Problem accessing the Web Analysis Document
Hello
I created a document for web analytics users can open the workspace. I am trying to assing correct users supply so that they can open the document, but I am not able to do. Users already have access to the folder where the document (they are able to open other files that are in the same folder). Statement of Directors are able to open the document. How to configure all other users of the database (not adinistrators)?
Basic users have the following reports, assigned shared services roles: Analyst, Viewer to dynamic, Explorer, runner work, personal page editor, editor of personal settings, Viewer.
Administrative users have the following roles for reporting: reporting and analysis administrator.
Basic users are not supposed to be able to delete and move documents.
The minimum base users need to open the Web analysis report seems to be "Content Manager".
Tags: Business Intelligence
Similar Questions
-
WRT110-problem accessing the Web-based Setup Page
I can't access the configuration page based on web for the WRT110 router I have. I am able to make a connection on two computers without the router, but when I add them I get an error message in my browser.
I tried to access the configuration page based on the web both of my computers and some information were followed by Ecritel.net, but I'm having no luck. I receive the following error message "missed connection: connection to the server was reset while the page is loading." The network link was interrupted for negotiating a connection. Please try again. »
Any advice would be greatly appreciated! Thank you!
Actually, I get a different error message now. I made a few adjustments to things like the start menu, which is a problem before. Here is the new error message I received:
Network timeout Server 192.168.1.1 takes too long to respond. The requested site did not respond to a connection request and the browser has stopped waiting for a response
Can experience the high demand server or a temporary outage? Try again later.
Are you unable to navigate to other sites? Check the computer's network connection.
Is your computer or a network protected by a firewall or proxy? Incorrect settings can interfere with browsing the web.
Still having trouble? See your network administrator or your Internet service provider for assistance.
Someone at - it ideas? I searched on the Internet, but nothing I've tried works. Thank you in advance!
-
Urgent: Could not start the Web analysis services
Hello Experts,
I have problems starting the Web Analysis Services. Not able to start the Web analysis services
from weblogic with the Java version:
version Java '1.5.0.07 '.
Java (TM) 2 Runtime Environment, Standard Edition (build 1.5.0.07 - _20_mar_2007_05_31)
Java hotspot Server VM (build 1.5.0.07 mixed jinteg:03.20.07 - 11:05 IA64, mode)
WLS starting with line:
/opt/java1.5/bin/Java-serveur-Xms256m-Xmx512m - XX : MaxPermSize = 128m-Dhyperion.home=/hyphome/Hyperion-DESS_ES_HOME = / hyphome/Hyperion/BIPlus/appsinfo/WebAnalysis/EssbaseJAPI - Datf.session.binding.kill-avec-préjudice = vrai-Dweblogic.j2ee.application.tmpDir=/var/tmp/hyperion-Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0-da-Dplatform.home=/hyphome/bea/weblogic91-Dwls.home=/hyphome/bea/weblogic91/server-Dwli.home=/hyphome/bea/weblogic91/integration-Dweblogic.management.discover=false-Dweblogic.management.server= http://localhost : 7001 - Dwlw.iterativeDev=false-Dwlw.testConsole=false-Dwlw.logErrorsToConsole=-Dweblogic.ext.dirs=/hyphome/bea/patch_weblogic910/profiles/default/sysext_manifest_classpath-Dweblogic.Name=WebAnalysis-Djava.security.policy=/hyphome/bea/weblogic91/server/lib/ WebLogic.Policy weblogic. Server
< 6 January 2010 12:28:36 IST > < Info > < WebLogicServer > < BEA-000377 > < start WebLogic Server with the Version of machine virtual Java hotspot Server 1.5.0.07 jinteg:03.20.07 - 11:05 IA64 Hewlett - Packard Company >
< 6 January 2010 12:28:37 IST > < critical > < WebLogicServer > < BEA-000362 > < server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: cannot get a lock on hyphome/Hyperion/deployments/WebLogic9/./servers/WebAnalysis/tmp/WebAnalysis.lok. Server may already be running
at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:159)
at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:59)
at weblogic.management.internal.DomainDirectoryService.start(DomainDirectoryService.java:82)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:365)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:116)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:630)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
in weblogic. Server.main (Server.Java:67)
>
< 6 January 2010 12:28:37 IST > < opinion > < WebLogicServer > < BEA-000365 > < changed failed State Server >
< 6 January 2010 12:28:37 IST > < error > < WebLogicServer > < BEA-000383 > < is not an essential service. The server will shut down >
< 6 January 2010 12:28:37 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to FORCE_SHUTTING_DOWN >
Any suggestions would be a great help. Thanks in advance.
