Problem - edges of digital triggering slows down during the fast rotations

Similar Questions

• Slowed down during the rendering process - 770 GTX GPU

  I am a file - this is a PSD with animated layers (position, opacity) with video overlays - totaling a little more than 2 minutes. Before I got the velociraptor hard drive 10krpm, it took 11 hours for export. Thinking that it was the hard drive (which was probably a big bottleneck even when problem) I had a new one just for this.

  After obtaining my project on the velociraptor and set up as a working drive, I started to make the same file again.

  It's happened for 4 hours, with the GPU sitting idle (0%), but its use is to 1867 according to my GPUTweak software memory.

  Reading of mercury for the project is set to GPU. Whole reason I got a higher end video card is for the first use the GPU to accelerate the process, and it doesn't seem to be the case.

  by "rendering", I mean I have red bars in the upper part of the chronology, break-in numpad in a hurry.

  * Edit * after a strike at this point, my rendered file and I waiting over SOUL and results are the same - memory GPU used but no GPU

  Any ideas/suggestions? Is this normal?

  My system:

  I7 - 2600K @3. 40 GHz

  ASUS P8Z77 - V LX motherboard

  24 GB RAM

  ASUS GTX770 - DC2 OC 2 GB (with latest drivers)

  Seagate 2 TB hdd (OS and applications)

  Velociraptor 500 GB hdd (scratch, media release)

  Windows7 x 64

  all programs adobe updated to 2014 CC

  The maximum dimensions made me think on the number of tracks - there was no mention of tracks max in the article dimensions Max Mine had many trails, who sat to an opacity of 0% of layers.  So I had indicated to do a cleanup, to see if I can squeeze little speed this way.

  My primary sequence was of 36 titles, nested in another sequence with more than 4 tracks, and one of these titles has been nested has 6 tracks more... I deleted all the stuff opacity 0 to condensed my time line, by removing the used. I got the 36 tracks up to 20, and...

  BAM! 3 minutes to make! on the machine that took more than 8 hours. The problem was I was too sloppy with all pose and must have exceeded a limit of the track.

• Firefox slows gradually (during the day) to the point that it is not exploitable. Restart works, but sick of rebooting. Tried implementing up-to-date and refresh, disable the addons

  Windows 7 with the latest updates. Latest Firefox 38.0.1.
  Typing slows down to the point that it's frustrating and I need to restart firefox. When the computer reboots, all right. Then after a day or two, it slows down again. I have run Norton malware scans. Hardware acceleration disabled. No other applications running.

  Almost ready switch to Chrome...

  Suggestions?

  Thanks to all those of you who looked at my problem and made suggestions to solve them.

  I decided to go there and try Chrome.

  Since it was not an agreement on the solution to my problem solid (different approaches have been proposed) and I had already tried one number of other approaches based on firefox help, I decided that I had invested enough time to solve the problem and that I would move.

  I always use firefox on my other computer with Windows Vista because I do NOT feel the creeping slowness problem and that he had to constantly restart firefox to regain normal performance on this computer. It uses the same version of firefox.

  Thank you all...

  -Simon

• HP ENVY x 360-15-w100nt: wi - fi connection slows down when the charger is not plugged

  Hello

  My wi - fi connection slows down when the charger is not plugged in. Correct the wireless lan drivers. So far, I appreciate all kinds of advice for this problem.

  Thanks in advance

  Hello @JohannNewma,

  Welcome to the HP support community! I read your post and wanted to tender hand can help you!

  I understand that you notice a decrease in speed wireless on the x 360-15-w100nt laptop computer ENVY when running off the battery voltage.

  You can check and adjust the power options on the system as it is probably trying to save battery power by reducing wireless performance.

  If you're still having problems, you can follow the steps described in this document to troubleshoot the network settings and internet wireless.

  Please get back to me how that happens. To show that you like, or are grateful for my post, please click the Thumbs up below.

  Thank you!

• ENVY 100 printer D410 - screen says "Do not, power down during the update" permanently.

  I'm a Mac user Mavericks 10.9.1 running on a Mac Book Pro.

  I have a HP ENVY 100 D410 printer that works your for a few years.

