System slows down during playback of 3 channels simultaneously

Similar Questions

• Problem - edges of digital triggering slows down during the fast rotations

  Hi all. I have problem to understand. I want to measure the pressure with two strain gages on 90 degrees (NI 9237 half bridge II) and I engine with metal plate on it with 52 teeth (gear) to measure on each tooth of the strain. For the rotation, I use NI 9401 digital input.

  I need for example 1000 samples from the first digital edge to the second. (on the metal plate). I try to start trigger. In slow speed (turn around with the hand) of the metal plate, everything is OK. But if I turn around the metal plate digital fast triggers edges slows down. During a cycle on the metal plate on the cost of slow speed me 52 digital edges 1000 sampels by edge (metal plate is with 52 teeth), but rely on fast speed on me 25 edges. This problem is sync of the digital inputs and the analog inputs. I made the example with DAqmx Vi express. I've implemented on digital imput and then count me in each tooth regardless of speed and everything is OK, but when I buid trigger of strain on the edges of quick release rotation speed slows down.

  Can someone help me with this?

  Thanks before.

  So you're collecting samples from 1000 to 10000 samples per second. Which takes 100 Ms. If your triggering edges occur more quickly than the interval of 100 ms, some of them will be missed.  If you run faster than a cycle all 5.2 seconds your gear plate with 52 teeth, some triggers will be produced before the end of the previous data collection.

  What is the fastest speed that you will not sping palte metal?

  Lynn

• My integrated camara stops or slows down during live broadcasts

  new inspiriom dell camera stops or slows down when im live broadcast. What can I do to speed up the process

  Hello
   
  I thank for posting in Microsoft Community Forum, be assured that we would do our best to help you.
  
  Please answer the following questions that would help us provide a better solution.
  1. is specific to a particular Web site question?
  2 is specific to a particular browser?
   
  If the problem is with Internet Explorer, I suggest you
  Open Internet Explore mode without modules and try to open the site by searching the steps as described in method 2 and check:
   
  Method 1:
  Open Internet Explorer mode no. Add-on and check if this solves the problem. Follow the steps mentioned below:
  a. Click Start.
  b. Select all programs.
  c. click on accessories.
  d. Select System Tools.
  e. then click Internet Explorer (No Add-ons).
  
  Method 2:
  Optimize Internet Explorer, and then check if it solves the problem. See the following article to do the same thing:
  How to optimize Internet Explorer
  http://support.Microsoft.com/kb/936213/no
  
  This article also refers to IE9.
  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
   
  Method 3:
  I would also say you update the driver for the camera integrated on the manufacturer's website and check if that helps.
   
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  If you have any questions do not hesitate to answer, we would be happy to help.

• Why my volume goes up and down during playback of music on YouTube?

  I listened to a few songs on YouTube channel & the volume goes up and down by itself.  How can I stop this? My computer is Lenovo & its pretty new, nothing wrong with it.  Are there other buttons that I miss?  Do not use to be like this, please help?  I want to just listen to my music without having irritated by this problem :(

  Hello

  1 did you do changes on the computer before the show?
  2. not this problem only occurs when you play music on YouTube?
  3. what browser you use to access YouTube?

  Method 1:
  You can update the latest version of the flash player and check:
  http://get.Adobe.com/flashplayer/

  Method 2:
  You can open Internet Explorer, preferably to a page that needs to play sounds.
  a. click on the volume icon in the windows system tray (in the lower right corner of the taskbar) and then click on the link titled "Mixer".
  (b) a panel will open showing the levels of individual volume of applications running that play sounds (you may need to scroll right to see all of them).
  c. ensure that belonging to Internet Explorer volume level is set correctly.
   
  Method 3:
  If the problem persists you can perform the clean boot, this problem may occur if a third-party program, the origin of the problem. Placing the computer in a place clean start State and resolve the problem. You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 4:
  Alternatively, you can perform the steps in knowledge base article:
  The video problems with Internet Explorer
  http://support.Microsoft.com/kb/2532294

  You can also visit the links:
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

• Probable cause of the system slows down suddenly?

  Hello;
   
  Your advice and help would be greatly appreciated.
   
  (1) the laptop became irritating suddenly slow!
  Slow start of Windows, open files running of MS anti-virus, slow slow slow internet access, the desktop icons disappear and reappear at the beginning of every task, etc. a moment.
   
  (2) I have run a scan complete, just in case there's a virus.  It took ~ 2 hrs to scan ~ 1 240 000 elements.
  Also, I ran Disk Defragmenter in case space is the problem.
   
