Problem CS3 make believe

Similar Questions

• I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  Probably there is debris and dust in the decision-making of the lightning.  Serve with compressed gas canned (NEVER orally).  If this doesn't help, try electronic contact cleaner has a q - Tip.  Finally, take it to Apple.

• problem to make a disc bootable external

  Try to do a 16G flash drive bootable. File system is OS X extended. Partition's GUID. Free space is more than 15G. Installation of Mac OS x system failure said that the flash player doesn't have enough space. Don't know what to try next. iMac is on El Cap 10.11.5. Having the same problem with a Macbook also on 10.11.5 El Cap.

  pinetree1066 wrote:

  Try to do a 16G flash drive bootable.

  How are you trying to make it bootable?

  -OS-x-10-11-El-Capitan-Installer-drive.html http://www.Macworld.com/article/2981585/Operating-Systems/How-to-Make-a-bootable

  Try to do a 16G flash drive bootable. File system is OS X extended. Partition's GUID. Free space is more than 15G.

  If you have 15 GB free there's nothing on the disc but certainly not the whole package 1 GB?

• I'm having problems to make one of the 3rd party fitness on my watch applications

  I'm having a lot of trouble getting my watch to load up one of the applications of 3rd party fitness. Apps for example Strava & Wahoo fitness... In particular, two applications have support iwatch announced when download you from the App store. You don't know if there is a problem with my watch or not because I recently bought a wahoo HRM ability that has the Bluetooth, etc & I paired with my phone, but trying to make a pair of Bluetooth with my watch looking for Bluetooth 'of health devices"it captures anything. I tried to obtain the support of Strava thinking it was their app, but I did exactly what they said to do IE désapparier shows, to remove and reinstall app & his continues to do exactly the same thing. Both apps show on my watch, but when I select to load just makes the circle of reflection and then the app is de-energized so it brings back me to the screen of application on my watch. I've updated my privacy settings to let my watch & the apps read each other, but still does not.

  Hello

  If you have not already done so, it can help to upgrade your iPhone and Apple Watch to the latest version of the software.

  • Update the software on your iPhone, iPad or iPod touch - Apple Support iOS
  • Update the software on your Apple Watch - Apple Support

  If not, try the following steps, trying to open the application after each:

  • Place your Apple Watch on its charger with power connected and also connect your iPhone to the power.
  • On your iPhone: open the music application and start playing a song (through your iPhone pregnant is fine).
  • On your iPhone, in the application of the watch, go to: My Watch (tab) > scroll down and tap the name of the application that does not open > turn off the option to show App on Apple Watch > to pause for a few moments > turn on the option.

  If this does not resolve the problem, the other recommended steps is trying to disconnect and rematching of your watch. As you've already tried this, you can ignore this:

  • The app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.
  • Choose to restore the watch (backup restore) when provided the opportunity during the whole. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
  • Cancel the twinning of your iPhone - Apple and Apple Watch Support
  • Set up your Apple Watch - Apple Support

  More information:

  Get help with applications on your Apple Watch - Apple Support

• Problems to make a call

  Hi I am new in Skype yesterday, I set up my Skype and make a calle to my family in Cuba, my home country but when I tal for 1 call of you minute was o worm unspectly and I need to unblock my account. Today, I try to do it again, but the same, I repeat once again all and then when I try to make other calls I can connect.
  Thanks in advance

  Skype calls rely on a stable internet connection. It doesn't require all that much bandwidth, but it requires a near-continuous connection. If your calls are down, the most likely cause is problems of periodic network connection.

  I'm not sure that understand what you mean by "unlock my account." If it is a problem just call dropped, you should be able to retry the call directly without additional measures.

• Satellite A210 - 15K: webcam problem - graphics make it fail

  Hello

  I have a toshiba A210 - 15K, but I seem to have a problem with the integrated webcam for laptops. When I turn it on I can use it without problems all the time, but sometimes after a few hours of no use when I try to use it again it gives me the following message: "chart make fail" and it runs at all.