  Recently, the LCD screen of the display on the printer offered, "there is a new driver. You want to update? "(Yes/no)

  (Or something close to that.)

  Unfortunately, I chose 'yes '.

  The printer then tried to update, but eventaully the LCD screen on the printer displays a flashing message:

  "Do not feed, down during the update"

  The printer now flashes just this screen continuously. The LCD screen will not display anything other than this message.

  The printer works when connected by cable and wireless. (Airprint works very well).

  I can scan documents, I can print pages, I can even access printers "Web page.

  But the LCD touch screen control panel is 'stuck' in flashing update message.

  I can't find any way to clear this error and allow the printer to complete the update.

  Help. Please, I beg you.

  Hello

  There is a fix to resolve the specific problem, but I'm afraid it is only available for earlier operating systems under OS X 10.5 and 10.6, Windows XP, Vista or 7.

  I you suggest to get a computer with any operating system supported, install the latest version of the software on the HP site using a USB and then follow the steps.

  The latest version of the software can be found below (the basic software should be sufficient):

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&OS=4062&product=4073738&softwareitem=MP-92513-1&sw_lang=&

  Make sure that you carefully go through the procedure to the installation section in the patch download page.

  Hope that helps,

  Shlomi

• Message "do not power down during the update"control panel screen not fade.

  Product name: HP ENVY 100 e - All - in - One Printer D410a

  Product no.: CN517A

  The message "Do not power down during the update" on the control panel of the printer refused to erase and remained perpetually disaloowing acess the Menu home for other actions as photocopies etc.

  I see.  I found this utility that will help you to solve the problem.  It seems the printer lost connectivity during an update firmware and glitch out.  The utility should take care of it.  Let me know what happens.

• shows am improve ready system me ready start Hello, after installing "Setup for the windows modules" my pc one slowed down at the start. That do I do? Thank you.

  Hello, after installing "Setup for windows modules" my pc one slowed down at the start. That do I do? Thank you.

  Hello Turkish styleozdemir.

  The forum in which you've posted is for English only. Please select your language by clicking on the globe on the page down to the left to post your question in the language of your choice. If you can't find the desired below language, support for additional international sites options are by following the link below:
  http://support.Microsoft.com/common/international.aspx
  Thank you!

• My integrated camara stops or slows down during live broadcasts

  new inspiriom dell camera stops or slows down when im live broadcast. What can I do to speed up the process

  Hello
   
  I thank for posting in Microsoft Community Forum, be assured that we would do our best to help you.
  
  Please answer the following questions that would help us provide a better solution.
  1. is specific to a particular Web site question?
  2 is specific to a particular browser?
   
  If the problem is with Internet Explorer, I suggest you
  Open Internet Explore mode without modules and try to open the site by searching the steps as described in method 2 and check:
   
  Method 1:
  Open Internet Explorer mode no. Add-on and check if this solves the problem. Follow the steps mentioned below:
  a. Click Start.
  b. Select all programs.
  c. click on accessories.
  d. Select System Tools.
  e. then click Internet Explorer (No Add-ons).
  
  Method 2:
  Optimize Internet Explorer, and then check if it solves the problem. See the following article to do the same thing:
  How to optimize Internet Explorer
  http://support.Microsoft.com/kb/936213/no
  
  This article also refers to IE9.
  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
   
  Method 3:
  I would also say you update the driver for the camera integrated on the manufacturer's website and check if that helps.
   
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  If you have any questions do not hesitate to answer, we would be happy to help.

• Sound stops and slows down after the installation of Microsoft Vista SP2

  Its malfunction after installing Microsoft Visa SP2

  I have a HP laptop. downloaded Microsoft Vista SP! and SP2.  Since installing the sound stops and slows down and jump to the high state that Adobe Player slows down the computer.  I remember checking the updates in the control panel and Microsoft Vista SP1 and SP2 has been selected and windows poped place provided a specific that warning after installation of SP1 and SP2, respectively, the user can experience sound defects or.  This window also provided a specific procedure to correct the problem of noise; However, I have noticed no procedure to revisit this window.  Need help, thank you!

