Probability of success of 3 to capture instant removal if system itself takes about 3 TB and he left only about 70 GB of space on the VMFS5 partion (vSphere 5.1)

Similar Questions

• How many captures instant ESXi provides for each VM?

  Sorry, but I can't really find this little piece of information.

  How many captures instant ESXi provides for each VM?  VMWare Server, we would have only a snapshot.  So I guess it's also a snapshot in ESXi, right?

  ESXi supports more then a snapshot, although I couldn't find the exact number, it is quite high for most peoples use of snapshots.

• New capture instant error - not sure what to look for

  Hello

  Sometimes, I get this error when I try to create a snapshot:

  New capture instant operation is not valid due to the current state of the object.

  
  

  What the State would prevent this? The virtual machine runs on and running.

  
  

  T
  

  This seems to be a known issue, see 11 Re: ERROR: new Snapshot (the operation is not valid due to the current state of the object)  

  Should be fixed in a future generation.

• Capture instant too old question

  Hello
  The db oracle for our application has been recently improved 10.2.0.4.0 - 64bi to 10.2.0.5.0 - 64bi.
  We have a process of MV long duration (approximately 30-35 hours) in our application. These MVS are shell scripts referesed.
  After improvement, we started getting capture instant too old error after execution of the MV update. The job gets failed after throwing too old error of snapshot.
  The current setting of the undo retention settings is 432000 (which is 120 hours).
  
  If we try to perform the process on the weekends the same runs without error.
  
  Can someone help me identify the CAR of this problem? Or is this a bug in oracle.
  
  Concerning
  Tarun

  Tarun,
  This forum deals with migration issues of foreign to Oracle databases using SQL Developer Migration Workbench. You have a problem with your database Oracle and MVIEWS. Please close this thread and post your question in the forum of the database again:
  Database General Discussions

  Thank you
  Klaus

• Tried to remove the capture instant, insufficient space, space, how I now remove it?

  Hello

  I had a good search of the forum and knowledge base but cannot find someone with the same problem. If anyone has any suggestions, I'll be very grateful...

  Performance of Fusion 2.0.5 on Macbook with Windows XP in a virtual machine.

  I was running short of disk space on my hard drive then thought delete my and only instant (plug for a long time with Fusion 1) would be without space.  However, I didn't know that you had need of enough space to work on stereotypes.

  Remove failed with the following message "there is not enough space on the file system for the selected operation.  The snapshot has not been deleted, but the icon for that so it is more in the Snapshot Manager.  So despite freeing the space required, I can't repeat.  Is it possible to do it manually through the console.

  The relevant section of ~/Library/Logs/VM Fusion/vmware - fusion.log:

  17:00:23.502 Aug 05: unknown | SNAPSHOT: Consolidation of the ' / users/mark/Documents/Virtual Machines.localized / Windows XP Pro Work.vmwarevm / Windows XP Pro work - 000001.vmdk' to ' / users/mark/Documents/Virtual Machines.localized / Windows XP Pro Work.vmwarevm / Windows XP Pro Work.vmdk'.

  05 August to 17:00:23.669: vmfusion | -[PLGuestAppMgrDelegate updateHandlers]: comments does not "Manager set" capacity, does not update managers of guest.

  05 August to 17:00:23.669: vmfusion | -[DUIGuestAppMgr refreshGuestAppsToPublishWithDelegate:doneSelector:contextInfo:]: comments not has not the ability of the unit, not re - publish proxy applications.

  17:00:23.809 Aug 05: unknown | DISKLIB-DSCPTR: open : "Windows XP Pro Work.vmdk" (0x18)

  17:00:23.809 Aug 05: unknown | DISKLIB-LINK: open ' / users/Mark/Documents/Virtual Machines.localized / Windows XP Pro Work.vmwarevm / Windows XP Pro Work.vmdk' (0x18): monolithicSparse, 62914560 sectors / 30 GB.

  17:00:23.809 Aug 05: unknown | DISKLIB-LIB: open ' / users/Mark/Documents/Virtual Machines.localized / Windows XP Pro Work.vmwarevm / Windows XP Pro Work.vmdk "(flags 0 x 18).

  17:00:24.022 Aug 05: unknown | DISKLIB-DSCPTR: open : 'Windows XP Pro work - 000001.vmdk' (0x18)

  17:00:24.022 Aug 05: unknown | DISKLIB-LINK: open ' / users/Mark/Documents/Virtual Machines.localized / Windows XP Pro Work.vmwarevm / Windows XP Pro work - 000001.vmdk' (0 x 18): monolithicSparse, 62914560 sectors / 30 GB.

