Problem 4g liquid Zest camera blurry

Similar Questions

• Why is my Nex Vg30 camera blurry when his photo and video mode on (goal no. join)

  Why is my Nex Vg30 camera blurry when its video mode on mode and photo. There is no lens mounted and I put the settings to "shoot without aim" and his still fuzzy. Just got my camera in the mail today.

  I have a lens on it until this last week. I have the lens Sel1855. I can zoom in with the lens ring and will get the clear picture but when I perform a zoom out or zoom in all the way the image is blurry and doesn't let me get out the clear picture zoom one where I'll ways half in the zoom on the lens.

  The only way I can shoot and get a clear picture would be if I have the lens half of means until the Terminal 35 on the lens. I want to be able to get the full picture like when I do a big on mine, rather than by zooming in on the zoom button.

  The problem I have is that when I shoot with the lens being always half ways out of the 35 marker, I always need to be a bit far from the talent or what I was filming and it causes fair gene to myself. Also audio are heard a little more than what it should because of the way I place myself because that the lens won't let me not get enough close due to the lens fades when I do neither turn the zoom ring.

  Is that what the camera has something hidden, maybe I have to set up?

• Acer Liquid Zest 4 G more low volume too loud

  Hello

  I just got the Acer Liquid Zest 4 G. I think it's a pretty awesome phone, except one thing. The smaller volume of media is still much too strong for me. For example, making it impossible for me to watch a video in the night without waking up everyone in the House.

  I tried to lower the volume with the 'Thin Volume Controll V2' app. That works a little, I'm able to lower the media far (the default lowest setting media volume I can adjust with my volume buttons is 49% according to this app.). But I can't change the volume a bit when I'm in the middle of the video without opening this app together again.

  Is there a way I can adjust the volume of minium I can change too with the volume buttons? Or any chance Acer goes to get out an update will fix this?

  I changed the values, so I'm not naked by default. But playing a mp3 and set values is for you the best.

• I am expierencing problems with my isight Camera on my MacBook Pro. Suddenly the video camera does not start (no green light on) FT or Photo Booth. The screen is black, if I restart computer it works but after closing the lid, it stops. V10.11.3

  I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer.  I use V10.11.3. An idea about what is happening

  Hello mpm068,

  Thank you for using communities of Apple Support.

  Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Take care.

• Download problems image cable Canon camera

  I have a brand new computer laptop Mac Book Pro with OS El Capitan, and I am trying to download my pictures from my compact camera Gx1 to the laptop via the camera download cable. Of course I've already installed the Canon Canon Utilities Window /Camera of its CD image software (has been attached to the camera when it was purchased). (The Canon EOS Utility software, which I also installed it, is exclusively for my Canon EOS camera models). However, the download of the image does not work either.

  Images are downloaded into the folder Mac (program?) "Bilder" (*) (Images (?) in the version of Mac OS English?) where I certainly don't want to, I want to download my images in my own folder structure that distinguishes for example camera model/date photo taken/RAW files or jpeg etc. The folder Mac (program?) "Bilder" (Images (?) in the version of Mac OS English?) may be authorized to store the images simple iPhone 6s I take, but certainly not Raw files of my actual cameras!

  (*) "Bilder" (Images (?) a multicolored a little icon circle in the operating system Mac - Mac (program?) file

  The thing very strange, as the first two weeks of use my brand new computer computer laptop Mac Book Pro, the image download to the Mac via the cable from my camera Canon G1x worked as planned, but AFTER I once (the first time ever to purchase date computer I tried to upload pictures to my iPhone 6 s new Mac) I downloaded images to the Mac from my iPhone 6 s via the cable of the iPhone, the camera G1x download system image failed. I seems as if my download of images from the iPhone 6 s "Insider" start-up of the Mac OS (program) folder

  the 'Pictures' folder (Images (?) in English Mac OS version?) and the laptop Mac assumes that I want to download all the images, as for example my G1x camera RAW files in the 'Pictures' folder (Images (?) in the version of Mac OS English?).. . DEFINITELY NOT!

  I am terribly frustrated now and do not feel the I get any understanding or assistance from Apple support.

  This description of the problem will also be sent to the camera of Canon Inc., informing them of my issues with Mac OS El Capitan.

  Someone experienced with Mac, a friend of mine, said that "as usual, Apple"cache"the images and makes them normally inaccessible in the Finder. If you want to work wth them in another program (also), you must export the images of "Bilder" * (Images ()) - not at all practical, which means that two copies of images.

  Joined 9 screenshots - .png and .jpg files (. png files show how Mac views are displayed, show the .jpg files "how it should be regarded with correct download cables", the screenshots of the interface come however from a laptop with XP Home, not Mac OS operating system.

  The first two weeks of work with my Mac, the 'Download desired cable interfaces"WERE EVEN in what concerns the PC referred to above.

  

  Hi CanalogSE,

  Welcome to the communities of Apple Support! I'm sorry to hear you're having problems with your new Mac. You're talking about the 'Bilder' application seems to be the new application Photos, replacement of preparations on the previous iPhotos. If you wish, you can read more about it here:

  Apple OS X - pictures.