  In order to make it work again I have to restart the computer, and even if I restart sometimes it does not start.

  Someone knows how to fix this?

  Thank you

  I noticed the same thing on my Satellite P200. After reboot, everything works again. I don't use a webcam so often and it is not so important to me, but you can try to stop (exit) web cam software and start it again.

  Maybe this will help. Can you please send the result? Right now my cam works well and I can't wait to check this option only.

• HP deskjet all-in-one 3632: problems to make eprint to work

  OK, I'm having a problem making the printer to connect to the internet.

  I have a static IP address on my ISP.   I have 1 n600 Router 2 broadcasting networks.  1 5 g and 2 1. 4 g.   I used void net default 192.168.1.1 and 255.255.255.0.   This router I have a win 7 64 home computer hard wired. I also have a hard wired my Office Access point. the access point also broadcast a GIS of different 2.4 g.  all the sig.s wireless use wap2 Protocol and b/g catch up mode. and the names of all different but same network total network, if that makes sense.  OK, I have a total of 4 more also attached computer too either or network win7 32 ultimate win 7 64 and win vista 32. 2 tablets and 3 IH smrt 5.01 lolipop android running.  I have 2 security cams that have a static for IP and port forwarding on them.  everything works fine.  all computers are part of the same private network hmegroup.  I assigned a static ip address for printer dhcp table.  I can print from any device at any time via wifi.  NOW HERE'S THE PROBLEM.  whenever I go to the WEB form, he is saying that its not active all the check boxes and I don't know what a proxy server is but I know that I have not installed on this network so I click No proxy server.  The PRINTER SAYS UNABLE to CONNECT to the INTERNET.  every time that I tried about 20 this weekend.  It says to check the dns, gateway, blah blah blah.  so the DNS are correct and it shows not 192.168.1.1 as the gateway.  He also btw autodetected it correctly.  so when it fails to connect, I click on web print report. I get the page "get the most out of your printer.  and then a white page. and that's all.  at the top of the page to "get the most out of your printer" it says in "BOLD", "your printer is not connected to a network" which is BS do see on every device and every computer wireless or hard-wire. and I open it a new browser window using 192.168.1.143 which is the static ip address for this printer and bam. It opens right.

  When have I forgotten?  can I configure the gateway as the ip of the real gateway side the ISP of my router.   Im a little aggravated because the only reason why I got this printer from walmart that the PHN android already had the makings of plugin hp on them and I don't like HP is cause of all the fluff sofware that comes with them.  I almost had a gun, but they seem fragile and plasticy more than this one does.  so as I said work is expected for printing on the web.  I tried to press the eprint button and it flashes a little and nothing. I pressed it and the 'i' button and nothing ever prints other than the above page.  I have reset to the default values and done everything as configuration 2 x.

  If anyone can help, I would be very happy.

  facorbin

  Hey @Facorbin,

  Welcome to the Forum from HP Support.

  I see that you are unable to activate the webservices in the all-in-one printer HP Deskjet 3632. I want to help you with this. I have some suggestions that might help.

  I recommend you try the following steps:

  • Enter the IP address in a web browser , and press Enter to go directly to this page. This should take you to your built-in Web server (EWS) printer.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.
  • Note that menu above EWS items can vary in overall models of printers. If you do not see the exact topics that I've listed here, the subtopic you should always appear on the Networking tab.

  If this goes through successfully, try to activate the web services () again. If you're still coming up short after this point, I recommend you enable DMZ mode in EWS your router, manually add the IP address of your printer. (Based on the level of detail, I suppose you're a statement you know what that means). After completing this step try to enable Web services one last time. Success?

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem and that you liked this post, feel free to express your thanks by clicking the "Thumbs Up" icon below by clicking on "Accept as Solution" (this will help others find the solution).

  Thanks for posting in the Forum from HP Support.

  Have a great day!