  (3) the unit is:
  ... Toshiba Satellite P30 laptop, processor 3.06 GHz, Pentium 4, x 86 processor
  ... Win XP Home SP3
  ... Hard drive 100 GB, 80% available
  ... 1.84 GHz, 512 MB RAM
  .. peripheral .no (not even a printer) attached to the unit.
  (Am I missing some relevant info?)
   
  (4) I also watched the start menu.  Nothing has changed, always the same 6 programs on the start menu.
   
  Any suggestion (s)?
   
  Thank you.
  Monir

  Thank you Jose andRobear to your quick and thoughtful answers.

   

  ( 1) Please allow me little time to consider the proposal detailed Jose and Robear advice that MS is well aware of the problem and (hopefully) will come (soon) with an update to resolve the problem.

   

  ( 2) in the meantime, I wonder if anyone of you has experience with the use of the freeware "CCleaner v2.34.1200:

  http://www.filehippo.com/download_ccleaner/

  The developer claims that she cleans the system and optimizes the performance of the PC and it's free.

  It's absolutely fantastic!

  I downloaded and installed the package, but have not yet run it!

   

  ( 3) the "CCleaner" seems well designed and comprehensive.

  It has many options for:

  .. .cleaning Windows & Applications

  .. .cleaning registry & Startup

  ... Deleting temporary Internet files & programs

  ... Bleach unused hard drive

  ... Removing obsolete software

  ... etc.

   

  ( 4) the difficulty (for me) is that you cannot select the option buttons at random without knowing or at least have an idea about the consequences.

  The problem could get worse!

   

  ( 5) for example, I've checked the box to deleteCookies or to theIndex.dat files (which I don't know what they are for, in the first place!).

  It will probably improve the performance of the system (speed), but could also block me of some web sites and would need re-subscribe, passwords, etc.

  Deleting Index.dat files can simply affecting the functionality of certain applications.

  I don't think that trial-and-error approach would work here.

   

  Will study more carefully "CCleaner".

   

  Any comments?

   

  Kind regards.

  Monir

  monirg,

  CCLEANER: This is my configuration:

  Uncheck the box:

  In INTERNET EXPLORER:

  Last download location

  History of AutoComplete form

  In WINDOWS EXPLORER:

  Recent documents

  In the SYSTEM:

  Clipboard

  Memory dumps

  Windows log files

  Shortcuts on the Start Menu

  Desktop shortcuts

  In the commercial category, uncheck the WindowsDefender. With this checked remove history when the last scan was performed.

  Cleaning DO NOT USE ANY Advanced options. DO NOT TOUCH THE REGISTRY OR TOOLS. At least not for now.

  Make sure that you go to Options > Advanced Options anduncheck the box ' only delete the files in of Windows Temp folders older than 48 hours "before running a scan.

  Suggests to save changes until you get to know and feel comfortable.

  Personally, CCleaner is the only program that I apply to any computer that I repair. I have never had any undesirable results to use this program. It is on the shy side of what it aims to achieve and is not very aggressive in its changes. It allows you also to save changes and reapply them if you have any of the disastrous consequences by allowing the changes.

  That being said - I can't say that the way I never realized no improvement after cleaning the registry!

• slow down the operations of independent channels

  I have a string of characters to about 40000 to code in HTML. The first problem is that HTML-code is not native to Actionscript, and I can not even find a simple HTML coder for (2 OR 3). It is fine, even if I can quickly make my own... The second problem is a loop with about 40000 iterations for takes about 15 seconds: for (i = 40000; I > = 0; i-) {}... .not acceptable.

  Within the loop for what I was going to swap out of range of characters with HTML entities. As the loop is too slow, what other options do I have? Regular expressions? There is at least > 100 characters to check and their codes are simply the character code... How can I easily put it in a regular expression without including literally all the characters and their replacement values? Is there another way? Thank you.

  for the non-ascii part, you can avoid a loop for and use:

  s.Split("&").join("&#&;") .split (' ' ').join("&#';"). Split("<><;").split(">"). Join ("&#>;");

  I don't know how intensive cpu which would be with a 40 k string, but it is worth a test.  If this test works well:

  for the non-ascii characters, I would put everyone in an array and loop through that array using a split-join for each of them.  and you can add & ' <> in the table if this is equivalent so you can analyze concise your channel.

• Volume goes up and down during playback on Qosmio G55-Q802 MP3

  I just bought a new laptop from Toshiba with Vista Home premium.

  When I'm playinh of MP3 files, the volume goes up and down.

  When there is a soft part in the song the volume increases and when instruments of start to play more strong volume goes down.

  Can anyone help me please with this problem?

