Problem downloading the updates and cannot run FIXIT
I have a problem with the download of updates and trying to use FIXIT program download but do not open or run and leave a message there's a troubleshooting problem, someone at - it ideas, I tried many solutions but nothing works.
Moved from feedback
Original title: impossible to download FIXIT
Hi Coupar,
From your problem description, I understand that you are not able to download the updates and run the FixIt. Please let me know if you do not experience this problem.
1. What is the KB updates that you are not able to download?
2. what happens when you try to open?
3. do you get an error message?
4. What is the accurate and complete error message you get?
5. what operating system is installed on the computer?
6 have. what troubleshooting measures you tried?
7. the problem only occurs with Windows update fixit?
I suggest you try the following methods.
Method 1: I suggest you perform the clean boot and check if any third-party program is causing the problem.
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
http://support.Microsoft.com/kb/929135
Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.
Method 2: Try the steps from the following link:
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997
Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista
Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.
Tags: Windows
Similar Questions
-
I installed CS5 on macbook pro 10.9.4. I can't get the update to run to update the applications to the latest version. He said that there was an error trying to download the update and try again later.
update directly: http://www.adobe.com/downloads/updates/
-
Solutions and problem reports is saying that hpqsrmon has stopped working properly... I went to download the update and received a warning that this file can potentially harm my computer... Please advise should I run this update...
If you get the warning on the download of an update of HP and IE tries to run the file, as long as you get the file directly from HP, it should be safe to run this file.
According to this link, hpqsrmon is part of the HP PhotoSmart. You can also try to go to the HP support site, the model of your HP to input product, then download the latest drivers associated with your version of Windows.
Once you do this there is a chance that the error will disappear, as the current version may be affected by a bug that has since been fixed by HP in their software.
-
My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?
They are only updated office or all updates?
For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx
then manually download and install the same.
If all updates, perhaps consider the following general tips-
Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.
Method 1: Save the Windows Update files
1. Click Start and type notepad in the box start the search.
2. click on Notepad in the list programs.
3. copy the following commands, and then paste them into the opened Notepad window:
REGSVR32 WUPS2. DLL/S
REGSVR32 STINKS. DLL/S
REGSVR32 WUAUENG. DLL/S
REGSVR32 WUAPI. DLL/S
REGSVR32 WUCLTUX. DLL/S
REGSVR32 WUWEBV. DLL/S
REGSVR32 JSCRIPT. DLL/S
REGSVR32 MSXML3. DLL/S
4. in Notepad, on the file menu, click Save as.
5. in the file type list, click all files.
6. in the file name box, type register.bat.
7. save the Register.bat file to your desktop.
8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
9. try to reinstall updates.http://support.Microsoft.com/kb/958053
See: method 1: save the Windows Update fileshttp://support.Microsoft.com/kb/326253
Method 5: Registry Windows Update engine fileshttp://support.Microsoft.com/kb/971058
How to reset the Windows Update components?Method 2: Download and install Windows Update agent
Windows Update Agent
How to get the latest version of the Windows Update Agent to help manage updates on a computer
http://support.Microsoft.com/kb/949104Information for network administrators about how to obtain the latest Windows Update Agent
http://support.Microsoft.com/kb/946928Click Start, click run, click Browse, navigate to the file you saved and click Open.
Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce
Click run.
Follow the steps to complete the wizard.
Important
To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.
Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.
Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.
D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)
TaurArian [MVP] 2005-2010 - Update Services
-
Automatic updates of Windows
This security update is constantly appearing: a security update for Microsoft XML Core Services 4.0 Service Pack 2 (KB954430) I successfully download the update and then it reappears to be downloaded again.
See the sections «How to get help...» "and 'known issues' here:
http://support.Microsoft.com/kb/954430Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
For enterprise customers, support for security updates is available through your usual support contacts.
Read also: http://support.microsoft.com/kb/941729/Hope this helps, Vincenzo Di Russo
Microsoft® MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003.
My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo -
I downloaded the update and I can't open the package I need help?
I downloaded the update and cannotopen software package, why? I need help...
You have a desktop Mac Pro 2009 with OSX 10.6.3?
-
Problem downloading the update of El Capitan 10.11.4
Hello people. I tried to download the update, but when I downloaded 125 MB, it stops, and then I have to restart the download (at 0%), by restarting the app store, because the update button will not work. Any suggestions?
Thank you.
Try to download the Combo Update 10.11.4 on Apple's site.
-
Windows Update cannot verify the update and resists being fixed!
