Limiting who can access the Web portal

Similar Questions

• Since the installation of the last update of iOS on my iPad I'm unable to type in the address bar of safari. I can access the Web sites of my favorites, but when I try to enter a new address safari closes its doors.

  Since the installation of the latest update on my iPad, I'm unable to type a new address in the address bar of Safari. I can access the Web sites of my favorites, but when I press the address bar Safari closes its doors.

  I reset holding home and power button at the same time. I did that 4 times. I also left all the settings.

  I am also unable to access the server from imessage. I don't know if these two things are related, but the two that happened after the update to iOS 9.2.1

  Since this announcement, I found a Reddit thread that suggests a temporary solution by disabling Safari suggestions. It worked for me.

• Foxfire logo does not appear on my toolbar so I can access the web!

  When I first accessed the site of Foxfire it seems only three steps to access the web. (wait 1) download 2) Guest to pull logo to the toolbar to access the web. I'm still waiting!

  Make sure that Firefox is installed correctly.

  Open the Firefox disk image (DMG) file and drag the Firefox program in the folder of the application on your hard drive.
  
  You should not double-click the Firefox application to run from the disk image and drag it out of the DMG file instead.

  • https://support.Mozilla.org/KB/installing+Firefox+on+Mac
  • http://KB.mozillazine.org/Installing_Firefox#Mac_os_x

• Connection WIFI mobile phone to the laptop, so I can access the web of the cell

  My laptop is connected to the internet by internet dongle, I want to connect my cell phone to the laptop via WIFI so I can access the Internet from the mobile phone, how to put in place on windows 7?

  You can configure a network hosted with your Windows 7 machine. Here are a couple of free GUI frontends to the netsh commands that implement this. These turn a computer into a virtual router Windows 7 wireless.

  http://virtualrouter.codeplex.com/

  http://www.Connectify.me/index.html

  Assuming that your USB dongle is a device high-speed 3G / 4G, you might also look into buying a router. Some examples...

  http://3gstore.com/index.php?Main_Page=index&cPath=35

  The advantage of the router, it is that you need not the Win 7 PC all the time so that your other devices have access to the public internet.

  MS - MVP Windows Expert - consumer
  "When all else fails try what the captain suggested before you started...". »

• Why "problem loading page" appears when I try to start firefox? I can access the page relevent medium of internet explorer, but firefox cannot connect to the web.

  A few days ago Firefox has stopped working when you use the shortcut or exe. file. The message http://en-gb.start3.mozilla.com/firefox?client=firefox-a & rls = org.mozilla: en - GB:official appears, even if when I paste this address in internet explore it works. What is preventing firefox to connect?

  One possible cause is security software (firewall) that blocks or limits Firefox without you informing on this subject, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox.

  See Server not found - the problems of connection and Configure the firewall so that Firefox can access the Internet and http://kb.mozillazine.org/Firewalls

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• Only when I try to connect to the hotmail Web site, internet explore said that he can not access the Web site?

  I was able to access hotmail account every day except today I tried several times to connect to the site on the Web page, but internet Explorer comes up with the error message that it cannot connect to the Web site.  I tried a diagnostic check on my end, and nothing seems to be wrong.  I can access other Web sites.  I tried the suggested methods to clear my browser which has been online on the microsoft answers site.  Nothing has done so far.

  Status of Hotmail:
  https://status.live.com/detail/Hotmail

  For now, it is said there is a problem:
  "Hotmail is having connection problems. You might see an error message when you try to connect. »

  You can try to check your email at a later date.

  For the taking in charge of Hotmail:

  http://windowslivehelp.com/product.aspx?ProductID=1

• cannot access the web page of WAP but can telnet

  Can someone tell me why the following configuration won't let me access the web page of the WAP?

  version 12.2
  no service button
  horodateurs service debug datetime localtime
  Log service timestamps datetime localtime
  encryption password service
  !
  hostname EwingWAP
  !
  logging buffered information
  enable secret 5 $1$ z9vV$ M.rY40womPNf7YPOQqC8T.
  !
  username privilege 15 secret 5 careone $1$ nFXA$ ezjkiBAHeboaKYMzB4hpq.
  clock timezone IS - 5
  clock to summer time EDT recurring 2 Sun Mar 2:00 1 Sun Nov 02:00
  IP subnet zero
  !
  !
  Bridge IRB
  !
  !
  interface Dot11Radio0
  no ip address
  no ip route cache
  !
  SSID tsunami
  open authentication
  Comments-mode
  !
  base speed - 1.0 2.0 basic basic-5, 5 6.0 9.0 basic-11, 0 12.0 18.0 24.0 36.0 48.0 54.0
  threshold RTS 2312
  root of station-role
  Bridge-Group 1
  Bridge-group subscriber-loop-control 1
  Bridge-Group 1 block-unknown-source
  No source of bridge-Group 1-learning
  unicast bridge-Group 1-floods
  Bridge-Group 1 covering-disabled people
  !
  interface FastEthernet0
  no ip address
  no ip route cache
  automatic duplex
  automatic speed
  Bridge-Group 1
  No source of bridge-Group 1-learning
  Bridge-Group 1 covering-disabled people
  !
  interface BVI1
  IP 172.18.86.5 255.255.255.0
  no ip route cache
  !
  default IP gateway - 172.18.86.1
  IP http server
  IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag/ivor
  y/1100
  radius of the IP source-interface BVI1
  1 channel ip bridge
  !
  !
  Line con 0
  line vty 0 4
  local connection
  line vty 5 15
  local connection
  !
  NTP-period clock 2860650
  NTP 208.90.144.53 Server
  end

  Hi Jason,

  Have you tried the default user name and password?

  Username - Cisco

  Password - Cisco

  Please try the commands below and let me know how it works...

  en

  conf t

  AAA new-model

  local IP http authentication

  end

  Try to open the WEB GUI by using the configured user name and password...

  Concerning
  Surendra

• I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail.

  I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail. I worked around it through another proxy server, but navigation is a pain. does anyone know a solution to this problem? Roadrunner denies that it doesn't clog and so did the modem service here which is telmex?

  [moved]

  I had the same problem 2 weeks while in the Mexico.  I contacted the support TWC and the person to whom I spoke said he had to unlock something.  When he did, all my mail came in Outlook in the spam folder.  It was OK because I got my mail.

  I moved to a different House and now have the same problem again.  I've contacted support TWC and not had much luck. The second level support person and I spent more than an hour, the call of the Mexico using Vontage.  He has not found anything by the previous call that guided him by setting this time.  He said that he would open a ticket and call me in the next 24 to 48 hours.

  Is it reminds and solves the problem, I'll post how it was corrected.

  Amigos audio!

• who can access my private browsing history?

  I was on a web page and I've been on the incognito for some reason any and now I can't access it of course. So I was wondering who would also have access to this story, if I had access to the story that I would be able to access the web page, on which I was. If someone know about this, I would be grateful thanks.

  If you have used navigation private and then closed this window or tab, these data are lost forever. There is no way to recover it.

• BlackBerry Smartphones BlackBerry ID - unable to access the Web Login site

  I have problems logging into App World on the Web site. When I click on loggin it brings me to the BlackBerry ID url that shows the site cannot be displayed or problem loading page due to the connection has expired.

  I tried to go through the site ID BlackBerry (BlackBerry - BlackBerry ID) and App World Store (BlackBerry App World - home page), but I still have this problem. I have tried different browsers (IE 8, Firefox, Chrome, Opera) but no luck.

  App World works very well on my BlackBerry but unable to loggin on the Web portal.

  I tried to contact RIM via Twitter but had no solutions of their own.

  * Update
  I contacted the RIM through my wireless support and discovered his works at their end. I contacted my friend and he was able to connect to the site. There must be something with my ISP connection.

  * Update 2

  I contacted my ISP and they said that they can access the login page of the App World. I tried my VPN connection and it works. I still don't understand why I can't access it without VPN

  I need to know what prevents it from my computer. Well, I'm done.

• Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

  Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

  It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

  Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.

• Then I can surf the web on the phone with Verizon?

  I waited for the iPhone 6 out hoping I can surf the web while talking on the phone. This weekend I had a new 6s and I can't do that.

  When the 6 came out, I swear I've read somewhere (but of course can't find it now) that it is now enabled if you have Verizon as your carrier. I think that Verizon has been the only person who was not what allows with the iPhone for some reason any (probably) ridiculous.

  I CAN do it over WiFi but not LTE. I want to be able to leave my house and I can do that.

  Before I called Verizon and give them *, I thought to double check here so I have plenty of info to yell at them with if I'm right.

  If someone has a link to the info, I would be happy as well.

  Thank you guys!

  You must confirm with Verizon you have VoLTE (voice over LTE) enabled on your account. Then go to settings > phone > turn on LTE and make sure that it is set to voice & data. Then, while you're on the LTE network, you will be able to talk on the phone and use data at the same time.

• Can someone tell me how I can access the internet on my laptop to someone else's House?

  I want to take my computer on a visit, I can access the internet at home someone else with their supplier?

  Hi Huw,

  If it is a WIFI connection and they provide the access codes and Setup appropriate (and maybe even if they are not depending on how they are configured), it should be no problem.  You will probably need to create a new connection to connect to their network and possibly another new connection to connect to internet (if they are separated).  I created portable work of my wife to work from home in less than 5 minutes.

  If you need to connect with a cable, then you need a cable and they need a way to connect to their network or their internet connection or even a computer connected to the internet connection can be used by ICS to give you access (even once, after you have setup the proper connections and codes installation).

  The following may or may not be of help (although designed for Vista, you can get the general idea on their part and XP and W7will be similar and you should be able to work out the differences - if not, look how configure wireless internet access in "The BONES" of aid):

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links): http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  Here's a long guide on wireless internet connections in Vista: http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

  Here is an article on how to set up wireless internet in Vista: http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf

  The truth is it is relatively easy and is done all the time by many people.  Think about all the people with laptops who take their origin and work at the same time and maybe even at Starbucks.

  I hope this helps.

  Good luck!

• Update XP Sp2 to Sp3. cannot access the web page update

  The page cannot be displayed

  The page you are looking for is currently unavailable. The Web site may be experiencing technical difficulties, or you may need to adjust your browser settings.

  Please, try the following: Click the Refresh button, or try again later. If you typed the page address in the address bar, make sure that it is spelled correctly. To check your connection settings, click the Tools menu and then click Internet Options. On the connections tab, click settings. The settings should match those provided by your local area network (LAN) administrator or Internet (ISP) services provider. See if your Internet connection settings are detected. You can configure Microsoft Windows to examine your network and automatically detect network connection settings (if your network administrator has enabled this setting). Click on the Tools menu, and then clickInternet Options. In the connections tab, click LAN settings. Select automatically detect settings, and then clickOK. Some sites require 128-bit connection security. Click on the menuhelp and click About Internet Explorer to determine what you have installed the security force. If you are trying to reach a secure site, make sure that your security settings can support. Click on theTools menu, and then click Internet Options. On the Advanced tab, scroll to the Security section and check settings for SSL 2.0, SSL 3.0, TLS 1.0, PCT 1.0. Click the back button to try another link. Cannot find server or DNS error Internet Explorer I can access other web pages OK.

  Burty,

  See... http://support.microsoft.com/kb/265847 this article has been written about products for which microsoft no longer offers support. Accordingly, this article is offered "as what ' and longerbe not updated