problem cs3

Similar Questions

• Problem CS3 make believe

  We have been struggling with a strange problem here at my work for several weeks now and can't seem to find the answer anywhere.

  About 6 weeks ago After Effects CS3 (on our Mac) all of a sudden stopped rendering opinion correctly. He will actually make the file and it takes about as long as expected (the file size will be about the size expected as well), but when you try to play the AVI rendering, he plays about 6 seconds (that should be a 1 or 2 minute AVI) and that's it! The scrubber will travel all the way to the end of the timeline on the player, as if the file is only 6 seconds of time even if the file size is appropriate for a much larger file.

  Here IT guys have reset defaults on after effects, re-installed After Effects, permissions repaired on the Mac, re-installed on Mac OS X and the last thing they tried was re - install quicktime (because AE uses Quicktime for so many tasks rendering engine). Strangely enough, re - install Quicktime solved the problem for about 3 makes.

  The Mac is our primary visit station here and we had to resort to make Targa sequences, transfer them to a PC and making it in AVI format from there. The additional steps are really starting to be a bottleneck in our pipeline, so if anyone can offer any help with this, I would really appreciate it!

  Return it is currently exported to an uncompressed AVI file (since you cannot render in AVI format of the queue of rendering on a Mac) in After Effects CS3.

  Are the specifications on our Mac: Power Mac OS x 10.4.11 (Tiger), dual processors Intel Xeon 3 GHz and 4 GB of RAM.

  Thanks in advance for any help.

  Please everyone on all the other forums you posted to a favor and that they do not know when you get a response.

  See 'Advocacy of Mylenium for good sense on the forums'.

• Text find and change the problem CS3 and CS4 scripts

  I use the script below to find text and turn them into others.

  There is one thing the script can't do it for me.

  Example:

  
  (g) management

  (1) that no law that is adopted in the Cayman Islands, a tax to collect profits, income, gains or satisfaction does apply to the company or its activities; and

  (2) that the above-mentioned tax or any tax in the form of rights of succession or inheritance tax is payable in respect of shares, debentures or other obligations of the company.

  Example: (end)

  I had a lot of subjects or points in the passage. And I want to change the space between '(g)' and 'Management' in a tab character. So I revised the plain text file 1texte.

  PS: 1text.txt is filled with what to change.

  text {findWhat: "^ p(^?)" ' "} {changeTo: "^ p(^?)"} ^ t "} {includeMasterPages:true, includeHiddenLayers:true, includeFootnotes:true, wholeWord:false} search all space-dash-space and replace it with an en dash."

  The result is:

  (^?) ^ tManagement

  (^?) ^ tthat any law that is passed in the Cayman Islands, imposing a tax on profits, income, not capital gains or satisfaction applies to the company or its activities. and

  (^?) ^ tthat the above-mentioned tax or any tax in the form of rights of succession or inheritance tax is payable in respect of shares, debentures or other obligations of the company.

  PS: ^ t is a tab character.

  result (END)

  This is not what I want.

  It should be"(g) ^ tManagement'.

  PS: ^ t is a tab character.

  Please someboady help me out revised the script below to change the text in what I want. Thank you very much.

  Here's the script.