  I have a HP laptop. downloaded Microsoft Vista SP! and SP2.  Since installing the sound stops and slows down and jump to the high state that Adobe Player slows down the computer.  I remember checking the updates in the control panel and Microsoft Vista SP1 and SP2 has been selected and windows poped place provided a specific that warning after installation of SP1 and SP2, respectively, the user can experience sound defects or.  This window also provided a specific procedure to correct the problem of noise; However, I have noticed no procedure to revisit this window.  Need help, thank you!

  Here's a thread on these forums on how to fix this: http://social.answers.microsoft.com/Forums/en-US/vistamedia/thread/f16247af-313a-418d-915e-6403012c25eb

• HP LaserJet Enterprise 600 m602 slow printing during the passage of the trays

  Hello world!

  On the HP LaserJet Enterprise 600 m602, who met breaks in print jobs during the passage of the trays?  Example, we are going to print invoices and we have a rule configuration that prints on plate 2 with the exception of the last page that is perforated paper tray 3.  So, in a job of 5 pages, pages 1-4 are the tray 2 paper... then page 5 is perforated tray 3.  There is a 2 to 3 seconds when the last page is extracted from tray 3.  If the invoice is only 2 pages, the print job appears super slow.

  This printer was working fine with no delay until we applied the firmware 2302786_433718.  Now, the delay is very noticeable.  We do not know if it was intentional or not in the new firmware.

  We use the latest PCL 5 Universal Print Driver.  The only thing that has changed is the firmware.  We even tried a full reset of firmware.  Problem is still there.

  I worked with HP support, but we were told to wait... the next version of firmware that may or may not fix everything.

  Any help or insight is appreciated.

  We have this same problem with our printer HP Laserjet 600 M602.

  Could solve by setting the Print Mode to all papertypes that are used for the same parameter.  We thought initially can be a problem, issue or firmware of the Board of adjustment, but in reality was the paper type settings. We set up printer for ordinary paper into tray 2 and tray 3, default regular bond has been set at light mode printing and binding for the print mode binding. Each time dial-up printer and trays, he stops to configure different paper type settings.

  Hopefully the other help solve their printing problems

  Enjoy your day,

• VTEncoderXPCService the process using 100% CPU, slowing down of the MacBook Pro to a crawl

  I'm running OS X 10.11.4 on my mid-2009, 2.26 GHz Core 2 Duo 13 - inch MacBook Pro, updated updated to 8 GB of RAM. For these last days, a process called 'VTEncoderXPCService' has been constantly running like crazy on my Mac, using about 150% CPU. This slows down my Mac to a crawl, especially Safari, where I usually end up with beach balls every 20 to 40 seconds. I need help [figure out what is the cause, as my Mac is basically unusable because of the drop in performance.

  This is a background process that converts the video in a photo or iMovie library. If an iOS device is connected, please disconnect. In the iCloud system preferences pane, uncheck that marked Photos. The activity should stop.

• Satellite P300-150: slow processor during the test with the id tool intel

  Hello

  I just bought a Satellite P300-150 and it was working well in general... play lotro with few problems, but not in dx10 cos it chuggs as hell.

  I noticed he had a genuine problem of warhead of the crisis in the recommended settings, but thought it was just cos he couldn't do.

  But I downloaded the untilty of Intel processor id and he gave the following results... as you can see on the bottom 4 lines the processor is very upset with the expected results for the frequency and buses (fewer than half actually).

  Intel recommends if there is a huge gap, I need to contact the manufacturer... which brought me here.
  Any advice before contacting tech support directly?
  Just maybe I can play warhead after all! : o).

  Utility to identify processors Intel (r)
  Version: 3.9.20080910
  Timestamp: 2008-10-03 22:27:03
  Number of processors in system: 1
  Current processor: #1
  Cores per processor: 2
  Disabled cores per processor: 0
  Processor name: Intel (r) Core (TM) 2 Duo CPU T8300 @ 2.40 GHz
  Type: 0
  Family: 6
  Model: 17
  Step by step: 6
  Review: 60 ° C
  CPUID level: has
  L1 Instruction Cache: 2 x 32 KB
  L1 Data Cache: 2 x 32 KB
  L2 Cache: 3 MB
  Packing: FC-PGA/BGA
  EIST: Yes
  MMX (TM): Yes
  SSE: Yes
  SSE2: Yes
  SSE3: Yes
  SSE4: Yes
  Enhanced Halt State: No.
  Execute Disable Bit: Yes
  Hyper-Threading technology: No.
  Architecture Intel 64: Yes
  Virtualization Intel (r) technology: Yes
  Expected processor frequency: 2.40 GHz
  Frequency of the processor reported: 1.07 GHz
  The expected system Bus frequency: 800 MHz
  The reported system Bus frequency: 357 MHz