  17:00:24.022 Aug 05: unknown | DISKLIB-LIB: open ' / users/Mark/Documents/Virtual Machines.localized / Windows XP Pro Work.vmwarevm / Windows XP Pro work - 000001.vmdk "(flags 0 x 18).

  17:00:24.052 Aug 05: unknown | DISKLIB-LIB: not enough space to combine. Have 4873404416 bytes, 20842414080 bytes, of need. 17:00:24.053 Aug 05: unknown | DISKLIB-LIB: Impossible to combine: there is not enough space on the file system for the selected operation (81415693). 17:00:24.053 Aug 05: unknown | In SUMMARY: SnapshotCombineDisks: impossible to combine: there is not enough space on the file system for the selected operation (81415693). 17:00:24.362 Aug 05: unknown | In SUMMARY: SnapshotConsolidate failed: there is not enough space on the file system for the 17:00:24.362 Aug 05 selected operation (5): unknown | SNAPSHOT: Consolidate failed: there is not enough space on the file system for the 17:00:24.690 Aug 05 selected operation (5): vmfusion | Status of power (reported) poweredOff Aug 05 17:00:24.695: vmfusion | Reloading of config State: users/Mark/Documents/Virtual Machines.localized / Windows XP Pro Work.vmwarevm / Windows XP Pro Work.vmx 17:00:24.761 Aug 05: vmfusion | VMHS: Transition vmx/execState/val of poweredOff 17:00:24.768 Aug 05: vmfusion | Cmd /vm/ #3a34b888e28f7421/cmd / # 74e8/op/poweredOffConsolidate/failed: unable to clean up deleted files: 17:00:24.768 Aug 05: vmfusion | There is not enough space on the file system for the selected operation, GB 19.4 free on the file system and try again. 05 August to 17:00:24.768: vmfusion | Cmd /vm/ #3a34b888e28f7421/cmd / # 74e5/op/snapshotConsolidate/failed: unable to clean up deleted files: 17:00:24.768 Aug 05: vmfusion | There is not enough space on the file system for the selected operation, GB 19.4 free on the file system and try again. 05 August to 17:00:24.824: vmfusion | SnapshotTree: Build failed: failed to clean up deleted files: 17:00:24.824 Aug 05: vmfusion | There is not enough space on the file system for the selected operation, without 19.4 en on the file system and try again.

  Any suggestions would be welcome!

  See you soon,.

  Mark

  With stop the Virtual Machine, not suspended, take a new snapshot, and then delete it immediately. This will force the orphaned snapshots should be deleted in the process, or you will always have a problem and if the later then the only option is to create a new Virtual Machine using Disk Imaging of one kind or another. Products such as Symantec Norton Ghost can be used or even dd from an Image of CD/DVD/ISO of OS Linux Live or you can use VMware vCenter Converter.

  BTW I suggest you make a backup copy of the virtual machine or the rental very a full user of the virtual machine data backup before trying anything.  Keep in mind that in all cases it must have enough free disk space to solve this problem, even if an external hard drive to be used temporarily to facilitate the process.

• Help to capture packets on a system MXP running F9.3.3

  Someone at - it a good set of instructions on how to make a capture of complete package on an MXP endpoint.

  I'd like to do something that I can open it directly in Wireshark.

  We seek to verify that the DSCP marking are sent and received on UDP traffic that is sent and received since a MXP.

  I have all the DSCP settings in the configured MXP, but I want to check that the markings survive at the end.

  Require Root access?

  I see that in a log rather than a full packet capture file?

  We use capturing packets in the regular TC7.1 of the bases and is working very well... wish they would add to the web interface MXP

  Thank you

  There is no way to handle this grimly on an MXP endpoint.

  So you have a switch that supports a monitor mode (okay we need to

  Trust the switch to show what you want to see) or some other capture

  a device that you can inject into the path.

  Good success.

  If this post was helpful please rate this post with the stars below!

• I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?

  I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?

  Please give as much information as possible on your support. The video and audio works in QuickTime player? What are the specifications of media?

• HP Officejet Pro 6830: Instant ink sign up, site Web, reset password connection and why start using immediately?

  I have a few questions and problems...

  I signed up for the moment of ink and placed on hold since I just bought my printer. I don't need instant cartridges since I just bought my printer and got new ones with the printer.  is there a scenario where it would be sensible to get instant ink hp going to as soon as you get a new printer?  wouldn't you want to use the cartridges you get and delay the instnat hp ink until you need new ink cartridges?

