Problem DVD player in Portege R500 running Win XP Pro

Similar Questions

• Running win XP pro sp2 mouse moves, but everything else does not

  Running win XP pro sp2 mouse moves, but everything else does not respond after a certain time. Just started doing this last month. Had Xp for several years without ANY problems at all.

  Hi BobM202,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  3. do you have security software installed on the computer?

  4. are you referring to freezing except office mouse movement?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• I have adobe CC. How many machines allow the license? I am running Win 7 Pro.

  I have adobe CC. How many machines allow the license? I am running Win 7 Pro. I was wondering if Adobe CC allows multiple machines, and if so, is that what I upload the original invoice number of Adobe CC I have?

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

• Re: Question about the CD/DVD player for Portege M400

  I have a Portege M100 - and the CD-ROM drive does not work.

  Whenever I put a disc in I can just hear the motor turn the disc, but the computer is not picking up the drive. Device Manager picks up flawless.

  It doesn't seem to be any firmware for this sorting (or am I wrong).

  I've seen a DVD player for a M400 on ebay and I was wondering if that would take on my M100.

  Before buying it, I was wondering if anyone knew if it would be compatible. It seems to be OK size wise, but I was wondering if my Portege M100 XP would be able to use it.

  The description for the drive I want to put in the M100 is below:

  Thank you very much for your time. :)

  Description

  DVD +/-RW drive for laptop Toshiba Ultra Slim Bay Portege M400, S100 & Tecra S3

  Compatible models:
  Portege M400, Portege M405, Portege S100-S113, Portege S100-S1132, Portege S100-S213, Portege S105-S1133, Tecra S3,

  The Toshiba Ultra Slim SelectBay DVD SuperMulti Drive is a DVD burner that combines all the functions of a DVD player, DVD recorder, CD burner, and CD player in an ultra slim and ultra light. It gives instant access to CDs and DVDs and fits perfectly into your slot to drive Ultra Slim SelectBay of your Toshiba Portege M400, computer laptop M405, S100 or Tecra S3. It is the ultimate portable storage for mobile users.

  Drive ultra slim and ultra light, fits perfectly in your Ultra Slim SelectBay of your PC drive slot, no additional unit to take on the road
  Dresser based on multiple drive in a compact design: DVD-RAM, DVD + RW, DVD + R, DVD - RW, DVD-R, DVD-ROM, CD, CD/R and CD
  Productivity:
  Backup of important files
  Easy access to CD and DVD based media
  Use for multimedia presentations
  Adapts to your lifestyle:
  Watch your favorite DVD movies
  Play music and games
  Create your own DVDs or music playlist
  Create CDs or DVs with ease
  Transfer data seamlessly between two discs, improve your productivity
  Reduce the time spent to transport and save files
  Slide-in simple, plug-and-play operation
  Includes drag ' n Drop CD + DVD3/B CLiP, Win DVD Creater 2 and the DVD-RAM driver
  Compatible with computer laptop Toshiba Portege M400, M405, S100 and Tecra S3

  Specifications

  Speed (Max):
  Read: 24 x CD-ROM, DVD-ROM 8 x
  Write: CD - R 24 x, CD - RW 4 x, 10 x HS CD - RW, 10 x US CD - RW, 2 x DVD-R, 2 x DVD - RW, DVD + R 2.4 x 2.4 x DVD + RW, DVD-RAM 2 x
  Compatibility: CD-ROM (read), CD-R(read/write), DVD - ROM (read), CD-RW(read/re-write), DVD-R(read/write), DVD-RAM(read/re-write), DVD-RW(read/re-write), DVD + R(read/write), DVD + RW(read/re-write)
  Dimensions and weight: 5 "x 5.5" x 0.4 ". 3.9 oz

  Hello

  According to the paper manuals s user for Portege M100 two drivers of optical discs are compatible with your Portege M100L:
  TOSHIBA SD-C2612
  TEAC DW-224TH

  So if you want to have good player get one of them.

• Satellite P105 carpet * a dvd player does not work with Win 7

  Greetings,

  I need an upgrade on my dvd to my vintage Satellite P105.
  I want the possible fastest dvd burner right now because I'm a fan of film and keep them in digital memory.

  (1) first should I get an external drive or can I get the best performance with an internal dvd replacement of a reseller of parts or Toshiba?

  The problem is when I've upgraded to windows 7 things have changed. I lost my sound, but that solved using a driver inherited Visa as apparently the sound 'Council' on the laptop is for Vista only. Then I found the dvd player which is a mitsu * an internal UJ-450 does not or is extremely slow in saving films, records or files. The available recording software seems also planned for Vista performance was acceptable. Even the dvd burning software does not work.

  (2) so my question for multimedia specialists is: what should be my next move?