Kind regards
Sudhir
Edited by: 637223 January 6, 2010 13:54Are you sure there's not another web analytics web application processes running, have you checked the processes running on the machine, you will need to kill or stop one of them to release the lock.
See you soon
John
http://John-Goodwin.blogspot.com/ -
Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?
It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.
Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.
-
I have Norton AntiVirus by Comcast and it does not start because of a "connection problem". The only thing I could find wrong was the question would not access the web. I deleted a user account, a couple of days, but do not know if that would do anything.
Hi IrishStew,
You can see the article in order to analyze the logs of System File Checker.
How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
http://support.Microsoft.com/kb/928228
Since Internet Explorer works fine with mode safe mode with networking, you can perform the clean boot to see if a third-party service is causing this issue.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a troubleshooting follow step 7: reset the computer to start as usual
-
Help, please! Cannot access the web after connected to the VPN
Hello
I'm a newbie on Cisco products. I configured a Cisco ASA 5505 with VPN firewall. However, I can't access the web after I connected to the remote IPSec VPN. I also cannot connect to the bands using the intellectual property. But I can connect to the internal servers in the office with no problems.
Here is my setup, can someone help please? Thank you very much
ASA Version 8.2 (5)
!
host name asa
xxxxxxxxx.com domain name
enable the encrypted password xxxxxxxxxxx
xxxxxxxxxxx encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
passive FTP mode
area of zone clock - 8 schedule
clock summer-time recurring PDT 1 Sun Apr 02:00 last Sun Oct 02:00
DNS lookup field inside
DNS server-group DefaultDNS
Server name 107.204.233.222
name-server 192.168.1.3
xxxxxxxxx.com domain name
inside_nat0_outbound list of allowed ip extended access all 192.168.1.96 255.255.255.240
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
IP local pool sc-192.168.1.100 - 192.168.1.110 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 192.168.1.0 255.255.255.0
NAT (inside) 1 0.0.0.0 0.0.0.0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 192.168.1.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
interface ID client DHCP-client to the outside
dhcpd outside auto_config
!
dhcpd address 192.168.1.5 - 192.168.1.36 inside
dhcpd dns 107.204.233.222 inside the 192.168.1.3 interface
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal strategy group xxxxxxxx-sc
attributes of xxxxxxxx-sc group policy
value of 107.204.233.222 DNS server 192.168.1.3
Protocol-tunnel-VPN IPSec
XXXXXXXXXX.com value by default-field
xxxxx xxxxxxxxxxx encrypted password username
Strategy Group-VPN-xxxxxxxx-sc
remote access to tunnel-group xxxxxxxx-sc type
attributes global-tunnel-group xxxxxxxx-sc
address sc-pool pool
Group Policy - by default-xxxxxxxx-sc
tunnel-group xxxxxxxx-sc ipsec-attributes
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
call-home service
anonymous reporting remote call
call-home
contact-email-addr [email protected] / * /
Profile of CiscoTAC-1
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:5c1c99b09fb26fcc36a8bf7206af8e02
: end
Hello
Try adding the following commands
permit same-security-traffic intra-interface
NAT (outside) 1 192.168.1.96 255.255.255.240
Is there are always problems with VPN then I would maybe change VPN pool to anything other than something that comes into conflict with the LAN.
