Problem with connect Ethernet camera or vision Builder

Similar Questions

• Problems with ports ethernet E4200

  I have problems with my ethernet ports on my router E4200 V1.  I do not get on flow rate of 12 Mbps on a single connected wired computer.  If I replace it with a simple switch 5 port I get 60 Mbit/s using the same cables.  I looked through the creation and cannot come up with any solution.

  Any help would be greatly appreciated.

  Thank you

  Mike

  OK I tore across the network.  Started from scratch and found the problem.  It is quite strange, but everything works fine!

  I discovered through the process of elimination that the cisco router did not like my Panamax Lan UTP.  Cisco is apparently more strict with the signal than the simple switch or refurbished netgear router.  I had the protection on the power strip 6 Max near the iMac.  The totally weird part is that slowed down the entire network.  Streaming is now pending on 60Mbps at each connection to the local network.

  Thank you all for your time I walked through this weird problem.

  Mike

• I have a problem with connecting to Skype, get error code 1001 on my event viewer

  I have the latest version of Skype installed and have not been able to connect. I had Skype for over a year and my computer has developed a problem with a memory stick and after that I came back from the repair shop, it didn't work. They had removed Skype from my system so I reinstalled and cannot connect.

  And this is related to the Windows XP files, folders and search for how?

  Ask here:

  SKYPE FORUMS:
  http://Forum.Skype.com/

• Strange problem with connectivity

  I had this problem with one of my computers I'm trying to connect to my router ea6500. I have several wired devices and wireless but who are working very well, the router gives me the questions recently and I had to get back to the form of the plant. Once I had setup the configuration again, one of my computers which had run fine before has an interesting question.

  The computer appears in my router with it's normal internal IP address. And my computer is saying that it is correctly connected to the internet. The question? It is not. All my other computers and devices are excellent connections without interruption of service whatsoever. No idea what could cause this kind of problem?

  After crossing, my pilots had messed up a stored parameter which was preserved through updates to pilot. I had to uninstall and reinstall the driver for my machine to fix manually Ethernet controller.

• I have a problem with my canon cam works only not with the eos unility now

  OK I use to connect my cam and it worked fine until the last update and now it has stopped working, I've been on with cannon and put to update the software and they say it's a problem with vista 64, do not leave the work of software he will work with the computer, but not the eos utility they told me to remove the key from the vid but donty know how

  Monday, January 31, 2011, 20:35:31 + 0000, tank5700 wrote:

  OK I use to plug my cam and it worked fine until the last update and now it has stopped working, I've been on with cannon and put to update the software, and they say it's a problem with vista 64, not to let the work of software it will work with your computer
  but not the eos utility they told me to remove the key from the vid but donty know how

  You ever need connect your device directly. Buy a card reader for
  the type of flash card your camera uses (they are cheap).
  Place the flash card and plug it into a USB port.

  Personally, I prefer to do it this way. It is easier and does not use
  the camera battery. I have both these card readers - one I keep on
  my desk, close my desktop computer and another that I keep in my
  Bag for laptop to use when traveling.

  Ken Blake, Microsoft MVP

• I have problems with connecting by Modem DSL Siemens SpeedStream 4100.

  I have a little problem with my modem. I have a strange situation in which my internet goes several times a day (about 50-200 a day / every 10-15 min). I can't find the answer as to why this happens, however I noticed that whenever I get a phone call, my internet will. So that I get my signal back I have to make a phone call, so I just call my house to get a busy tone. My internet will come back without a doubt, but I don't think it's fair to make this happen. What could be the reason for these problems and how I could fix them? I have a PPPoE Setup so I am connected through a router, however, this problem happened a long time ago (I don't remember if it is since I have the modem). I'm in a laptop, but the question that's happened since a direct link between the modem and my desktop via cable Ethernet.

  Its been years and I have still not found a reason as why it happens. I know several people who have the same problems as me, and I would like to have days when my internet doesn't go away every 10-20 minutes. Any suggestions why this is happening or how to fix?

  Thanks, best regards

  Paul Zapata

  http://en.kioskea.NET/forum/affich-19259-router-disconects-when-phone-gets-used

  Read the above.

  Do you use a junction box on the phone, including extensions of each phone?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Here are the General news when Internet is de-energized;

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with connecting to Windows normally

  OK, so I'm having a problem with a record in my laptop normally and the only way I can get to it is by going to safe mode.

