, I moved and installed on another PC, and the error moves with the printer!

  Can someone tell me how to stop this, as HP don't seem to know!

  Message edited by JimW on 22/12/2008 08:26

  Excellent!

  Installation of new heads, (both for security), sorted!

• DeskJet 930c: avoid the aliignment page after each page

  Hello, since I changed the black ink cartridge the printer prints an alignment with full black rectangles header page after each page I need to print. Is there a way to stop this behavior unconditionally

  Hi @guy_c,

  Welcome to the Forums of HP Support! I read your post and see that the alignment is printing after each page, after changing the cartridge. I will do my best to help you with this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  This problem occurs for one or two reasons, a problem of power, recharged cartridges or dirty contacts.

  I would like to do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  Reinstall the cartridges.

  I have provided a document for the cleaning of the cartridge and printer contacts, to see if that can help in this situation. Supplies HP inkjet - printing cartridge errors.

  You use genuine HP cartridges?

  If the problem persists, please Contact the HP Support for help. Check the model number and the form to receive a file number for faster assistance.

  Please let me know the results. Thank you.

  

• My officejet pro 8000 just started to print an alignment page after each print job.

  Ive had my printer for about a year now with no problems.  Then I got the message that I had to clean the print heads I did it in the machine and manually. I found one of the printhead was damaged then succeeded him. Now, AFTER each job, it prints a page with lines down on the side of the page and gibberish.  This, of course, consumes a lot of ink, so how can I solve this?

  Ive tried re-initialization of the printer by pulling the power cord and USB cord, but it does not work.  There is no screen but I followed the tutorial online to set up the printer, but it does not help also.   Ive checked for new drivers, and there was none.  Any suggestions?

  This seems to have solved the problem.  Thank you for your attention to detail and timely responses.

• J4580: J4580 will not detect the alignment page.

  My J4580 that works very well for years, now will not detect the alignment page after you print and put on the scanner bed.  I try three times and it then goes to the default alignment parameters.  It still prints but text tends to little fuzzy.  What can I do to fix this?

  Hi @BruceK43,

  Thanks for joining the Forums of HP Support for a solution to your problem of alignment.

  I understand that you used a HP Officejet J4580 all-in-One printer with a Windows 10 computer but when you try to only scan the alignment page, the printer is not detected by the alignment page returns to the default alignment parameters. I would like to help with that.

  Here is the document of support designed to be used with this problem - a "alignment failed" Error Message appears on the printer control panel.

  Please let me know if that solves the problem, or if you need assistance.

• How can I stop the printer to print an information page after each print job

  Original title: print

  How can I stop the printer to print an information page after each print job

  Word 2007

  1. Click the Microsoft Office button, and then click Word Options.
  2. In the Print Options area, clear the print document properties check box, and then click OK.

  Word 2000, 2002 and 2003

  1. On the Tools menu, click Options, and then click the print tab.
  2. In the Include document box, clear the check box Of the Document properties , and then click OK.
  Source

• HP Officejet Pro 8000 Wireless - print out this partial test page after each print job

  I get this page a partial alignment (?) after each print job.  I reinstalled the software, aligned and cleaned print heads, contacts cleaned print head, but still get this page.  Pretty frustrating.

  This image, I see that the printer does not align correctly.  If the unit is out of alignment, then the sensors in the printer detects it.  That's why the printer is constantly trying to perform the alignment.

  There is a document with the steps to solve this problem.  The document helps walk one by checking the cartridges and the parameters to determine if the problem is software or hardware.  Click here to access the troubleshooting document.

  I hope this helps.

• my hp photosmart d110 is stuck trying to print the alignment page

  I use mostly my HP Photosmart D110 as a copier.  Yesterday, after changing the ink cartridges, it went to the screen that says it prints the alignment page.  It does not print.  I have it put off, sometimes by the button, sometimes by pulling on the power cord, but it turns on and says he has to print an alignment page.  He's stuck in this loop now, and I can't use it al all.  Help!

  Hi guidoguido,.
  
  Follow the steps below.
  
  1. remove the cartridges from the printer
  2. If the printer is on, disconnect the power from the back of the unit.
  3. wait for 1 to 2 minutes and make sure that the power is plugged directly into the wall before connecting the printer in.
  4. If the printer does not by itself, press the power button, and then wait for the printer to you ask to install the cartridges.
  5. try to re-run the alignment on the printer
  
  Let me know what you find?

• Printer keeps printing a test page after each print document

  I have a HP Deskjet 970Cse on Windows XP Professional with Service Pack 3.