• Someone know if 10.11.3 corrects mail problems or makes it worse?

  As any search for "El Capitan mail problems" reveals, there are myriads of problems with the original "up" grade, which have not been resolved in versions 11.1 and 11.2. Before I go through another update, can we say if ONE of these problems (breaks down, blocking issue, folders and messages being messed up, etc.) have been fixed? Or he got worse?

  I have not seen any of these problems on my Mac. Problems of Mail? If this is not the case, make sure that your backups are up to date and run the software update. Those who can should be on 10.11.3, because older versions of 10.11 have security holes in them that Apple has made known to everyone here: about the security content of OS X El Capitan 10.11.3 and security update 2016-001 - Apple Support

• Problems to make a screenshot

  For awhile, I can't do the screenshots more. Never had a problem with it before.

  When I try to make a screenshot, it looks like it works, but I get an icon on the top left by saying that he could not do so because of lack of memory or settings.

  Lack of memory is really impossible.

  I can't find the solution in the settings...

  Help, because I think it's really useful to be able to make the screenshots!

  Found! Phone does not recognize drop pictures on Sd Card more. Replaced new photo folder and that worked!

• problems to make the internet connection on computer starts

  That's my problem... I turn on my laptop, no internet, I have to click on the Start button go to administrative tools, open services find wirless zero configuration and turn it on. then close all windows. I go to the blue toolbar at the bottom of the screen and then click the only Wi - Fi computer, open it, find the check box "use windows to configure the network settings" click this box close this window. Then, I have internet. Anyone know what is happening?

  Hi jmsmom2007,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. have you anythird party network or Wireless Manager software installed on the computer?

  If you have any third-party network or Manager software installed on the computer wireless, I would say that you uninstall and check if the problem persists.

  If you don't have such software installed then I would suggest that you perform the clean boot procedure and check if it works.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Also, make sure that the wireless zero configuration service is enabled when you follow the steps in the clean boot procedure.

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems to make my first application work

  Hello, I am new in the development of blackberry applications, but not new in development (C++, C, c#, JAVA).

  I am facing some problems with my first development for the blackberry in JAVA platform.

  MyScreen code:

  public final class MyScreen extends MainScreen
  {
  
      EncodedImage mImage = EncodedImage
              .getEncodedImageResource("icon.png");
      ApplicationIcon mIcons = new ApplicationIcon(mImage);
  
      ApplicationIcon mIcon = mIcons;
  
      private static Date cDate;
      private String lefteds = "";
      private  LabelField leftd = new LabelField("Not set");
      private TextBoxField tbf = new TextBoxField(200, 30);
     // private GridFieldManager grid = new GridFieldManager(3,3,1);
      //private VerticalFieldManager _manager;
      private LabelField Leftd2 = new LabelField("Not set");
      private int Inum = -1;
  
      //-----------------------------------------------
      private static PersistentObject store = PersistentStore.getPersistentObject(0x1dfc10ec6454eb14L); 
  
      public void saveUserInfo(){
          synchronized(store) {
              store.setContents(leftd);
              store.commit();
          }
      }
  
      public LabelField getlefted() {
          LabelField leftd;
          synchronized(store) {
              leftd = (LabelField)store.getContents();
              if(leftd == null) {
                  leftd = new LabelField("Not Set!");
              }
          }
          return leftd;
      }
      //-----------------------------------------------
  
      MenuItem menuRegister = new MenuItem("Add status icon", 0, 0) {
          public void run() {
              registerIndicator();
          };
      };
  