  Hello

  First of all, it would be really interesting to know which laptop model you have

  In addition, I would like to know if you have tested the MP3 files using different actors

  Have you noticed the same sound problem using WinAmp or another free software?

  Check it!

• Slowed down during the rendering process - 770 GTX GPU

  I am a file - this is a PSD with animated layers (position, opacity) with video overlays - totaling a little more than 2 minutes. Before I got the velociraptor hard drive 10krpm, it took 11 hours for export. Thinking that it was the hard drive (which was probably a big bottleneck even when problem) I had a new one just for this.

  After obtaining my project on the velociraptor and set up as a working drive, I started to make the same file again.

  It's happened for 4 hours, with the GPU sitting idle (0%), but its use is to 1867 according to my GPUTweak software memory.

  Reading of mercury for the project is set to GPU. Whole reason I got a higher end video card is for the first use the GPU to accelerate the process, and it doesn't seem to be the case.

  by "rendering", I mean I have red bars in the upper part of the chronology, break-in numpad in a hurry.

  * Edit * after a strike at this point, my rendered file and I waiting over SOUL and results are the same - memory GPU used but no GPU

  Any ideas/suggestions? Is this normal?

  My system:

  I7 - 2600K @3. 40 GHz

  ASUS P8Z77 - V LX motherboard

  24 GB RAM

  ASUS GTX770 - DC2 OC 2 GB (with latest drivers)

  Seagate 2 TB hdd (OS and applications)

  Velociraptor 500 GB hdd (scratch, media release)

  Windows7 x 64

  all programs adobe updated to 2014 CC

  The maximum dimensions made me think on the number of tracks - there was no mention of tracks max in the article dimensions Max Mine had many trails, who sat to an opacity of 0% of layers.  So I had indicated to do a cleanup, to see if I can squeeze little speed this way.

  My primary sequence was of 36 titles, nested in another sequence with more than 4 tracks, and one of these titles has been nested has 6 tracks more... I deleted all the stuff opacity 0 to condensed my time line, by removing the used. I got the 36 tracks up to 20, and...

  BAM! 3 minutes to make! on the machine that took more than 8 hours. The problem was I was too sloppy with all pose and must have exceeded a limit of the track.

• System slows down

  What should I do with framework .net 2 (service Pack2), 3 (service pack 2) and 3.5 (service pack1) while having the .net framework 4 extended and it customer profile

  Hi kashif007rke,

  Please see the next thread about the removal of previous versions of the .NET Framework:

  http://social.msdn.Microsoft.com/forums/en-us/netfxsetup/thread/bb33e88f-97af-4B8C-9740-be27d0407c9f

  To increase the performance of your computer, see the following article:

  http://www.Microsoft.com/athome/Setup/optimize.aspx

  I hope this helps!

• Satellite S500-10F - slowed down and need BIOS update

  Hello, I would like to know if anyone can help.

  I work for a Borough Council IT Department, so it is quite safe to say that I know a fair bit on THIS and the side material things. We had an about 12 laptops Toshiba Satellite S500 delivered, 11 x S500 - 11 c and 1 x S500-10F. As we do not yet support windows 7 so he must rebuild in Windows XP, install the drivers etc, and send them to schools.

  All S500 - 11 c were built and work without any problem at all. The only difference I see is that the model 10F doesn't have bluetooth so that the model 11 c. Model 10F take image ghost, created from the 11 c, but he likes to be restart every 5 minutes approximately and is extremely slow.

  So I rebuilt the model 10F using our licenses CD XP SP3 Microsoft and started to install drivers etc. When I installed the software of card reader Ricoh the laptop again slowed down (about 5 minutes to start Windows). I used to have a similar problem with a model on the A300 range and I've updated the BIOS which cured the problem. I downloaded the one and only BIOS update on the Toshiba site for the S500 and when I want intsaller, he returned with a message that says "this computer is is not supported.

  If someone at Toshiba can tell me where I can get an update of the BIOS that works for my S500-10F or indeed why my system slowed down to a snails pace after having installed the Ricoh card reader software I would be very grateful. I removed the software and now and disabled without success card reader devices.

  Thank you very much

  Warren Poole

  I can see for this Satellite Pro model 2 drivers are available. The second is O2Micro controller version 1.1.4.207 card reader.
  Have you tried to install it?

• Audio stuttering during playback of DVD on the Satellite A100-111

  Hello.
  I have a similar problem to that resolved here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24485

  Basically, if my A111 DVD Player reads a disc (when the orange light is lit), the system slows down and sometimes freezes.
  As a result, the audio and video to DVD stutters.