  (3) should I go outside and confront the neck of the bottle USB or

  (4) to make the speed of the bus on the internal dvd?

  (5) given an internal dvd is preferable, because it's exactly a dvd-ram/IDE as it is currently, or some other configuration of bus.

  (6) most importantly, what dvd burner would give me 18 x speed with current programs like ConvertXtoDVD and did as a symbol external or - better - as an internal dvd replacement or my slow drive currently?

  Of course, if you could give me a model number and direct me to the sales it would be much appreciated.

  Thank you in advance.

  Rachel_1

  > 1) first of all I should go for an external drive or can I get optimal performance with a dvd replacement internal to a coin dealer or Toshiba?

  You should know that not all internal STRANGE machines are compatible. You will need to use a not compatible and supported and such device could be ordered in a local ASP.
  But it s more expensive as an external CD/DVD device so you could also choose an external that would be compatible with all computers and laptops available.

  (> 2) so, my question for multimedia specialists is: what should be my next move?
  As mentioned. Good option would be to buy an external burner drive ODD

  (> 3) should I go outside and confront the neck of the bottle USB or
  External device are compatible with all computers and are less expensive

  (> 4) go to the speed of the bus on the internal dvd?
  If you have the money for an internal device and want to use it with P105 only then you can also choose an internal burner.

  (> 5) because a dvd internal is preferable, because it is exactly a dvd-ram/IDE as it is currently, or some other configuration of bus.
  As far as I know it s an IDE interface, but the device would support setting master or slave or c - salt. As mentioned, you can buy a Toshiba a recommended.

  (> 6) especially, what dvd burner would give me 18 x speed with current programs like ConvertXtoDVD and did as a symbol external or - better - as an internal dvd replacement or my slow drive currently?
  Point 5 of the air)

• Portege R500 - install Win XP - no hard drive detected

  Hello

  I just bought a new Toshiba Portege R500 notebook - 12 H with Windows Vista, and I would like to format the hard drive and install Windows XP instead.

  I have a Windows XP CD (the one from my old PC), I insert the disk and start the laptop computer on the installation of the Windows XP CD to load, I get the screen asking me "push F3 to quit, entry to install XP" (as usual).
  But when I click on 'install', it says no hard drive has been detected, and I wonder if I have any additional drivers.

  How is it possible that my 120 GB HD is not detected? It is in a format that does not know Windows XP? Can I get a driver, how can I install it? Can I upgrade the bios?

  Please help me ;)

  Thanks for all,

  Missing driver SATA.
  Very good description how to prepare the CD of facilities, you can find HERE.

  This Toshiba document could be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  If you have any other questions please let us know.

  Good luck!

• DVD player not working not not on Satellite Pro U400-142

  My DVD player does not work. I insert a disc, you can hear the drive works for some time, but then nothing happens. I checked the Device Manager' - under readers of CD-ROM/DVD-ROM it shows: MAST * A DVD-RAM UJ862AS, but there is a black exclamation point in a yellow circle next to it. I opened the dialog box 'Properties' and under the status of the device, he wrote:

  "Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  I would try try to resolve the problem by reinstalling the driver. I checked Toshiba site for the driver, but can't find it.

  I would be very grateful if someone could give me some ideas on how to sove this problem.

  Thank you

  P

  What you can do is follow:
  Remove the optical drive from Device Manager drive, restart your laptop.
  The reader should be acknowledged and properly installed. If the same thing happens again try it please > http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

• Install an SSD in an Inspiron 3650 I7 6700 16 GB Ram 2 TB hard drive Amd R9 380 graphic and running Win 7 Pro 64-bit

  Hello:

  I have the above referenced PC and want to add an SSD (boot with OS drive).  I would like to make this my c: drive ssd.  I want to keep the Windows 7 operating system.  I made the disarmament recovery disks I opened the PC.  I don't want to win 10.

  Could someone with their infinite knowledge teach me throughout the procedure with pictures if possible?  What parts do need me if any?

  Thanks in advance

  Tom

  I thought I was doing a 512 GB SSD.  The system came with Win 10 Pro 64 bit installation floppies, but I'm used to and prefer to use Win 7.  The idea of cloning seems interesting.  In fact, it looks to the ticket.  What cloning software is recommended.  The priority of the boot in the BIOS change after cloning?  I am concerned with what type of SSD should I purchase (interface, transfer rate, etc.), what cables, if any, and which adapters will be necessary?

  At work, I have all my computers run with SSD (OS/startup) and they run like rockets.  This new computer runs great, but with a SSD for the start, program files, "scratch disks", I'll be in the drive hyper.  I'd be in Mary for a bargain price.

  Yet once again, thank you very much for you answer quickly.  I have several Dell optiplex computers in office and did not have a problem.

  Thank you once again to Osprey

  Tom

• How can I determine if my system runs Win XP Pro 64-bit?