      MenuItem menuUnregister = new MenuItem("Remove status icon", 0, 0) {
          public void run() {
              unregisterIndicator();
          };
      };
  
      protected void makeMenu(Menu menu, int instance) {
          super.makeMenu(menu, instance);
          menu.add(menuRegister);
          menu.add(menuUnregister);
      }
  
      private void registerIndicator() {
          try {
              ApplicationIndicatorRegistry reg = ApplicationIndicatorRegistry
                      .getInstance();
              ApplicationIndicator indicator =
                      reg.register(mIcon, false, true);
              indicator.setVisible(true);
          } catch (Exception e) {
          }
      }
  
      private void unregisterIndicator() {
          try {
              ApplicationIndicatorRegistry reg = ApplicationIndicatorRegistry
                      .getInstance();
              reg.unregister();
          } catch (Exception e) {
          }
      }
  
      void updateValue(int value) {
          try {
              ApplicationIndicatorRegistry reg = ApplicationIndicatorRegistry
                      .getInstance();
              ApplicationIndicator appIndicator =
                      reg.getApplicationIndicator();
              appIndicator.setValue(value);
          } catch (Exception e) {
          }
      }
  
      void updateIcon(ApplicationIcon icon) {
          try {
              ApplicationIndicatorRegistry reg = ApplicationIndicatorRegistry
                      .getInstance();
              ApplicationIndicator appIndicator =
                      reg.getApplicationIndicator();
              appIndicator.setIcon(icon);
          } catch (Exception e) {
          }
      }
  
      //--------------------------------------------------
  
      public MyScreen()
      {
          try
          {
          this.Leftd2.setText(getlefted().getText());
          }
          catch (Exception e)
          {
  
          }
  
           Background bg = BackgroundFactory.createSolidBackground(Color.LIGHTGRAY);
           setBackground(bg);
  
             XYEdges edges = new XYEdges(20, 20, 20, 20);
             Border border = BorderFactory.createBevelBorder(edges);
  
          // Set the displayed title of the screen
           setTitle("CountDown");
           ButtonField b = new ButtonField("Set CountDown", ButtonField.CONSUME_CLICK);
  
           b.setChangeListener(customListener);
           add(b);
  
           this.tbf.setText("Days to go!");
           add(Leftd2);
  
           add(this.tbf);
  
           if (this.Leftd2 == null)
           {
           saveUserInfo();
           }
  
      }
  
      public void calculate()
      {
          Calendar c = Calendar.getInstance(TimeZone.getTimeZone("GMT"));
          c.setTime(new Date(System.currentTimeMillis())); //now
  
          Date currentdate = c.getTime();
  
          int lefted = (int)((cDate.getTime() - currentdate.getTime()) / (1000 * 60 * 60 * 24)) + 1;
          lefteds = lefted + "";
          leftd.setText(lefted + " " + this.tbf.getText());
          Leftd2.setText(lefted + " " + this.tbf.getText());
          saveUserInfo();
          this.Inum = lefted;
          updateValue(lefted);
  
      }
  
        FieldChangeListener customListener = new FieldChangeListener() {   
  
              public void fieldChanged(Field field, int context) {    
  
                   DateTimePicker datePicker = DateTimePicker.createInstance();
                   datePicker.doModal();
                   Calendar cal = datePicker.getDateTime();
                   Date date = cal.getTime();
                   MyScreen.cDate = date;
                   calculate();
              }
               };
  
      }
  

  It's part * beep * ugly code and also, my application

  There are some problems with it (apart from the fact that its badly coded, etc.).

  Why is my device reboots as a minute after I launch my app (while the app completely closed)?

  Is why I set the status bar would not appear as it should?

  I hope that someone here would be able to help me, I'm sort of stuck... I must be trying to include to the top of my own for almoste time.

  Thank you very much.

  "I have being trying to understand by myself for almost an hour."

  What - only an hour?

  There is a little run before you can walk through this code, suggest a slightly lower rate.

  Two things that I would look at first.

  (1) but first reboot the device.  I'm guessing that you have an older device and you compile using a more recent environment.  Do not forget the applications being forward but not backward compatible, you should develop with a JDE older than the operating system on your device.

  Allied to this I'll make sure your app is not started automatically.