  Start with Photos for OS X - Apple support

  From your description, it seems that if you have connected your iPhone to import your photos, she may have inadvertently changed the overall picture import settings by launching Photos for the first time (since importing default photos for devices iOS in El Capitan's Photos). If you want to change the application for importing photos by default for when you connect your Canon Gx1 (for example, for the Canon software), you should be able to get rid of it in another application called Image Capture; I'm not clear what would be the name translated, but it should have this icon:

  Image Capture help

  In the Image Capture with your camera connected, you should see an option in the lower left corner to opens the connection this [device]: which will allow you to select your preferred; application If you don't see this, you may need to click on the the icon to display these options.

  Concerning

• ac170tu: problem with a vga camera

  Hello

  Can someone please help with this problem.

  IAM cannot use my camera and light buttons.

  camera: error message, you do not have the compatible vga hardware or driver to run you cam

  touch of brightness: brightness buttons does not

  I tried to uninstall and install the graphics drivers unresolved problem.

  Please help me solve this problem.

  Hello:

  Try this graphic driver... a 1 on the list.

  https://Downloadcenter.Intel.com/download/25274/Intel-graphics-driver-for-Windows-7-8-1-10-15-40-

• Please, I have a problem in my iPhone 6, the problem is that the cam is not working because I downloaded the latest software and I don't know the problem, so can you help me to send me to any official provider here because I don't know, thank you

  Please I need the answer as soon as possible because I don't know what is this problem with ease?

  Thank you very much for the help.

  Hello Moudy778,

  Thank you for using communities of Apple Support.

  I understand that you are experiencing a problem with the camera on your iPhone.  It is not too clear to me what problem you are having, please take a glance to the article below for questions from any camera you may be seen.

  Get help with the camera on your iPhone, iPad or iPod touch

  Take care.

• Problem with connect Ethernet camera or vision Builder

  Hello world!

  I have Airlive POE-100CAM. It is possible to connect the camera with NIVB?

  I want to receive the image with this cam and inspect in NEITHER.

  I connect the camera to the other computer from my site, but NEITHER Don t see cam.

  Where is the problem?

  Thanks for your advice and sorry for my bad English.

  Frit

  This device is not compatible with IMAQdx. Camera IP (network security cameras) support is currently limited to mark Axis and Basler cameras.

  Eric

• HP Envy 15t: problem of HP TrueVision camera after upgrade to a different version of the factory Windows 8.0

  Webcam is dead.  During the launch of software or application, the light (hardware access) but will immediately switch with loop No.-camera photo/camera.

  It does NOT work.

  Try opening Windows camera - and I can look at device manager freak out and flash camera, without camera, camera, no camera... over and over.  If I turn off the device, then the application stops sending looping error messages and said without a camera. (yes I know I disabled it, but the loop tells me that it is a specific driver problem).

  I uninstalled the device, permis allowed Windows to detect, yet install base driver. Now instead of HP TrueVision HD, in Device Manager it detects USB video device.

  I need to find a COURSE working DRIVER for HP TRUEVISION HD WEBCAM

  I visited every thread on this forum, visited each Microsoft talked to YouCam, thread AND to HP, I was told to factory reset my laptop, but after 4 times by HP USB restore factory reset did not work.  I didn't want to send in my laptop, it is a driver issue, which is quite clear.

  Where can I find a driver, no - only the driver software?

  Thank you.

  Hi @petako,

  Thank you for your super fast response. I review the post. Please try to install a compatible driver from this link: http://support.hp.com/us-en/drivers/selfservice/hp-envy-15-as100-notebook-pc/12499192/model/13386595#Z7_3054ICK0K8UDA0AQC11TA930C7

  Go to "Input devices" and "HP TrueVision Full HD (FHD) RGB - IR Webcam Driver" from the link to download and install it.

  Need a compatible driver for your webcam.

  Please visit this link to install the Youcam software: http://support.hp.com/us-en/drivers/selfservice/hp-envy-15-j100-quad-edition-notebook-pc-series/6521359/model/6521361#Z7_3054ICK0K8UDA0AQC11TA930C7

  Go to "Multimedia software" and "Software Cyberlink YouCam" from the link given below to download and install it. Link: http://support.hp.com/us-en/drivers/selfservice/hp-envy-15-j100-quad-edition-notebook-pc-series/6521359/model/6521361#Z7_3054ICK0K8UDA0AQC11TA930C7

  I hope this helps! Please let me know how it goes. If it helps, please mark this message as "'Accept as Solution". " If you need help, let me know and I will gladly make all that I can to help. If you want to say 'Thank you' for my efforts help, click the ' Thumbs Up ' to give me a Kudos.

  Take care and have a wonderful week ahead.

• Problem of liquid E700 Acer when the music is playing in the car

  Whenever I connect my acer e700 to my car to listen to music in the car, the music seems to stop, then I manually play it again, then it stops again. So I went back to the phone and got a replacement and hope that the problem would be resolved, but the same thing happened (Im using the pre-installed music btw player)

  At first, I thought it was my power cord (connecting the phone to the car) for pla music, but the problem is not the power cord because my old samsung y duos plays music in the car without stopping or problems at all.