  Second, I got ink in the mail even if I put it on hold.

  Thirdly, I am trying to log on to the instant the ink site but my username and password do not work and the password reset function won't send me an email to reset my password.

  Fourthly, I received an offer of $25 with printer eligible purchase and hp ink signup discount, which i did, and I had to to receive email from hp to submit the $25 discount.  I don't have this e-mail.

  so far not a very good experience for this going.

  Hi dabrooks, even if you register in the instant the ink program the service does not start and you are not charged until you insert the first game to instant ink cartridges that you receive. The pages that you print using the cartridges supplied with the printer are not counted as part of your monthly pages quota and you are therefore quite correct to use these supplies until they are exhausted, how you install the game of instant cartridges you received when registering in the program. Once you insert these into your printer, the service is enabled and the number of pages you print is followed by the service.

  For other issues that you mention in your post, I would recommend contacting the instant ink dedicated support team here. Fill in the required fields and click on the button to display the options where you can select the phone or chat to get help.

  Hope this information helps and that you get your other issues fixed in a Masson in due time by the support team.

  Best

• Cannot convert Server 2008 R2 Machine get error: Instant The VSS cannot be stored, because there is not enough space on the source volumes or because the source computer does not all NTFS volumes. Error code: 2147754783 (0x8004231F).

  I have a couple of server 08 R2 machines where the P to V conversion fails.  I did some research and the problem seems to be related to the system reserved Partition that has 0% available 100 MB free space.  Conversion fails with the error below.

  VSS snapshots cannot be stored because there is not enough space on the source volumes or because the source computer has not all NTFS volumes. Error code:
  2147754783 (0x8004231F).

  
  

  Someone had this problem and came to the top with a solution or to get around?
  

  
  

  Thanks in advance
  

  Guessed it.  My snapshots Appassure did not also exist with a similar error, so that's what I did to solve it.  My servers now converted without any problem.

  1. Open disk management.
  2. Look at the partition of the PRS and see if it is 100% full.
     • If Yes, proceed to step 3.
     • If this is not the case, check if there are readers who have no more of 300 MB free (minimum requirement to use VSS).
  3. Click a drive, select properties and then select the instant snapshots tab.
  4. Ensure that all shadow copies are disabled and no limit on all players.
  5. Go to the partition of the SRP and assign the B:drive letter.
  6. Open the B: drive via disk management, and then locate the folder System Volume Information. Note: if necessary, change the folder options so that you can view hidden files, folders and drives.
  7. Right-click the System Volume Information folder, and then select Properties.
  8. On the Security tab, click Edit, and then add the group with full control everyone in the folder.
  9. Open the System Volume Information folder (you should see log files are full), open a running as an administrator command prompt and then type the following commands to unload the filter driver.
     • B:
     • B:\>FLTMC UNLOAD AAFSFLT
  10. Navigate to the System Volume Information folder, and then type the following commands:
      • B:\>CD System Volume Information
      • B:\System Volume Information > AALOG_ DEL * (this will remove all of the log files, and then re-create a new)
      • B:\System Volume Information > CD\
      • B:\>FLTMC LOAD AAFSFLT
  11. Close the command prompt window.
  12. In Windows, right click on the reserve system folder and remove the Group everyone.
  13. In Disk Manager, remove the B: drive (and click Yes when prompted with a warning window).

• How can I register a message of success to a drag and drop interaction - I don't see this option in the Actions on the possibilities of success and it cannot know?

  How can I register a message of success to a drag and drop interaction - I don't see this option in the Actions on the possibilities of success and it cannot know?

  Hide you this way:

  

• Capture instant SQL Server

  SQL Server 2008 snapshot fails with "cannot create an instant downturn... exceeded the time limit for holding off I/O" is due the number of e / s? Snapshoting WHAT SQL taken in charge and is a good solution for backup/restore options fast in case of failure of the server (hardware or software)?

  Hello.

  Any chance that this forum works on a Server Windows 2008 OS? We had problems with snapshots not there and that requires an adjustment in the VMware tools inside the virtual machine. The PDF file attached includes details on it.

  I hope this helps.

  Good luck.

  Claude

• Report to capture instant daily script to send an email offline?

  Hi people,

  I know that in VCenter, we can set the alarm to send us an email to OPEN the snapshot that is actively growing at the host ESX (i), but in this case, I have different cases to manage, it is CLOSED (PoweredOff) snapshot that is not detectable by the VCenter alarm unless I go with my script as follows:

  Connect-VIServer VCenter01-VM
  Get-VM | Get-Snapshot | Select VM, Name, Description, Created, SizeMB | Sort SizeMB | ft -AutoSize
  Disconnect-VIServer -Confirm False
  
  

  then he would list several snapshot of small size, a few hundred kilobytes up to GB.

