Problem connecting wireless NB200 - 10G

Similar Questions

• Problem connecting wireless with my Tecra A8

  Hello

  I have problem connecting WiFi with my laptop Tecra A8. When I opened my laptop, it does not connect to the wireless network.
  I tried several ways to solve this problem.
  I updated for active connections, then I click on the Connect button after you select my wireless LAN, but it doesn't connect.
  Or I restart my computer, but it doesn't connect.
  However, it connects to the network wireless in anytime after about 15 minutes.

  Also when I tried to connect to the network wireless at home, but I couldn't t connect. I removed the password for the connection. Then I connected without any problem.
  I wonder that there is no problem with installation? Or my wireless card doesn't work?
  Can someone help me?

  Thank you

  > Also when I tried to connect to a home wireless network, but I couldn't t connect. I removed the password for the connection. Then I connected without any problem.

  According to the statement, all looks like that you try to use a password for encryption wrong!

• Problem connecting wirelessly with Windows XP

  I broke out an old computer and was about 6 years old, updates to do. now that those who are in fact, can't the Wi - Fi to connect to save my life. I messed around online looking for a solution and have yet to find one. It seems that my problem has to with Windows wireless zero configuration.

  When I try to run the command sc query wzcscv I get this response:

  enumqueryservicesstatus:OpenService [sc] failed 1060:

  the specified service does not exist as an installed service.

  Any ideas?

  Assuming that you have spelled correctly when you ran the SC Query command (wzcsVC no wzcsCV), see http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking/wireless-zero-configuration-service-not-installed/5d798c92-58db-4567-94c4-7c5c0a16becd

• Problems connecting wirelessly with Windows XP

  Original title: microsoft.com/wzc service/article 871122
  We had to reprogram our computer wireless caused by a virus.  Now, we can't get a wireless connection from our desktop to our wireless computer.  We have a low signal 4 but it says it is trying to acquire the network address.  What is the procedure to try?  Thank you.

  Hello

  Try the methods provided below and check if that helps.

  Method 1:

  You can check the link below to troubleshoot issues with the network wireless in Windows XP.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  Method 2:

  Also, you try to run Microsoft Safety Scanner and check if the problem is caused by a Virus/Malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Problem connecting Wireless Windows 7 - No. available wireless connections

  I have the same problems...

  I have just purchase a HP with Windows 7 Desktop on her calculation

  27/11/2010.  Get a router Netgear wireless... use Clearwire for internet services.   I have so many questions, being able to connect on wifi... with all my other electronic devices cell... phone, laptop?

  Old computer is running Windows Xp... never had any problems... now... couple months... keep having in that regard... Yes... when it starts in mode 'sleep'...

  I have to reset the router then couple of days later... same thing again... .iPhones do not work, laptops don't work... never had this problem before?

  Help! Please... I'm not a computer expert to be... but I'm tired of this... Help!

  Hello

  Assuming that the signal is strong, and that there is no noise in the electrical environment.

  Visit the support site of the computer and make sure that you use the latest drivers * for network adapters.

  Check support for the router and make sure that your using the latest firmware for the router.

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  * On drivers update .

  Try installing the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Resolved - problem of wireless connectivity "wlan0 link is down.

  Quick update:

  * If you encounter this message, make sure that you are trying to connect to a wireless "N".

  Yes, he is in small print on the box, right, sony will not ask you this when you are troubleshooting.

  * If you rely on Sony for smart assistance, forgetabout it.

  * After the receiver a comment card and to express my disappointment, the call center outsource sent a letter... and when I called to discuss, they were still clueless.

  Sorry, but the support structure is absolutely catastrophic.

  We now return you to your regular programming...

  ----------------------------------------------------------------

  OK, let's go, in detail:

  My Sony dashboard came again, out of the box today. It will connect to my network.

  FYI: My set of skills: I am an engineer of sales network, with an extensive network of Wi - Fi and running in my house.