  About 2 weeks ago, I was receiving ambiguous messages on the ink levels, for example, saying a cartridge was ink when it was not, and after checking and replacement he told me the other cartridge was bad or empty.

  I replaced the cartridges with new and error messages went. To test others, I replaced the previous game and they worked well without empty messages.

  Then one day my computer tells me it was installing the HP printer and now I got 2 copies.

  I uninstalled the drivers and printers and downloaded the last at HP (the same I was already running years) and now it prints a test page after each print job that is wasting ink. By the print job, I mean it prints a test page once all the documents in the print queue. On the rare occasions that it will print a test between each document but this page is not the standard.

  Any help would be appreciated.

  Andy, honestly with a printer is 10 years and more, the problem you are experiencing may deal with the age of the device more than anything else. You could try hard-reset of the printer (leaving it unplugged for 20 seconds), but if what you said about the button is true - it is possible that the Board of Directors is signaling the machine to print a test page after each draw by a malfunction at the hardware level.

  In this case, maybe it's time for a new printer. If you need help to choose one, there are many solids Deskjets currently on the market from HP that would be a wonderful substitute for this machine.

  Let me know and have a great day!
  

• Printer through Microsoft problems. -Printer prints a details page after each page I print

  I had problems with my printer, printing a message page after each page to print. Even if I prtint 5 pages in a row, there is a page after each copy that indicates: in the format below:

  File name,

  Directory,

  Model,

  Title,

  Object

  Author,

  Key words,

  Comments,

  Date of creation,

  Number of change,

  Last record

  Last saved by.

  Total editing time,

  Last impression,

  From the last complete printing, etc.

  I had the Brother printer people help me and they say that it is the problem of Microsoft Software.

  How can I get rid of this annoying and useless prolblem. It cost me tons of sheets of paper wasted with the information above on any paper that is printed?

  The support of brother confirm that the version of your installed printer software is supported in IE9 (yet)?

  Printing webpages in Internet Explorer 9: FAQ
  http://Windows.Microsoft.com/en-us/Windows7/printing-webpages-in-Internet-Explorer-9-frequently-asked-questions

  You cannot print or preview before printing a Web page in IE9 (15 Apr-11)
  http://support.Microsoft.com/kb/2409656

  You cannot print or print preview the Web pages in IE7 & higher (Win7 or Vista)
  http://support.Microsoft.com/kb/973479

• HP Officejet Pro K5400 print extra page after each print job

  I've updated HP software version 2.16.1 on my version of Mac OS X 10.7.5. After the update of the printer still prints an extra page after each print job. This delays the work according to the printer, because the printer flashes for about 5 minutes, then prints extra page and there always several 2-234 X. Don't know how to solve this problem, I already checked that the software is up to date. Is it possible to go back to a previous version of the HP update until a solution is found?

  Hi kajuntwin,

  The patch is now available, you can install it from the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-126392-1&cc=us&DLC=en&LC=en&OS=4159&product=1146331&sw_lang

  Kind regards

  Shlomi

• When I press OK on my 4280 printer to copy the alignment page, it shows "paper"? Nothing prints.

  All-in-one printer, HP Photosmart 4200

  Windows Vista 32-bit

  When I press OK on my 4280 printer to copy the alignment page, it shows "paper"? Nothing prints.

  Thank you very much for your answer. As suggested, I tried the hard reset nothing helps. Since then, my printer has me faithfully helped the last 4 years, I thought that it is preferable to ask for rest & buy another HP printer. I am proud to say, I am very pleased. Thanks Shane.

• everything is printing on the alignment page so my printer won't align not someone ' one help?

  printer is HP Photosmart B109 a - m

  Scanner not recogising not alignment page "alignment Page not detected."

  Have Windows 7

  Nothing different or new added

  The alignment page doesn't seem to have anything printed on it

  Please see the procedure described in the document located here.

  I hope this helps.

• C4585 trying continually to print the alignment page

  I just replaced the black ink cartridge, and the printer asked me to print and scan an alignment page. Printing works fine, but the analysis still fails to "alignment page not detected." The alignment page is printed black and white only, perhaps because the cartridge color is very low, maybe because I put the printer in B & W/gray levels only.

  I've got 5 pages of B & W alignment, that all sounds good and is due to complete or skip the alignment step.

  Unfortunately the printer continues to try printing alignment pages, market, and also at other random times.

  A quick google search found this link:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=buu00657&lang=en&cc=us&TaskID...

  It seems that some HP models have a method to work around the alignment process. However, my model does not seem to be listed.

  Thanks for your help!

  Ok thank you. I found the secret menu of bypass using google and worked out how to ignore it.