  (2) you seem to try to persist a LabelField:

  public void saveUserInfo() {}
  {Synchronized (Store)}
  store.setContents (leftd);
  Store.Commit ();
  }
  }
     
  public getlefted() {} LabelField
  LabelField leftd;
  {Synchronized (Store)}
  leftd = (LabelField) store.getContents ();
  if(leftd == null) {}
  leftd = new LabelField ("Not Set!");
  }
  }
  Return leftd;
  }

  To be persistent, an object must implement Persistable.  LabelField doesn't do this.  If you want to save a LabelField, what you save is the text (a string that is persistent) and recreate it.

  See how you go after looking through this.  But I recommend to start simple (just count) before adding things as indicators and persistentStore.

• Problems to make the request to the media to work

  HI, having problems with a media query - part text on my page is too great on a smartphone screen.  I would like to reduce it and have used the following in my css, but its no do not influence:

  @media only screen and (max-width: 767px) {}

  {#primarywide}

  font size: 50%;

  }

  }

  You can see what's wrong with it?  The page is the home of Lene Lovich at Stereo Society

  The part I have to reduce is the bit above the horizontal menu, but for now, I'm trying to apply the query to the #primarywide div, which includes most of the content of the page.  I'll create a new div for this bit if I can get the application to work.

  I also realize that the menus are very small, but for now I just want to get this part of the sorted page

  Thank you

  Nothing else is sensitive on this page?

  Make a sensitive page, you must add the meta tag below to pagessection.

  I don't know whether or not your media query will work as I've never tried a combination of requests media width fixed/reagents.

• problems to make animations of edge still work in firefox

  Hello

  Maybe someone can help me with my problem is animation edge (s) in the work of firefox

  In their updates, Adobe said that they fixed the firefox - problem in this blog

  http://blogs.Adobe.com/edge/

  But it still does not work.

  I did a project here with some animations on this site http://edvbv.fermor.eu

  His work well on any browser... also on ios (Ipad, etc.)  but he will not be on firefox.

  Can someone help me... I would be happy for each index :-)

  Thank you

  Martin

  Hi guys,.

  I confirmed that files published initially work correctly in Firefox when I download them to an external server. I'll PM everyone with a Pointant URL to your files so that you can check out them as well.

  If these don't work for you, then it leads me to believe there is some sort of server problem, you meet each.

  Feel free to continue to discuss here or by MP, although I will be next week.

  Thank you

  Joe

• Text find and change the problem CS3 and CS4 scripts

  I use the script below to find text and turn them into others.

  There is one thing the script can't do it for me.

  Example:

  
  (g) management

  (1) that no law that is adopted in the Cayman Islands, a tax to collect profits, income, gains or satisfaction does apply to the company or its activities; and

  (2) that the above-mentioned tax or any tax in the form of rights of succession or inheritance tax is payable in respect of shares, debentures or other obligations of the company.

  Example: (end)

  I had a lot of subjects or points in the passage. And I want to change the space between '(g)' and 'Management' in a tab character. So I revised the plain text file 1texte.

  PS: 1text.txt is filled with what to change.

  text {findWhat: "^ p(^?)" ' "} {changeTo: "^ p(^?)"} ^ t "} {includeMasterPages:true, includeHiddenLayers:true, includeFootnotes:true, wholeWord:false} search all space-dash-space and replace it with an en dash."

  The result is:

  (^?) ^ tManagement

  (^?) ^ tthat any law that is passed in the Cayman Islands, imposing a tax on profits, income, not capital gains or satisfaction applies to the company or its activities. and

  (^?) ^ tthat the above-mentioned tax or any tax in the form of rights of succession or inheritance tax is payable in respect of shares, debentures or other obligations of the company.

  PS: ^ t is a tab character.

  result (END)

  This is not what I want.

  It should be"(g) ^ tManagement'.

  PS: ^ t is a tab character.

  Please someboady help me out revised the script below to change the text in what I want. Thank you very much.

  Here's the script.

