Problem Boot of Windows 8 error: 0xc000000f
My laptop Asus primer not.
Hello
I suggest you try the method described in the following article:
Hope this helps, good luck :)
Tags: Windows
Similar Questions
-
Original title: problem with Windows XP error print spooler
My printer stopped working (after several years of use); the computer is not even grateful as being installed. Cannot reload the printing software. Tried to download the software of HP, but all that says there is a problem with the print spooler file: error 2: the system cannot find the specified file... (when I try to start it directly)
Hello
1. What is the brand and the model number of this computer?
This problem may occur if a third-party printer driver or an installed third-party service prevents you from adding printers, or if the third-party printer driver or the third party service affects the functionality of a newly installed printer.
To resolve this issue automatically, click the fix for this issue link in the article below. Then click Run now on printing problems and printing errors troubleshooting, then follow the steps in this wizard. If the problem persists, perform the rest of the procedure described in the article.
You cannot add a printer and you receive Printer Spooler error messages in Windows XP
http://support.Microsoft.com/kb/324757I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Boot Manager Windows fails error 0xc000041c
original title: laptop CRASH
I HAVE A LAPTOP TOSHIBA SATELLITE THAT BROKE DOWN. BOOT MANAGER WINDOWS fails to START, WITH AN ERROR CODE OF Oxc000014c, a FILE of the REGISTRY SYSTEM IS MISSING OR DAMAGED. IS THERE A POSSIBLE SOLUTION. I DON'T HAVE MY WINDOWS INSTALLATION DISC.
Hello
Try this
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/
and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable
Contact the computer manufacturer and ask them to send vista recovery discs
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer
Ask them of the exact key sequence
-
I bought the HP ay503tx model that came with the BACK. I downloaded windows 7 x 64 ISO and I got the license with me original. But when I try to install windows 7 via USB it won't let me.
After the boot from USB, it get up to page that says that windows install. and when I press install, it throws an error 'no driver device found ". I can't see any HARD disk where to install fresh windows.
I saw a lot of solutions such as if we were trying on USB 3.0 etc, but nothing helped. Please help me.
Hello:
On the PC with the Intel Skylake chipset like yours, there is no support USB2 and the W7 installation media has no the USB3 support, so you are between a rock and a hard place.
The solution that works for most is to use the tool below to integrate the drivers USB 3 of your installation drive of W7 USB flash media.
There are instructions in the readme on the link below to learn how to use the tool. It should be run on a PC with W8.1 or W10.
https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility
-
a problem occurs when windows tried error active code oXC004E003
Please help me and give me a genune of window 7 ultimate 32 bit activation key
Activation error: 0XC004E003 http://support.microsoft.com/kb/938450
Have you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Original title: problem accessing Windows update.
I just reinstalled a pre - SP3 of XP version. When I tried to download the SP3 I got the message: the site has encountered a problem and cannot display the page you are trying to view. I don't know what to do. Help, anyone?
Download the following:
http://www.Microsoft.com/en-US/Download/details.aspx?ID=28 (Service Pack 2)
http://www.Microsoft.com/en-US/Download/details.aspx?ID=24 (Service Pack 3)Ignore warnings about these packages for computer scientists, or only of the
too much network installs and others. These are full Service Packs which can
be installed without an internet connection or when no other SPs are
installed. Install SP2 first, followed by SP3.NOTE: If SP2 is already installed on your computer, or if the SP1a is installed, go straight to the Service Pack 3 package.
-
Original title: Windows I/O device error?
Hi all
I'm Chinmaya and I use Windows 7 Ultimate.
I have this error message.
"Windows 7 error 0x8007045D: the request could not be performed because of an i/o device error."whenever I try to copy songs to my PSP device. In fact, it started when I was copying a 16 GB file from a USB on my computer. One night before everything was fine. But now he's screwed. I tried several times, restore, backup start in safe mode and almost everything that has been mentioned in other responses from Microsoft. Another important thing, I was you know is
Whenever I connect my camera to the computer, my computer is not responding. All possible suggestions... Please help :)
Hello Chinmaya Sharma,
Thanks for choosing Windows and thank you for providing an opportunity to help you.
According to the description provided, looks like you have a problem with the Windows 7 error 0x8007045D error message: the request could not be performed because of an i/o device error
Perform the disk check and check.
