Problem exporting of artboards as individual files.

Similar Questions

• Book PDF Export - purge disappears;  The individual files are very well

  I have a problem with the purge after the export of my book. I have an InDesign book including 8 files. After preflight, when I select "Export book to PDF", lost the document background parameters are not met. The purge is cut on the crop marks.

  "Export as Adobe PDF" settings are:

  Marks the selected printer:

  Landmarks of crop Type: default

  Registration marks weight 0.25 pt

  Color Offset 0.125 bars

  Purge and Sug:

  Use Document bleed settings (which are all 0.125)

  After that I exported this (AS A BOOK) bleeding do not arise. Everything is cut on the crop marks. But if I export the individual files that make up the book, it appears just as expected, that the same export Adobe PDF Settings.

  Thanks a lot for your help. I am at a loss for what to do.

  How about if you uncheck use of bleeding doc and manually enter?

• "File > open recent" does not work.    Second problem: impossible to drag individual files or folders, from one place to the other.

  I recently installed Lightroom 6 (stand-alone version).  I have two separate issues: firstly the "file > open recent" does not work.  The cottage my last files but when I click on one of them, nothing happens (don't close the existing catalog, nothing new opens).

  Second problem: I can't drag individual files or folders, from one place to another within the section "Files" from the library.  I did this on a regular basis with older versions of LR so I know how it's done - it does everything just not in this new version.

  Thank you

  Chris

  I think that a Mac person will have to answer your question, I do not use Mac computers.

• Mix and export of separate multitrack session files

  Hello

  Is there a solution for radio producers, export of the hearing 3.0 separated files. For example, I have a few parts of the radio in a single session program - each consists of a headin', the loop, the voicetack and the HeadOut ({willing on different tracks}.) Now, I don't want to choose one by one and export - I wan't to export all in this session as mixed, separate files at one time.

  Is is it possible?

  Thanks in advance for your response.

  Bartek
  

  It is correct. I just had a very attentive to your multitrack available look, and I think I can see why you have a problem with that. I think what it is is a solution, but you have to do the last part of it to change the view.

  What you need to do is first to open the list of markers and change all your points of reference in ranges of marker (highlight in the list, and there is an icon at the bottom to allow you to do). Now, mixing integer, including markers and metadata, export and have it opens in edit mode. Now, if you open the list of markers in the edit mode, you will find that there is an additional icon at the bottom of the it - one that lets you batch files. It will take the name of marker for the file names and will save ranges mark as individual files, with other options as well. If you mix the entire file at once and split it later. To do this, you must highlight firstly all reference lines in the list.

  Who reached what you want?

• Export of layers in Illustrator files

  Hello

  It seems that there are some people who want to do what I do. I have a graphic made up of different elements in CS4. I have distributed to each of these elements to separate the layers by layers / release to layers (sequence). For an opinion on what I'm trying to do, I have 136 layers and I don't want to save each of them individually by hand!

  I would now like to each of these layers that save Illustrator files.

  There are two factors that I need to consider:

  1. As these individual files will be drawn to Apple Motion 5 comes alive, it is important that the script or plugin to save the files retains the positioning of the element compared to the artboard.
  2. Is it is not possible to maintain the positioning of the element compared to the artboard, I have placed 2, 1 pixel by 1 pixel "dots" in the corners opposite the artboard on a locked, individual layer. The script or the plugin could alternatively export every element layer in a new file, including these two points in each file to give movement to work with limitations.

  I met many plugins that save as png or PDF layers, but what is important, I need to keep the images as vectors. I also need to keep the elements positioned in the artboard.

  I also met two scripts here: http://forums.Adobe.com/message/2759051 , but the first script seems unnecessary (in my case, it saves 136 files with all items) and the second script gives me an error of syntax for the line " " " -get a list of the files in the files to be processed in the sourceFolder".

  Any advice you could please lend would be most appreciated.

  Thank you very much.

  Try this

  /*
  * Description: An Adobe Illustrator script that export each layer as a file separated. For Illustrator CS 4 +.
  * Use: Name of the layer is added in the name of the file. Rename the layers if necessary.
  * It is a first version that has not been sufficiently tested. Use at your own risk.
  * License: GNU General Public License Version 3. (http://www.gnu.org/licenses/gpl-3.0-standalone.html)
  *
  * Copyright (c) 2010, William Ngan
  http://www.metaphorical.NET

  This program is free software: you can redistribute it and/or modify it
  it under the terms of the GNU General Public License such as published by
  the Free Software Foundation, either version 3 of the license, or
  (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty
  MARKET QUALITY or ADEQUACY has a SPECIAL USE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  with this program.  If not, see http://www.gnu.org/licenses/>.