  I use Win XP Pro and works very well. I was wondering if I could run on my Pentium 4 3.04 Ghz, Northwood Hyperthreaded 64 bit version?

  I tried the command systeminfo and it opens a window, reads my system and immediately closes before I can read the results. There is another parameter of the command line that would keep the window open?

  Which is why upgrading to 64 - bit, I run a few games that would take advantage of my 4 gigs of RAM if I had the upgraded operating system, also think to come to upgrade my computer soon and wanted first to get the new OS first and get it to run, if possible. If I buy it and can not test to make sure I have a viable Microsoft OS and functional, I'll be stuck with it and no available return. It's probably a few months before I finished it to get parts for my new computer. I want XP Pro because I'm used to and because it has less bloating than the newer OS.

  Thanks for your help!

  Click on the link below and download SIW. Save the file to your desktop. Double-click the file to open the application. Once open scroll to the bottom of the list in the left pane and click on the symbol next to the material. The content will grow under hardware. Click info CPU. Information about your processor will be expanded in the right pane. There you will see the number of bits for your processor.

  http://www.Filemail.com/DL.aspx?ID=PWWYJKAZDKNXHVE

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Cannot download Microsoft Security Essentials. Running Win 7 Pro

  Running Win 7. Uninstalled all anti-virus software (I think). Has tried various ways to download MSE, but get the message "Windows Program Compatibility Mode not supported by this program.   0x8004FF71 error code.

  Help, please... I'M RUNNING WITHOUT PROTECTION.

  Anyway Panda should be uninstalled before moving to 10 then reinstalled after,

  Personally, I'd skip any upgrade if you really count on a stable system in which 10 is no where near stable like 7

  Most of the time victory-10 requires a facility clean, just to be in a stable way

  This kind of stability will be lost soon after loading the programs...

  What ever you decide to do not create or associate an account of $ M with your username :D

• Problem with Fingerprintsensor on Portege A600 with Win XP and Win 7

  Hello

  I bought a new Portege with Win Vista on it and Win Xp on a CD Revovery. It has worked on my new laptop. Then I installed Win 7 on it without making a backup of my system of work. It was a big mistake. I downloaded Win 7 of the Toshiba homepage divers. But the Fingerprint Software means that there is no sensor. The driver has been installed. After much trying, I used the recovery CD. Now I have WIN XP on my system with the same problem. It was a recovery with all the drivers CD. He had to work. But it does not work.

  Someone at - it an idea? Could someone help me?

  Best wishes

  Martin

  Hallo Martin

  You are right. It should work fine if there is no problem with the sensor itself.
  Is it difficult for you to test it with Vista image too?
  I mean if the situation is the same, maybe you should contact the nearest authorized service.

  Can you start fingerprinting software?

• Installation problem DVD Rom that uses Adobe AIR on Macbook Pro

  I am trying to install a DVD-Rom that uses Adobe AIR on my Macbook Pro. First of all, I get a message saying "(Installer Adobe AIR command line)" then I get a message saying 'the Adobe AIR version cannot be installed because a newer version already exists on your system'. " As soon as I finish this message Adobe AIR Application Installer and it seems that if I need to choose a different installation package, but I don't know what to do next. Can someone help me with this?

  Exactly what version of programs you install from your DVD, and what is the exact number of your Mac operating system?

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• CD/DVD does not start automatically. Win. Pro 8

  Inserting a disc, it will run automatically. I have to go to my computer and click on the disk icon and start the music or program manually?

  I put the disc to play / start automatically.

  Hello

  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-8/AutoPlay-FAQ

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• The HP OfficeJet Pro 8600 does support e-print? I am running Win 7 Pro 64-bit

  Can you please tell me: the HP OfficeJet Pro 8600 does support e-print?  I can't find or generate or figure out how to create an e-mail address for this printer.  Thank you.

  Hello BoPeepLamb,

  8600 printer OfficeJet does support ePrint. You can access the e-mail address of printers by allowing Web Services to the main display on the printer. The icon is located on the top left corner of the screen and looks like the sheet of paper with circles behind it. Before you can enable Web Services, you must ensure that you have a valid internet connection first.

  Once you have enabled Web Services, you should have a print sheet mobile printing with a printer code and the link to http://www.eprintcenter.com where you can create an account and customize your e-mail address printers.

  If you have any other questions do not hesitate to reply to this message and I'll try to find an answer for you.

• Vostro 200 running Win 7 Pro 64-bit

  Computer does not recognize my sound card integrated and said that Microsoft HD Audio.  Headset will not save.  Any help appreciated.  Thank you

  See here:

  http://dellwindowsreinstallationguide.com/driver-sets/Vostro-desktops/Vostro-200-Windows-7-64-bit/