  I tried to install the DVD-RAM drivers, but the problem is still there.
  The problem exists with every DVD I try to play, be it data, video, disc - ROM, -r or RW.

  I just bought 200 + â? ¬ of original DVD and I am very mad because I can't play.
  Please help me.

  Thank you very much.

  Hey Buddy,

  do you already have a system recovery on your machine? I mean, ok sound sometimes a little too raw reinstall the operating system, but I had so many times of the probs with the drivers, so they have really screwed up my system and after reinstalling everything worked fine again.

  Just a suggestion in a situation like yours.

  See you soon

• Video games slow down the computer even when closed?

  Recently, I replaced the NVIDIA GeForce 6150 SE with a 8400 GS PCI Express so that I can play Call of Duty 4, Fallout 3, Microsoft Flight Simulator X, etc. After installation of the new equipment, several problems came. I have a 32-bit of Windows Vista Home Premium.

  1. the "Windows experience index" could not evaluate the 8400 GS.
  2. Windows could not find the driver for the 8400 GS software automatically, then I found myself from www.nvidia.com.
  3. Although games played much more quickly after any where between 5 and 30 minutes of games, the computer goes REALLY slow. Yet once I close the games via the Task Manager, the computer continues to accuse. Icons highlight more slowly, for example. It remains for 5 to 10 minutes before returning to its original state.

  It could have been a problem plant material so I reinstalled the driver/3 times already.
  I have cleaned the registry of the computer, defragmented it and the two drives C and D.
  Problem persists.

  Help, please? Otherwise I'm going to get a new video card that is not too good.

  Hi decapen10,

  Looks like you're having overheating problems. Everything works fine until the internal temperature reaches a certain point, then the system slows down to protect the processor failure. When you leave the high demands of the games that you play, the card can cool down a bit and things pick back up. Take a look at your map and see if there's a fan built in. If this is not the case, try to join one. If so, try to take the case out of your pc to see what happens. If it works fine, then you must install some additional cooling in your case to dissipate heat coming builing. The other scenario is that you could have a defective 8400 GS. You could try to Exchange if it is still under warranty.

  Here is a link to a site discussing these issues:

  http://h30434.www3.HP.com/PSG/board/message?board.ID=monitor&thread.ID=243

  I hope this helps. Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• During playback the music through Windows its multimedia player breaks and slows down in XP. How can I fix it?

  During playback the music through Windows its multimedia player breaks and slows down in XP. How can I fix it? All the drivers are up to date.

  Hi EBmusic,

  I see that you have a published similar thread .

  ·         Have you tried suggested the same steps?

  Try the suggestions and see if it helps.

• Satellite Pro P100 - 465 Vista - video playback stutters, slows down

  I'm at my wits end :-(

  updated the drivers uninstalled - re installed drivers - drivers (nvidia does not even list the Go 7600 graphics card for vista - used another recommmened site on this site) - changed the resolution of the screen, changed bit screen depth, removed anti virus - a lot of system resources still available on each reading single video file slows down and speeds up or stutters especially bad when I have full screen.

  Tried different video files and DVD, different codecs and players, vlc, media player classic, display the time of Nero, WMP etc etc, all are made. Looks like others have had similar problems and thought that maybe they had other ideas to solve this one?

  Is there something that I have not tried? Please let me know... Thanks for your help

  I found a thread on something very similar.
  Have a look here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23614

  Maybe it helps GUYS good luck

• Latest Vista updates have picked up my use of the internet and slowed down my system

  Last week, I had several automatic updates. In the meantime, updates have been loading on my computer all landed and froze. After the updates, I'll have a terrible time in AOL. The program has slowed down and often gives me an error message that the system is not responding. I contacted AOL who gave me many suggestions that I follow, but I still have problems (more my overall system is slow now). Says to contact Microsoft. It may be a problem with acceleration. I don't have these problems until the updates installed this week.

  Now my system restore no longer works. I can't go back to before the updates. What can I do?

  Hi andrewgpig,

  Thank you for writing to Microsoft answers Community Forums.

  Possible cause would be that updates might conflict with other programs on the computer. Also could have damaged some system files on the computer.

  I suggest to try in safe mode and check the performance of the pc first.

  To start the computer in safe mode, do in the link below

  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  If it works fine in safe mode, then find the program that is in conflict. The link below shows you how to do a clean boot

  http://support.Microsoft.com/kb/331796

  If the steps above fail. Try to do a scan sfc

  Try to run a SFC scan, to do this, follow these steps:

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  Type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  I hope this helps. .

  Let us know if this doesn't work or if you need further assistance.

  Kind regards

  Sharath

  Microsoft Answers Support Engineer