  FindChangeByList.jsx
  An InDesign CS4 JavaScript
  /*
  @@BUILDINFO @ "FindChangeByList.jsx" 2.0.0.0 January 10, 2008
  */
  Loads a series of strings delimited by tab characters from a text file, and then executes a series
  Find/replace operations based on the lines read from the file.
  //
  The data file is delimited by tabs, returns to cart that separates records.
  //
  The format of each record in the file is:
  findType < tab > findProperties < tab > changeProperties < tab > findChangeOptions < tab > description
  //
  Where:
  < tab > is a tab character
  findType is 'text', 'grep' or 'glyph' (this sets the find/replace operation type to use).
  findProperties is a recording of properties (text) search preferences.
  changeProperties is a recording of properties (text) of the change preferences.
  findChangeOptions is a recording of properties (text) of the options find/replace.
  Description is a description of the search/replace operation
  //
  Very simple example:
  text {findWhat: "-"} {changeTo: "^ _"} {includeMasterPages:true, includeHiddenLayers:true, includeFootnotes:true, wholeWord:false} find all double hyphens and replace by an em dash.
  //
  More complex example:
  text {findWhat: ' ^ 9 ^ 9.} {' ^ 9 ^ 9 '} {appliedCharacterStyle: 'price'} {include notes: true, include master pages: true include hidden layers: true, any word: false} find $ 10.00 to $ 99.99 and apply the character style 'price '.
  //
  All metacharacters search InDesign are allowed in the properties 'findWhat' and 'changeTo"findTextPreferences and changeTextPreferences.
  //
  If you enter the backslashes in the object findGrepPreferences findWhat property, they must be "escaped".
  as shown in the example below:
  //
  {"findWhat: '"\\s+ "}
  //
  To learn more about InDesign scripting, go to http://www.adobe.com/products/indesign/scripting/index.html
  or visit the InDesign Scripting user to http://www.adobeforums.com users forum
  //
  main();
  main() {} function
  var myObject;
  Ensure that the interaction of the user (dialog boxes display, etc.) is turned on.
  app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
  If (app.documents.length > 0) {}
  If (app.selection.length > 0) {}
  {Switch(App.Selection[0].constructor.) Name)}
  case 'PointInsertion ':
  'character ': case
  case "word":
  case 'TextStyleRange ':
  case "line":
  stops of the "Point":
  case "TextColumn":
  case 'text ':
  case "cell":
  case "column":
  case 'Row ':
  case 'Table ':
  myDisplayDialog();
  break;
  by default:
  An option has been selected, but it was not a text object, so look for in the document.
  myFindChangeByList (app.documents.item (0));
  }
  }
  else {}
  Nothing has been selected, then just search for the document.
  myFindChangeByList (app.documents.item (0));
  }
  }
  else {}
  Alert ("no document is open. Please open a document and try again. ») ;
  }
  }
  function myDisplayDialog() {}
  var myObject;
  var myDialog = app.dialogs.add({name:"FindChangeByList"});)
  {with (MyDialog.dialogColumns.Add ())}
  {with (dialogRows.Add ())}
  {with (dialogColumns.Add ())}
  staticTexts.add ({staticLabel: "beach of research :"});})
  }
  var myRangeButtons = radiobuttonGroups.add ();
  {with (myRangeButtons)}
  radiobuttonControls.add ({staticLabel: "Document", checkedState:true});})
  radiobuttonControls.add ({staticLabel: "Selected Story"});
  If (app.selection [0] .silence! = "") {}
  radiobuttonControls.add ({staticLabel: "Sélection", checkedState:true});})
  }
  }
  }
  }
  Ditto var = myDialog.show ();
  if(myResult == true) {}
  {Switch (myRangeButtons.selectedButton)}
  case 0:
  myObject = app.documents.item (0);
  break;
  case 1:
  myObject = app.selection [0] .parentStory;
  break;
  case 2:
  myObject = app.selection [0];
  break;
  }
  myDialog.destroy ();
  myFindChangeByList (myObject);
  }
  else {}
  myDialog.destroy ();
  }
  }
  function myFindChangeByList (myObject) {}
  var myScriptFileName, myFindChangeFile, myFindChangeFileName, myScriptFile, ditto;
  var myFindChangeArray, myFindPreferences, myChangePreferences, myFindLimit, monarticle;
  var myStartCharacter, myEndCharacter;
  var myFindChangeFile = myFindFile("/FindChangeSupport/1test.txt")