  Reminder: if it is snapshot to the virtual machine, and then the backup every night will fail.

  My goal is to have a script that allows to:

  1 generate the list with instant VM and then send it to me every day.
  2. If there is no VM to open the snapshot, so you don't need to send e-mail.

  Any help please?

  This expression has been a failure.

  To check it fi are instant, you can replace this line by

  if ( (Get-Snapshot)) {
  

  If there are no snapshots Get-Snapshot will return $null and the condition will evaluate to $false


  But this way you run the cmdlet Get-Snapshot twice.

  It is better to do it this way

  Connect-VIServer VCenter01-VM -User "DOMAIN\PowerCLIRO" -Password "xyz" 
  
  $snaps =  Get-Snapshot
  if ( $snaps) {
  
  $smtpSrv = "smtp.domain.com"
  $from = "[email protected]"
  $to = "[email protected]"
  $subject = "Snapshot Report"
  $body = $snaps | Select VM, Name, Description, Created, SizeMB | Sort SizeMB 
  
  $msg = new-object Net.Mail.MailMessage($from,$to,$subject,$body)
  
  $smtp = new-object Net.Mail.SMTPclient($smtpSrv)
  
  $smtp.send($msg)
  
  } else {
  
  Exit-PSSession
  }
  
  Disconnect-VIServer * -Confirm:$false
  

• Capture instant causing VM Power Off

  We are short of Equallogic's Auto-Snapshot Manager/VMware Edition of our data protection strategy, and we encountered a problem where every once in a blue moon we will get an error stating:

  The esx host error message: an error occurred by restarting the virtual machine after taking a snapshot. The virtual machine will be turned off.

  Error message from the esx host: perform disk cleanup. Cannot turn off.

  Machine virtual esx host is turned off

  This occurs after the ASM/VE creates the snapshot, and then trying to delete it... as a result of the virtual machine is turned off.

  I found a post on the forum (http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626128381667656728353475 & threadId = 1099600) with similar problems with what seems to be HP is equivalent, but it doesn't seem to be any solution there either.

  All the world ran into this issue before?

  These types of message might be the problem.

  Request for information: could not open the disc

  "/ vmfs/volumes/4c58b856-3e066306-796c-a4badb11d718/cad-clover/cad-clover_1-000002.vmdk".

  or instant one of the disks it depends on.

  This shows how Vmware can not find a disk in the chain of snapshot.  Maybe the chainhas got corrupted. The vmsd file would show the instantaneous chain with the vmx which shows the current disc being pointed.

  www.phdvirtual.com, PhD Virtual Backup for Vmware and Xen Server manufacturers, officially esXpress

• Impossible to create capture instant for VM1, error-3941 (create the snapshot has failed)

  I vSphere 4.0.0 208111 using VDR 1.1.0.707 appliance for backup of a Windows Server 2003 SP2 with VMware tools installed (including the VSS component).

  I am unable to back up a VM, but can save all other virtual machines.

  Have tried to re - install VMware tools, ensuring Windows VSS patches are up to date.

  I can do a ntbackup to system within the virtual machine with success status.

  Impossible to find someone else suffer the same error with-3491, create the snapshot has failed.

  Any ideas?

  Paul

  To simulate a VDR initiated snapshot, try a manual snapshot of the virtual machine and see if it passes or fails.  If it fails, then that explains the error 3941.  Be sure to uncheck the memory status and check the comments of quiesce file system option during an attempt of the manual snapshot because it will mimic the snapshot operation that initiates the VDR.

• Capture instant option missing from orders...

  I don't know what happened, but for some reason, I don't see any way how can I take a snapshot of my VM 2. I know I used to have this option.

  Anyone know how I can get this option back?

  For now, I just tar and all the zip files. I just restored both my VM of tar and get back to an older version of my VM status.

  Is this an acceptable way to take a 'snapshot '?

  My host is ubuntu and invited are OEL.

  You will appreciate your help on this issue.

  Don't know why you can't take snapshots, but take a copy of all the files, when the virtual machine is not running, is certainly a valid way to take a snapshot of backup/manual. Be careful if you decide to add this backup because addresses a separate VM where the original is still known to the same server instance 2.0 since you'll probably get double UUID and MAC.

  What happens if you try and take a snapshot using vmrun since a shell/SSH window? Run the command without arguments to get usage.

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.