"The Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. "This is on a HP Pavilion dv6000 / dv6426us. The computer has not been used for 3 (?) years. The system is Vista Home Premium SP1. The browser is Internet Explorer 7, version 7.0.6001.18000. Also HP Total Care Advisor is always installed and running a scan that reports of power is good, but this program is of course also obsolete. Since the resumption of employment, Norton Internet Security has been installed. Also installed PC TuneUp Maestro and Maestro own PC. These three seems to work well. I have already used in troubleshooting tool Windows Update / Microsoft Fix - it. Fixed some things, but the problem persists. Removed many temporary files. Uninstall some programs. Registry cleaning. All this made the computer a lot more lively, but Windows Update still does not work. Also tried Windows Update in safe mode and safe mode with networking: no response. I think that the file is damaged or missing. What can I try next? Can I download and install Windows Update manually (I can't find the place where)? And it's risky to use automatic updates?
Hi David,
Let is follow these methods and check if this help.
Method 1.
Windows Vista Service Pack 2 (SP2) supports new types of hardware, and new hardware standards and includes all updates that have been released since SP1.
Learn how to install Windows Vista Service Pack 2 (SP2): http://windows.microsoft.com/en-in/windows-vista/learn-how-to-install-windows-vista-service-pack-2-sp2
Method 2.
We can refer to this article and check if that helps.
Updates: frequently asked questions: http://windows.microsoft.com/en-in/windows-vista/updates-frequently-asked-questions
Method 3.
Clear the temporary folder of Windows Update
a. close all open windows.
b. click the Start button, click "All programs" and click on "Accessories".
c. right click on "Command prompt" and click "Run as Administrator".
d. in the window "Administrator: command prompt", type "net stop WuAuServ" (without the quotes) and press ENTER.
e. click on the Start button, in the "Search" box, type "%windir%" (without the quotes) and press ENTER.
f. in the opened folder, find the folder named "C:\Windows\SoftwareDistribution".
g. right click on the folder, select Rename and type "SDold" (without the quotes) to rename this folder.
g. always in the window "Administrator: command prompt", type the command "net start WuAuServ" (without the quotes) in the window to restart the service Windows updates.Method 4.
We can try to reset the Windows Update components and check if that helps resolve the issue.
This article helps you reset the Windows Update components. So that we can reset the Windows Update components for you, go to the "Fix it for me" section.
To reset the Windows Update settings, go to the section "Let me fix it myself".
Please see this article for steps and additional information.
http://support.Microsoft.com/kb/971058Let us know if you need assistance with any Windows problem. We will be happy to help you.
-
Problems with the update and download.
I have HP Pavilion dv6500 notebook PC with vista home Premium 32-bit with AMD Athlon (TM) 64 x 2 Dual - Core Processor TK-53 1.70 GHz. It shows that I have downloaded vista sp1 five times and the update continues to ask me to do it again. Now I have installed vista sp2 and it is always ask for me to download sp1. Also I am trying to download my copy of Microsoft Office Home and student 2010 and I get this message:
Installation errors
Setup is unable to proceed due to the following errors:
To install and use this product, you must run the following
operating systems:
x 86 platform
-Windows7
Windows Vista SP1
-Windows XP SP3
-Windows Server 2003 SP2
x 64 platform
-Windows7
-Windows Vista SP1
-Windows Server 2008
Correct the issues listed above and restart the installation.
and after all that, in the right hand corner, you can click on the OK button.
Thank you
Sorry I forgot one other thing, when I download the vista sp1, it will ask you if you agree to, and connect your power cord that she take mite
more than an hour to download, when I click on install as the screen disappears and the update will show immediately that sp1 is installed. I can look in the installed updates and sp1 shows have been downloaded. As I said did it 5 times now. When I installed sp2 he never did this kind of thing. Thanks again
Hello
1. don't you make changes on the computer before the show?
2. When you try to download Microsoft Office Home and student 2010 from?Method 1:
You can try the steps in knowledge base article and check.Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
http://support.Microsoft.com/kb/910339
Method 2:
You can solve the problem by following the steps from the link:
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
http://support.Microsoft.com/kb/947366Method 3:
You can see the steps in the link and check if you are able to install Microsoft Office Home and student 2010.
Microsoft Office 2010 error: "to install and use this product..." »
http://support.Microsoft.com/kb/2267642Method 4:
If the steps above does not help you then, you can perform a clean boot and try to install Microsoft office and check.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article. -
PROBLEMS WITH THE UPDATES AND INTERNET
WHENEVER MY COMPUTER DID AN UPDATE AFTER THE UPDATE I CAN'T GO ON THE INTERNET, I HAVE TO RESTORE TO A TIME BEFORE THE UPDATE, ALSO WHEN I TRIED TO DOWNLOAD JAVA AND FLASH, IT WOULDN'T LET ME ON THE INTERNET, NONE OF THE TWO, I HAVE A LAPTOP TOSHIBA SATELITE MAYBE 2 MONTHS OLD CAN HELP ME A FEW
Hello Felixtorres,
Method 1:
(1) try to upgrade your copy of Internet Explorer to version 7.0
(2) restart your computer
(3) visit http://update.microsoft.com and install updates of missing security for IE7 & stop and try again.Method2:
There might be some important vista .dll are gone corrupt. Please perform the below steps to solve problems.(1) make sure that your account is to have any of course rights or grant your account level "Administrator" rights
(2) from the command prompt, run the command " sfc/scannow " & provide the Vista installation DVD.