  If (myFindChangeFile! = null) {}
  myFindChangeFile = File (myFindChangeFile);
  Ditto var = myFindChangeFile.open ("r", not defined, undefined);
  if(myResult == true) {}
  Loop in find/replace operations.
  {}
  myLine = myFindChangeFile.readln ();
  Ignore blank lines and comment lines.
  If ((myLine.Substring (0.4) == "Text") |) (myLine.substring (0.4) == "grep"). (myLine.substring (0, 5) is "glyph")) {
  myFindChangeArray = myLine.split ("\t");
  The first field in the line is the findType chain.
  myFindType = myFindChangeArray [0];
  The second field in the line is the FindPreferences channel.
  myFindPreferences = myFindChangeArray [1];
  The second field in the line is the ChangePreferences channel.
  myChangePreferences = myFindChangeArray [2];
  The fourth field is the range - used only text find/replace.
  myFindChangeOptions = myFindChangeArray [3];
  {Switch (myFindType)}
  case 'text ':
  myFindText (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions);
  break;
  case "grep":
  myFindGrep (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions);
  break;
  case 'glyph ':
  myFindGlyph (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions);
  break;
  }
  }
  } while(myFindChangeFile.eof == false);
  myFindChangeFile.close ();
  }
  }
  }
  function myFindText (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions) {}
  Reset the preferences of find/replace before each search.
  app.changeTextPreferences = NothingEnum.nothing;
  app.findTextPreferences = NothingEnum.nothing;
  var myString = "app.findTextPreferences.properties =" + myFindPreferences + «;"»»» » ;
  myString += "app.changeTextPreferences.properties =" + myChangePreferences + ";". " » ;
  myString += "app.findChangeTextOptions.properties =" + myFindChangeOptions + ";". " » ;
  app.doScript (myString, ScriptLanguage.javascript);
  myFoundItems = myObject.changeText ();
  Reset the find/change preferences after each search.
  app.changeTextPreferences = NothingEnum.nothing;
  app.findTextPreferences = NothingEnum.nothing;
  }
  function myFindGrep (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions) {}
  Reset the find/change grep preferences before each search.
  app.changeGrepPreferences = NothingEnum.nothing;
  app.findGrepPreferences = NothingEnum.nothing;
  var myString = "app.findGrepPreferences.properties =" + myFindPreferences + «;"»»» » ;
  myString += "app.changeGrepPreferences.properties =" + myChangePreferences + ";". " » ;
  myString += "app.findChangeGrepOptions.properties =" + myFindChangeOptions + ";". " » ;
  app.doScript (myString, ScriptLanguage.javascript);
  var myFoundItems = myObject.changeGrep ();
  Reset grep find/change preferences after each search.
  app.changeGrepPreferences = NothingEnum.nothing;
  app.findGrepPreferences = NothingEnum.nothing;
  }
  function myFindGlyph (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions) {}
  Reset the preferences of glyph in find/replace before each search.
  app.changeGlyphPreferences = NothingEnum.nothing;
  app.findGlyphPreferences = NothingEnum.nothing;
  var myString = "app.findGlyphPreferences.properties =" + myFindPreferences + «;"»»» » ;
  myString += "app.changeGlyphPreferences.properties =" + myChangePreferences + ";". " » ;
  myString += "app.findChangeGlyphOptions.properties =" + myFindChangeOptions + ";". " » ;
  app.doScript (myString, ScriptLanguage.javascript);
  var myFoundItems = myObject.changeGlyph ();
  Reset glyph in find/change preferences after each search.
  app.changeGlyphPreferences = NothingEnum.nothing;
  app.findGlyphPreferences = NothingEnum.nothing;
  }
  function myFindFile (myFilePath) {}
  var myScriptFile = myGetScriptPath();
  var myScriptFile = File (myScriptFile);
  var myScriptFolder = myScriptFile.path;
  CheminMonFichier = myScriptFolder + CheminMonFichier;
  If (queue (CheminMonFichier) .exists == false) {}
  Display a dialog box.
  CheminMonFichier is File.openDialog ("choose the file containing your list find/replace");.
  }
  Return CheminMonFichier;
  }
  function myGetScriptPath() {}
  try {}
  myFile = app.activeScript;
  }
  {catch (MyError)}
  myFile = myError.fileName;
  }
  return myFile;
  }