  Basically what happens is that whenever I try to connect my computer normally (not in safe mode) I'll type in my password press enter it will come with the welcome sign and this small circle that tells it to load but it never is as if this drive does not work because the lamp flashes not or anything like that. However, it is very well whenever I login in safe mode and that the laptop came with windows vista on it that I don't have a copy of windows vista to try and slove the problem. This problem acerd after I restarted my laptop because it was slow and contributing generally to make it work properly again, but now this has happened and I don't know what to do.

  If someone could help me? I really need my laptop back to normal because right now, it's my only access to internet that not working I really on heavly for my college.

  Thank you for taking the time to read this and thanks for teying to help me.

  Hi Lexiey,

  A. recent changes made on your computer?

  B. you get any error message?

  You can start in safe mode, and then you put a computer to boot and then restart the computer in normal mode controls whether the issue persits.

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer in normal mode and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode. Uninstall or update the program that is causing the problem.

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Problems with D7100 and Camera Raw

  I can't open the .nef files saved on my HARD drive with the D7100, happens with CS6, 4.4 LR and LR beta 5.  However, if I have the card connected to the PC I can import into both versions of LR and then be able to edit them in CS6 ranging from LR.  I tried to uninstall and reinstall CS6 and LR 4.4, but no difference.  I use Windows 7 Ultimate.  Any suggestions?

  How you import raw images to the computer? Using Adobe Photodownloader or Nikon Transfer? Older versions of Nikon Transfer give problems with new cameras.

  You probably have the latest version of Camera Raw for CS6? It should be version 7.4 to read D7100 files. Check the version of Photoshop (help > about Plug-ins).

  7.4 update, use the Help menu of Adobe Photoshop/Bridge updates option.

• I am expierencing problems with my isight Camera on my MacBook Pro. Suddenly the video camera does not start (no green light on) FT or Photo Booth. The screen is black, if I restart computer it works but after closing the lid, it stops. V10.11.3

  I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer.  I use V10.11.3. An idea about what is happening

  Hello mpm068,

  Thank you for using communities of Apple Support.

  Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Take care.

• Problems with the Ethernet controller and PCI Satellite L30-10 X device driver

  HelloW!

  Sorry for my bad English, I'm from the Russia.
  A few days ago, I bought Satellite L30 - 10 X with W Vista on board. In my opinion, that this OS does ' t very good on this computer, so I install W XP.

  I have some problems with drivers. At first, I don't know which model I have: PSL30 or PSL33? I have download all the drivers for the two models. But after installation, computer doen't find the drivers for the Ethernet controller and PCI device...

  Hello

  Satellite L30-10 X belongs to the series of PSL33E. This number located on the label on the bottom of the device!

  You must choose this number in the form of driver download for XP compatible drivers.
  I put t know why you are not able to install the LAN driver. I have the same laptop with Vista and I've install the XP and all the drivers will work perfectly.

  I assume that you have installed the drivers in the wrong order. Please take look in the Toshiba installation instructions txt file. In this order, install the driver! This is important.

  I think that you should install XP again to ensure that the registry clean, then download and install the XP drivers compatible as mentioned in the installation instructions file.

  Good luck

• Problem with connection for ePrint

  Hello
  
  Today, I brought a new printer - all in one, HP Deskjet INK Advantage 3520. All functions are OK, but I have a problem with ePrint.
  In practice, the printer is connected to my wifi at home and I can print without USB cable with no problems. But when I want the ePrint of installation function, I get an error that the printer do not have any internet connection and I can't complete the configuration of the service.
  
  Do anyone know how I can eliminate the problem?
  
  Thank you
  Denis

  Hi DenyKr,

  I see that you are having problems with your printer, connecting to web services.  I would like to try the following steps.

  1. open the internet browser type printer IP address.

  2 should bring you to the status of the printer page.

  3. Select the tab network at the top.

  4. left side select IPv4 under wireless.

  5. under DNS address Configuration select manual DNS server.

  6. for favorite enter 8.8.8.8

  7. for alternate enter 8.8.4.4

  8. Select apply. You can get a warning saying that this could break the connection which is very good.

  9. turn the printer off for about 30 seconds, then try again.

  Let me know how it goes.

• a lot of problems to connect my camera to the computer

  Hello. I use a USB cable to connect my camera to my computer. When I plugged the camera, windows said that a new found.and of material after only a few seconds, said that your new hardware is installed and ready to use.but at this time the windows reset without any windows alarm.when start-up and I tried to go to my user account, the computer is locked, and after a few minutes I reset. When windows started again and I tried to go to my user account, he says your files and folder lost and create a temporary account for me. After that when I plug in usb cable to my camera to the computer, it does not work and windows could not recognize my camera. I reconnected as administrator and delete my account and create a new. but the files of my older account which was on drive C are not accessible and that they don't remove it from the computer.  I have already installed microsoft security essential and it is up to date. my windows is XP sp3. Idon't think that my computer to the virus. Please help me .thank you.