  I also tried to download a free music player (AUDIO STREAM), it seemed to diminish stop the music but a few songs always stop when is played in the car.

  Any thoughts on why this is happening? My opinion is that this phone, the Acer Liquid E700, (I mean all of it) is partly defective and cannot play music hen plugged the car wihtout stop smoothly.

  I bought the E700 liquid Acer a few days ago. And I had the same problem. On Spotifu, the music just stops after a short time I was playing in the car, connect my phone via a cable to the stereo in my car.

  I found a workaround to the problem. It seems it has something to do with DTS, which must be introduced in Middle > DTS Studio Sound. When you turn off this setting the music no longer stops. When you do not want that it turned on, do not set the volume of your phone up, but around 70 percent level. You can then increase the volume of your car stereo to adjust.

  It is not a solution to the problem, but it is at least a workaround until Acer solves this problem.

  I hope this helps.

  Dan

• I have a problem with my canon cam works only not with the eos unility now

  OK I use to connect my cam and it worked fine until the last update and now it has stopped working, I've been on with cannon and put to update the software and they say it's a problem with vista 64, do not leave the work of software he will work with the computer, but not the eos utility they told me to remove the key from the vid but donty know how

  Monday, January 31, 2011, 20:35:31 + 0000, tank5700 wrote:

  OK I use to plug my cam and it worked fine until the last update and now it has stopped working, I've been on with cannon and put to update the software, and they say it's a problem with vista 64, not to let the work of software it will work with your computer
  but not the eos utility they told me to remove the key from the vid but donty know how

  You ever need connect your device directly. Buy a card reader for
  the type of flash card your camera uses (they are cheap).
  Place the flash card and plug it into a USB port.

  Personally, I prefer to do it this way. It is easier and does not use
  the camera battery. I have both these card readers - one I keep on
  my desk, close my desktop computer and another that I keep in my
  Bag for laptop to use when traveling.

  Ken Blake, Microsoft MVP

• Camera blurry

  Each photo clicked is not clear, and when zoom the image is blurred. Please give me some suggestion what should I do?

  @Zuber1

  The front facing camera sound of course not as great as the main camera, sensor of its small enough and his only 2.2mp, to the extent where the camera back, the problem is that its scratched, even once, you need to replace the camera module.

  If it has not been struck out, you can take amazing pictures with the Z3.

• Problems with importing video camera mini dv JVC

  I turn on my camera and put it on the playback mode. I have IE 1394 plug in my port on the camera and the pc. I open windows dev and click Import from digital video camera. A noise of error made. A message appears "import video is already launched and running on this computer. You cannot start another instance of import video until the first instance has stopped. To correct this issure, wait for the video to be import, close import video, wait a second w fe then start import video. »
  I'm doing this, but I know that I do not have started to import anything. I can sit there all day and wait and try again and again and the same message appears. I also tried to restart the pc and start the process again. Same thing is happening. I tried on my friends laptop same thing occurs. I recorded it before on a destop with another type of fire wire but my laptop cannot use the 1394 cable.

  I turn on my camera and put it on the playback mode. I have IE 1394 plug in my port on the camera and the pc. I open windows dev and click Import from digital video camera. A noise of error made. A message appears "import video is already launched and running on this computer. You cannot start another instance of import video until the first instance has stopped. To correct this issure, wait for the video to be import, close import video, wait a second w fe then start import video. »
  I'm doing this, but I know that I do not have started to import anything. I can sit there all day and wait and try again and again and the same message appears. I also tried to restart the pc and start the process again. Same thing is happening. I tried on my friends laptop same thing occurs. I recorded it before on a destop with another type of fire wire but my laptop cannot use the 1394 cable.

  ==========================================
  Maybe the following will help:

  Windows Vista-
  Import video from a videotape
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Import video in Windows Vista
  http://maximumpcguides.com/Windows-Vista/import-video-in-Windows-Vista/

  Download video from your camera to your computer
  http://www.Microsoft.com/windowsxp/using/MovieMaker/getstarted/DLmovies.mspx

  Windows Vista-
  A problem of import
  files in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker
   
  Windows Vista-
  Troubleshoot importing video problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems
  Windows Vista-
  Importing files into Windows Movie
  Manufacturer: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/importing-files-into-Windows-Movie-Maker-frequently-asked-questions

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Problems with my bb8520 camera blackBerry Smartphones

  I can't open my bb8520 camera app. It says that I need to first close all other applications, but the continuous problem. What can I do?

  With the BlackBerry device under voltage, remove the battery for a minute, and then reinsert the battery to restart.

  Now, try the camera again.

• Problem on update to Camera Raw 6.7

  I have a problem when updating to 6.7 cab with my PS CS6. I opened the error log which shows "Photoshop Camera Raw 6.7 Update Installation failed. "Error code: U44M1P7. If anyone can help?

  I don't know that you have CS6, starts with Adobe Camera Raw 7.1 you probably CS5

  The CS5 updater is broken. You must manually download and install 6.7

  Adobe - Photoshop: for Macintosh: Camera Raw 6.7 update

  Adobe - Photoshop: for Windows: Camera Raw 6.7 update