In this case, these configurations should do the trick
In order from top to bottom, they would do the following things
- First remove the pool VPN and VPN configurations
- Then remove the VPN pool
- Remake of the VPN Pool with different network
- Reattach the VPN pool for VPN configurations
- Configure NAT0 to the new cluster of VPN
- Remove the old line of the ACL of the configuration of NAT0
attributes global-tunnel-group xxxxxxxx-sc
no address-sc-swimming pool
no ip local pool sc 192.168.1.100 - 192.168.1.110 mask 255.255.255.0
IP local pool sc-192.168.2.10 - 192.168.2.254 mask 255.255.255.0
attributes global-tunnel-group xxxxxxxx-sc
address sc-pool pool
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
no access list inside_nat0_outbound extended permits all ip 192.168.1.96 255.255.255.240
Of course you also have the NAT configuration for VPN pools new Internet traffic
NAT (outside) 1 192.168.2.0 255.255.255.0
Please rate if the information has been useful if this resolved the issue as mark responded.
-Jouni
-
error message "there is a communication problem with the web server."
I'm trying to connect to three rivers FCU website www.3riversfcu.org and I get the message error "there is a communication problem with the web server." I am running Windows 7 on Toshiba laptop. No idea how to solve this problem? Something in the settings?
Hi, Mayhem15,
See if this troubleshooting help. It was written for Windows XP, but in many cases, these documents still apply for more recent versions of Windows.
How to troubleshoot possible causes of Internet connection problems in Windows XP
-
The user cannot access the web analytics
I can't a user unable to access the web tests. When the user attempts to log in they get an error box will appear with "an error occurred during initialization of the boot options.
I heard that this may be because of outdated java, so the machine has been updated, but the problem persists.
any ideas guys?
Thank you very much
RussellThis problem occurs mainly due to user 'null '.
You can try the following:
1. service and return the available to the user.
2 delete and re-create the user.
3. ensure that the user is able to connect to the workspace. -
Foxfire logo does not appear on my toolbar so I can access the web!
When I first accessed the site of Foxfire it seems only three steps to access the web. (wait 1) download 2) Guest to pull logo to the toolbar to access the web. I'm still waiting!
Make sure that Firefox is installed correctly.
Open the Firefox disk image (DMG) file and drag the Firefox program in the folder of the application on your hard drive.
You should not double-click the Firefox application to run from the disk image and drag it out of the DMG file instead. -
Since the installation of the latest update on my iPad, I'm unable to type a new address in the address bar of Safari. I can access the Web sites of my favorites, but when I press the address bar Safari closes its doors.
I reset holding home and power button at the same time. I did that 4 times. I also left all the settings.
I am also unable to access the server from imessage. I don't know if these two things are related, but the two that happened after the update to iOS 9.2.1
Since this announcement, I found a Reddit thread that suggests a temporary solution by disabling Safari suggestions. It worked for me.
-
Any time I try to access the web site GOOGLE, this message 404 not found (nginx)
Any time I try to access the web site GOOGLE, this message appears.
Any suggestions as to what is the cause and what is the fix.
Thank you
Hi LindaPhillion,
- Did you the latest changes on the computer?
- What web browser do you use?
- Are you having similar issue with any other search engine?
You will usually receive this error when Internet Explorer is able to connect to the website, but the webpage cannot be found. This error is sometimes caused because the webpage is temporarily unavailable or that the Web page has been removed.
Get help with the Web site (HTTP error) error messages.
http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-website-error-messages-HTTP-errors
Note: Above article also applies to Windows XP.
Note: Try the step only if you are using the web browser Internet explorer below.
Refer to the article below and try the steps mentioned, check if it helps.
How to optimize Internet Explorer
-
Limiting who can access the Web portal
Is it possible that I can put a restriction that may and may not access the web portal. I work in a doctors office, I want doctors to be able to access their terminal server from home sessions, but I don't want the Office staff to have the opportunity to do so. Anyone know how I would go about setting up these restrictions? I am running Version 7.6
Made two Applications to manage.
Make two groups of ads, one for physicians and one for everyone else.
Assign each group to another managed Application.
Do target a device address for the subnet of the office IP range and this applies to the Application to handle for office staff.
Now, when connecting doctors that they get their own icon to any place of the network they run and the office staff only get an icon in the network of the company.