  After connecting the dashboard and providing configuration information, the message I get is:
  __________________________________________________

  Network configuration
  Failed network connection...

  wlan0 link is down
  did not get an IP address
  Internet is inaccessible
  __________________________________________________

  Like others on this forum, it seems that my dashboard won't "handshake" with my wireless router.

  To try to solve problems, I did the following:

  (Slot 0): both my wireless router and my attempt to connect to the sony dashboard are in my home office, so the intensity of the signal should not be a problem.

  (1) check the connectivity wireless on a multitude of home devices: laptop, TV, iPhone, ipad... in short: Wireless works. Both with fixed IP and distributed DHCP address.

  (2) restart my Rosewill RNX - N4, wireless "N".

  (3) allow my SSID be visible (that I found which helped my LG TV to connect during its initial configuration)

  (4) checked my WLAN settings on my router:

  SSID: *.
  Security mode: WPA2 only: personal
  Type of encryption: AES
  Pre-shared Key: v * m

  (5) restarted the dashboard of Sony.

  (6) wireless seems to work on the sony dash, as the configuration screen of the network about dashboard States:
  ______________________________________________

  Network configuration
  Choose a wireless connection

  ..:| (my ssid is displayed)

  MAC address: (my MAC address of my wireless router is displayed)
  ______________________________________________

  (7) I select my SSID (FYI: nobody else displayed) and click (next)

  (8) place comes the next screen:
  ______________________________________________
  Network configuration
  Choose the key to coding (WPA2-PSK)

  HEX)
  (o) ASCII
  ______________________________________________

  I select ASCII then (Next)

  (9) he asked my key, I carefully enter (.. .slightly annoyed that the screen will not edge to allow me to see all the characters that I'm going home)..., then click on (Next)

  (10) I choose Auto IP, as during the initial setup I keep it as simple as possible... and then hit (Next)

  (11) to the top displays the following screen:
  ______________________________________________
  Network configuration
  Confirm settings

  name: (my SSID) (My MAC Address)
  AUTH: WPA2PSK encryption: AES
  key: (poster in my correct key, read and validated twice)
  automatic IP allocation (DHCP)
  _____________________________________________

  Completely satisfied with it, I select (Next)

  (12) the sony dashboard begins its Network Configuration / connection looking for the network and then...

  (13) the following:
  __________________________________________________

  Network configuration
  Failed network connection...

  wlan0 link is down
  did not get an IP address
  Internet is inaccessible
  __________________________________________________

  (14) in an attempt to solve the problems, I also tried to set up with a static IP address:

  static IP address:
  IP: 192.168.15.20
  Subnet mask: 255.255.255.0
  Gateway: 192.168.15.1
  DNS1: 192.168.15.1
  DNS2: 8.8.8.8

  ... and the results were the same: "wlan0 link is down.

  (15) as a final step, I reset my wireless router to have no. SECURITY at ALL. Guess what? "wlan0 link is down.

  At this point, I'm at a loss for what I could do "evil".

  I welcome comments from other users, either to continue to solve the problem or sharing what you did to resolve your issue with connectivity.

  Thank you.

  c.

  Well, here I am, a moth and a half later.

  After speaking to Sony technical support...

  After sending the camera back to Sony...

  After having been informed by Sony that this point had problems, they need to replace parts, AND they were going to send me a new device to save time...

  I get a new, and it has exactly the same features / problem.

  So I try another router, same problem.

  Guess why?

  Because I have my network running "N" and it's a Sony wireless B/G device.

  Anyone who has mentioned in technical support... The point on the replacement due to damaged items was total BS.

  If you have a network of "N", it will recognize your SSID and even to recognize the security there.

  But it does not connect.

  Once I changed to a mixed G/N wireless environment, it connects.

  For example, you might say my own question... should have known.

  However, Sony sells a device "B/G" when almost everything comes standard "N"...

  Not cool, Sony... Not cool.

• HP Officejet Pro 8620: HP Officejet Pro 8620 - problem with wireless connection w/computer

  Hi all

  I recently bought the HP Officejet Pro 8620 and I have problems connecting with my computer.

  I used the Setup Wizard to connect the printer to the wireless network of my University, and when it's over, the blue light of connectivity remains a solid blue and the screen says it is connected, which is great. However, when I use the HP Officejet Pro 8620/software of connection instillation, I always get the message,

  "-L' the entered IP address is either incorrect, or it is another wireless network that has the same name as your network." Please ensure that your printer has this IP or enter the correct address below and click on search. Also, confirm that you wireless network is unique. »

  I did somehow on the printer IP address is copied 100% exactly the same with the points and the message still appears and my printer is unable to connect with my computer. As another option, it says that I can use the host name to find the printer as well. However, the same thing happens. I'll type in the name of host by number and letter by letter, and again, it does not find my printer. In addition, there is only 1 network name so I know I hit the right one. Being a student, it is very important that I get things printed off the coast, it is essential for me to solve this problem. Also, I spent a lot of money on it so I need to work properly.

  It should be easy to communicate that it gives me all the necessary information right in front of me, but as I said, it was not easy or fun experience. I don't really know how IP work addresses but I tried to use all the only thing that I can find that is relevant. From now on, I have to record everything in PDF format on my computer, send me unwanted, printing documents download them on my Galaxy Note 4, connect my phone to the printer using the wireless HP Direct on the Officejet and then finally I can print my things. Yes, it works like this, but it is also a concern and I shouldn't do that. I realize that I can't buy a USB link cable to connect my printer to my computer but I don't want to ride the 2 every time I want to print.

  (Also something to note, since I'm on WiFi from the University, I don't have access to the router of course so I don't know if this is a contributing factor in why things do not work).

  If anyone has suggestions/advice/answers on the issue, please let me know. Thank you!

  Hello @Plz_Help.

  Welcome to the Forums of HP's Support. I understand that you have a problem connecting to your computer and your printer via Wifi from the University. I would like to help.

  The only thing that really POPs, is that you use the network of universities. This can cause a lot of problems.

  Question: When you connect your computer or Note 4 on the network, should a pop-up saying you accept the terms of service? If so, this would prevent an air of challenge the printer properly connected to the network.

  If you had access to the router I would recommend checking the network connection by typing the printers IP address in a web browser. If you can access the printers webserver shipped, then, the connection is fine. If you can't you need to reset the router. Of course, you can do this.

  Also, here's something to consider: If the printer successfully on the network, everyone else on the network will have access to your printer.

  A USB connection will be the most reliable and safe way to go. Another thing, why send your rating 4 print jobs? Why not save the PDF files and connect the computer to the wireless network direct printers? In this way, you can print from your computer.

  Sorry I can't give you a solution ' to do this and it will work. You must convince the universities IT department to get things related.

• problems with wireless connection.i have hp Pavilion dv6700

  I have a hp pavillion laptop with windows vista home premium dv6707. the wireless program is antheros. my router is netgear wnr1000. I don't have internet connection when the ethernet cable is PLUGGED. When I try to connect without cable. I turn on the wireless button. This one is blue (on) and orange (off). nothings so bad at this. made wireless signal discover my internet at home and connect to the router, but here's the problem, IT WONT CONNECT FROM THE ROUTER to the INTERNET. the network and sharing card see the computer that connects with a green line to the network not identified. BUT THEN A RED (X) IN THE NETWORK IN THE WORLD OF THE INTERNET. I click on the (x) to solve the problem, but it is not always correct it. tried to reset the router, address. even tried to disconnect the computer power and the router for 30 minutes. SO WHAT'S THE PROBLEM IN MY COMPUTER? all my drivers/programs/and windows are updated...

  I KNOW THAT THE WIRELESS WORKS WELL BECAUSE WE HAVE AN ANOTHER HP LAPTOP THAT HAS NO PROBLEM CONNECTING TO THE SAME ROUTER.

  Hello:

  I recommend that you check your version of the driver for your Atheros wireless network adapter.

  This is the latest version of HP: 9.20 (March 4, 2011)

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=472276&swItem=ob-91782-1&mode=4&IDX=1

  If all goes well, that will solve connection problems, that you face.

  Paul

• at & t u-verse, & having problems connecting my Officejet 4500 to my current wireless network

  Hello

  I just got an Officejet 4500, and I am unable to connect it to my current wireless network.  I'm AT & T U-Verse so I use 2Wire equipment.  I have a Mac Book Pro, and I'm on Mac OS X operating system 10.5.8.  When I try to connect, I get an error message saying something like "Failed to connect."

  In the past, I had problems connecting my Airport Express to 2Wire.  In order to make it work, I connected the router 2Wire and changed the WPA - PSK (TKIP) security settings and WPA2 - PSK (AES) to just WPA2 - PSK (AES).  My Airport Express was able to connect without any problems.

  Please help me to connect my Officejet 4500 to my 2Wire router.  I note also that I'm not really tech savvy so I need instructions are written in simple terms.

  Thank you in advance for your help!

  Marc-Antoine

  Tanisha Hey! Try as part of this support document: AT & T 2Wire routers: "Login failed" or "Can't find printer" Message, or cannot connect to a wireless network

  I hope this will get back you on track!

  -Sean

• HP OfficeJet 6500 E710n: HP OfficeJet 6500 printer problem - connection to new Comcast Wireless Gateway E710n

  Use this printer (wireless) for a few years without problem connected to a Linksys 802.11n wireless router.  Connected to a desktop computer and two laptops.

  Comcast asked recently that I update my modem cable to a new wireless, which also serves as a 802.11n access point wireless router.  I installed the new point wireless very well and has been able to set up the printer on a wireless network. (IP, host name and Mac address doesn't appear on the thin printer).

  I reinstalled the printer drivers on each computer and everything worked very well last weekend.  This weekend, I went to turn the Scanner on the desktop (HP Pavilion, Windows 7, 64-bit) and it wouldn't work.  Then I reinstalled the device drivers and then there was no connection to the printer (many reboots the PC and printer at various times during the tests).  So I ran again the connection settings on the printer - and led wireless term.  (I was able to get the scan to the connection to the computer once on one of the laptops, never the office, then lost.  When I send to the printer, it goes into the queue, a very small number of bytes, cross (usually hear the printer starts) then there lost error "connection to a printer.  Oddly enough, a couple of times after canceling the print job in the queue, the printed test page actually printed a few minutes later...

  I tried to use HP Print & Scan Doctor - it was a complete waste of time.  To date, it has always died (do not connect not not the unit) and never been able to diagnose something.  I end up having to go to the Task Manager to kill him because he always hangs.

  Any thoughts?  I'm puzzled.

  Appreciate any help/ideas that someone can think.

  FYI - I have still no idea what the question is / was?

  Connected to the gateway wireless from Comcast to the old Linksys router and I went back to my old wireless network.  After you have reinstalled the printer drivers, re-connection of the printer to the old wireless network, re-start the printer and computers - I was (finally...) manages to get printing and scanning works again.

  What a waste of a morning/afternoon.

• Problem with wireless - Vista Network and Sharing Center does not recognize my connection!

  I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.

  Hello

  Method 1:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  You can also view the related items for more information.
  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Method 3:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  See also:

  Connect to a network with Windows Vista wireless

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

• J4680 problem of wireless connections

  I recently bought the printer and trying to connect to my wireless network.  I followed the instructions to the letter (twice), without success.  I spent a few hours trying to solve the problems.  A few relevant details:

  1. with the help of VISA Home Premium on computer laptop installation

  2. use FIOS router wireless

  3. I tried to many physical locations of the printer (including next to the router) - the wireless network Test report states:

  No filtering - FAILED

  The signal - VERY LOW

  4. I tried to NETWORK WIZARD to set the WEP and SSID (he still believes only he)

  5. I cut/pasted my page to config the router WEP key

  6. I tried to manually enter an unused IP address subnet mask and gateway

  7. I have disabled the firewall on my laptop with no change in results

  8. I have confirmed the filtering MAC is NOT enabled.

  9. I have three wireless devices throughout my home connected without any problem.

  It almost seems as if there is a flaw with the adapter on the printer wireless.  How the power of the signal to be VERY LOW when the printer is 2 feet away from the router.  When the Network Wizard starts, it locates all the networks without wire around me (which is odd).  I spent reviewing the help articles in support of HP and messages in this forum.

  Any help would be most appreciated.

  Thanks in advance.

  There are a few things to check here.

  First, let's define an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). I think that your router is 192.168.1.2 a.51 as its range.  Choose 192.168.1.100
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the gateway and DNS white. Click on 'Apply' - this part is important!  The page will not respond.  Wait a few seconds, then enter the new IP of the printer to see if it responds to the new IP address.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

  Finally, WEP is not secure and can cause problems with wireless connectivity.  It can be broken with freeware in 10 minutes approximately.  Please turn on your router to use WPA with a password strong character 13 +.

• Unable to connect to Wi - Fi network - 'problem with wireless adapter or access point '.

  When I try to connect to the network Wi - Fi Home I get error like:- Windows cannot connect.

  When I click on solve problems I see error below :-'problem with wireless adapter or access point '.

  We reinstalled OS

  We rested the router

  We are able to connect to Wi - Fi in other laptops, notebook and mobile

  We have updated all the drivers of network also.

  Please help me solve the problem.

  Hi Niranjan,

  Thank you for your support. In fact, the problem is with the Router Configuration, because with any other router device, we are able to connect to Wi - Fi in the laptop.

  Thank you

• Problems with wireless connection in Windows

  I've already updated my adapter wireless windows 7, but every time I have to leave the room where I placed my router... the connection is lost. may there is a problem with wireless my laptop range... Please help me I don't know much about this kind of things computer b. Please send me a direct link so that I can solve the problem
  OT: Network network adapter Ethernet NIC wireless networking device

  Hello

  Internet connection issues are more often caused by disconnected cables or by routers or modems that do not work correctly. I suggest you try the steps from the following link:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-in/Windows7/why-can-t-i-connect-to-the-Internet

• How to solve the problem of wireless connectivity

  I tried to use the wireless internet connection, but the network signal showing me a full signal with the operating state. I also tried to use the troubleshooting connection, but for me there is no problem stating. But still, I can't access internet, the status of browser simply open and display a "pending to connect. I went to cmd and it is what tells me

  "Microsoft Windows [Version 6.1.7600]."
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Users\User>ipconfig/all

  Windows IP configuration

  Name of the host...: Benjamin
  Primary Dns suffix...:
  Node... type: mixed
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 3 Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... : BE-B7-0D-28-4D-10
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Wireless Network Connection 2 wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Ada Atheros AR9002WB-1NG wireless network
  pter #2
  Physical address.... : 9C-B7-0D-28-4D-10
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv4 address: 192.168.1.169 (Preferred)
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.
  DNS servers...: 213.55.96.166
  213.55.96.148
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek PCIe FE Family Controller
  Physical address.... : DC-0E-A1-3D-3C-D1
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {EF78D66C-9571-412A-B8AB-7D37EB0F2330}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card adapt 6TO4 tunnel:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:9 d 38:953 c: 20 c 4: 3faf:3f57:fe56 (Pref
  made a mistake)
  Address IPv6 local link...: fe80::20c4:3faf:3f57:fe56% 18 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  "C:\Users\user >.
  Can someone help me in this problem. Thanks in advance for your kind and favorable response

  Hi Bini,

  Thanks for posting in the Microsoft Community.

  I understand that you are facing problem with wireless internet connection in Windows 7.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  Please follow the steps in the link.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1