Check a drive for errors (Windows 7)
Warning of Chkdsk.
Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.
Answer to us if you are having problems with error e/s or any other issue of Windows, and I'd be happy to help you.
Good day!
Hope this information helps.
-
Windows 8.1 no boot with error 0xc000000f
Yesterday, I was watching a video and my windows suddenly began trolling. After awhile, I got a message saying that windows has problems and that I should raise them in a small window as it does when a program is not responding. After a few minutes, he tried to restart Explorer (btw my wifi did not work for 5 minutes before that). Finally he stopped and when I tried to start it I got the error 0xc000000f. I used my DVD of windows to try to fix them, but he was stuck in repair disk errors for about 6 hours with no result. I stopped and made a hard disk self test. The rapid stopped at 1% and says replace disk 1. The full test don't even have 1%, then said the same thing. Please help me!
Hello
For a better understanding of the question, I would like to know what is the brand and model of the computer?
0xc000000f error indicates that the boot selection failed because a required device is not accessible. This problem may be caused because of damaged files.
As the HDD test failed with the error "Replacement hard drive", I suggest you to contact the manufacturer of the computer and test the hard drive if it does not work properly or not.
Hope this information helps. Reply to the post with the results of the test of hard disk to help you further.
-
* Original title: I can't seem to be able to refresh, reset or reinstall my windows 8
I have a laptop Asus s200e
I would I have tried to reset my windows 8 to the factory settings and the thing is he always tells me that I have missing files and I need the installation disc. That is, that I don't have an installation disc because it is preinstalled and I tried to start up and I got an error 0xc000000f.
Please help me
Hello
Thanks for posting the query on Microsoft Community.
Am sorry to know that you are unable to boot the system, and you get an error: 0xc000000f.
This error can occur if some files are corrupted, or if you have made changes to your computer.
Did you change to your system, the hardware and/or software, before this problem?
You can try to restore the computer configuration by clicking on the link below.
Windows 8-How do I restore the system to the factory default settings, if I can't get into the system?
http://www.ASUS.com/support/FAQ/1008226/Note: If you reset the computer to factory settings, it will remove all applications, programs and drivers that you have installed. If you need to reinstall all applications and programs, once you reboot the system.
If you still have the same problem, you must contact the Asus technical support. Here is the link: http://support.asus.com/ContactUs.aspx?SLanguage=en
I hope this helps. If you still have problems with windows know please let us.
-
Satellite L850: Windows 8 error - 'PC hit a problem... ". »
Hello.
I bought a portable Satellite L850, used it for about 2 hours. Next time I booted up it, the error ""restart your PC on a problem and needs. " We are only collecting information, and then we will restart for you. (0% complete) "in a blue screen appeared.
He gave me two options using the F8 key, has nothing; He blinked only screen when I pressed the F8 key or any other key F for all that matters.
Changing the boot in the bios options, I was able to boot a Windows 7 DVD booteable, and to my surprise, I found that the hard drive had no partitions... at all (when it should be 2 maybe 3 partitions and a space law?).
Of course, I could not also burn the recovery DVDs because I could not go back to windows, and when I tried to boot from an overview of client Windows 8 DVD, the same error occurred, over and over again.
I now use the computer under Windows 7 I have installed, but I would definitely come back the origin of windows 8 copy supplied with the computer... or at least be able to maybe install another copy of Windows 8 of my own.
Somebody help me, I would really appreciate it.
Sorry if my English is not good enough, it isn't my mother tongue.
Hello
I think that you have installed Win 7 on the HARD drive. Right?
This means that Win 8 is no longer available looks like you couldn't create the recovery disk containing 8 win too so I don't see an option for you allow to win 8:
You must order the disk recovery from here:
http://backupmedia.Toshiba.EU/landing.aspxBut a question remains open: why the BSOD appeared?
It could be a problem of system or a hardware problem, but I can't say with certainty what's exactly wrong according to me, you will need to contact a service if the installation of Win 8 can not fix this -
Dear Sir I have toshiba l300 notebook now, I had some problems at the start that a time window is error and posted massage window stopped work go on line chek problem and restart when I restart then run ok that's my question ok
Hello
display the appropriate error message.
the error codes?