  */

  var doc = app.activeDocument;
  var docname = (doc.name.split('.')) [0] ; name
  var doc_artboard = doc.artboards [0] .artboardRect;

  If (app.documents.length > 1) {}
  Alert ("Please close other documents and rerun the script ');
  } else {}

  var ok = confirm ("Please save your original file before continue.\n\nLayer files will be saved in the same folder as the original file. Original file will be closed without saving.\n\nContinue? ») ;

  If {(ok)

  prepare layers
  for (var i = 0; i)
  doc. Layers [i]. Visible = false;
  }

  go through each layers
  for (var i = 0; i)
  app.activeDocument = doc;

  If (i > 0) doc.layers [i - 1] .visible = false;
  doc. Layers [i]. Visible = true;
  doc.activeLayer = doc.layers [i];

  saveAI (doc.path, doc.activeLayer.name, i);
  }

  Close the original file without saving changes
  doc. Close (SaveOptions.DONOTSAVECHANGES);
     
  }

  }

  function saveAI (path, name, id) {}
     
  var currlayer = doc.layers [id];
  var g = currlayer.groupItems.add ();
  Group (g, currlayer.pageItems);
     
  var t = g.top;
  var l = g.left;

  var newdoc = app.documents.add (doc.documentColorSpace, doc.width, doc.height);
  newDoc.artboards [0] .artboardRect = doc_artboard;
  var newlayer = newdoc.layers [0];
     
  g.Duplicate (newlayer, ElementPlacement.PLACEATBEGINNING);
  newlayer.pageItems [0] .top = t;
  newlayer.pageItems [0] .left = l;

  path.changePath (docname + "_" + name + ".ai");

  newdoc.saveAs (path);
  newDoc.Close (SaveOptions.DONOTSAVECHANGES);
     
             
  Wait for the new file to save and close it before you continue.
  A (if possible) callback function be better that a while loop for sure.
  While (app.documents.length > 1) {}
  continue;
  }
  }

  function group (gg, items) {}

  var newItem;
  for (var i = items.length - 1; i > = 0; i--) {}
         
  If (items [i]! = gg) {}
  newItem is items [i] .move (gg, ElementPlacement.PLACEATBEGINNING);.
  }
  }
  }

• Problem exporting to tiara

  Hello

  I use a data acquisition card 6070E read the output of a sensor. I have a problem, export the data from the labview to tiara program.

  When my vi stops running, it displays the information on a waveform graph. I right click on the waveform graph and select "Export data to DIAdem", it opens the tiara, but randomly sets some values to zero, the duration and the actual values... It is sometimes only one or two data points, but sometimes (as pictured), it completely distorts the data. I have attached the vi and also an image of how it exports to tiara... The diagram should be with 10 cycles of a sinusoid of 10 Hz.

  Is there something I can do?

  Thanks in advance.

  Hi Sadegh,

  It of about a year since I looked into it, but I think all you need to do is to completely stop LabVIEW, use the attachment VI to replace the existing file on your hard disk, and then restart LabVIEW.

  ...\LabVIEW 2010\vi.lib\ExportToExcel\exportToDIAdem.vi

  Let me know if this doesn't

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• How can I individual files contained in a llb file md5 sum?

  How can I individual files contained in a llb file md5 sum?

  I'll assume you know how to get the value of MD5. If it isn't... http://forums.NI.com/T5/LabVIEW/MD5/m-p/1067558

  The LLB acts as a container. So, you will need to extract the files of the LLB and save them as individual files, so that you can calculate the MD5 checkusm for each file. LabVIEW is a built-in LLB Manager which can be used to convert a LAW degree to a directory of files.

  Note: If you use the LLB to store your screws during development, it is a BAD idea (control of source code, a file corruption problems corrupts all LLB, nightmare of development distributed, etc...). LLBs must be used for the distribution of the code, and if you need a MD5 for that, you could just provide the MD5 for the Bachelor of LAW, rather than the MD5 for each file.

• I am the owner of everything on my pc I do not have the special permissions for individual files and I am denied access

  permissions of origin title: special

  I am the owner of everything on my pc I don't have special permissions for some individual files that I find quite strange. It also means that I can't delete some files. I tried to access the files when I started from a different hard drive, but still can not remove. While I followed all procedures to address this issue, I still do not end with special permissions. Is it possible to modify or delete the files from the MS DOS window or is there something that I am missing. I also found it seems to be an 'unknown user' in the permissions area, and when I try to delete or change this 'unknown user' and a second show. 1 then said who is denied access, but the other has access. No matter what I have I can not get rid of it! And file sharing is disabled disabled! Help, please

  In Vista, many files can not even to administrators. Some are to protect the user from making mistakes (like many in the Windows directory and in your personal profile).  Some are points of junctionhttp://msdn.microsoft.com/en-us/library/bb968829 (VS.85) .aspx which are there for backwards compatibility and should not be modified in any way (and certainly not deleted) or you may not be able to use your programs or may even damage the system to the point where it will need to be reinstalled).  You shouldn't need special permits to delete a file if you have all the rights, but special permissions can block access and that's sometimes how it blocks even administrators.  Keep in mind that XP administrators had access more than them in Vista - blocked is not necessarily a problem, but intentionally by developers of Vista.

  However, if you're talking about files that you devriez have permission, then the following information about the ownership and permissions can help you.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  I hope this helps.  If this isn't the case, after return and we'll get the exact path of these files to make sure that you really can visit his profile and try adding special permissions.  I suspect that the problem is that everyone is denied access and blocking everyone - but we'll check (if necessary).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• To scan multiple photos on HP c309 series as individual files; the box for enable is grayed out.

  I use a HP Photosmart C309A all in one.  I use Windows 7. I have several photos to scan and want to sweep as individual files.  I did already several months without problem.  The box which should allow me to do so is not available to check.  It is grayed out.

  Anything to try would be appreciated.

  Hi @Mamusworld,

  Welcome to the HP Forums!

  I noticed that you want to scan multiple photos on your HP Photosmart c309 as individual files, but the box is grayed out. I'm happy to help you!

  It sounds as if there is a problem of driver/software with your printer software. I recommend the following:

  1. Uninstall the software. Uninstalling the printer software.
  2. Clean boot the computer. How to perform a boot in Windows.
  3. Re-install using the HP print and Scan Doctor.

  Hope this helps and have a great day!

• Can I delete individual files in a backup of Windows 7?

  Hello, I was wondering if it is possible to delete individual files from a backup. I like to keep my backups tidy and get rid of files that I would need is more if I need to restore.

  Thank you
  Mike

  Hi Mike,.

  First of all, it can normally be done, but it's not simple (and much more complicated/difficult {to the point where some people will say "no, it cannot be done"} if it is an image backup full rather than a full backup; and even with a full, more complicated backup but just more effort if differential backups indivdual also play a role, since you may need to check each of them also).

  That said, the answer will also depend on what you used as backup destination.  If it was and external HARD disk or a separate internal HDD or a network location, then you will probably be OK.  If you used a set of DVD or CD, it of extraordinarily difficult or, if the drives are not the RW types (but guys R), impossible (since you cannot make changes to them once they are written).

  See this thread to see if it helps: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/delete-individual-files-from-a-backup/5dbbe219-e062-4a11-9d87-a8ec26d97174.  Don't forget to use Browse for the files, as you see not individual files with browse for folders.

  If this does not help, then I recommend research and/or validation of help in the TechNet Forum dedicated specifically to the problems of backup here: http://social.technet.microsoft.com/Forums/en-US/windowsbackup/.

  In my case, since I the backups periodicals full image as well as weekly full backups (with daily differential backups) AND maintain multiple copies as "backup backups' so to speak, it would be even more complicated.  If I felt the need to do (but I don't see a good reason, it would be NECESSARY that desperately and leave just the time to cure the problem), I would probably remove the file from the system and just launch a new series of backups that although a lot of time, maybe more simple in the end.

  Good luck!

  Kosh

• How can I view individual files that have been backed up? I will restore all files, not just a few specific?

  Recently, I backed up my files, such as registered and deleted from my HARD drive.  Restarting resolved a number of issues.  Now, I need to restore specific files a few I.e. 'my music '.  How can I find and restore individual files or folders WITHOUT restoring those that were responsible for the problems that CAUSED problems.  I want to remove most of the backup and save a few folders/files.

  How can I watch them?  I tried to 'Search' for 'my music' and some specific mp3 and names without success.

  See if this will help.

  http://blogs.technet.com/b/filecab/archive/2009/11/12/recovering-your-files-in-Windows-7.aspx

• Problem exporting Lightroom cc

  I'm having a problem exporting photos in Lightroom CC after the last update.  I get a message "the file could not be written.  Any ideas?

  This occurs because of a permissions problem. The folder that you want to export towards not permissions writable by your user name.

  Change the folder to which it exports or check the permissions on the folder that you want to use, and give your user name of the permissions to read & write.

  You use a Mac, right?

• Problem with several adapters and Jar file included in a service.

  Hi all

  I'm new here and I am ready to work with the VMWare client sdk. I have already started and exported several adapters to implement the full functionality that I need. However, I get an error:

  Request context failed to create 'com.management.serviceprovider' in ' 1.0.0 version. org.springframework.beans.factory.BeanCreationException: error creating bean with name 'DatacenterConfig': calling the init method failed; nested exception is org.springframework.beans.factory.CannotLoadBeanClassException: cannot find class [com.adapters.Datacenter.ClusterConfigAdapterImpl] for the beans with the name 'ClusterConfigAdapterImpl' defined in URL [bundleentry://281.fwk1147580192/META-INF/spring/bundle-context.xml]. nested exception is java.lang.ClassNotFoundException: com.adapters.Datacenter.ClusterConfigAdapterImpl finds do not bundle [com.management.serviceprovider]

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1455)

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519)

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456)

  to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:294)

  at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:225)

  at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:291)

  at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:193)

  at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:591)

  at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:918)

  to org.eclipse.gemini.blueprint.context.support.AbstractDelegatedExecutionApplicationContext.access$ 1600 (AbstractDelegatedExecutionApplicationContext.java:60)

  to org.eclipse.gemini.blueprint.context.support.AbstractDelegatedExecutionApplicationContext$ 4.run(AbstractDelegatedExecutionApplicationContext.java:325)

  ...

  This error occurs very often and it's strange because I place the cards together in a same way. Here is the OSGI layer and contaxt bundle files:

  Context Bundle:

  < name of the bean = "ClusterAdvancedAdapterImpl" class = "com.adapters.Datacenter.ClusterAdvancedAdapterImpl" >

  < constructor-arg ref = "dataServiceExtensionRegistry" / >

  < / bean >

  < osgi:service id = "DatacenterConfig" ref = "ClusterConfigAdapterImpl".

  interface = "com. VMware.vise.Data.Query.PropertyProviderAdapter"/ >

  < osgi:reference id = "dataServiceExtensionRegistry".

  interface = "com. VMware.vise.Data.Query.DataServiceExtensionRegistry"/ >

  And I really don't know why this isn't a job.

  The second problem is that I have another project with classes and I want to export it to a jar file. When I do this I also want to include this pot in the bundle, but when I change the ant file it does not work on virgo.

  Any help will be appreciated.

  Kind regards

  Stefan

  For option 2 which he question in post above, you can use the piece of code below in the Ant script in the target of the compilation at the end.

  --------

  -----

• Exported images are of large file size, but the small screen

  

  Something has changed in my export settings, and I can't understand it.  If I insert a file into any application (i.e. PowerPoint, Word, Publisher) that I exported to LR5.7 before last week, the end images (image of female left) look if I export a new image, the file size is large (10 MB), but when I insert into any application, the image itself is extremely low (male right image). I know that's not the image itself, because I've tried it with images that have worked in the past which has worked and now have the same issue. If I try with resize in the image program itself just gets very distorted and pixelated. Any thoughts on what is wrong or what I screwed. I've also included a picture of my LR export window

  Maybe Word etc read the 5000 pixels per inch setting in the exported file and timing of small file in the application.  Change to 200 or something and see what happens.  This has not test so it is maybe not the right direction to solve the problem.

• export the query to txt file, cannot open the help URL

  Hello
  All the
  I need export a query to txt file
  I search on this forum and found a a thread can solve this problem
  But I can't open this URL.
  < div class = "jive-body of the message" > < div class = "jive-quote" >
  
  http://spendolini.blogspot.com/2006/04/custom-export-to-CSV.html
  < / div >
  Can you kindly send that content on export txt to my Email?
  
  My email is: [email protected]
  Thank you very much.
  
  Saven

  item sent via gmail...

  Thank you

  Tony Miller
  Webster, TX

  There are two types of pedestrians - the living and the dead.

  If you answer this question, please mark the thread as closed and give points where won...