  FindChangeByList.jsx
  An InDesign CS4 JavaScript
  /*
  @@BUILDINFO @ "FindChangeByList.jsx" 2.0.0.0 January 10, 2008
  */
  Loads a series of strings delimited by tab characters from a text file, and then executes a series
  Find/replace operations based on the lines read from the file.
  //
  The data file is delimited by tabs, returns to cart that separates records.
  //
  The format of each record in the file is:
  findType < tab > findProperties < tab > changeProperties < tab > findChangeOptions < tab > description
  //
  Where:
  < tab > is a tab character
  findType is 'text', 'grep' or 'glyph' (this sets the find/replace operation type to use).
  findProperties is a recording of properties (text) search preferences.
  changeProperties is a recording of properties (text) of the change preferences.
  findChangeOptions is a recording of properties (text) of the options find/replace.
  Description is a description of the search/replace operation
  //
  Very simple example:
  text {findWhat: "-"} {changeTo: "^ _"} {includeMasterPages:true, includeHiddenLayers:true, includeFootnotes:true, wholeWord:false} find all double hyphens and replace by an em dash.
  //
  More complex example:
  text {findWhat: ' ^ 9 ^ 9.} {' ^ 9 ^ 9 '} {appliedCharacterStyle: 'price'} {include notes: true, include master pages: true include hidden layers: true, any word: false} find $ 10.00 to $ 99.99 and apply the character style 'price '.
  //
  All metacharacters search InDesign are allowed in the properties 'findWhat' and 'changeTo"findTextPreferences and changeTextPreferences.
  //
  If you enter the backslashes in the object findGrepPreferences findWhat property, they must be "escaped".
  as shown in the example below:
  //
  {"findWhat: '"\\s+ "}
  //
  To learn more about InDesign scripting, go to http://www.adobe.com/products/indesign/scripting/index.html
  or visit the InDesign Scripting user to http://www.adobeforums.com users forum
  //
  main();
  main() {} function
  var myObject;
  Ensure that the interaction of the user (dialog boxes display, etc.) is turned on.
  app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
  If (app.documents.length > 0) {}
  If (app.selection.length > 0) {}
  {Switch(App.Selection[0].constructor.) Name)}
  case 'PointInsertion ':
  'character ': case
  case "word":
  case 'TextStyleRange ':
  case "line":
  stops of the "Point":
  case "TextColumn":
  case 'text ':
  case "cell":
  case "column":
  case 'Row ':
  case 'Table ':
  myDisplayDialog();
  break;
  by default:
  An option has been selected, but it was not a text object, so look for in the document.
  myFindChangeByList (app.documents.item (0));
  }
  }
  else {}
  Nothing has been selected, then just search for the document.
  myFindChangeByList (app.documents.item (0));
  }
  }
  else {}
  Alert ("no document is open. Please open a document and try again. ») ;
  }
  }
  function myDisplayDialog() {}
  var myObject;
  var myDialog = app.dialogs.add({name:"FindChangeByList"});)
  {with (MyDialog.dialogColumns.Add ())}
  {with (dialogRows.Add ())}
  {with (dialogColumns.Add ())}
  staticTexts.add ({staticLabel: "beach of research :"});})
  }
  var myRangeButtons = radiobuttonGroups.add ();
  {with (myRangeButtons)}
  radiobuttonControls.add ({staticLabel: "Document", checkedState:true});})
  radiobuttonControls.add ({staticLabel: "Selected Story"});
  If (app.selection [0] .silence! = "") {}
  radiobuttonControls.add ({staticLabel: "Sélection", checkedState:true});})
  }
  }
  }
  }
  Ditto var = myDialog.show ();
  if(myResult == true) {}
  {Switch (myRangeButtons.selectedButton)}
  case 0:
  myObject = app.documents.item (0);
  break;
  case 1:
  myObject = app.selection [0] .parentStory;
  break;
  case 2:
  myObject = app.selection [0];
  break;
  }
  myDialog.destroy ();
  myFindChangeByList (myObject);
  }
  else {}
  myDialog.destroy ();
  }
  }
  function myFindChangeByList (myObject) {}
  var myScriptFileName, myFindChangeFile, myFindChangeFileName, myScriptFile, ditto;
  var myFindChangeArray, myFindPreferences, myChangePreferences, myFindLimit, monarticle;
  var myStartCharacter, myEndCharacter;
  var myFindChangeFile = myFindFile("/FindChangeSupport/1test.txt")