-Greg
-
SX10 - how to access the web interface behind a firewall
Howdy
I have a very simple configuration, router and behind her SX10. I can't access the web interface of the remote unit. Is there a port that I need to activate or something?
When the device was connected directly to the modem, with the public IP address, I was able to connect to the web interface.
any suggestions here?
I enter anything in the field AllowRemote.
Thanks in advance!
Web interface can be accessed using HTTP ether (80) or HTTPS (443). To you how you want to deploy, but you can use NAT on the router, port forwarding, or even put the SX10 in DMZ on the router.
-
cannot access the web page of WAP but can telnet
Can someone tell me why the following configuration won't let me access the web page of the WAP?
version 12.2
no service button
horodateurs service debug datetime localtime
Log service timestamps datetime localtime
encryption password service
!
hostname EwingWAP
!
logging buffered information
enable secret 5 $1$ z9vV$ M.rY40womPNf7YPOQqC8T.
!
username privilege 15 secret 5 careone $1$ nFXA$ ezjkiBAHeboaKYMzB4hpq.
clock timezone IS - 5
clock to summer time EDT recurring 2 Sun Mar 2:00 1 Sun Nov 02:00
IP subnet zero
!
!
Bridge IRB
!
!
interface Dot11Radio0
no ip address
no ip route cache
!
SSID tsunami
open authentication
Comments-mode
!
base speed - 1.0 2.0 basic basic-5, 5 6.0 9.0 basic-11, 0 12.0 18.0 24.0 36.0 48.0 54.0
threshold RTS 2312
root of station-role
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
Bridge-Group 1 covering-disabled people
!
interface FastEthernet0
no ip address
no ip route cache
automatic duplex
automatic speed
Bridge-Group 1
No source of bridge-Group 1-learning
Bridge-Group 1 covering-disabled people
!
interface BVI1
IP 172.18.86.5 255.255.255.0
no ip route cache
!
default IP gateway - 172.18.86.1
IP http server
IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag/ivor
y/1100
radius of the IP source-interface BVI1
1 channel ip bridge
!
!
Line con 0
line vty 0 4
local connection
line vty 5 15
local connection
!
NTP-period clock 2860650
NTP 208.90.144.53 Server
endHi Jason,
Have you tried the default user name and password?
Username - Cisco
Password - Cisco
Please try the commands below and let me know how it works...
en
conf t
AAA new-model
local IP http authentication
end
Try to open the WEB GUI by using the configured user name and password...
Concerning
Surendra -
I'm unable to access the web browser on your laptop. BT infinity focus.
My daughter is unable to use any type of web browser on your laptop without loading webpages slowly or not at all timeout. Internet connection is fine as programs, such as Spotify, are still working as usual, but browsers often give the message "server sent no data."
Hello
(1) did you make any changes before the show?
(2) you receive an error message?
(3) what happens when you try to access the Web sites?
How to optimize Internet Explorer
http://support.Microsoft.com/kb/936213/no
Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
Internet Explorer slow?
It will be useful.
Maybe you are looking for
-
What laptop would be best for Vlogging?
I have a Macbook Air - about 4 years now and still works perfectly. I'm Vlog, (planning to get the Final Cut for the edition) and wonder if a Macbook Pro would serve me better. Any thoughts?
-
I need code for my screen, the laptop is HP Pavilion dv6 - 21 55dx
Please help me I need to know the code of my screen... my screen is wrong and I'll change again by, I need the code of my laptop screen, the model is HP dv6-2155dx clubhousePlease needThanks in advance
-
iTunes is running but not visible in Windows 10 icon
iTunes works fine, but the window does not appear. When I run iTunes, I don't see anything. The task manager says it is running, but it does not appear in the taskbar. Do you think that there is a way to make the iTunes icon visible on the taskbar an
-
Printer Deskjet 6540 - no light showing
Printer does not work. All the LIGHTS are OFF but the power cord is connected. Printer was working fine but do not turn on in the morning when we turned on eveything.
-
Get all the images of devices, but how do I know in what images is seclected
Hello in my application I want to show all the images in the first screen, after selecting any image in all we will see in the next screen (full screen) actually I get all images but problem how do I know what image is clicked I used this code... pac