  I'm not a writer, but I'll take a stab and try to make a difference here.

  The main problem, in my opinion, is that you use a plain text instead of GREP search. Text gross has no provision to replace the text found by itself, for example, rather than using the codes you entered a literal string. Your search text of ' ^ p(^?) ' means find any character in brackets that occurs after a paragraph break. I would use in GREP ^ \s+ (\(.+?\)) which translates to find an opening parenthesis at the beginning of a paragraph (so he'll find if it happens to be the first character in th in a story) followed by a number any characters up to the first parenthesis (in the case where you have double the figures or double entries letter) followed by ANY white space (in the case where it is not an ordinary space or multiple spaces). Replace $1\t which means the text found in the first set of parentheses in query search followed by a tab.

  Parentheses are special in GREP, they surround groups of terms you want to re-use the text found, so looking for the actual characters you need to 'escape' with the-prefix, so \(.+\) will find a paren open followed by all the characters up to the end last paren in the paragraph. Addition of the? After the + makes research stop at the first closing paren met, although there are several sets in the paragraph.

• A few weeks ago, I started having problems to make the links and buttons to work on various Web sites. I tried the steps help without success. What gives?

  When I go to some web sites, I can't some of their links or buttons to work. For example, I can't "vote" and see the results on the MSN home page or go to my account on the homepage of Ancestry.com. Some links work, but others do not. They do not work in Internet Explorer either. I tried all suggestions for plug-ins and extensions that gives Support of Mozilla. I have run Windows 8.1, have Java as well as JavaScript. I tried to understand what is happening. Any help would be appreciated!

  Ronmissy2008, it's immediate. I'm sorry to hear about you, not being able to access some links, or use the buttons to vote on issues or read articles. " First, I call your Internet service provider and have them check your router '. There is a possibility that it may need an update of the firmware, because you have upgraded to Windows 8.1. Firmware is integrated software that implements network protocols and security for this specific model of hardware device. More Wi-wired routers and are designed to perform a firmware upgrade process. The manufacturer will be able to make improvements to your router. When I arrived AT & T U-verse, my router updated its firmware that took a few minutes to perform. Click on the link for more information on firmware updates:

  (http://compnetworking.about.com/od/wifihomenetworking/qt/firmwareupgrade.htm)

  If your service provider is done with the update of the firmware on the router, then try to update your Windows 8.1 software.

  1.) Open Windows Update by sliding into the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), touching or clicking on settings, tapping or clicking on PC, change settings and then typing or clicking on update and recovery.

  TAP 2.) or click on choose how to install the updates.

  3.) under important updates, choose the option you want.

  4.) under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click on apply.

  (http://windows.microsoft.com/en-us/windows-8/windows-update-faq)

  That's all I could think of at this moment. No doubt call your Internet service provider and let them know you have upgraded to Windows 8.1 and your router needs to be checked. In addition, ask them to update the firmware, if necessary. Then run Windows update. I'll do more research on this issue. Let me know what results you receive after completing the firmware update and windows update.