Try the clean boot procedure to find the application or program causing the problem.
http://support.Microsoft.com/kb/929135
all the best!
Addison
-
windows update error not ragarding problems. ox80240036
whenever I try to update my window, it displays error no. ox80240036
Hello
You did changes to the computer before the show?
Method 1:
You can run the fix it and check.
The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/
Method 2:
Perform a clean boot and try to update windows and check.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.Method 3:
You can also try the steps in the supplied knowledge base article and check.You can not install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after you install Windows XP SP3 immediately after a clean install, or
http://support.Microsoft.com/kb/943144Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry -
iTunes error update
I am trying to install an update to iTunes on my laptop and find the folowing part-way through the installation error:"There is a problem with this Windows Installer package. A program run as part of the set up did not complete as expected. Contact your provider to support personal or package. »
I got iTunes for 3-4 years now and have always been able to install updates successfully, so don't not sure what is the problem.
I tried msconfig and changed the boot process, so it includes all of the non-Windows elements, as suggested on the Microsoft Web site, but that has not worked.
Can anyone help?
Thank you
The instructions were to contact the vendor of the package. This isn't iTunes, Microsoft.
Ask the question in the Apple Forums:
https://discussions.Apple.com/index.jspa -
I m PARDEEP SEHGAL of INDIA sir, I tried to install the software of PINALCE STUDIO 12 but despite several attempts, the software could not be installed in Windows XP service pack 2 but version to error message repeated as "error 1721.There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package. Action: PCLE_StudioInit, location: C:-... \Studio.exe, command: /init 'could someone help me out here.
Hello
Try the following methods.
Method 1:
Download and install the latest Windows install http://www.microsoft.com/download/en/details.aspx?id=8483
Download WindowsXP-KB942288-v3 - x 86 .exe for Windows XP.
Method 2:
Register Windows Installer service; To do this, you need boot mode safe.
1 restart your computer and press F8 several times before the Windows Logo appears and select Safe Mode and press enter
2 - log on your user account (must be administrator).
3 - Click Start, and then select 'Run' or Win Key + R to open the "Run".
4 - Type cmd and press enter
5 - in prompt type command sequence,
msiexec /Unregister and press enter
msiexec/regserver and press enter
Close cmd and boot as usual and check the installation.
Method 3: Run System File Checker
1-click Start > all programs > Accessories > right click on cmd, select 'Run as administrator'
2 type the following commands
sfc /purgecache and press enter and you may be prompted to insert your Windows XP CD-ROM. CD Once completed, you will receive this message Windows File Protection has managed change.
After this, type this sfc/scannow and press enter and you may be prompted to insert you CD Windows XP CD. This can take some time to check.
I hope this helps.
-
If I press f1 it will then boot to windows, but I need to cure the problem with the disk error message
Hello petertomblin,
It seems that this message is coming because of settings in the BIOS.
The computer has a floppy drive?
If so, is it operational?
Nevertheless, we want to get into the BIOS and disable the startup procedure floppy drive,
It is this best with support of the manufacturer of your.
PLEASE NOTE:
BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
Best regards
Matthew_Ha
Maybe you are looking for
-
My url bar doesn't work at all since the last update to 39.0
I deleted all the Add-ons, updated Firefox 2 or 3 times. Tried to use it in safe mode. Nothing seems to solve the problem.Can someone help me please?
-
error when deleting the history of Shockwave
Whenever I try to delete my history or cookies, I get error message saying: Shockwave Player error To view the movie, open your browser in the 32 - but mode. (1) in Safari, select Safari/Applications in the Finder, click on more information(2) make s
-
low audio on my computer hp laptop pavilion g4-1201tx
I use hp pavilion g4-1201tx, window 7 ultimate 64 bit. My speakers produced his least when I play videos, this question is for 2 months and day after day sound from my speakers are reducing.
-
Satellite C660 - overheating and decommissioning
I have a computer laptop satellite C660 and in recent weeks it has been overheating and switching of. The fan and the heat sink is free of dirt and I bought and installed a new processor, but the problem persists. Actually the only way I can get the
-
I have a problem with my HP G5415 Windows 7 desktop PC. The cards AMD Radeon HD 6450 shows invalid code PURU1G-000000-X87R4KAOJ403. It causes failing departures from the PC with as consequence a blue screen. I quarantined some software that I use rar