  Hello

  Satellite P300-150 was equipped with the Intel Core 2 Penryn T8300 processor.
  This processor supports Enhanced Intel SpeedStep technology.

  Enhanced Intel SpeedStep technology allows the system to dynamically adjust the tension and the processor core frequency. This means that the CPU doesn't always work with maximum performance, but only if it of needed. This helps minimize the heat dissipation and allows to secure the battery energy!

  The CPU seems to be slow check with the Intel ID tool ;)

  For more information on Intel Enhanced Intel SpeedStep Technology check out these articles from Intel:
  http://www.Intel.com/CD/channel/reseller/ASMO-na/Eng/203838.htm

  http://www.Intel.com/support/processors/sb/CS-028855.htm

  Welcome them

• HP Envy stuck with message "Do not feed, down during the update"

  I tried to install the updates from the menu of the printer, but now he constantly says: "do not, power down during updates. He did all day yesterday until I have is growing impatient and returned it works, but still displays the message once it lights. This has now been reading all night.

  I read somewhere a hard reset would work, but can't find anywhere how to do this.

  Can I print a Network Setup page and page of test very well.

  I can get Internet access to the printer.

  I would like to be able to see the printer menus again please.

  Kind regards

  Mike.

  The solution obtained from the phone HP Service Center:

  Firmware update:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-92884-2&cc=us&DLC=en&LC=en&OS=219&product=4073738&sw_lang=

• Animate edge falls down during the collage

  Hi all

  I use Edge animate 1.5. Until today, the experience has been great! Today, however, whenever I try to paste or duplicate something, I get the message "an error has occurred."

  Can someone help me?

  Thank you!

  Hi, Andrew.

  I was able to reproduce the bug on my side.  The good news (for me), it is already fixed in the latest version of Animate.  It happens also on Mac and Win, then you are probably impossible to escape.  That being said, there is another way to do exactly what you want to do: copy your item from your components panel or mounting and right-click in the same pane.  Select "paste special" > "Paste it all."  Your active and all transitions will be pasted as if you had selected "duplicate".  I just confirmed that the accident does not happen in this case.

  Thanks for the presentation of a report as detailed - it really helped to be able to reproduce the problem on my side.  I hope that the solution is simple enough to use in daily work.

  See you soon,.

  -Elaine

• System slows down during playback of 3 channels simultaneously

  Hi all!

  I'm at the stage of beginning with Labview (7.0, old I know ;() and try to encode a routine that reads data force 3 - axis load cell (400 Hz sampling frequency), it filters with low-pass filter simple software (cut 100 Hz) and the future written down into a data file if I use Matlab for plotting.) I met strange delay when I read the three channels at the same time and I'm trying to understand what has hurt.

  Here are the steps in my code (I used > example as a base):

  (1) I've initialized global channels, in which I put across the voltage according to the diagrams provided manufacturing

  LC is physically connected to SG23/SC-2345 combo, which, in turnes, connected to the PXI-6221 DAQ card

  (2) I've initialized a virtual channel for pxi-6221 so I can have control over its gain (+/-0 .5v, +/-1v, +/-5v, +/-10v) and the value of the gain for + / 1v, gives me the precision desired (at least I hope for that)

  (3) wired global channels to the block of PXI

  (4) set at 400 Hz sampling rate

  (5) acquisition of start-up

  (6) Split into three channels signal and connected a VI for filtering to one of them

  The thing is, once I have started the program, everything is "moving" so slow that made me wander if I do things right.

  Would be very happy comments

  My VI:

  The only thing you don't mention changing is the number of samples to be read. The VI you have posted a number of samples to read the value of 4000. If you change the sample rate of 400, then of course it will take 10 seconds to acquire as many samples.