  If (myFindChangeFile! = null) {}
  myFindChangeFile = File (myFindChangeFile);
  Ditto var = myFindChangeFile.open ("r", not defined, undefined);
  if(myResult == true) {}
  Loop in find/replace operations.
  {}
  myLine = myFindChangeFile.readln ();
  Ignore blank lines and comment lines.
  If ((myLine.Substring (0.4) == "Text") |) (myLine.substring (0.4) == "grep"). (myLine.substring (0, 5) is "glyph")) {
  myFindChangeArray = myLine.split ("\t");
  The first field in the line is the findType chain.
  myFindType = myFindChangeArray [0];
  The second field in the line is the FindPreferences channel.
  myFindPreferences = myFindChangeArray [1];
  The second field in the line is the ChangePreferences channel.
  myChangePreferences = myFindChangeArray [2];
  The fourth field is the range - used only text find/replace.
  myFindChangeOptions = myFindChangeArray [3];
  {Switch (myFindType)}
  case 'text ':
  myFindText (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions);
  break;
  case "grep":
  myFindGrep (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions);
  break;
  case 'glyph ':
  myFindGlyph (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions);
  break;
  }
  }
  } while(myFindChangeFile.eof == false);
  myFindChangeFile.close ();
  }
  }
  }
  function myFindText (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions) {}
  Reset the preferences of find/replace before each search.
  app.changeTextPreferences = NothingEnum.nothing;
  app.findTextPreferences = NothingEnum.nothing;
  var myString = "app.findTextPreferences.properties =" + myFindPreferences + «;"»»» » ;
  myString += "app.changeTextPreferences.properties =" + myChangePreferences + ";". " » ;
  myString += "app.findChangeTextOptions.properties =" + myFindChangeOptions + ";". " » ;
  app.doScript (myString, ScriptLanguage.javascript);
  myFoundItems = myObject.changeText ();
  Reset the find/change preferences after each search.
  app.changeTextPreferences = NothingEnum.nothing;
  app.findTextPreferences = NothingEnum.nothing;
  }
  function myFindGrep (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions) {}
  Reset the find/change grep preferences before each search.
  app.changeGrepPreferences = NothingEnum.nothing;
  app.findGrepPreferences = NothingEnum.nothing;
  var myString = "app.findGrepPreferences.properties =" + myFindPreferences + «;"»»» » ;
  myString += "app.changeGrepPreferences.properties =" + myChangePreferences + ";". " » ;
  myString += "app.findChangeGrepOptions.properties =" + myFindChangeOptions + ";". " » ;
  app.doScript (myString, ScriptLanguage.javascript);
  var myFoundItems = myObject.changeGrep ();
  Reset grep find/change preferences after each search.
  app.changeGrepPreferences = NothingEnum.nothing;
  app.findGrepPreferences = NothingEnum.nothing;
  }
  function myFindGlyph (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions) {}
  Reset the preferences of glyph in find/replace before each search.
  app.changeGlyphPreferences = NothingEnum.nothing;
  app.findGlyphPreferences = NothingEnum.nothing;
  var myString = "app.findGlyphPreferences.properties =" + myFindPreferences + «;"»»» » ;
  myString += "app.changeGlyphPreferences.properties =" + myChangePreferences + ";". " » ;
  myString += "app.findChangeGlyphOptions.properties =" + myFindChangeOptions + ";". " » ;
  app.doScript (myString, ScriptLanguage.javascript);
  var myFoundItems = myObject.changeGlyph ();
  Reset glyph in find/change preferences after each search.
  app.changeGlyphPreferences = NothingEnum.nothing;
  app.findGlyphPreferences = NothingEnum.nothing;
  }
  function myFindFile (myFilePath) {}
  var myScriptFile = myGetScriptPath();
  var myScriptFile = File (myScriptFile);
  var myScriptFolder = myScriptFile.path;
  CheminMonFichier = myScriptFolder + CheminMonFichier;
  If (queue (CheminMonFichier) .exists == false) {}
  Display a dialog box.
  CheminMonFichier is File.openDialog ("choose the file containing your list find/replace");.
  }
  Return CheminMonFichier;
  }
  function myGetScriptPath() {}
  try {}
  myFile = app.activeScript;
  }
  {catch (MyError)}
  myFile = myError.fileName;
  }
  return myFile;
  }

  I'm not a writer, but I'll take a stab and try to make a difference here.

  The main problem, in my opinion, is that you use a plain text instead of GREP search. Text gross has no provision to replace the text found by itself, for example, rather than using the codes you entered a literal string. Your search text of ' ^ p(^?) ' means find any character in brackets that occurs after a paragraph break. I would use in GREP ^ \s+ (\(.+?\)) which translates to find an opening parenthesis at the beginning of a paragraph (so he'll find if it happens to be the first character in th in a story) followed by a number any characters up to the first parenthesis (in the case where you have double the figures or double entries letter) followed by ANY white space (in the case where it is not an ordinary space or multiple spaces). Replace $1\t which means the text found in the first set of parentheses in query search followed by a tab.

  Parentheses are special in GREP, they surround groups of terms you want to re-use the text found, so looking for the actual characters you need to 'escape' with the-prefix, so \(.+\) will find a paren open followed by all the characters up to the end last paren in the paragraph. Addition of the? After the + makes research stop at the first closing paren met, although there are several sets in the paragraph.

• White output

  I am using Flash CS3, and although I am totally new to Flash, I used Adobe for years. That said, Flash is like rocket science, however I have the following problem:
  
  CS3 Video Encoder to create a file .flv from a file .avi or .mpg, that apparently encodes and saves the file. When I try to read the file, or work with it in Flash CS3 Pro, I get a blank white screen. In Flash Player, the choices in the control menu show 'play' ticked, but that and all the other choices are grey.
  
  The files show that they have content (or at least are about 1 MB in size), but don't play don't not anything other than a white screen.
  
  I'm sure I'm wrong, but am discussed if I can see what it is. Looked at the tutorials, and I certainly have coded them the recommended way (not all that hard to add a file and start the queue). The .avi files have content that I can read on Nero and they are fine.
  
  Any suggestions?

  Do you plan that has never flown fighters... I remember that my IP in the undergraduate training pilot was a poster that said, "if they can teach a monkey to fly a rocket, I can teach you to fly this plane." Is not rocket science, not even close.

  That said, the problem is the file .avi I used was not quite in height, slightly corrupt. I found that mpg files seem to work better than avi, or so it seems. In any case, I got what I wanted, which is to put a video of my daughter on my web site for my family.

  Thanks for the interest.

• I'm having a problem when I upgraded to Windows 7 with my programs Adobe CS3 showing Type1 fonts. I have .pfb files both .pfm in Windows fonts folder. Works with MS Word and Notepad.

  Type1fonts will not be displayed in Adovè CS3 programs.

  * Photoshop, Illustrator, and Indesign are the main programs I have problems with.
  * Just upgraded to Windows 7
  * Having .pfm file types as required for Type1 fonts .pfb
  * The fonts work in Notepad, MS Word and Aim messenger
  * Fonts common requested; Helvetica and universe

  If no one has understood the problem by themselves that I'll tell you how I could solve the problem. Go to program files (x 86) > common files > adobe > fonts and put all type 1 fonts in this folder and they work.

• Problems installing CS3 on Windows 10

  I got CS3 installed on my PC and decided to upgrade to Windows 10. The update went without problems and my Creative Suite CS worked perfectly for several months until the other day, when I have received a message on my driver's license does not. I tried several solutions suggested for me nothing works and finally decided to uninstall applications and reinstall them. The relocation went well until the end, when the installer said that "some problems" had been raised during the installation. Problems can be summed up that none of the applications had to be installed. I tried again half a dozen to reinstall without success. There was an indication of the problems during the process, nor any explanation of why it was not possible to install. What could be the reason?

  The only other suggestion is to run the CC cleanup tool after uninstalling. This cleans the registry and nothing behind.

  Choose your application named in the list in the CC cleaning tool. Then re-boot your computer and try a new installation.

  Use the cleaning of creative cloud tool to resolve installation problems

• Photoshop CS3 "Unexpected and unrecoverable problem... access privileges.

  Everything worked fine in CS3, and then all of a sudden I got this message from Photoshop: "an unexpected and unrecoverable problem has occurred because you don't have the necessary access privileges. Photoshop will now stop. "All my other CS3 apps (InDesign, Illustrator and Acrobat Pro are very good.)

  Then... I turned off CS3, uninstalled everything with the software install and then hand has removed all files remaining from Adobe in the system and reinstalled. She accepted my serial number and all activated. Had the same message for Photoshop, but other applications are still working fine.

  It's all the same serial number, all came in the same CS 3 package. HELP PLEASE! Thank you!

  Well, I once more answering my own question after a couple of hours in chat with adobe support. So for all those who encounter this problem, here is how we solved. These files must be deleted:

  ~/Library

  Preferences > com.adobe.Photoshop.plist.lockfileold

  com.adobe.Photoshop.plist.lockfileold

  com.adobe.Photoshopold.plist

• Problem upgrade version Adobe Photoshop CS3, to Photoshop CS4.

  Hi, hope someone can help, Adobe does not support older versions of Photoshop apparently...

  I had Adobe PS CS3 installed on my laptop wife.  But his HARD disk was giving problems, so I've migrated the o/s to a new hard drive to SSD.

  Now, I install the software back, I have successfully installed Adobe Photoshop CS3 and recorded it, I then tried to install the upgrade for CS3 DVD:

  Photoshop CS4, but it fails to insert the code. The code for the CS4 update is accepted OK but when it asks for the serial number for Photoshop CS3 already installed and registered, he said that this serial number is not recognized. I can't seem to work around this problem, and it is very annoying. I have received for the two versions and they were bought from reputable companys Unfortunately it was a few years ago, so probably no help now.

  The last time that happened a few years back, I contacted Adobe who talked through the process that required a different number series and another method

  I can not remember now.  I got this DVD upgrade for awhile and it's a shame if we are unable to make use.

  
  

  I use Adobe CC on my desktop doesn't have is no need for that. But my wife likes the older versions of Photoshop.

  appreciate if someone knows how to work around this problem, currently installed upgrading to CS4 trial version to get past the nag screen.
  

  Rgds Ed
  

  Hi Pepperami,

  Please see Help below links:

  Error: "this serial number is not for a product calling it" | Adobe Creative Suite

  Error: "serial number is not valid for this product". Adobe Creative Suite

  The activation and deactivation of Adobe problems

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Let us know if that helps.

• When I open my application on my Macbook pro using bootcamp, the photoshop CS3 opens very low.  How can I solve this problem?

  When I open my application on my Macbook pro using bootcamp, the photoshop CS3 opens very low.  How can I solve this problem?

  Legacy versions do not support the higher resolutions / poster of the retina. Refer to this:

  My UI elements appear tiny. | Error postal codes of Mylenium

  Mylenium

• Disable the Design Premium CS3 on Mac; Even if the computer is offline, the HELP menu &gt; DISABLE does not work [was: FINLAND has a PROBLEM]

  My CS3 Design Premium should be disabled on computer equipped Mac of a serial [personal information deleted - mod].
  My Adobe product license number is: [personal information deleted; never share your serial number in a public forum - mod] is a student permit. HELP NOW!

  THE PROBLEM, it IS the Mac computer does not understand it IS online - thus disabling problem that I can't solve as a client this company to Adobe! Even the menu IS ONLINE computer CS3: HELP > DEACTIVATE does not run as 'IT' (packaging) does not include online

  Hi sine 20wave %,

  Please visit the following link: Adobe to solve the problems of activation and deactivation of the questions

  Disabling can be done manually, in case you try to activate it on a new machine, please try that once again we have set the serial number, and you can uninstall just the 3 CS of the mac computer where it is not get turned off.

  Let's be now if it will help.

  Kind regards

  Sandrine Bani

• Questions: Re-installation of Photoshop CS3, problem: "a license for this product has stopped working".

  My old computer has Photoshop CS3 (and Illustrator CS3) installed.  The old computer is dead. I did a Time Machine backup from another computer of backup", who had both of these installed applications.  (2 installs is allowed).  I have records of origin for both applications.  My new Mac lacks a DVD player.  So, I downloaded two applications from Adobe.  Photoshop: I launched the installer, & Photoshop CS3 is not installed.  Then I installed the Photoshop.  When Photoshop is launched, I got the dialog box: (((a license for this product has stopped working.  You cannot use this product at this time.  You must repair the problem by uninstalling and then reinstalling this product or contact your COMPUTER administrator or Adobe customer support for assistance. ()) Adobe fails to phone support for CS3 products.

  How can I get Photoshop CS3 to work?  (And Illustrator CS3)

  Hello

  Please follow error: "License has stopped working". Mac OS

  Hope that helps!

  Kind regards

  Sheena

• I bought CS3 for mac G4 and when I transferred to my new mac g5, download programs, but I can't use an any of them because that a window opens and says enter serial No. No problem, I have a valid serial number, but when I enter it, a screen comes ups sayi

  I bought CS3 for mac G4 and when I transferred to my new mac g5, download programs, but I can't use an any of them because that a window opens and says enter serial No. No problem, I have a valid serial number, but when I enter it, a screen comes ups saying that the # is not valid. Can someone help me. [deleted]

  [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  Error "serial number is not valid for this product". Creative Suite

  In addition, if you have El Capitan, click on the following link

  See answer #5 in https://forums.adobe.com/thread/1965850 for several solution links

  -the first link that the answer is a possible solution to install problems

• Problems after you have reinstalled creative suite cs3

  I hope you understand me, I have to re - install creative suite cs3 in old macbook cause an adobe message which informs me to identify and reinstall.

  For 2 days, I try to reinstall it, I use the adobecleanup software and remove a large number of files, as explained in the forums adobe, now I installed once the creative suite but now it the registration problem: computer is offline, but the program activation can't see the internet connection, phone registration is closed and don't work and I have no idea what can do. High is important for me to fix this problem in this macbook. Thanks in advance

  Please visit: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• custom CS3 intall... license problem

  tried a new installation of cs2 and it will not activate... I tried installing cs3 and it install it on win 7. Any ideas?

  Hi garyc92676002,

  About CS2, Adobe has disabled the activation for CS2 applications server. Follow the steps in this document: error: "Activation Server unavailable". CS2, Acrobat 7, Audition 3, or download a replacement here: download Acrobat 7 and CS2 products.

  About CS3, as Shipti says, sharing a specific error message or a screenshot will help the community resolve your problem. This can also be useful: error message during installation. CS3.

  I hope this helps.

  Best,

  Del

• Hi I have a problem with my Photoshop CS3.

  Hi I have a problem with my Photoshop CS3. I have the upgrade in my possession... but somehow, while moving my house, I lost my CS2 version. Therefore, I can't find the serial number for the CS3 upgrade, if I don't have the serial number for CS3.

  Can someone help me find a way to find my serial number for my old version?

  I can't afford to buy another Photoshop application, and phone or chat in support of this product.

  Hoping that someone out there in the "forum-sphere" gets my email and can help me.

  Thank you very much.

  With gratitude,

  Jackie

  Hi jackiel

  The serial number of the Adobe product you bought underneath your products registered on the product box or Adobe (Adobe ID)

  Refer to find the serial number of your product Adobe quickly

  Let us know if this helps

  ~ Assani