  Hello

  I suggest you run restore the system to an earlier date when the camera was working properly.
  Here is an article on the hoe for this: http://support.microsoft.com/kb/306084
  Do you see any other matter with he performance of the computer?

• Pavilion dv4-2170-us has problem with connection light display

  The cover on my laptop seems to have a bad connection, because I have to play with the angle to get the screen to

  show anything.  Sound very, very delicate.

  Is this something that can be fixed by a tech or should I get a new laptop?  I'm asking because there is another nother

  problem with function of my computer.

  HI @compugirl ,

  I understand this thing you display may have a bad connection that you have to play with, then fish on the screen to show the line.

  Want to know if this could be fixed by a tech.  The short answer is Yes.  Here is a link to 2009decembre 17 December 17, 2009 HP Pavilion dv4 Entertainment PC Maintenance and Service of Guide. Please note Chapter 3 page 3 for a list of the replacement screens supported by number of the part.

  It may just be a connections loose as you said, either a bad connection cable...  The cable may have become defective through the opening and closing of notebook, during normal use.  Please note Chapter 4 page 27 for the removal of the screen procedure.  Before considering the replacement of the screen, I would try a new cable first to exclude it.  You should be able to buy the cable to any computer supply store.

  I hope this has helped.

• Problems with importing video camera mini dv JVC

  I turn on my camera and put it on the playback mode. I have IE 1394 plug in my port on the camera and the pc. I open windows dev and click Import from digital video camera. A noise of error made. A message appears "import video is already launched and running on this computer. You cannot start another instance of import video until the first instance has stopped. To correct this issure, wait for the video to be import, close import video, wait a second w fe then start import video. »
  I'm doing this, but I know that I do not have started to import anything. I can sit there all day and wait and try again and again and the same message appears. I also tried to restart the pc and start the process again. Same thing is happening. I tried on my friends laptop same thing occurs. I recorded it before on a destop with another type of fire wire but my laptop cannot use the 1394 cable.

  I turn on my camera and put it on the playback mode. I have IE 1394 plug in my port on the camera and the pc. I open windows dev and click Import from digital video camera. A noise of error made. A message appears "import video is already launched and running on this computer. You cannot start another instance of import video until the first instance has stopped. To correct this issure, wait for the video to be import, close import video, wait a second w fe then start import video. »
  I'm doing this, but I know that I do not have started to import anything. I can sit there all day and wait and try again and again and the same message appears. I also tried to restart the pc and start the process again. Same thing is happening. I tried on my friends laptop same thing occurs. I recorded it before on a destop with another type of fire wire but my laptop cannot use the 1394 cable.

  ==========================================
  Maybe the following will help:

  Windows Vista-
  Import video from a videotape
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Import video in Windows Vista
  http://maximumpcguides.com/Windows-Vista/import-video-in-Windows-Vista/

  Download video from your camera to your computer
  http://www.Microsoft.com/windowsxp/using/MovieMaker/getstarted/DLmovies.mspx

  Windows Vista-
  A problem of import
  files in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker
   
  Windows Vista-
  Troubleshoot importing video problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems
  Windows Vista-
  Importing files into Windows Movie
  Manufacturer: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/importing-files-into-Windows-Movie-Maker-frequently-asked-questions

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• HP 655 update to windows 8.1 problem with Realtek ethernet driver

  Hello

  I do an update for Windows 8.1 and now I have a problem with the Realtek ethernet driver, which does not. If I look in Device Manager I see an error for Realtek ethernet driver:

  "Your computer's system firmware includes enough information to properly configure and use this device.  To use this device, contact the manufacturer to obtain a firmware or an update of the BIOS of your computer. (Code 35) »

  I have the latest version of the bios: F.26

  I try to install the driver from the HP site: 8.3.730.2012 HP driver

  also I try with the Microsoft driver: 8.1.510.2013

  Ethernet works fine in any other OS.

  Thank you for you time and I hope that solutions to this problem.

  @all

  Install the new Bios for HP 655 compatible sound

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Realtek-Ethernet-driver-error-code-35-Compaq-CQ58-Windows-8/m-p/3208099#M53864

  655 HP

  Updated HP Notebook System BIOS (AMD processors)

  Version: