Problem adding dynamic sections in a form

Similar Questions

• ScrollPane problem with dynamically added components

  Hi all
  
  I am trying to add a series of 10 ComboBoxes in a ScrollPane one under the other. If the height of each ComboBox is reported as 22 the content mc displays a height of 298 (22 + 9 * 100). After filling the ScrollPane with 10 ComboBoxes, ScrollPane shows an empty space below the last ComboBox. I guess that somehow these components retain their default height (100) when added dynamically.
  
  Example of code at the end.
  
  The result is the same when adding of components such as Button, CheckBox, RadioButton.
  
  Any ideas what could be wrong? How can I make sure of ScrollPane content height of MovieClip is reported as 220 (10 * 22) with exact fitting ComboBoxes ScrollPane?
  
  And Yes, the required components are added to the library. The problem is not that they are not displayed... They display all beautiful... but just the height of the ScrollPane content is more than the actual content.
  

  It's a timing issue. You will need to listen an ENTER_FRAME after adding components - and then update the component ScrollPane;

• create the missing icon against the section of the form of the application instance

  Hi all

  I use OIM 11 g R2 PS2, and I see that create icon missing against the section of the form of the application instance. I am trying to create an instance of the application, and when I try to load the form, I don't see the icon 'create' at all.

  Is this a known problem. ?

  Thanks in advance.

  This changed in OIM 11 g R2 PS2 version. To create resources for the instance of the application, you must follow the steps below:

  1. connect the console to sysadmin

  2. create a sandbox

  3. go in Configuration--> Form Designer--> select the resource type--> click on the button create

  From there, you can create the form. Once the form is created, it will be visible in the Instance, application from which you can modify the same.

  HTH

• Problem adding a folder of images

  Hi, I have been a user of Lightroom 5 for a while now and everything was absolutely perfect, but I now have a problem adding a folder to put the images in LR.  I checked using "Finder" that the images are still there on my external hard drive, which fortunately they are, but when I navigate to that folder in the section "Add files" it shows no images at all, and the 'Import' button is grayed.  There is a new catalog, I created for 2015 customers otherwise the only other change is that I have been preselected a few images using photomechanical moved selected files into a new folder created by me.  Otherwise I have not changed anything else from my usual game to the top.  As a validation test, I tried adding several different sets of RAWS in different folders (which I have previously worked on in other catalogs so I know they were fine before), but I'm having the same problem.  Please can anyone help shed light on what clearly is a bit a killer of productivity right now!  Thank you very much

  DJ - it's a Canon 5 d Mk III, using Lightroom 5.7, and the images are all of the FIRST.  All images have been imported from the map in a folder on my external hard drive, before I used photomechanical to them for review.

  I am pleased to say that the problem is now solved.  I found another thread in forum with many people have exactly the same problem and with various corrections that have worked for them but not for me.  Then I found one that worked for many people - just expand the Destination panel and hey presto - all images appeared.  How weird randomly - I do not know how it was fixed, but there, so now I'm still productive.

  Thanks again to you and Joe for all your interest and your willingness to help - its much appreciated!  I'm now going to edit some pictures

  Nadine

• Dynamic actions against a form of APEX

  I am trying to create a dynamic action on a form that sums the two fields of seizures and places it in a third. Did anyone done this before?

  It works! Thanks for your help.

• When I download the creative application of cloud and he finished it seems to be a bit of problem the app section, it says something like: the installation no longer works. You must uninstall and reinstall the creative cloud. But I already do that and it

  When I download the creative application of cloud and he finished it seems to be a bit of problem the app section, it says something like: the installation no longer works. You must uninstall and reinstall the creative cloud. But I already do that and it doesn't seem to change anything.

  Hello

  Please remove Creative Cloud app and Adobe Application manager using the-

  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• I have problems, adding comments using Adobe reader DC on my pro 3 surface. I can select the circle for example, but when I try to draw the circle nothing happens and the screen just scrolls in the direction I move the pointer?

  I have problems, adding comments using Adobe reader DC on my pro 3 surface. I can select the circle for example, but when I try to draw the circle nothing happens and the screen just scrolls in the direction I move the pointer?

  Hey paulc6148125,

  Please try the mode settings different button in Adobe Acrobat Reader DC-> leModifiermenu-> preferences-> general categories.

  Kind regards

  Nicos

• Problem adding video to Captivate slide

  Hello

  I'm having a problem adding a video file FLV to Captivate. Basically, after that I have published on a SWF file, the video does not appear on the slide at all. It's just empty.

  After searching for a bit, I found that the file FLV MUST include * metadata *.

  However, I added medatada with VLC Media Player, and it still shows the same behavior. There's a certain * amount * metadata? Is there a * type * of metadata without which the video not displayed?

  Adobe help thread talking about what we call the ' Kit Flash video '-which is a stand-alone product or one extension of another product? Is it free? Are there any other free alternatives?

  I'm just very confused.

  Thank you!

  I ended up answering my own question. But just in case this helps someone else, I'll post my solution.

  Essentially, I just re-created the video in MP4 format. Then I used MetaZ (for Mac) to write metadata in the video. Finally, I imported the video as an object and when I posted the video, Captivate it transmutes to the FLV format needed.

  The video is now displayed correctly.

• Sections of the form

  Hello
  
  In the form design Apex are you able to combine sections of your form together and separate them by topics as in the example shown in http://37signals.com/better/fedex/after.html with the numbered titles. You will be asked for a point of view ease of use.

  Rambo79 wrote:
  If an instance of a form with a submit button can be divided between several regions?

  Yes.

  What I don't want is several shapes on the page each with their own "submit" button. Because when I selected just to create region > shape on a view of table etc.

  What it does is actually creates a separate form below?

  It's not what I'm looking for I want just 1 form with sections divided into sub grouped topics or have sections split with H2 tags inbetween each section of the form fields

  Is this possible and if so, how?

  1. create the form region in the first section with all elements, controls, validations and the wizard process.

  2. create the other sections with their titles as HTML (not form regions) regions.

  3. in the tree on the definition of the page, drag the items to required areas.

  OR

  3. click on the button to Edit all in the section items (view of the component) or Edition all in the menu items (tree).

  4. click on the tab reallocate region Elements .

  5 shift elements to the required areas.

• Dynamic LOV in tabular form

  Can someone please tell me if there is an easy way to code one
  Dynamic LOV in tabular form?
  I need the ability to access a column in the row of the table value, to be used in the WHERE clause of the query LOV to another column of the line? Seems
  how it should be easy, but do not find an answer.
  
  Thanks for any help.
  
  Carol

  Hi Carol,.

  You can add the definition of the selection list directly in your SQL using APEX_ITEM statement. SELECT_LIST_FROM_QUERY - see: [http://download.oracle.com/docs/cd/E10513_01/doc/apirefs.310/e12855/apex_item.htm#CHDIDGDA]

  If you run your page with your existing on this subject, first selection list, then do a View Source and find the list of selection, you'll see an attribute "name" of something as "f01" or "f02" etc. Take note of the part number of this.

  Then update your SQL statement to include the above, and using the number you noticed that the Index value (for example, 4):

  SELECT EMPNO,
  ENAME,
  DEPTNO,
  APEX_ITEM.SELECT_LIST_FROM_QUERY(4,MGR,'SELECT ENAME d, EMPNO r FROM EMP WHERE DEPTNO = ' || DEPTNO || ' AND EMPNO <> ' || EMPNO) MGR
  FROM EMP
  

  Which would give you a list of selection of employees in the same Department as the current employee (excluding the employee themselves)

  Andy

• CFIF weird problem with dynamic form variables? Very strange...

  I can't understand what I'm doing wrong here.  Here is my code.  Question explained below.

  < name cfquery = "reviewconfigloader" datasource = "MOLMS" >
  SELECT *.
  FROM dbo. BaseModel
  WHERE the dbo. BaseModel.AccountID = #molmsAccountID # AND.dbo.BaseModel.basemodelActive = 1
  < / cfquery >

  < table width = "100%" border = "0" cellspacing = "0" cellpadding = "3" >
  < cfloop query = "reviewconfigloader" > < cfif AND isdefined("form.baseconfig#reviewconfigloader.basemodelID#") ("form.baseconfig #reviewconfigloader.basemodelID # ') NEQ" "AND (" form.baseconfig #reviewconfigloader.basemodelID # ') QNE 0 > < cfoutput > < tr >
  < td width = "40%" bgcolor = "# F7F7F7" class = "basemodelsub" > #form ['baseconfig #reviewconfigloader.basemodelID #'] # #reviewconfigloader.basemodelName # #reviewconfigloader.basemodelSubName # < table >
  < td width = "15%" bgcolor = "# F7F7F7" class = "basemodelsub" > < div align = "center" > x 14 < / div > < table >
  < td width = "15%" bgcolor = "# F7F7F7" class = "basemodelsub" > < div align = "center" > $486 / year < / div > < table >
  < td width = "15%" bgcolor = "# F7F7F7" class = "basemodelsub" > < div align = "center" > $ 1,444 / year < / div > < table >
  < td width = "15%" bgcolor = "# F7F7F7" class = "basemodelsub" > < div align = "center" > $ 1,444 / 3 yr < / div > < table >
  < /tr > < / cfoutput > < / cfif > < / cfloop >
  < /table >

  What I'm doing here is pretty basic. I'm running a query with a number of configs in it... and then by creating a loop for their output.  Ultimately, I want only the configurations that did not present 0 in the form on the previous page.  Each of the configs in query configuration has a variable of dynamic form on the previous page with a quantity associated with it.  I am trying to remove all the current amounts that are not 0 (or not to eliminate just not see the)... as you can see on the cfif statement.

  This is where it gets weird.  You will notice that I left #form ['baseconfig #reviewconfigloader.basemodelID #'] #, just for the test, which shows me the amount as it should.  I ran a test and put in a couple of 1 s 0 s, 12 s 6 s, etc. in the form fields on the previous page.  If it worked, it would not show anything for the documents with their value by 0 basemodelID.  Not the case.  It shows all the records.  What's funny is that it displays perfectly in my test #form ['baseconfig #reviewconfigloader.basemodelID #'] #, showing good numbers in the previous form, 1, 0, etc., related to each record.  But for some reason, the cfif code isn't catching.

  What's even weirder... I replaced the cfif ("form.baseconfig #reviewconfigloader.basemodelID # ') NEQ 0 with GT 12 (12 has been the largest number I put in shape) and he always showed all the records.  Then I put in as LT 12 and it revealed nothing.  I decided to go one step further and put in to GT 1231243242343 (massive random number), which he always showed all the records.  So, somehow, CFIF statement think that ("form.baseconfig #reviewconfigloader.basemodelID # ') is an incredibly large number, although when I exit in the line below, it is the number, it should be.

  I'm puzzled.  Any ideas?  Thanks in advance!

  Hi Alexander, thank you to try out it... but this errors with error # because just the # emerged from the parenthasis.  So he just bombs.  Let me know if you can imagine than anything else!

  Sorry about that, Jeculture. Christmas factor.

  I unrolled without checking. What he should have said is:

  or

• Problem with dynamic assignment FORM value

  Hi all
  
  I'm moving some coldfusion form variables to a page different cfm.
  
  < cfset tNom = ' #form.taskName # ' >
  < cfset sBy = ' #form.submittedBy # ' >
  
  < name of the form = "emailback" action = "emailFB.cfm" method = "post" > "
  < input type = "hidden" name = "tNameC" value = "#tName #" >
  < input type = "hidden" name = "sByC" value = "#sBy #" >
  < input name = "submitQ" type = "submit" value = "Submit work" > < / make >
  
  On the emailFB.cfm page:
  
  < cfoutput > < strong task >: < facilities > #form.tNameC # < / cfoutput > < br / >
  < cfoutput > < strong > submitted by: facilities > #form.sByC # < / cfoutput > < br / >
  
  Output on the emailFB.cfm page is:
  
  Task: #tName #.
  Submitted by: #sBy #.
  
  Is someone can you please tell me how I can change the value in form.taskName and form.submittedBy to emailFB.cfm page.
  
  Thank you very much in advance,
  
  dulc.
  

  Quote:
  Posted by: cfdoogan
  Remove sharps in your cfset and make sure you have around variables cfoutput tags in hidden entries.

  Not quite.

  The first page should look like THIS works...
  
  
  

  
  

  
  
  
  
  
  

• Problem adding rows in a table

  Hi all

  I'm having a strange problem by adding the lines of the table here. Everything seems to be in place. But when I click the button nothing happens. I worked on tables more complex and added lines safely, but I don't understand what is happening here. I saved the dynamic XML form, interactive form, I put the paging of expandable lines. But heck! It does not at all. I'm totally confused. More more while I drag the table from the object palette, an error and LC closes its doors. But when I click on the table on the toolbar and in the inserted table for it then it shows no errors. What is going on?? Any help is greatly appreciated.

  Script: form1. Page1.Subform1.Button1::click - (JavaScript, client)
  Form1. Page1.Subform1.Table1.Row4.instanceManager.addInstance (1);

  Thank you.

  Sidonie.

  Hi Francine,.

  The version that I have downloaded from Acrobat.com was registered as Static.

  When I saved as a dynamic in the file save as dialog, it worked perfectly. https://acrobat.com/#d= * KWIuuYfTYgasrEr4ERRaw

  Good luck

  Niall

• Problem adding video to iTunes 12.5.1.21

  I've recently updated iTunes to 12.5.1.21. Now, when adding files mp4, iTunes is not placing them in the videos section as before but instead adding them to the music and the ability to change the type of media for movies or TV series does not appear in the tab options to read the information, it is only allows you to change other types of audio files. What is happening with several files. Does anyone know a solution to this problem?

  I tried marking as movies files using the marking software. Files now appear in the correct location in iTunes but will not play again. I use iTunes on windows 10. Also trying to read the videos, instead of display the duration of the video it says LIVE.

• Extensions of floating panels - adding dynamic content

  I work on the Dreamweaver extension and want to create a new floating panels. I am able to create...

  But, I have a (small) problem. Is it possible to add content dynamically?

  For example, let's say I have an HTML page containing a table with a variable number of columns. When the user select the node of the table, I want my extended floating panel automatically adds the column names (based on the thead element > tr > th data) as the new COLUMN NAME < p > < /p >.

  I have (yet) how to obtain the name of the columns... I just need to know if it is possible to add dynamic content in a floating panel and if it is possible, how?

  Thanks for your help!

  Just find the workaround... Instead of adding content, you can use object.innerHTML to set the html code. You can not add, but can completely rewrite the data in the DOM extension

  Thank you for all your help