(3) analyze your system with antivirus & Spyware software to remove infected files.Also, visit him following MS KB links advanced troubleshooting.
http://support.Microsoft.com/kb/947821
http://support.Microsoft.com/default.aspx?scid=kb;en-us;928228-
-
800B 100 error presents pop box and cannot run Fixit
original title: Error 800B 100
I tried to fix my Pc problems, it said that I had an important message. When I checked it showed me the error 800B 100. I tried to get my system to fix it but he couldn't so I asked for help and he said in turn download the Redieness update system to solve the problem. Frankly I don't really know if it downloaded and if it did there was something else I was supposed to do to try to solve the problem or is it the correct yourself? Was I suppose to cut the my system and restarting? As you can see I don't know much about computers. Please someone help this non computer operator.
Hello
- Facing this problem with all Windows Update?
- You did changes to the computer before the show?
To troubleshoot issues with error 800b0100 with Windows update.
0x800B0100 error code when you use Windows Update or Microsoft Update to install updates
-
I downloaded the updates and some of them were not competing.
Download of updates, some of them do not have!
cfc141,
Please post with the information requested here: what to post in the Windows Update forum
Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.Clean boot your PC, and then run Windows Update.
Reset the Windows Update components
Perform operations of KB883825
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
What can I do to keep my office on and not Virgin?
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
Problem with the updates and creative cloud
I have recently moved from perpetual LR to the LRCC. To do this, I downloaded and installed the program "creative cloud." I also downloaded and installed the Psalm I find I have the latest version of LR, but PS 2015.1.2. I have read many power outages of Adobe FAQ etc, but still problems. On the one hand, my request for clouds to create does not say "Creative cloud", it's called "Adobe Application Manager." Even when I redownloaded the creative cloud program, I get the same result. Many troubleshooting FAQ have to do with the feature on the 'Creative cloud' application, I can't make them on "Adobe Application Manager." No matter what I do, in the Adobe Application Manager or a manual "Check for Update" in Photoshop CC, it tells me that I am aware of nothing else available. Yet he clearly also tells me I have 2015.1.2. I tried signing and return several times. So my questions: 1) is equivalent to Adobe Application Manager creative Cloud / if not, how can I get Creative Cloud. (2) how to upgrade my programs? I know that these are the basis and I searched the FAQ and troubleshooting files without result. Thanks in advance.
Responded. Got an answer through Support Adobe.
-
My question pretty much says it all. Don't know what you want. I have a Windows Vista and you use FIrefox for at least 4 years.
Hi rv7431, don't you worry - you already use firefox 22 which is the latest version available.
the message you see is probably just show up, because you are using google.ca/firefox as your homepage, which has only been maintained up to what firefox 3 and displays now the warning message that you have referred to as no. matter what browser version you are using. change the homepage of Subject: House to answer the question and get the current home page of firefox...
Edit: another thing that is directly related to your original question - you have two present addons, sounding rather malicious (My Web Search 1.1, Performance Cache 1.0). I recommend to Remove...
Maybe you are looking for
-
The tool inspector Web Developer disappeared :(
I used to use the tools > Web Developer > inspection (or inspector, I don't remember exactly) tool. It was there without explicitly install me it and suddenly it is there more. That's happened?Thank you.B.
-
PCMCIA wireless network card is not detected: 1058 error: cannot start service
Help, please! I'm under WXP Pro for over 2 years and I've been connecting to the internet via a pc wireless card in my laptop with no problems PCMCIA slot. Suddenly last week, he started randomly disconnect and reconnect, and now it is gone completel
-
I have an iPhone 16 GB, 6, and recently I received notifications that I have low storage. I deleted more than 400 pictures for free space and when I return to my settings it shows that I have no space available. I don't know what to do and it's reall
-
streaming options went to send video to my tv, where they went or where I can find them?
-
Hi guys,. I recently upgraded a SX20 and link ISDN to the new TC6 and after the upgrade, I can't make ISDN call. I can see and manage the ISDN link from the SX20 configuration web page, but the status of the ISDN connection is: error, SIP not saved.